scholarly journals The seismogenic fault system of the 2017 <i>M</i><sub>w</sub> 7.3 Iran–Iraq earthquake: constraints from surface and subsurface data, cross-section balancing, and restoration

Solid Earth ◽  
2018 ◽  
Vol 9 (3) ◽  
pp. 821-831 ◽  
Author(s):  
Stefano Tavani ◽  
Mariano Parente ◽  
Francesco Puzone ◽  
Amerigo Corradetti ◽  
Gholamreza Gharabeigli ◽  
...  
Keyword(s):  
Cross Section ◽  
Sedimentary Cover ◽  
Active Faults ◽  
Fault System ◽  
Limited Information ◽  
Seismogenic Fault ◽  
Plate Convergence ◽  
Mountain Front ◽  
Seismogenic Structures ◽  
Seismic Reflection Profiles

Abstract. The 2017 Mw 7.3 Iran–Iraq earthquake occurred in a region where the pattern of major plate convergence is well constrained, but limited information is available on the seismogenic structures. Geological observations, interpretation of seismic reflection profiles, and well data are used in this paper to build a regional, balanced cross section that provides a comprehensive picture of the geometry and dimensional parameters of active faults in the hypocentral area. Our results indicate (i) the coexistence of thin- and thick-skinned thrusting, (ii) the reactivation of inherited structures, and (iii) the occurrence of weak units promoting heterogeneous deformation within the palaeo-Cenozoic sedimentary cover and partial decoupling from the underlying basement. According to our study, the main shock of the November 2017 seismic sequence is located within the basement, along the low-angle Mountain Front Fault. Aftershocks unzipped the up-dip portion of the same fault. This merges with a detachment level located at the base of the Paleozoic succession, to form a crustal-scale fault-bend anticline. Size and geometry of the Mountain Front Fault are consistent with a down-dip rupture width of 30 km, which is required for an Mw 7.3 earthquake.

scholarly journals The seismogenic fault system of the 2017 <i>M<sub>w</sub></i> 7.3 Iran-Iraq earthquake: constraints from surface and subsurface data, cross-section balancing and restoration

2018 ◽  
Author(s):  
Stefano Tavani ◽  
Mariano Parente ◽  
Francesco Puzone ◽  
Amerigo Corradetti ◽  
Gholamreza Gharabeigli ◽  
...  
Keyword(s):  
Cross Section ◽  
Sedimentary Cover ◽  
Active Faults ◽  
Fault System ◽  
Limited Information ◽  
Seismogenic Fault ◽  
Plate Convergence ◽  
Mountain Front ◽  
Seismogenic Structures ◽  
Seismic Reflection Profiles

Abstract. The 2017 Mw Iran-Iraq earthquake occurred in a region where the pattern of major plate convergence is well constrained, but limited information is available on the seismogenic structures. Geological observations, interpretation of seismic reflection profiles, and well data are used in this paper to build a regional balanced cross-section that provides a comprehensive picture of the geometry and dimensional parameters of active faults in the hypocentral area. Our results indicate: (i) coexistence of thin- and thick-skinned thrusting, (ii) reactivation of inherited structures, and (iii) occurrence of weak units promoting heterogeneous deformation within the Paleo-Cenozoic sedimentary cover and partial decoupling from the underlying basement. According to our study, the main shock of the November 2017 seismic sequence is located within the basement, along the low-angle Mountain Front Fault. Aftershocks unzipped the up-dip portion of the same fault. This merges with a detachment level located at the base of the Paleozoic succession, to form a crustal-scale fault-bend anticline. Size and geometry of the Mountain Front Fault are consistent with a down-dip rupture width of 30 km, which is required for an Mw 7.3 earthquake.

