scholarly journals Simulation and fabrication of carbon nanotube–nanoparticle interconnected structures

2021 ◽  
Vol 12 (1) ◽  
pp. 451-459
Author(s):  
Xiwen Lu ◽  
Jinhang Liu ◽  
Ye Ding ◽  
Lijun Yang ◽  
Zhan Yang ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Integrated Circuits ◽  
Rapid Development ◽  
Three Dimensional ◽  
Silver Nanocluster ◽  
Nano Fabrication ◽  
3D Manipulation ◽  
Nano Structures ◽  
Silicon Based

Abstract. With the rapid development of nanotechnology, the size of a device reaches sub-nanometer scale. The larger resistivity of interconnect leads to serious overheating of integrated circuits. Silicon-based electronic devices have also reached the physical limits of their development. The use of carbon nanotubes instead of traditional wires has become a new solution for connecting nano-structures. Nanocluster particles serving as brazing material play an important role in stabilizing the connection of carbon nanotubes, which places higher demands for nanoscale manipulation techniques. In this paper, the dynamic processes under different operating scenarios were simulated and analyzed, including probe propulsion nanoparticle operation, probe pickup nanoparticle operation and probe pickup nanocluster particle operation. Then, the SEM (Scanning Electron Microscope) was used for nanoparticle manipulation experiments. The smallest unit of carbon nanotube wire was obtained by three-dimensional (3D) construction of a carbon nanotube–silver nanocluster particle (CN-AgNP), which verified the feasibility of 3D manipulation of carbon nanotube wire construction. The experiments on the construction of carbon nanotube–nanocluster particle structures in three-dimensional operation were completed, and the smallest unit of carbon nanotube wire was constructed. This nano-fabrication technology will provide an efficient and mature technical means in the field of nano-interconnection.

scholarly journals Two-photon polymerization nanolithography technology for fabrication of stimulus-responsive micro/nano-structures for biomedical applications

2020 ◽  
Vol 9 (1) ◽  
pp. 1118-1136
Author(s):  
Zhenjia Huang ◽  
Gary Chi-Pong Tsui ◽  
Yu Deng ◽  
Chak-Yin Tang
Keyword(s):  
Biomedical Applications ◽  
Three Dimensional ◽  
Water Soluble ◽  
Fabrication Technology ◽  
Nano Fabrication ◽  
Two Photon ◽  
Nano Structures ◽  
Wide Range ◽  
Stimulus Responsive ◽  
Two Photon Polymerization

AbstractMicro/nano-fabrication technology via two-photon polymerization (TPP) nanolithography is a powerful and useful manufacturing tool that is capable of generating two dimensional (2D) to three dimensional (3D) arbitrary micro/nano-structures of various materials with a high spatial resolution. This technology has received tremendous interest in cell and tissue engineering and medical microdevices because of its remarkable fabrication capability for sophisticated structures from macro- to nano-scale, which are difficult to be achieved by traditional methods with limited microarchitecture controllability. To fabricate precisely designed 3D micro/nano-structures for biomedical applications via TPP nanolithography, the use of photoinitiators (PIs) and photoresists needs to be considered comprehensively and systematically. In this review, widely used commercially available PIs are first discussed, followed by elucidating synthesis strategies of water-soluble initiators for biomedical applications. In addition to the conventional photoresists, the distinctive properties of customized stimulus-responsive photoresists are discussed. Finally, current limitations and challenges in the material and fabrication aspects and an outlook for future prospects of TPP for biomedical applications based on different biocompatible photosensitive composites are discussed comprehensively. In all, this review provides a basic understanding of TPP technology and important roles of PIs and photoresists for fabricating high-precision stimulus-responsive micro/nano-structures for a wide range of biomedical applications.

scholarly journals Growth and structural discrimination of cortical neurons on randomly oriented and vertically aligned dense carbon nanotube networks

2014 ◽  
Vol 5 ◽  
pp. 1575-1579 ◽  
Author(s):  
Christoph Nick ◽  
Sandeep Yadav ◽  
Ravi Joshi ◽  
Christiane Thielemann ◽  
Jörg J Schneider
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Cortical Neurons ◽  
Three Dimensional ◽  
Vertically Aligned Carbon Nanotubes ◽  
Aligned Carbon Nanotubes ◽  
Vertically Aligned ◽  
The Individual ◽  
Carbon Nanotube Networks ◽  
Communication Paths

The growth of cortical neurons on three dimensional structures of spatially defined (structured) randomly oriented, as well as on vertically aligned, carbon nanotubes (CNT) is studied. Cortical neurons are attracted towards both types of CNT nano-architectures. For both, neurons form clusters in close vicinity to the CNT structures whereupon the randomly oriented CNTs are more closely colonised than the CNT pillars. Neurons develop communication paths via neurites on both nanoarchitectures. These neuron cells attach preferentially on the CNT sidewalls of the vertically aligned CNT architecture instead than onto the tips of the individual CNT pillars.

