scholarly journals CNN BASED RETINAL IMAGE UPSCALING USING ZERO COMPONENT ANALYSIS

2017 ◽  
Vol XLII-2/W4 ◽  
pp. 27-31 ◽  
Author(s):  
A. Nasonov ◽  
K. Chesnakov ◽  
A. Krylov
Keyword(s):  
Medical Image ◽  
Visual Analysis ◽  
Preparation Method ◽  
State Of The Art ◽  
Medical Image Processing ◽  
Main Idea ◽  
Objective Evaluation ◽  
Component Analysis ◽  
High Quality

The aim of the paper is to obtain high quality of image upscaling for noisy images that are typical in medical image processing. A new training scenario for convolutional neural network based image upscaling method is proposed. Its main idea is a novel dataset preparation method for deep learning. The dataset contains pairs of noisy low-resolution images and corresponding noiseless highresolution images. To achieve better results at edges and textured areas, Zero Component Analysis is applied to these images.<br><br> The upscaling results are compared with other state-of-the-art methods like DCCI, SI-3 and SRCNN on noisy medical ophthalmological images. Objective evaluation of the results confirms high quality of the proposed method. Visual analysis shows that fine details and structures like blood vessels are preserved, noise level is reduced and no artifacts or non-existing details are added. These properties are essential in retinal diagnosis establishment, so the proposed algorithm is recommended to be used in real medical applications.

UBAR

2021 ◽  
Vol 20 (3) ◽  
pp. 1-25
Author(s):  
Elham Shamsa ◽  
Alma Pröbstl ◽  
Nima TaheriNejad ◽  
Anil Kanduri ◽  
Samarjit Chakraborty ◽  
...  
Keyword(s):  
Resource Management ◽  
Quality Of Experience ◽  
State Of The Art ◽  
State Of Charge ◽  
User Preference ◽  
Management Approach ◽  
High Quality ◽  
Trade Off ◽  
Run Time

Smartphone users require high Battery Cycle Life (BCL) and high Quality of Experience (QoE) during their usage. These two objectives can be conflicting based on the user preference at run-time. Finding the best trade-off between QoE and BCL requires an intelligent resource management approach that considers and learns user preference at run-time. Current approaches focus on one of these two objectives and neglect the other, limiting their efficiency in meeting users’ needs. In this article, we present UBAR, User- and Battery-aware Resource management, which considers dynamic workload, user preference, and user plug-in/out pattern at run-time to provide a suitable trade-off between BCL and QoE. UBAR personalizes this trade-off by learning the user’s habits and using that to satisfy QoE, while considering battery temperature and State of Charge (SOC) pattern to maximize BCL. The evaluation results show that UBAR achieves 10% to 40% improvement compared to the existing state-of-the-art approaches.

Thermal Laser Separation – A Novel Dicing Technology Fulfilling the Demands of Volume Manufacturing of 4H-SiC Devices

2015 ◽  
Vol 821-823 ◽  
pp. 528-532 ◽  
Author(s):  
Dirk Lewke ◽  
Karl Otto Dohnke ◽  
Hans Ulrich Zühlke ◽  
Mercedes Cerezuela Barret ◽  
Martin Schellenberger ◽  
...  
Keyword(s):  
Experimental Data ◽  
Process Control ◽  
Tool Wear ◽  
Large Scale ◽  
State Of The Art ◽  
Scale Production ◽  
High Quality ◽  
Large Scale Production ◽  
Laser Separation

One challenge for volume manufacturing of 4H-SiC devices is the state-of-the-art wafer dicing technology – the mechanical blade dicing which suffers from high tool wear and low feed rates. In this paper we discuss Thermal Laser Separation (TLS) as a novel dicing technology for large scale production of SiC devices. We compare the latest TLS experimental data resulting from fully processed 4H-SiC wafers with results obtained by mechanical dicing technology. Especially typical product relevant features like process control monitoring (PCM) structures and backside metallization, quality of diced SiC-devices as well as productivity are considered. It could be shown that with feed rates up to two orders of magnitude higher than state-of-the-art, no tool wear and high quality of diced chips, TLS has a very promising potential to fulfill the demands of volume manufacturing of 4H-SiC devices.

scholarly journals Automatic Microaneurysms Detection Based on Multifeature Fusion Dictionary Learning

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Wei Zhou ◽  
Chengdong Wu ◽  
Dali Chen ◽  
Zhenzhu Wang ◽  
Yugen Yi ◽  
...  
Keyword(s):  
Image Processing ◽  
Diabetic Retinopathy ◽  
Dictionary Learning ◽  
Medical Image ◽  
State Of The Art ◽  
Critical Role ◽  
Medical Image Processing ◽  
Unified Framework ◽  
Semantic Relationships ◽  
Detection Approach

