The effect of HDD pivot bearing assembly process on actuator arm modal frequency

2013 ◽  
Vol 40 (1) ◽  
pp. 29-34 ◽  
Author(s):  
Khosak Achawakorn ◽  
Thira Jearsiripongkul ◽  
Krairoek Fanchaeng
2011 ◽  
Vol 42 (10) ◽  
pp. 28-34
Author(s):  
Yuanxin Luo ◽  
Yongqing Wang ◽  
Xingchun Yan

The hub-bearing assembly is one of the fundamental components of modern vehicles. A bad hub-bearing can cause phantom noises or ghost vibrations at sporadic points during the drive. In this paper, effects on the clearance of the bearing are investigated by both the analytical method and the Finite Element Method (FEM). It is found that the assembly process, the initial setting clearance, the rotating speed, the thermo-expansion contribute to the clearance of automotive hub bearing. The fundamental study is the basis for analyzing the dynamic performance and noise of the bearing. Also, it can be extended to optimize the assembly process.


2011 ◽  
Vol 422 ◽  
pp. 131-135
Author(s):  
Jian Hua Zhang ◽  
Da Wei Fu ◽  
Xiao Jun Zhang

Assembly is an important process in the manufacturing processes. For the badly self-adaptive and flexibility, the stuck phenomena and inefficient are often occurred with certain the assembly precision and fit, by using the robot for assembly. In this paper, the kinematics analysis of the three joints robot, which is used to assembly the bearing, is analyzed; the end joint movement angle formula is calculated. The force sensor is used during the assembly process. To ensure the assembly process, a new way is proposed to find the compliant assembly centre, which help the assembly robot to complicate the assemble process. The bearing assembly process is introduced by the three joint robots system.


Author(s):  
Shiwei Wang ◽  
Anton Chavez ◽  
Simil Thomas ◽  
Hong Li ◽  
Nathan C. Flanders ◽  
...  

This work reports on the assembly of imine-linked macrocycles that serve as models of two-dimensional covalent organic frameworks (2D COFs). Interlayer interactions play an important role in the formation of 2D COFs, yet the effect of monomer structure on COF formation, crystallinity, and susceptibility to exfoliation are not well understood. For example, monomers with both electron-rich and electron-poor π-electron systems have been proposed to strengthen interlayer inter-actions and improve crystallinity. Here we probe these effects by studying the stacking behavior of imine-linked macrocycles that represent discrete models of 2D COFs. <div><br></div><div>Specifically, macrocycles based on terephthaldehyde (PDA) or 2,5-dimethoxyterephthaldehyde (DMPDA) stack upon cooling molecularly dissolved solutions. Both macrocycles assemble cooperatively with similar ΔHe values of -97 kJ/mol and -101 kJ/mol, respectively, although the DMPDA macrocycle assembly process showed a more straightforward temperature dependence. Circular dichroism spectroscopy performed on macrocycles bearing chiral side chains revealed a helix reversion process for the PDA macrocycles that was not observed for the DMPDA macrocycles. <br></div><div><br></div><div>Given the structural similarity of these monomers, these findings demonstrate that the stacking processes associated with nanotubes derived from these macrocycles, as well as for the corresponding COFs, are complex and susceptible to kinetic traps, casting doubt on the relevance of thermodynamic arguments for improving materials quality. <br></div>


2018 ◽  
Vol 11 (5) ◽  
Author(s):  
Sahil Savara ◽  
Ishbir Singh ◽  
Sachin Kalsi

Author(s):  
Ramesh Varma ◽  
Richard Brooks ◽  
Ronald Twist ◽  
James Arnold ◽  
Cleston Messick

Abstract In a prequalification effort to evaluate the assembly process for the industrial grade high pin count devices for use in a high reliability application, one device exhibited characteristics that, without corrective actions and/or extensive screening, may lead to intermittent system failures and unacceptable reliability. Five methodologies confirmed this conclusion: (1) low post-decapsulation wire pull results; (2) bond shape analysis showed process variation; (3) Failure Analysis (FA) using state of the art equipment determined the root causes and verified the low wire pull results; (4) temperature cycling parts while monitoring, showed intermittent failures, and (5) parts tested from other vendors using the same techniques passed all limits.


Author(s):  
Krishna Sailaja A ◽  
Amareshwar P

In order to see the functionality and toxicity of nanoparticles in various food and drug applications, it is important to establish procedures to prepare nanoparticles of a controlled size. Desolvation is a thermodynamically driven self-assembly process for polymeric materials. In this study, we prepared BSA nanoparticles using the desolvation technique using acetone as desolvating agent. Acetone was added intermittently into 1% BSA solution at different pH under stirring at 700 rpm. Amount of acetone added, intermittent timeline of acetone addition, and pH of solution were considered as process parameters to be optimized. The effect of the process parameters on size of the nanoparticles was studied. The results indicated that the size control of BSA nanoparticles was achieved by adding acetone intermittently. The standard deviation of average size of BSA nanoparticles at each preparation condition was minimized by adding acetone intermittently. The intermittent addition in polymeric aqueous solution can be useful for size control for food or drug applications.  


1993 ◽  
Author(s):  
David L. Malmquist ◽  
Paul Downs ◽  
Dan Sfiligoi ◽  
Wayne Stevenson ◽  
Gerry Flynn ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4239
Author(s):  
Pezhman Mohammadi ◽  
Fabian Zemke ◽  
Wolfgang Wagermaier ◽  
Markus B. Linder

Macromolecular assembly into complex morphologies and architectural shapes is an area of fundamental research and technological innovation. In this work, we investigate the self-assembly process of recombinantly produced protein inspired by spider silk (spidroin). To elucidate the first steps of the assembly process, we examined highly concentrated and viscous pendant droplets of this protein in air. We show how the protein self-assembles and crystallizes at the water–air interface into a relatively thick and highly elastic skin. Using time-resolved in situ synchrotron X-ray scattering measurements during the drying process, we showed that the skin evolved to contain a high β-sheet amount over time. We also found that β-sheet formation strongly depended on protein concentration and relative humidity. These had a strong influence not only on the amount, but also on the ordering of these structures during the β-sheet formation process. We also showed how the skin around pendant droplets can serve as a reservoir for attaining liquid–liquid phase separation and coacervation from the dilute protein solution. Essentially, this study shows a new assembly route which could be optimized for the synthesis of new materials from a dilute protein solution and determine the properties of the final products.


Sign in / Sign up

Export Citation Format

Share Document