scholarly journals Thermal Stability of Mg/TeO2 Priming Compositions

2021 ◽  
pp. X
Author(s):  
Xiang-run ZHAO ◽  
Nan YAN ◽  
Wu-si DAI ◽  
Yao-kun YE ◽  
Shi-xin JIN ◽  
...  
Keyword(s):  
Room Temperature ◽  
Thermal Environment ◽  
Ignition Time ◽  
Digital Cameras ◽  
Extreme Temperatures ◽  
Scanning Calorimetry ◽  
Output Pressure ◽  
Temperature Conditions ◽  
Thermal Stability Of ◽  
Function Time

The insensitive ignitors with magnesium/tellurium dioxide (Mg/TeO2) priming composition installed on the spacecraft will experience a harsh thermal environment. Therefore, it is necessary to verify their availability at extreme temperatures. Differential Scanning Calorimetry and Thermogravimetric Analysis (DSC-TGA) were used to analyze the reaction process of the Mg/TeO2 priming composition. The morphology change of the Mg/TeO2 priming composition after -70 ℃6d, room temperature, 165 ℃6d were analyze by digital cameras, scanning electron microscope (SEM), as well as the output pressure, ignition time, function time and firing sensitivity of the Mg/TeO2 priming composition under three temperature conditions were tested. The results show that in a temperature range of -70 ℃ ~ 165 ℃, the temperature conditions have an effect on the output pressure less than 5%, the influence of high temperature conditions on ignition/ function time and sensitivity is greater than low temperature. It can be used as a priming composition for insensitive ignitors at -70 ℃ ~ 165 ℃.

scholarly journals Thermal Stability Analysis of the Mg/TeO2 Ignition Composition after 180 °C Exposure

2020 ◽  
Vol 10 (22) ◽  
pp. 8122
Author(s):  
Xiang He ◽  
Yaokun Ye ◽  
Nan Yan ◽  
Feng Ding ◽  
Chaozhen Li ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Thermal Environment ◽  
Exothermic Reaction ◽  
Pressure Rise ◽  
Optical Microscope ◽  
Main Reaction ◽  
Scanning Calorimetry ◽  
Change Analysis ◽  
Good Thermal Stability ◽  
Thermal Stability Of

In order to satisfy the performance requirements of the pyrotechnic ignition composition of a space mission under an extreme thermal environment, it is necessary to analyze and verify the thermal stability of magnesium/tellurium dioxide (Mg/TeO2) ignition composition at a temperature of 180 °C. The thermal stability of the ignition composition of Mg/TeO2 and its components after exposure to 180 °C for 2–10 days was studied by means of apparent morphology analysis, differential scanning calorimetry (DSC), X-ray diffraction (XRD), content change analysis, and the P-t curve test. The results showed that after exposure to 180 °C for 2–10 days, no obvious changes, such as ruptures, expansion, or shrinkage, were found by optical microscope, and no changes in morphology and surface details were found by scanning electron microscope (SEM). XRD showed that no other new substance was found in the mixture except magnesium hydroxide (Mg (OH)2). DSC showed that the main reaction peak temperature of the ignition composition of Mg/TeO2 was after 500 °C and that no endothermic/exothermic reaction occurred before 380 °C. The exothermic pre-reaction took place at 381 °C to 470 °C, the weight loss ratio was within 0.71%, the content of the magnesium component varied from 0.49% to 0.90%, the peak pressure attenuation of the ignition composition of 360-mesh Mg/TeO2 was 8.07%, and the pressure rise time was basically unchanged. The results showed that the ignition composition of Mg/TeO2 had good thermal stability after exposure to 180 °C temperatures.

scholarly journals Electrochemical and thermal stability of Chocolate Brown HT food additive

2019 ◽  
Vol 25 (1) ◽  
pp. 89-96
Author(s):  
Bogdan Tutunaru ◽  
Adriana Samide ◽  
Cristian Neamtu ◽  
Ioana Prunaru
Keyword(s):  
Food Industry ◽  
Room Temperature ◽  
Great Accuracy ◽  
Food Additive ◽  
Constant Current ◽  
Electrochemical Degradation ◽  
Scanning Calorimetry ◽  
Fluoride Ions ◽  
Thermal Analyzer ◽  
Thermal Stability Of

Chocolate Brown HT (E155) food additive characterization, based on simultaneous thermogravimetry and differential scanning calorimetry (TG/DSC), was studied using a diamond thermal analyzer, Perkin Elmer. Studies on melting and pyrolysis behavior of E155 color food additive observed by TG/ /DTG indicate changes in its composition recorded through several steps of decreasing the mass of the sample. After heating the sample within the temperature range from the room temperature to 1000?C, a residue of 33% was observed at the end of the experiment. Thermal decomposition of E155 examined by DSC in an inert nitrogenous atmosphere was also used for predicting its stability. This analysis predicts with great accuracy the use of Chocolate Brown HT additive in the food industry or household use. Brown HT (E155) food additive characterization based on electrochemical methods was studied in the presence of different halide anions. By corroborating the data obtained by cyclic voltammetry and constant current electrolysis it has been observed that the electrochemical degradation efficiency of the BHT molecule has the highest value in the presence of bromide anions, and in the presence of fluoride ions has a minimum value.