The Effect of Nanotube Loading and Dispersion on the Three-Dimensional Nanostructure of Carbon Nanotube-Conducting Polymer Composite Films

2002 ◽  
Vol 739 ◽  
Author(s):  
Mark Hughes ◽  
George Z. Chen ◽  
Milo S. P. Shaffer ◽  
Derek J. Fray ◽  
Alan H. Windle
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Conducting Polymer ◽  
Polymer Composite ◽  
Electrochemical Polymerization ◽  
Composite Films ◽  
Three Dimensional ◽  
Ionic Diffusion ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

ABSTRACTNanoporous composite films of multi-walled carbon nanotubes (MWNTs) and either polypyrrole (PPy) or poly(3-methylthiophene) (P3MeT) were grown using an electrochemical polymerization technique in which the nanotubes and conducting polymer were deposited simultaneously. The concentration and dispersion of MWNTs in the polymerization electrolyte was found to have a significant effect on the thickness of polymer coated on each MWNT and hence the loading of MWNTs in the films produced. It has been shown that for an increasing concentration of MWNTs in the polymerization electrolyte, the thickness of polymer coated on each MWNT decreases. This relationship made it possible to minimize ionic diffusion distances within the nanoporous MWNT-PPy films produced, reducing their electrical and ionic resistance and increasing their capacitance relative to similarly prepared pure PPy films.

Review of Fabrication Methods of Nanotube / Nanowire Devices

2011 ◽  
Vol 411 ◽  
pp. 427-431 ◽  
Author(s):  
Miao Miao Tan ◽  
Zi Yi Zhang ◽  
Lin Hui Zhao ◽  
Jian Cheng Zhang
Keyword(s):  
Carbon Nanotube ◽  
High Performance ◽  
Chemical Properties ◽  
Research Field ◽  
Nano Materials ◽  
One Dimensional ◽  
Nano Fabrication ◽  
Nano Structures ◽  
Manufacturing Methods ◽  
And Chemical Properties

With the development of nano materials, a novel research field of NEMS forms by combining nano materials, nano-structures and nano fabrication with MEMS. Carbon nanotube (CNT) is a kind of one-dimensional nano structures which has unique mechanical, electrical and chemical properties. Using CNTs, new nano-devices with new principle or high performance would be developed. This paper reviews the assembly methods of one dimensional nanostructure and analyzes the characteristics of various methods, which provides reference for the device manufacturing methods using nanotubes/nanowires.

Highly sensitive compression sensors using three-dimensional printed polydimethylsiloxane/carbon nanotube nanocomposites

2019 ◽  
Vol 30 (8) ◽  
pp. 1216-1224 ◽  
Author(s):  
Mohammad Charara ◽  
Mohammad Abshirini ◽  
Mrinal C Saha ◽  
M Cengiz Altan ◽  
Yingtao Liu
Keyword(s):  
Carbon Nanotubes ◽  
Electron Microscope ◽  
Carbon Nanotube ◽  
Scanning Electron Microscope ◽  
Three Dimensional ◽  
Multi Walled Carbon Nanotube ◽  
Highly Sensitive ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This article presents three-dimensional printed and highly sensitive polydimethylsiloxane/multi-walled carbon nanotube sensors for compressive strain and pressure measurements. An electrically conductive polydimethylsiloxane/multi-walled carbon nanotube nanocomposite is developed to three-dimensional print compression sensors in a freestanding and layer-by-layer manner. The dispersion of multi-walled carbon nanotubes in polydimethylsiloxane allows the uncured nanocomposite to stand freely without any support throughout the printing process. The cross section of the compression sensors is examined under scanning electron microscope to identify the microstructure of nanocomposites, revealing good dispersion of multi-walled carbon nanotubes within the polydimethylsiloxane matrix. The sensor’s sensitivity was characterized under cyclic compression loading at various max strains, showing an especially high sensitivity at lower strains. The sensing capability of the three-dimensional printed nanocomposites shows minimum variation at various applied strain rates, indicating its versatile potential in a wide range of applications. Cyclic tests under compressive loading for over 8 h demonstrate that the long-term sensing performance is consistent. Finally, in situ micromechanical compressive tests under scanning electron microscope validated the sensor’s piezoresistive mechanism, showing the rearrangement, reorientation, and bending of the multi-walled carbon nanotubes under compressive loads, were the main reasons that lead to the piezoresistive sensing capabilities in the three-dimensional printed nanocomposites.