The seismogenic fault system of the Mw 6.4, November 2019 Albania earthquake: new insights into the structural architecture and active tectonic setting of the outer Albanides

2020 ◽  
pp. jgs2020-193
Author(s):  
Simone Teloni ◽  
Chiara Invernizzi ◽  
Stefano Mazzoli ◽  
Pietro Paolo Pierantoni ◽  
Vincenzo Spina
Keyword(s):  
Sedimentary Cover ◽  
Tectonic Setting ◽  
Fault System ◽  
Seismogenic Fault ◽  
Active Tectonic ◽  
Seismogenic Structures ◽  
Structural Architecture ◽  
Inversion Analysis ◽  
First Time

A seismic sequence that affected the Durrës region in late 2019 to early 2020 sheds new light into the structural architecture and active tectonic setting of the northern outer Albanides. Stress inversion analysis using the focal mechanisms confirms that the area is dominated by ENE trending, horizontal maximum compression. Seismogenic sources consist mainly of ENE dipping thrust faults roughly parallel to the coastline. Hypocentre distribution indicates that most of the earthquakes, including the Mw = 6.4 main shock, nucleated within the basement, while only some of the shallow aftershocks tend to cluster around the deeper portion of previously identified seismogenic structures within the sedimentary cover. Our results, unravelling for the first time the fundamental role of deeply rooted, crustal ramp-dominated thrusting in seismogenesis, imply a profound reconsideration of the seismotectonic setting of the region in view of a correct assessment of seismic hazard in this densely populated area of Albania.

scholarly journals Active faults and historical earthquakes in the Messina Straits area (Ionian Sea)

2012 ◽  
Vol 12 (7) ◽  
pp. 2311-2328 ◽  
Author(s):  
A. Polonia ◽  
L. Torelli ◽  
L. Gasperini ◽  
P. Mussoni
Keyword(s):  
Source Parameters ◽  
Active Faults ◽  
Historical Earthquakes ◽  
Fault System ◽  
Accretionary Wedge ◽  
Ionian Sea ◽  
Eurasian Plate ◽  
Plate Interface ◽  
Plate Convergence ◽  
Seismogenic Structures

Abstract. The Calabrian Arc (CA) subduction complex is located at the toe of the Eurasian Plate in the Ionian Sea, where sediments resting on the lower plate have been scraped off and piled up in the accretionary wedge due to the African/Eurasian plate convergence and back arc extension. The CA has been struck repeatedly by destructive historical earthquakes, but knowledge of active faults and source parameters is relatively poor, particularly for seismogenic structures extending offshore. We analysed the fine structure of major tectonic features likely to have been sources of past earthquakes: (i) the NNW–SSE trending Malta STEP (Slab Transfer Edge Propagator) fault system, representing a lateral tear of the subduction system; (ii) the out-of-sequence thrusts (splay faults) at the rear of the salt-bearing Messinian accretionary wedge; and (iii) the Messina Straits fault system, part of the wide deformation zone separating the western and eastern lobes of the accretionary wedge. Our findings have implications for seismic hazard in southern Italy, as we compile an inventory of first order active faults that may have produced past seismic events such as the 1908, 1693 and 1169 earthquakes. These faults are likely to be source regions for future large magnitude events as they are long, deep and bound sectors of the margin characterized by different deformation and coupling rates on the plate interface.

Role of structural inheritances in the development of the Mountain Front Flexure in the Lurestan region of the Zagros belt

2020 ◽  
Author(s):  
Stefano Tavani ◽  
Giovanni Camanni ◽  
Michele Nappo ◽  
Marco Snidero ◽  
Alessandra Ascione ◽  
...  
Keyword(s):  
Structural Control ◽  
Structural Features ◽  
Fault System ◽  
Minor Amount ◽  
Rift System ◽  
Balanced Cross Section ◽  
Mountain Front ◽  
Tectonic Style ◽  
A Minor ◽  
Seismic Reflection Profiles

&lt;p&gt;The Mountain Front Flexure is a major structure of the Zagros orogenic system, and is underlain by the deeply rooted and seismically active Mountain Front Fault system. These coupled structural features divide the belt from its foreland and their trace is sinuous, forming salients and recesses. The origin and tectonic significance of the Mountain Front Fault system and its sinuosity are still unclear, with most of hypotheses pointing to a strong structural control exerted by geological inheritances. In this work we combine interpretation of seismic reflection profiles, earthquake data, geomorphic analysis, and geological observations, to build a balanced cross section across the Mountain Front Flexure in the Lurestan region. Our data are suggestive of a hybrid tectonic style for the Lurestan region, characterised by a major and newly developed crustal ramp in the frontal portion of the belt (i.e the Mountain Front Fault) and by the reactivation of steeply dipping pre-existing basin-bounding faults, along with a minor amount of shortening, in the inner area. Specifically, the integration of our results with previous knowledge indicates that the Mountain Front Fault system developed in the necking domain of the Jurassic rift system, ahead of an array of inverted Jurassic extensional faults, in a structural fashion which resembles that of a crustal-scale footwall shortcut. Within this structural context, the sinusoidal shape of the Mountain Front Flexure in the Lurestan area arises from the re-use of the original segmentation of the inverted Jurassic rift system.&lt;/p&gt;

