scholarly journals A Variant of a Regenerative Hydrogen Storage and Production System for Power Installations

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Pavel Kudryavtsev
Keyword(s):  
Internal Combustion Engines ◽  
Hydrogen Generation ◽  
Combustion Engine ◽  
Storage System ◽  
Metal Hydrides ◽  
Internal Combustion ◽  
Hydrogen Release ◽  
Hydrogen Generator ◽  
Car Exhaust ◽  
Power Installations

The aim of this work is to obtain cheap and environmentally friendly fuels for automobile transport, as well as reducing emissions of harmful substances into the atmosphere with car exhaust. The problem can be solved by creating a system for producing technical hydrogen and its use in internal combustion engines and other power units. This article proposed using active metals, their alloys, or metal hydrides interaction with water to generate hydrogen. This proposal is based on an analysis of existing and possible methods of storing and transporting hydrogen. For the practical realization of this approach has been proposed the construction of the device of hydrogen storing and generating for powerful engines and vehicles. The functioning of the recommended equipment is to hydrogen generation by reacting the active metals, or their alloys, or metal hydrides with water in a polar aprotic organic solvent. From these products, it has been proposed to form the cartridges with internal through holes—cartridges placed in the hydrogen generator. The polar solvent pumped through the hydrogen generator in which it reacts with the material of the cartridge. At this solvent is added the water in a controlled manner and used for the reaction with the cartridge material for hydrogen release. Hydrogen, after separation of the liquid phase, flows into the fuel system of the internal combustion engine. The spent solvent is pumped into the solvent intake and storage system and, subsequently, the solvent is replaced when the cartridge is replaced. The system can operate in a closed-loop in the case organization of gathering and recycling of waste materials for reuse.

scholarly journals Small Cogeneration Unit with Heat and Electricity Storage

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2102
Author(s):  
Josef Stetina ◽  
Michael Bohm ◽  
Michal Brezina
Keyword(s):  
Internal Combustion Engine ◽  
Cooling System ◽  
Combustion Engine ◽  
Catalytic Converter ◽  
Storage System ◽  
Internal Combustion ◽  
Energy Storage System ◽  
Balance Model ◽  
Exhaust Pipe ◽  
Water Storage Tank

A micro cogeneration unit based on a three-cylinder internal combustion engine, Skoda MPI 1.0 L compressed natural gas (CNG), with an output of 25 kW at 3000 RPM is proposed in this paper. It is a relatively simple engine, which is already adopted by the manufacturer to operate on CNG. The engine life and design correspond to the original purpose of use in the vehicle. A detailed dynamic model was created in the GT-SUITE environment and implemented into an energy balance model that includes its internal combustion engine, heat exchangers, generator, battery storage, and water storage tank. The 1D internal combustion engine model provides us with information on engine start-up time, actual effective power, friction power, and the amount of heat going to the cooling system and exhaust pipe. The catalytic converter was removed from the exhaust pipe, and the engine was always operating at full load; thus, engine power control is not considered. An energy storage system for an island operation of the entire power unit for a large, detached house was designed to withstand accumulated energy for a few days in the case of a breakout. To reach a low initial system cost, the possible implementation of worn-out battery packs toward emission reduction in terms of the second life of the battery is proposed. The energy and emission balance are carried out, and the service life of the engine is also discussed.

scholarly journals Laminar Burning Velocity of Biogas-Containing Mixtures. A Literature Review

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 996
Author(s):  
Venera Giurcan ◽  
Codina Movileanu ◽  
Adina Magdalena Musuc ◽  
Maria Mitu
Keyword(s):  
Gas Turbines ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Engine ◽  
Burning Velocity ◽  
Internal Combustion ◽  
Electricity Production ◽  
Engine Fuel ◽  
Laminar Burning Velocity ◽  
Waste Products

Currently, the use of fossil fuels is very high and existing nature reserves are rapidly depleted. Therefore, researchers are turning their attention to find renewable fuels that have a low impact on the environment, to replace these fossil fuels. Biogas is a low-cost alternative, sustainable, renewable fuel existing worldwide. It can be produced by decomposition of vegetation or waste products of human and animal biological activity. This process is performed by microorganisms (such as methanogens and sulfate-reducing bacteria) by anaerobic digestion. Biogas can serve as a basis for heat and electricity production used for domestic heating and cooking. It can be also used to feed internal combustion engines, gas turbines, fuel cells, or cogeneration systems. In this paper, a comprehensive literature study regarding the laminar burning velocity of biogas-containing mixtures is presented. This study aims to characterize the use of biogas as IC (internal combustion) engine fuel, and to develop efficient safety recommendations and to predict and reduce the risk of fires and accidental explosions caused by biogas.

