Isolation of A Molybdenum-reducing Bacillus sp. strain Zeid 15 and Modeling of its Growth on Amides

More and more people are looking at bioremediation as a cheaper option to physhiochemical techniques for cleaning up pollution from farming, mines, and other chemical industries. Toxic effects of molybdenum on spermatogenesis harm not only humans but also livestock and aquatic life. As a result, efforts are being made to remove it from the ecosystem. A microorganism that can convert soluble molybdenum into colloidal molybdenum blue has been discovered. Phosphate concentrations were optimum between 2.5 and 5, molybdate concentrations between 15 and 20, pH between 6, and temperature between 25 and 34 degrees Celsius for the bacteria to thrive. Absorption spectrum of Mo-blue shows a peak at 865 nm and a shoulder at 700 nm, which indicates that it is in fact reduced phosphomolybdate. Copper, mercury, silver, copper, and chromium are all hazardous heavy metals that hinder the synthesis of Mo-blue. Bacillus sp. strain Zeid 15 is the most likely candidate for the bacterium's identity. As part of our screening, we look for the bacterium's capacity to employ different nitriles and amides as potential electron donors for molybdenum reduction or as substrates for growth. A microplate format was used for the screening. The bacterium was able to use the amides acrylamide and propionamide as sources of electron donor for reduction. Mo-blue production was best supported by acrylamide between 750 and 1250 mg/L, and propionamide between 750 and 1000 mg/L. In addition, these amides including acetamide could support the growth of the bacterium. The modified Gompertz model was utilized to model the growth of this bacterium on amides. The model’s growth parameters obtained were lag periods of 1.372, 1.562 and 1.639 d and maximum specific growth rates of 1.38, 0.95 and 0.734 d-1, for acrylamide, acetamide and propionamide, respectively. The capacity of this bacterium to decontaminate simultaneously amides and molybdenum is a novel characteristic that will be very beneficial in bioremediation.

Isolation and Characterization of a PEG-degrading and Mo-reducing Escherichia coli strain Amr-13 in soils from Egypt

Molybdenum is a pollutant that shows toxicity to spermatogenesis while polyethylene glycols (PEG) are used predominantly in detergents. The pollution of molybdenum and PEGs are reported worldwide. We have isolated ten molybdenum-reducing bacterial isolates from soil that can reduce molybdenum (sodium molybdate) into the colloidal molybdenum blue (Mo-blue). The screening of these isolates for PEG-degrading ability showed that one isolate was capable to utilize PEG 200, 300 and 600 for optimal conditions were pHs between 5.5 and 8.0, temperatures between 30 and 37 oC, phosphate at 5 mM, molybdate between 10 and 30 mM, and glucose as the electron donor. Biochemical analysis of the bacterium identifies it as Escherichia coli strain Amr-13. Growth was best supported by all PEGs at concentrations of between 600 and 1,000 mg/L. A complete degradation for PEG 200 and PEG 300 at 1,000 mg/L was observed on day four and five, respectively, while nearly 90% of PEG 600 was degraded on day six. The growth of this bacterium on these PEGs was modelled using the modified Gompertz model, and produced growth parameters values, which were maximum specific growth rates of 1.51, 1.45 and 1.18 d-1 and lag periods of 0.53, 0.87 and 1.02 day for PEG 200, PEG 300 and PEG 600, respectively. PEG 200 was the most preferred substrate for this bacterium, while PEG 600 was the least preferred.

Molybdenum Blue Production from Serratia sp. strain DRY5: Secondary Modeling

In this work, kinetic growth models such as Luong, Yano, Teissier-Edward, Aiba, Haldane, Monod, Han and Levenspiel were used to model molybdenum blue production from Serratia sp. strain DRY5. Based on statistical analyses such as root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), and accuracy factor (AF), the Monod model was chosen as the best. The calculated values for the monod constants qmax (the maximum specific substrate degradation rate (h−1), and Ks (concentration of substrate at the half maximal degradation rate (mg/L)) were found to be 3.86 (95% confidence interval of 2.29 to 5.43), and 43.41 (95% confidence interval of 12.36 to 74.46) respectively. The novel constants discovered during the modelling exercise could be used in further secondary modelling.

Sequential Injection System for Analysis of Degree Brix, Orthophosphate and pH in Raw Sugarcane Juice Applicable to Sugar Industry

This work presents, for the first time, a new sequential injection analysis (SIA) method to simultaneously analyze degree Brix, orthophosphate and pH in raw cane juice. These key parameters relate to price of harvested sugarcane and quality of cane juice for sugar production. The SIA system employed two detectors: the first detector is a diode-array spectrophotometer, equipped with a regular flow cell, for measurements of degree Brix and orthophosphate. Quantitative of degree Brix (°Bx; ca. % (w/w) sucrose) was based on manipulation of the schlieren effect at the interface between plugs of sample and water. Orthophosphate analysis was carried out based on the molybdenum blue method with significant reduction in consumption of the reagents. Compensation of the schlieren effect from sucrose for determination of orthophosphate was achieved by using a dual-wavelength spectrometric detection. Second detector is a pH-sensing device, called ion-selective field-effect transistors (ISFET). The ISFET is based on the current through the ISFET arising according to the H+ concentration in solution. Our developed SIA system provides linear calibration graphs fitting for purpose in analysis of sugarcane juice (pH: 0–14, °Bx: 1.0–7.0 and P2O5: 20–200 mg L−1). Simultaneous analysis of sugarcane juice for pH, °Bx and P2O5 is carried out within 5 min (12 sample per h). Precision of SIA system is acceptable (RSD < 3%). Our SIA system gave quantitative results insignificantly different, as compared with conventional methods for analysis of pH, °Bx and P2O5 in sugarcane juice.