Bathymetry and uplift rate of the Gulf of Aqaba, Dead Sea Fault.

2021 ◽  
Author(s):  
Matthieu Ribot ◽  
Yann Klinger ◽  
Edwige Pons-Branchu ◽  
Marthe Lefevre ◽  
Sigurjón Jónsson
Keyword(s):  
High Resolution ◽  
Tectonic Evolution ◽  
Active Faults ◽  
Major Change ◽  
Dead Sea ◽  
Fault System ◽  
Arabian Plate ◽  
Gulf Of Aqaba ◽  
Uplift Rate ◽  
The Dead

&lt;p&gt;Initially described in the late 50&amp;#8217;s, the Dead Sea Fault system connects at its southern end to the Red Sea extensive system, through a succession of left-stepping faults. In this region, the left-lateral differential displacement of the Arabian plate with respect to the Sinai micro-plate along the Dead Sea fault results in the formation of a depression corresponding to the Gulf Aqaba. We acquired new bathymetric data in the areas of the Gulf of Aqaba and Strait of Tiran during two marine campaigns (June 2018, September 2019) in order to investigate the location of the active faults, which structure and control the morphology of the area. The high-resolution datasets (10-m posting) allow us to present a new fault map of the gulf and to discuss the seismic potential of the main active faults.&lt;/p&gt;&lt;p&gt;We also investigated the eastern margin of the Gulf of Aqaba and Tiran island to assess the vertical uplift rate. To do so, we computed high-resolution topographic data and we processed new series of U-Th analyses on corals from the uplifted marine terraces.&lt;/p&gt;&lt;p&gt;Combining our results with previous studies, we determined the local and the regional uplift in the area of the Gulf of Aqaba and Strait of Tiran.&lt;/p&gt;&lt;p&gt;Eventually, we discussed the tectonic evolution of the gulf since the last major change of the tectonic regime and we propose a revised tectonic evolution model of the area.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;

scholarly journals Exploring the shallow structure of the San Ramón thrust fault in Santiago, Chile (~33.5° S), using active seismic and electric methods

Solid Earth ◽  
2014 ◽  
Vol 5 (2) ◽  
pp. 837-849 ◽  
Author(s):  
D. Díaz ◽  
A. Maksymowicz ◽  
G. Vargas ◽  
E. Vera ◽  
E. Contreras-Reyes ◽  
...  
Keyword(s):  
Seismic Anisotropy ◽  
Average Length ◽  
Sedimentary Cover ◽  
Hanging Wall ◽  
Thrust Fault ◽  
Fault System ◽  
Surface Rupture ◽  
Thrust Tectonics ◽  
Rock Substratum ◽  
Fault Scarps

Abstract. The crustal-scale west-vergent San Ramón thrust fault system, which lies at the foot of the main Andean Cordillera in central Chile, is a geologically active structure with manifestations of late Quaternary complex surface rupture on fault segments along the eastern border of the city of Santiago. From the comparison of geophysical and geological observations, we assessed the subsurface structural pattern that affects the sedimentary cover and rock-substratum topography across fault scarps, which is critical for evaluating structural models and associated seismic hazard along the related faults. We performed seismic profiles with an average length of 250 m, using an array of 24 geophones (Geode), with 25 shots per profile, to produce high-resolution seismic tomography to aid in interpreting impedance changes associated with the deformed sedimentary cover. The recorded travel-time refractions and reflections were jointly inverted by using a 2-D tomographic approach, which resulted in variations across the scarp axis in both the velocities and the reflections that are interpreted as the sedimentary cover-rock substratum topography. Seismic anisotropy observed from tomographic profiles is consistent with sediment deformation triggered by west-vergent thrust tectonics along the fault. Electrical soundings crossing two fault scarps were used to construct subsurface resistivity tomographic profiles, which reveal systematic differences between lower resistivity values in the hanging wall with respect to the footwall of the geological structure, and clearly show well-defined east-dipping resistivity boundaries. These boundaries can be interpreted in terms of structurally driven fluid content change between the hanging wall and the footwall of the San Ramón fault. The overall results are consistent with a west-vergent thrust structure dipping ~55° E in the subsurface beneath the piedmont sediments, with local complexities likely associated with variations in fault surface rupture propagation, fault splays and fault segment transfer zones.