scholarly journals Mechanical Amorphization and Recrystallization of Mn-Co(Fe)-Ge(Si) Compositions

Metals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 534 ◽  
Author(s):  
Antonio Vidal-Crespo ◽  
Jhon J. Ipus ◽  
Javier S. Blázquez ◽  
Alejandro Conde
Keyword(s):  
Room Temperature ◽  
Crystal Size ◽  
Milling Time ◽  
Phase Evolution ◽  
Intermetallic Phases ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Bcc Phase ◽  
Thermal Stability Of

Mechanical alloying using a planetary ball mill allowed us to obtain two homogeneous systems formed by units with nanometer size and MnCo0.8Fe0.2Ge1−xSix stoichiometry (x = 0 and 0.5). The phase evolution of the systems with the milling time was analyzed using X-ray diffraction. Thermal stability of the final products was studied using differential scanning calorimetry. Room temperature 57Fe Mössbauer spectroscopy was used to follow the changes in the Fe environments. A paramagnetic Co-based amorphous phase developed in both alloys as milling progressed. However, while the presence of Si stabilized the Mn-type phase, mechanical recrystallization was observed in a Si-free composition leading to the formation of a MnCo(Fe)Ge intermetallic (Pnma space group) with a crystal size of 7 ± 1 nm. Mössbauer results indicate that Fe atoms migrate from the initial bcc phase to the amorphous and intermetallic phases.

Thermal Stability of N-Heterocycle-Stabilized Iodanes – A Systematic Investigation

2019 ◽  
Author(s):  
Andreas Boelke ◽  
Yulia A. Vlasenko ◽  
Mekhman S. Yusubov ◽  
Boris Nachtsheim ◽  
Pavel Postnikov
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Systematic Investigation ◽  
Scanning Calorimetry ◽  
Thermal Stability Of

<p>The thermal stability of pseudocyclic and cyclic <i>N</i>-heterocycle-stabilized (hydroxy)aryl- and mesityl(aryl)-l<sup>3</sup>-iodanes (NHIs) through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) is investigated. NHIs bearing <i>N</i>-heterocycles with a high N/C-ratio such as triazoles show among the lowest descomposition temperatures and the highest decomposition energies. A comparison of NHIs with known (pseudo)cyclic benziodoxolones is made and we further correlated their thermal stability with reactivity in a model oxygenation. </p>

Mechanical and thermal characterization of grafted PP-NCC nanocomposites

2019 ◽  
pp. 089270571987822
Author(s):  
Saud Aldajah ◽  
Mohammad Y Al-Haik ◽  
Waseem Siddique ◽  
Mohammad M Kabir ◽  
Yousef Haik
Keyword(s):  
Thermal Properties ◽  
Interfacial Adhesion ◽  
Thermal Characterization ◽  
Mechanical And Thermal Properties ◽  
Screw Extruder ◽  
Scanning Calorimetry ◽  
Three Point Bending ◽  
Twin Screw ◽  
Thermal Stability Of

This study reveals the enhancement of mechanical and thermal properties of maleic anhydride-grafted polypropylene (PP- g-MA) with the addition of nanocrystalline cellulose (NCC). A nanocomposite was manufactured by blending various percentages of PP, MA, and NCC nanoparticles by means of a twin-screw extruder. The influence of varying the percentages of NCC on the mechanical and thermal behavior of the nanocomposite was studied by performing three-point bending, nanoindentation, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy tests. The novelty of this study stems on the NCC nanoparticles and their ability to enhance the mechanical and thermal properties of PP. Three-point bending and nanoindentation tests revealed improvement in the mechanical properties in terms of strength, modulus, and hardness of the PP- g-MA nanocomposites as the addition of NCC increased. SEM showed homogeneity between the mixtures which proved the presence of interfacial adhesion between the PP- g-MA incorporated with NCC nanoparticles that was confirmed by the FTIR results. DSC and TGA measurements showed that the thermal stability of the nanocomposites was not compromised due to the addition of the coupling agent and reinforced nanoparticles.