scholarly journals APPLICATION OF A HOLISTIC APPROACH OF HYDROGEN INTERNAL COMBUSTION ENGINE (HICE) BUSSES

2021 ◽  
Vol 1 ◽  
pp. 477-486
Author(s):  
Vahid Douzloo Salehi
Keyword(s):  
Fuel Cell ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Holistic Approach ◽  
Internal Combustion ◽  
Transport Sector ◽  
Driving Mode ◽  
Cell Technology ◽  
Fuel Cell Technology ◽  
Hydrogen Supply

AbstractHydrogen is a promising fuel to fulfil climate goals and future legislation requirements due to its carbon-free property. Especially hydrogen fueled buses and heavy-duty vehicles (HDVs) strongly move into the foreground. In contrast to the hydrogen-based fuel cell technology, which is already in commercial use, vehicles with hydrogen internal combustion engines (H2-ICE) are also a currently pursued field of research, representing a potentially holistic carbon-free drive train. Real applications of H2-ICE vehicles are currently not known but can be expected, since their suitability is put to test in a few insolated projects at this time. This paper provides a literature survey to reflect the current state of H2-ICEs focused on city buses. An extended view to HDVs and fuel cell technology allows to recognize trends in hydrogen transport sector, to identify further research potential and to derive useful conclusion. In addition, within this paper we apply green MAGIC as a holistic approach and discuss Well-to-Tank green hydrogen supply in relation to a H2-ICE city bus. Building on that, we introduce the upcoming Hydrogen-bus project, where tests of H2-ICE buses in real driving mode are foreseen to investigate Tank-to-Wheel.

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

Computationally Efficient Simulation of Multi-Component Fuel Combustion Using a Sparse Analytical Jacobian Chemistry Solver and High-Dimensional Clustering

2013 ◽  
Author(s):  
Federico Perini ◽  
Anand Krishnasamy ◽  
Youngchul Ra ◽  
Rolf D. Reitz
Keyword(s):  
Reaction Mechanism ◽  
Chemical Kinetics ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Engine Performance ◽  
Internal Combustion ◽  
Point Of View ◽  
High Dimensional ◽  
Computational Point ◽  
Fuel Surrogates

The need for more efficient and environmentally sustainable internal combustion engines is driving research towards the need to consider more realistic models for both fuel physics and chemistry. As far as compression ignition engines are concerned, phenomenological or lumped fuel models are unreliable to capture spray and combustion strategies outside of their validation domains — typically, high-pressure injection and high-temperature combustion. Furthermore, the development of variable-reactivity combustion strategies also creates the need to model comprehensively different hydrocarbon families even in single fuel surrogates. From the computational point of view, challenges to achieving practical simulation times arise from the dimensions of the reaction mechanism, that can be of hundreds species even if hydrocarbon families are lumped into representative compounds, and thus modeled with non-elementary, skeletal reaction pathways. In this case, it is also impossible to pursue further mechanism reductions to lower dimensions. CPU times for integrating chemical kinetics in internal combustion engine simulations ultimately scale with the number of cells in the grid, and with the cube number of species in the reaction mechanism. In the present work, two approaches to reduce the demands of engine simulations with detailed chemistry are presented. The first one addresses the demands due to the solution of the chemistry ODE system, and features the adoption of SpeedCHEM, a newly developed chemistry package that solves chemical kinetics using sparse analytical Jacobians. The second one aims to reduce the number of chemistry calculations by binning the CFD cells of the engine grid into a subset of clusters, where chemistry is solved and then mapped back to the original domain. In particular, a high-dimensional representation of the chemical state space is adopted for keeping track of the different fuel components, and a newly developed bounding-box-constrained k-means algorithm is used to subdivide the cells into reactively homogeneous clusters. The approaches have been tested on a number of simulations featuring multi-component diesel fuel surrogates, and different engine grids. The results show that significant CPU time reductions, of about one order of magnitude, can be achieved without loss of accuracy in both engine performance and emissions predictions, prompting for their applicability to more refined or full-sized engine grids.

scholarly journals Investigation of the Heat Transfer Process in Internal Combustion Engine Cylinders

2020 ◽  
pp. 266-274
Author(s):  
Volodumur Suvolapov ◽  
◽  
Andriy Novitskiy ◽  
Vasul Khmelevski ◽  
Oleksandr Bustruy ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Contact Layer ◽  
Internal Combustion ◽  
Temperature Fields ◽  
Cylinder Surface ◽  
Stationary Mode ◽  
Cylinder Wall ◽  
Engine Cylinder