Porous and strong three-dimensional carbon nanotube coated ceramic scaffolds for tissue engineering

2015 ◽  
Vol 3 (42) ◽  
pp. 8337-8347 ◽  
Author(s):  
P. Newman ◽  
Z. Lu ◽  
S. I. Roohani-Esfahani ◽  
T. L. Church ◽  
M. Biro ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Tissue Engineering ◽  
Carbon Nanotube ◽  
Three Dimensional ◽  
Biological Properties ◽  
Porous Structures ◽  
High Quality

A method to coat high-quality uniform coatings of carbon nanotubes throughout 3D porous structures is developed. Testing of their physical and biological properties demonstrate their potential for application in tissue engineering.

scholarly journals Organic printed photonics: From microring lasers to integrated circuits

2015 ◽  
Vol 1 (8) ◽  
pp. e1500257 ◽  
Author(s):  
Chuang Zhang ◽  
Chang-Ling Zou ◽  
Yan Zhao ◽  
Chun-Hua Dong ◽  
Cong Wei ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Flexible Electronics ◽  
Integrated Circuit ◽  
Large Scale ◽  
Rapid Development ◽  
Light Signal ◽  
Photonic Integrated Circuit ◽  
Printing Technique ◽  
On Chip ◽  
Silicon Based

A photonic integrated circuit (PIC) is the optical analogy of an electronic loop in which photons are signal carriers with high transport speed and parallel processing capability. Besides the most frequently demonstrated silicon-based circuits, PICs require a variety of materials for light generation, processing, modulation, and detection. With their diversity and flexibility, organic molecular materials provide an alternative platform for photonics; however, the versatile fabrication of organic integrated circuits with the desired photonic performance remains a big challenge. The rapid development of flexible electronics has shown that a solution printing technique has considerable potential for the large-scale fabrication and integration of microsized/nanosized devices. We propose the idea of soft photonics and demonstrate the function-directed fabrication of high-quality organic photonic devices and circuits. We prepared size-tunable and reproducible polymer microring resonators on a wafer-scale transparent and flexible chip using a solution printing technique. The printed optical resonator showed a quality (Q) factor higher than 4 × 105, which is comparable to that of silicon-based resonators. The high material compatibility of this printed photonic chip enabled us to realize low-threshold microlasers by doping organic functional molecules into a typical photonic device. On an identical chip, this construction strategy allowed us to design a complex assembly of one-dimensional waveguide and resonator components for light signal filtering and optical storage toward the large-scale on-chip integration of microscopic photonic units. Thus, we have developed a scheme for soft photonic integration that may motivate further studies on organic photonic materials and devices.

SOME NOTES ON LOW-DIMENSIONAL ELASTIC THEORIES OF BIO- AND NANO-STRUCTURES

2010 ◽  
Vol 24 (23) ◽  
pp. 2403-2412 ◽  
Author(s):  
XIAO-HUA ZHOU
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Energy Density ◽  
Helix Angle ◽  
Dimensional Structure ◽  
One Dimensional ◽  
Nano Structures ◽  
Multi Walled Carbon Nanotubes ◽  
Low Dimensional ◽  
Walled Carbon Nanotubes

The shapes of DNA, carbon nanotube (CNT) and vesicle are determined by the minimum of their elastic energy. Two central results about the low-dimensional elastic structure are reported here. Firstly, if the energy density of a one-dimensional structure is only related to its curvature, we generally find that a helix solution with the helix angle θ = ±π/4 will have zero total energy. Secondly, with the fixed length and radii, the helical multi-walled carbon nanotubes (MWNTs) and DNA will have the lowest energy when the helix angle θ = ±π/3.

Speeding up carbon nanotube integrated circuits through three-dimensional architecture

Nano Research ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1810-1816 ◽  
Author(s):  
Yunong Xie ◽  
Zhiyong Zhang ◽  
Donglai Zhong ◽  
Lianmao Peng
Keyword(s):  
Carbon Nanotube ◽  
Integrated Circuits ◽  
Three Dimensional
Sign in / Sign up

Export Citation Format

Share Document