scholarly journals Empirical Relationship for Assessing the Near-Field Horizontal Coseismic Displacement Using GPS Seismology Data

2021 ◽  
Vol 60 (1) ◽  
pp. 31-50
Author(s):  
Ryad Darawcheh ◽  
Riad Al Ghazzi ◽  
Mohamad Khir Abdul-wahed
Keyword(s):  
Near Field ◽  
Empirical Relationship ◽  
Active Faults ◽  
Historical Earthquakes ◽  
Dead Sea ◽  
Fault System ◽  
Coseismic Displacement ◽  
Data Set ◽  
Earthquake Parameters ◽  
Gps Station

In this research, a data set of horizontal GPS coseismic displacement in the near-field has been assembled around the world in order to investigate a potential relationship between the displacement and the earthquake parameters. Regression analyses have been applied to the data of 120 interplate earthquakes having the magnitude (Mw 4.8-9.2). An empirical relationship for prediction near-field horizontal GPS coseismic displacement as a function of moment magnitude and the distance between hypocenter and near field GPS station has been established using the multi regression analysis. The obtained relationship allows assessing the coseismic displacements associated with some large historical earthquakes occurred along the Dead Sea fault system. Such a fair relationship could be useful for assessing the coseismic displacement at any point around the active faults.

scholarly journals Μορφοτεκτονική μελέτη της ευρύτερης περιοχής Θεσ/νίκης για τη χαρτογράφηση νεοτεκτονικών ρηγμάτων.

2005 ◽  
Vol 38 ◽  
pp. 30 ◽  
Author(s):  
Α. ΖΕΡΒΟΠΟΥΛΟΥ ◽  
Σ. ΠΑΥΛΙΔΗΣ
Keyword(s):  
Drainage Basin ◽  
Digital Elevation Models ◽  
Active Faults ◽  
Gradient Index ◽  
Stream Length ◽  
Drainage Patterns ◽  
Digital Elevation ◽  
Mountain Front ◽  
Morphotectonic Indices

At this paper studied the neotectonic active faults of the broader area of Thessaloniki with morphotectonic criteria. We have studied three main faults of Anthemounta, Asvestophori and Pylaia - Panorama with the contribution of cartography, digital elevation models, drainage patterns, and the morphotectonic indices like drainage basin asymmetry, mountain front sinuosity, knick points and stream length-gradient index. Those faults show elements of activity.

The role of structural inheritance on Africa-Eurasia plate boundary evolution and neotectonics in the central Mediterranean sea

2021 ◽  
Author(s):  
Alina Polonia ◽  
Andrea Artoni ◽  
Graziella Barberi ◽  
Andrea Billi ◽  
Luca Gasperini ◽  
...  
Keyword(s):  
Mediterranean Sea ◽  
Plate Boundary ◽  
Geophysical Data ◽  
Fault System ◽  
Central Mediterranean ◽  
Plate Convergence ◽  
Structural Inheritance ◽  
Central Mediterranean Sea ◽  
Sicily Channel ◽  
Subduction System