Recently, microaneurysm (MA) detection has attracted a lot of attention in the medical image processing community. Since MAs can be seen as the earliest lesions in diabetic retinopathy, their detection plays a critical role in diabetic retinopathy diagnosis. In this paper, we propose a novel MA detection approach named multifeature fusion dictionary learning (MFFDL). The proposed method consists of four steps: preprocessing, candidate extraction, multifeature dictionary learning, and classification. The novelty of our proposed approach lies in incorporating the semantic relationships among multifeatures and dictionary learning into a unified framework for automatic detection of MAs. We evaluate the proposed algorithm by comparing it with the state-of-the-art approaches and the experimental results validate the effectiveness of our algorithm.

The Playout Control Management

2011 ◽  
pp. 689-702
Author(s):  
Mirko Luca Lobina ◽  
Luigi Atzori ◽  
Fabrizio Boi
Keyword(s):  
Quality Of Service ◽  
Service Provider ◽  
Service Providers ◽  
State Of The Art ◽  
Main Idea ◽  
The State ◽  
Ip Telephony ◽  
Open Standard ◽  
Control Management

IP Telephony provides a way for an enterprise to extend consistent communication services to all employees, whether they are in main campus locations, at branch offices, or working remotely, also with a mobile phone. IP Telephony transmits voice communications over a network using open standard-based Internet protocols. This is both the strength and weakness of IP Telephony as the involved basic transport protocols (RTP, UDP, and IP) are not able to natively guarantee the required application quality of service (QoS). From the point of view of an IP Telephony Service Provider this definitely means possible waste of clients and money. Specifically the problem is at two different levels: i) in some countries, wherelong distance and particularly international call tariffs are high, perhaps due to a lack of competition or due to cross subsidies to other services, the major opportunity for IP Telephony Service Providers is for price arbitrage. This means working on diffusion of an acceptable service, although not at high quality levels; ii) in other countries, where different IP Telephony Service Providers already exist, the problem is competition for offering the best possible quality. The main idea behind this chapter is to analyze specifically the state of the art playout control strategies with the following aims: i) propose the reader the technical state of the art playout control management and planning strategies (overview of basic KPIs for IP Telephony); ii) compare the strategies IP Telephony Service Provider can choose with the aim of saving money and offering a better quality of service; iii) introduce also the state of the art quality index for IP Telephony, that is a set of algorithms for taking into account as many factors as possible to evaluate the service quality; iv) provide the reader with examples on some economic scenarios of IP Telephony.

Tactile evaluation of down jacket fabric by the comprehensive handle evaluation system for fabrics and yarns

2020 ◽  
pp. 004051752097720
Author(s):  
Yuan Tian ◽  
Yi Sun ◽  
Zhaoqun Du ◽  
Dongming Zheng ◽  
Haochen Zou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Principal Component Analysis ◽  
Evaluation System ◽  
Principal Component ◽  
Objective Evaluation ◽  
Component Analysis ◽  
Quality Level ◽  
Fabric Handle ◽  
Good Agreement

Down jacket fabric is greatly important in determining the quality of a down jacket. In order to enrich the research on fabric handle, subjective and objective evaluations were made for down jacket fabrics that were less studied. The comprehensive handle evaluation system for fabrics and yarns (CHES-FY) can be used to evaluate the tactile handle of the fabric by accurately and efficiently measuring the basic mechanical properties of the fabric. Therefore, the CHES-FY was used to link the objective evaluation with the subjective handle, so as to effectively estimate the total handle value of the down jacket fabric. Fifty-two kinds of down jacket fabrics were objectively tested through measuring 17 extracted parameters, and principal component analysis was adopted to establish the five main handle characteristics of fullness, softness, stiffness, smoothness, looseness and tightness to characterize basic style of the down jacket fabrics. The results showed that the subjective and objective results were in good agreement. These characteristics can be used as indicators to characterize fabric performance, and the principal component expression to characterize fabric handle can better predict the handle characteristics of down jacket fabrics. This also proves that the CHES-FY can quickly and accurately obtain the fabric handle value, and can also evaluate the fabric quality level.

scholarly journals Dialogue Generation: From Imitation Learning to Inverse Reinforcement Learning

2019 ◽  
Vol 33 ◽  
pp. 6722-6729 ◽  
Author(s):  
Ziming Li ◽  
Julia Kiseleva ◽  
Maarten De Rijke
Keyword(s):  
Reinforcement Learning ◽  
State Of The Art ◽  
The State ◽  
Experimental Results ◽  
Imitation Learning ◽  
Local Optimum ◽  
Inverse Reinforcement Learning ◽  
High Quality ◽  
Overall Performance