The article analyzes scientific publications and literary studies of heat transfer processes in cylinders of internal combustion engines. The research of temperature fields in engines during their operation at different modes with the use of a software package and calculation module is presented. The results of modeling and thermo-metering in homogeneous and laminated engine cylinder liners are analyzed. Graphic dependencies and temperature distribution by cylinder wall thickness at maximum and minimum temperature on cylinder surface are given. On the basis of researches it is established that at laminating and pressing of inserts temperature fields in the engine cylinder change, temperature on an internal surface of the cylinder increases at laminating on 6,5 °С, and at pressing - on 4,5 °С. This is explained by the fact that the contact layer during plastification is in the zone of non-stationary mode, and when pressing the contact layer is in the zone of stationary mode and thus increases the thickness of the cylinder by 2 millimeters. It is established that the difference of minimum and maximum temperatures on the inner surface of the cylinder practically remains the same as that of a homogeneous cylinder. Thus, modeling becomes the most effective scientific tool in the development and implementation of long-term evaluation of options for improving ICE.

scholarly journals Individual drive of internal combustion engine lubrication system based on switched reluctance motor

2020 ◽  
Vol 6 (2) ◽  
pp. 146-151
Author(s):  
Ihor Holovach ◽  
◽  
Lidiia Kasha ◽  
Ivan Hudzii
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Switched Reluctance Motor ◽  
Internal Combustion ◽  
Hydrodynamic Resistance ◽  
Lubrication System ◽  
Resistance Characteristic ◽  
Switched Reluctance ◽  
Reluctance Motor

The article analyses the modern lubrication systems for internal combustion engines. Systems with mechanical drive components that contain mechanical and electronic components have been found to have a number of disadvantages. In particular, when the internal combustion engine is started cold, when the viscosity of the oil is high, the hydrodynamic resistance characteristic rises sharply, which leads to high pressure at low speeds and the drive requires low pump speeds. Again, the increase in oil temperature causes a decrease in viscosity, the hydrodynamic resistance characteristic becomes flatter. This, in turn, reduces the pressure in the lubrication system and requires an increase in pump speed in order to keep the pressure constant. Based on the analysis, the requirements for lubrication systems are formulated and a separate lubrication system with forced oil supply is proposed in this paper. For the drive of pump lubrication system of the internal combustion engine, a switched reluctance motor is proposed and calculated. Such motor by its qualities is one of the most useful in this type of systems.

scholarly journals Assessment of thermodynamic cycle of internal combustion engine in terms of rightsizing

2019 ◽  
Vol 178 (3) ◽  
pp. 182-186
Author(s):  
Zbigniew SROKA ◽  
Maciej DWORACZYŃSKI
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Thermodynamic Cycle ◽  
Internal Combustion ◽  
Research Problem ◽  
Combustion Engines ◽  
Operating Characteristics ◽  
Swept Volume

The modification of the downsizing trend of internal combustion engines towards rightsizing is a new challenge for constructors. The change in the displacement volume of internal combustion engines accompanying the rightsizing idea may in fact mean a reduction or increase of the defining swept volume change factors and thus may affect the change in the operating characteristics as a result of changes in combustion process parameters - a research problem described in this publication. Incidents of changes in the displacement volume were considered along with the change of the compression space and at the change of the geometric degree of compression. The new form of the mathematical dependence describing the efficiency of the thermodynamic cycle makes it possible to evaluate the opera-tion indicators of the internal combustion engine along with the implementation of the rightsizing idea. The work demonstrated the in-variance of cycle efficiency with different forms of rightsizing.

scholarly journals Real Time Neutron Radiography Applications in Gas Turbine and Internal Combustion Engine Technology

1988 ◽  
Author(s):  
John T. Lindsay ◽  
C. W. Kauffman
Keyword(s):  
Real Time ◽  
Gas Turbine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Neutron Radiography ◽  
Three Dimensional ◽  
Basic Research ◽  
Internal Combustion ◽  
Turbine Engines ◽  
Gas Turbine Engines

Real Time Neutron Radiography (RTNR) is rapidly becoming a valuable tool for nondestructive testing and basic research with a wide variety of applications in the field of engine technology. The Phoenix Memorial Laboratory (PML) at the University of Michigan has developed a RTNR facility and has been using this facility to study several phenomena that have direct application to internal combustion and gas turbine engines. These phenomena include; 1) the study of coking and debris deposition in several gas turbine nozzles (including the JT8D), 2) the study of lubrication problems in operating standard internal combustion engines and in operating automatic transmissions (1, 2, 3), 3) the location of lubrication blockage and subsequent imaging of the improvement obtained from design changes, 4) the imaging of sprays inside metallic structures in both a two-dimensional, standard radiographic manner (4, 5) and in a computer reconstructed, three-dimensional, tomographic manner (2, 3), and 5) the imaging of the fuel spray from an injector in a single cylinder diesel engine while the engine is operating. This paper will show via slides and real time video, the above applications of RTNR as well as other applications not directly related to gas turbine engines.

Sign in / Sign up

Export Citation Format

Share Document