&lt;p&gt;Africa-Eurasia plate convergence and the retreat of the subducting slab led to the consumption of the Tethys ocean lithosphere, which has now mostly disappeared below or accreted/exhumed within the Alps/Apennines. Slab tearing plays a major role in plate boundary evolution, asthenospheric upwelling, dynamic topography and magmatism. However, the role played by structural inheritance on the Africa plate is not well constrained. Based on seismological, geodetic and marine geophysical data, we analyse the pattern of crustal deformation in the Calabrian Arc and Sicily Channel, two key regions to unravel the complex Africa/Eurasia plate interaction in the central Mediterranean Sea.&lt;/p&gt;&lt;p&gt;The Calabrian Arc subduction-rollback system accommodates Africa/Eurasia plate convergence along thrust faults developing both in the frontal and inner domains of the accretionary wedge. However, the most intriguing and tectonically active features are represented by arc-orthogonal faults deforming the subduction system along a complex strike-slip/transtensional pattern that may have been the source of major earthquakes in the Calabrian Arc. Deformation along the lithospheric transtensional faults is punctuated by buried sub-circular magnetized bodies aligned with Mt. Etna, that were interpreted as serpentinite/mud diapirs intruding the subduction system from the lower plate mantle. These faults are part of the overall dextral shear deformation, resulting from differences in Africa-Eurasia motion between the western and eastern sectors of the Tyrrhenian margin of northern Sicily, and accommodating diverging motions in the adjacent compartments of the Calabrian Arc. To the West, the Sicily Channel is part of the Pelagian block and experienced a lithospheric-scale continental rifting starting from the late Miocene with the development of NW-SE-trending tectonic depressions, bordered by crustal normal faults with variable throws. Our geophysical data, however, show that the most active tectonic feature in the area is a N-S trending and ~220-km-long lithospheric fault system characterized by volcanism, high heat flow and seismic activity. The NW-SE elongated rifting pattern, considered the first order structure in this region, appears currently inactive and sealed by undeformed Pleistocene deposits suggesting a recent change in structural development.&lt;/p&gt;&lt;p&gt;Seismological data show that the lithospheric boundaries present in the Calabrian Arc and Sicily Channel correlate well with spatial changes in the depth distribution of earthquakes and separate regions with different Moho depths and thickness of the seismogenic layer. We propose that these boundaries may represent long-lived inherited Mesozoic discontinuities controlling plate boundary evolution and neotectonics.&lt;/p&gt;

Magnitude, timing, and rate of slip along the Atacama fault system, northern Chile: Implications for Early Cretaceous slip partitioning and plate convergence

2021 ◽  
pp. jgs2020-142
Author(s):  
N.M. Seymour ◽  
J.S. Singleton ◽  
R. Gomila ◽  
S.P. Mavor ◽  
G. Heuser ◽  
...  
Keyword(s):  
Convergence Rates ◽  
Slip Rate ◽  
Structural Data ◽  
Fault System ◽  
Content Type ◽  
Plate Convergence ◽  
Oblique Convergence ◽  
Slip History ◽  
Supplementary Material ◽  
Atacama Fault System

Displacement estimates along the Atacama fault system (AFS), a crustal-scale sinistral structure that accommodated oblique convergence in the Mesozoic Coastal Cordillera arc, vary widely due to a lack of piercing points. We mapped the distribution of plutons and mylonitic deformation along the northern ∼70 km of the El Salado segment and use U-Pb geochronology to establish the slip history of the AFS. Along the eastern branch, mylonitic fabrics associated with the synkinematic ∼134–132 Ma Cerro del Pingo Complex are separated by 34–38 km, and mylonites associated with a synkinematic ∼120–119 Ma tonalite are separated by 20.5–25 km. We interpret leucocratic intrusions to be separated across the western branch by ∼16–20 km, giving a total slip magnitude of ∼54 ± 6 km across the El Salado segment. Kinematic indicators consistently record sinistral shear and zircon (U-Th)/He data suggest dip-slip motion was insignificant. Displacement occurred between ∼133–110 Ma at a slip rate of ∼2.1–2.6 km/Myr. This slip rate is low compared to modern intra-arc strike-slip faults, suggesting (1) the majority of lateral slip was accommodated along the slab interface or distributed through the forearc or (2) plate convergence rates/obliquity were significantly lower than previously modeled.Supplementary material including full U-Pb, (U-Th)/He, petrographic, and structural data with locations is available at https://doi.org/10.6084/m9.figshare.c.5262177.

Sign in / Sign up

Export Citation Format

Share Document