The performance of adversarial dialogue generation models relies on the quality of the reward signal produced by the discriminator. The reward signal from a poor discriminator can be very sparse and unstable, which may lead the generator to fall into a local optimum or to produce nonsense replies. To alleviate the first problem, we first extend a recently proposed adversarial dialogue generation method to an adversarial imitation learning solution. Then, in the framework of adversarial inverse reinforcement learning, we propose a new reward model for dialogue generation that can provide a more accurate and precise reward signal for generator training. We evaluate the performance of the resulting model with automatic metrics and human evaluations in two annotation settings. Our experimental results demonstrate that our model can generate more high-quality responses and achieve higher overall performance than the state-of-the-art.

scholarly journals An Adaptive Image Inpainting Method Based on Continued Fractions Interpolation

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Lei He ◽  
Yan Xing ◽  
Kangxiong Xia ◽  
Jieqing Tan
Keyword(s):  
Continued Fractions ◽  
State Of The Art ◽  
Signal To Noise Ratio ◽  
Subjective Evaluation ◽  
Image Inpainting ◽  
Rational Interpolation ◽  
Objective Evaluation ◽  
Experimental Results ◽  
Signal To Noise

In view of the drawback of most image inpainting algorithms by which texture was not prominent, an adaptive inpainting algorithm based on continued fractions was proposed in this paper. In order to restore every damaged point, the information of known pixel points around the damaged point was used to interpolate the intensity of the damaged point. The proposed method included two steps; firstly, Thiele’s rational interpolation combined with the mask image was used to interpolate adaptively the intensities of damaged points to get an initial repaired image, and then Newton-Thiele’s rational interpolation was used to refine the initial repaired image to get a final result. In order to show the superiority of the proposed algorithm, plenty of experiments were tested on damaged images. Subjective evaluation and objective evaluation were used to evaluate the quality of repaired images, and the objective evaluation was comparison of Peak Signal to Noise Ratios (PSNRs). The experimental results showed that the proposed algorithm had better visual effect and higher Peak Signal to Noise Ratio compared with the state-of-the-art methods.

scholarly journals Mammogram image with Wiener filter and CLAHE

2017 ◽  
Vol 9 (2) ◽  
Author(s):  
Thekra Abbas ◽  
M .Nafea Jafaar
Keyword(s):  
Breast Cancer ◽  
Early Detection ◽  
Medical Diagnosis ◽  
Medical Image ◽  
Wiener Filter ◽  
Pectoral Muscle ◽  
Automated Detection ◽  
High Quality ◽  
Mammogram Image

      Many of the women in worlds die because of breast cancer and early detection will save the lives of many women. A mammogram is a special medical image in the breast. The mammogram image contains artifacts and wedge.     In this paper the mammogram image enhances by applied the Wiener filter to remove noise and apply Contrast Limited Adaptive Histogram Equitation (CLAHE) to improve a quality of mammogram image. Before applying them made number step to remove artifacts and wedge, background and pectoral muscle these know. The result indicted obtain mammogram image only breast profile, with a nice smooth, safe edge, and high quality.        These results prove that effective and convenient assistance for medical diagnosis. Hence, the proposed method definitely can be considered for automated detection of abnormality like benign, malignant and micro calcifications.

scholarly journals Semantic Specialization of Distributional Word Vector Spaces using Monolingual and Cross-Lingual Constraints

2017 ◽  
Vol 5 ◽  
pp. 309-324 ◽  
Author(s):  
Nikola Mrkšić ◽  
Ivan Vulić ◽  
Diarmuid Ó Séaghdha ◽  
Ira Leviant ◽  
Roi Reichart ◽  
...  
Keyword(s):  
State Of The Art ◽  
Vector Spaces ◽  
Lexical Resources ◽  
High Quality ◽  
Performance Improvements ◽  
State Tracking ◽  
Cross Lingual ◽  
Semantic Transfer ◽  
Multiple Languages

We present Attract-Repel, an algorithm for improving the semantic quality of word vectors by injecting constraints extracted from lexical resources. Attract-Repel facilitates the use of constraints from mono- and cross-lingual resources, yielding semantically specialized cross-lingual vector spaces. Our evaluation shows that the method can make use of existing cross-lingual lexicons to construct high-quality vector spaces for a plethora of different languages, facilitating semantic transfer from high- to lower-resource ones. The effectiveness of our approach is demonstrated with state-of-the-art results on semantic similarity datasets in six languages. We next show that Attract-Repel-specialized vectors boost performance in the downstream task of dialogue state tracking (DST) across multiple languages. Finally, we show that cross-lingual vector spaces produced by our algorithm facilitate the training of multilingual DST models, which brings further performance improvements.

Sign in / Sign up

Export Citation Format

Share Document