Star-shaped arylacetylene resins derived from silicon

2020 ◽  
Vol 40 (8) ◽  
pp. 676-684
Author(s):  
Niping Dai ◽  
Junkun Tang ◽  
Manping Ma ◽  
Xiaotian Liu ◽  
Chuan Li ◽  
...  
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Mechanical Test ◽  
Flexural Modulus ◽  
Mechanical Analysis ◽  
Reinforced Composites ◽  
Scanning Calorimetry ◽  
Chemical Structures ◽  
Structures And Properties ◽  
High Performance Resin

AbstractStar-shaped arylacetylene resins, tris(3-ethynyl-phenylethynyl)methylsilane, tris(3-ethynyl-phenylethynyl) phenylsilane, and tris (3-ethynyl-phenylethynyl) silane (TEPHS), were synthesized through Grignard reaction between 1,3-diethynylbenzene and three types of trichlorinated silanes. The chemical structures and properties of the resins were characterized by means of nuclear magnetic resonance, fourier-transform infrared spectroscopy, Haake torque rheomoter, differential scanning calorimetry, dynamic mechanical analysis, mechanical test, and thermogravimetric analysis. The results show that the melt viscosity at 120 °C is lower than 150 mPa⋅s, and the processing windows are as wide as 60 °C for the resins. The resins cure at the temperature as low as 150 °C. The good processabilities make the resins to be suitable for resin transfer molding. The cured resins exhibit high flexural modulus and excellent heat-resistance. The flexural modulus of the cured TEPHS at room temperature arrives at as high as 10.9 GPa. Its temperature of 5% weight loss (Td5) is up to 697 °C in nitrogen. The resins show the potential for application in fiber-reinforced composites as high-performance resin in the field of aviation and aerospace.

scholarly journals The effect of polyhedral oligomeric silsesquioxanes (POSSs) incorporation in ethylene-propylene-diene-terpolymer (EPDM): a thermal study

2021 ◽  
Author(s):  
Ignazio Blanco ◽  
Traian Zaharescu
Keyword(s):  
Room Temperature ◽  
Thermal Characterization ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Dsc Analysis ◽  
Γ Irradiation ◽  
Scanning Calorimetry ◽  
Ethylene Propylene ◽  
Oligomeric Silsesquioxane ◽  
Ethylene Propylene Diene Terpolymer ◽  
Dynamic Heating

AbstractA series of ethylene-propylene-diene-terpolymer (EPDM)/polyhedral oligomeric silsesquioxane (POSS) composites at different percentage of POSS were prepared and subjected to γ-irradiation. Both irradiated and non-irradiated EPDM and composites were investigated by the means of thermal analysis to verify if the presence of POSS molecules is able to reduce the oxidation level of free radicals generated during the degradation and to evaluate the effects of the irradiation. EPDM composites at 1, 3 and 5 mass% of POSS were thus degraded in a thermogravimetric (TG) balance in dynamic heating conditions (25–700 °C), in both inert and oxidative atmosphere by flowing nitrogen and air respectively. Thermal characterization was then completed by carrying out Differential Scanning Calorimetry (DSC) analysis from sub-ambient to better highlight the melting of the polymer and polymer composites occurring just above the room temperature. FTIR spectroscopy was also performed for the prepared samples to check the presence of the molecular filler in the composites and for the TG’s residue at 700 °C, in order to evaluate its nature. DSC and TGA parameters were detected and discussed to have information about the effect of the degradation’s environment, the effect of irradiation on polymer stabilization and the effect of POSS content in the polymer matrix.

An efficient construction of CN bond under catalyst‐free and room temperature conditions

2021 ◽  
Vol 58 (5) ◽  
pp. 1179-1191
Author(s):  
Jinpeng Zhang ◽  
Jing Liu ◽  
Lei Dai ◽  
Yuqian Ge ◽  
Linlin Xu ◽  
...  
Keyword(s):  
Room Temperature ◽  
Catalyst Free ◽  
Temperature Conditions ◽  
Efficient Construction

Synthesis and properties of phthalonitrile-based resins containing spirocycle acetal

2020 ◽  
pp. 095400832097759
Author(s):  
Ke Li ◽  
Hua Yin ◽  
Kun Yang ◽  
Pei Dai ◽  
Ling Han ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Chemical Structure ◽  
Room Temperature ◽  
Laser Desorption Ionization ◽  
Scanning Calorimetry ◽  
Rheological Analysis ◽  
Ionization Time ◽  
Dynamic Mechanical ◽  
Nmr Spectrometry ◽  
Current Context

Designing novel low-melting, high-rigidity phthalonitrile resin is of great significance in the current context of development. In this study, rigid spirocycle acetal structure was introduced into phthalonitrile to reduce the melting point and maintain their thermal stability. The chemical structure of resins was confirmed by nuclear magnetic resonance (NMR) spectrometry, matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry and Fourier-transform infrared (FTIR) spectroscopy. The curing behaviors were studied by differential scanning calorimetry (DSC). Thermal stability and mechanical properties of the cured resins were investigated by dynamic mechanical thermal analysis (DMTA) and thermogravimetric analysis (TGA). The processability was studied by rheological analysis. The results indicated the three monomers had a low melting temperature, wide processing windows and low viscosities. These polymers did not exhibit Tg from room temperature to 400°C, exhibited superb dynamic mechanical property and thermal stability.

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

Sign in / Sign up

Export Citation Format

Share Document