Band-selective Holstein polaron in Luttinger liquid material A0.3MoO3 (A = K, Rb)

Abstract(Quasi-)one-dimensional systems exhibit various fascinating properties such as Luttinger liquid behavior, Peierls transition, novel topological phases, and the accommodation of unique quasiparticles (e.g., spinon, holon, and soliton, etc.). Here we study molybdenum blue bronze A0.3MoO3 (A = K, Rb), a canonical quasi-one-dimensional charge-density-wave material, using laser-based angle-resolved photoemission spectroscopy. Our experiment suggests that the normal phase of A0.3MoO3 is a prototypical Luttinger liquid, from which the charge-density-wave emerges with decreasing temperature. Prominently, we observe strong renormalizations of band dispersions, which are recognized as the spectral function of Holstein polaron derived from band-selective electron-phonon coupling in the system. We argue that the strong electron-phonon coupling plays an important role in electronic properties and the charge-density-wave transition in blue bronzes. Our results not only reconcile the long-standing heavy debates on the electronic properties of blue bronzes but also provide a rare platform to study interesting excitations in Luttinger liquid materials.

Quantification of Silicon in Rice Based on an Electrochemical Sensor via an Amplified Electrocatalytic Strategy

Silicon plays a very important role in the growth of rice. The study of the relationship between rice and silicon has become a hot area in the last decade. Currently, the silica-molybdenum blue spectrophotometric method is mostly used for the determination of silicon content in rice. However, the results of this method vary greatly due to the different choices of reducing agents, measurement wavelengths and color development times. In this work, we present for the first time an electrochemical sensor for the detection of silicon content in rice. This electrochemical analysis technique not only provides an alternative detection strategy, but also, due to the rapid detection by electrochemical methods and the miniaturization of the instrument, it is suitable for field testing. Methodological construction using electrochemical techniques is a key objective. The silicon in rice was extracted by HF and becomes silica after pH adjustment. The silica was then immobilized onto the glassy carbon surface. These silica nanoparticles provided additional specific surface area for adsorption of sodium borohydride and Ag ions, which in turn formed Ag nanoparticles to fabricate an electrochemical sensor. The proposed electrochemical sensor can be used for indirect measurements of 10–400 mg/L of SiO2, and thus, the method can measure 4.67–186.8 mg/g of silicon. The electrochemical sensor can be used to be comparable with the conventional silicon-molybdenum blue spectrophotometric method. The RSD of the current value was only 3.4% for five sensors. In practical use, 200 samples of glume, leaf, leaf sheath and culm were tested. The results showed that glume had the highest silicon content and culm had the lowest silicon content. The linear correlation coefficients for glume, leaf, leaf sheath and culm were 0.9841, 0.9907, 0.9894 and 0.993, respectively.

Formation of Molybdenum Blue Nanoparticles in the Organic Reducing Area

Molybdenum blue dispersions were synthesized by reducing an acidic molybdate solution with glucose, hydroquinone and ascorbic acid. The influence of the H/Mo molar ratio on the rate of formation of molybdenum particles was established. For each reducing agent, were determined the rate constant and the order of the particle formation and were established the conditions for the formation of aggregative stable dispersion with the maximum concentration of particles. The dispersed phase is represented by toroidal molybdenum oxide nanoclusters, which was confirmed by the results of UV/Vis, FTIR, XPS spectroscopy and DLS.

Fast and sensitive method for phosphorus determination in dairy products

The spectrophotometric molybdenum blue method for phosphorus determination was adapted to a multiwell plate format. The method was sensitive and allowed for the simultaneous determination of phosphorus in many samples. It was cheap and eco-friendly due to application of small volumes of reagents and, therefore, it meets the requirements for “green” or sustainable chemistry. The method’s limit of detection (LOD) is 0.37 μg/mL and its limit of quantification (LOQ) is 1.13 μg/mL. Its linearity is up to 30 μg of phosphorus/mL. The method was applied for the determination of phosphorus in 65 dairy products (yogurts, yogurt drinks, buttermilks, kefirs and homogenized cheeses) of strawberry, peach, forest fruits, vanilla and other flavours. The phosphorus content was 143–226 mg/100 g in flavoured yogurts, 78–204 mg/100 g in yogurt drinks, 89–218 mg/100 g in kefirs, around 195 mg/100 g in buttermilks, and 165–277 mg/100 g in homogenized cheeses. The presented method can be used in the routine quantitative analysis of the total phosphorus content in dairy products.

Microbiological Reduction of Molybdenum to Molybdenum Blue as a Sustainable Remediation Tool for Molybdenum: A Comprehensive Review

Molybdenum (Mo) microbial bioreduction is a phenomenon that is beginning to be recognized globally as a tool for the remediation of molybdenum toxicity. Molybdenum toxicity continues to be demonstrated in many animal models of spermatogenesis and oogenesis, particularly those of ruminants. The phenomenon has been reported for more than 100 years without a clear understanding of the reduction mechanism, indicating a clear gap in the scientific knowledge. This knowledge is not just fundamentally important—it is specifically important in applications for bioremediation measures and the sustainable recovery of metal from industrial or mine effluent. To date, about 52 molybdenum-reducing bacteria have been isolated globally. An increasing number of reports have also been published regarding the assimilation of other xenobiotics. This phenomenon is likely to be observed in current and future events in which the remediation of xenobiotics requires microorganisms capable of degrading or transforming multi-xenobiotics. This review aimed to comprehensively catalogue all of the characterizations of molybdenum-reducing microorganisms to date and identify future opportunities and improvements.