Thermo-Magneto-Electric Transport through a Torsion Dislocation in a Type I Weyl Semimetal

Herein, we study electronic and thermoelectric transport in a type I Weyl semimetal nanojunction, with a torsional dislocation defect, in the presence of an external magnetic field parallel to the dislocation axis. The defect is modeled in a cylindrical geometry, as a combination of a gauge field accounting for torsional strain and a delta-potential barrier for the lattice mismatch effect. In the Landauer formalism, we find that due to the combination of strain and magnetic field, the electric current exhibits chiral valley-polarization, and the conductance displays the signature of Landau levels. We also compute the thermal transport coefficients, where a high thermopower and a large figure of merit are predicted for the junction.

Supercoiling and looping promote DNA base accessibility and coordination among distant sites

DNA in cells is supercoiled and constrained into loops and this supercoiling and looping influence every aspect of DNA activity. We show here that negative supercoiling transmits mechanical stress along the DNA backbone to disrupt base pairing at specific distant sites. Cooperativity among distant sites localizes certain sequences to superhelical apices. Base pair disruption allows sharp bending at superhelical apices, which facilitates DNA writhing to relieve torsional strain. The coupling of these processes may help prevent extensive denaturation associated with genomic instability. Our results provide a model for how DNA can form short loops, which are required for many essential processes, and how cells may use DNA loops to position nicks to facilitate repair. Furthermore, our results reveal a complex interplay between site-specific disruptions to base pairing and the 3-D conformation of DNA, which influences how genomes are stored, replicated, transcribed, repaired, and many other aspects of DNA activity.

Generation of increased mechanical properties of Cantor high­entropy alloy

The article considers a brief review of the last years of Russian and foreign research on the possibilities of improving mechanical properties of the Cantor quinary high­entropy alloy (HEA) with different phase composition in wide temperature range. The alloy, one of the frst created equimolar HEAs with FCC structure, needs mechanical properties improvement in accordance with possible felds of application in spite of its high impact toughness and increased creep resistance. It has been noted that bimodal distribution of the grains by sizes under severe plastic torsional strain at high pressure of 7.8 GPa of cast alloy and subsequent short­time annealing at 873 and 973 K can change strength and plastic properties. Nanodimensional scale of the grains surrounded by amorphous envelope has been obtained for HEA produced by the method of magnetron sputtering and subsequent annealing at 573 K. In such a two­phase alloy nanohardness amounted to 9.44 GPa and elasticity modulus – to 183 GPa. Using plasticity effect induced by phase transformation in (CrMnFeCoNi)50Fe50 alloy obtained by the method of laser additive technology the ultimate strength of 415 – 470 MPa has been reached at high level of plasticity up to 77 %. It has been ensured by FCC → BCC diffusionless transformation. It is shown that difference in mechanisms of plastic strain of cast alloy at 77 K and 293 K (dislocation glide and twinning) determines a combination of increased “strength­plasticity” properties. Samples for generation of twins prestrained at 77 K exhibit increased strength and plasticity under subsequent loading at 293 K in comparison with the unstrained ones. For HEA obtained by laser additive technology this way of increasing properties is also true. The way of improving mechanical properties at the expense of electron beam processing is noted. The attention is paid to the necessity of taking into account the role of entropy, crystal lattice distortions, short­range order, weak diffusion and “cocktail” effect in the analysis of mechanical properties.

Bending-torsional elasticity and energetics of the plus-end microtubule tip

Microtubules (MTs), mesoscopic cellular filaments, grow primarily by the addition of GTP-bound tubulin dimers at their dynamic flaring plus-end tips. They operate as chemomechanical energy transducers with stochastic transitions to an astounding shortening motion upon hydrolyzing GTP to GDP. Time-resolved dynamics of the MT tip - a key determinant of this behavior - as a function of nucleotide state, internal lattice strain, and stabilizing lateral interactions have not been fully understood. Here, we use atomistic simulations to study the spontaneous relaxation of complete GTP-MT and GDP-MT tip models from unfavorable straight to relaxed splayed conformations and to comprehensively characterize the elasticity of MT tips. Our simulations reveal the dominance of viscoelastic dynamics of MT protofilaments during the relaxation process, driven by the stored bending-torsional strain and counterbalanced by the inter-protofilament interactions. We show that the post-hydrolysis MT tip is exposed to higher activation energy barriers for straight lattice formation, which translates into its inability to elongate. Our study provides an 'information ratchet' mechanism for the elastic energy conversion and release by MT tips and offers new insights into the mechanoenzymatics of MTs.

Behavior of Inelastic and Plastic Strains in Coarse-Grained Ti49.3Ni50.7(at%) Alloy Deformed in B2 States

The regularities of the change in inelastic strain in coarse-grained samples of the Ti49.3Ni50.7 (at%) alloy are studied when the samples are given torsional strain in the state of the high-temperature B2 phase. During cooling and heating, the investigated samples underwent the B2–B19′ martensite transformation (MT); the temperature of the end of the reverse MT was Af = 273 K. It was found that at the temperature of isothermal cycles “loading-unloading” Af + 8 K, when the specimen is assigned a strain of 4%, the effect of superelasticity is observed. With an increase in the torsional strain, the shape memory effect is clearly manifested. It is assumed that the stabilization of the B19′ phase in unloaded samples is due to the appearance of dislocations during deformation due to high internal stresses at the interphase boundaries of the B2 phase and the martensite phase during MT. The appearance of dislocations during the loading of samples near the temperatures of forward and reverse MT can also be facilitated by the “softening” of the elastic moduli of the alloy in this temperature range. At a test temperature above Af + 26 K, the superelasticity effect dominates in the studied samples.

Light-driven continuous rotating Möbius strip actuators

Twisted toroidal ribbons such as the one-sided Möbius strip have inspired scientists, engineers and artists for many centuries. A physical Möbius strip exhibits interesting mechanical properties deriving from a tendency to redistribute the torsional strain away from the twist region. This leads to the interesting possibility of building topological actuators with continuous deformations. Here we report on a series of corresponding bi-layered stripe actuators using a photothermally responsive liquid crystal elastomer as the fundamental polymeric material. Employing a special procedure, even Möbius strips with an odd number of twists can be fabricated exhibiting a seamless homeotropic and homogeneous morphology. Imposing a suitable contraction gradient under near-infrared light irradiation, these ribbons can realize continuous anticlockwise/clockwise in-situ rotation. Our work could pave the way for developing actuators and shape morphing materials that need not rely on switching between distinct states.

Experimental Testing on an Air-Cooled Condenser Motor, Gearbox and Fan

The majority of South Africa’s electricity is generated from coal-fired power stations. After expansion through the turbine stage the heated steam is condensed by air-cooled condensors (ACCs). In water scarce areas air-cooled condensers are used to reject heat by means of convection through an array of fans that force air over the heated steam tubes positioned in a A-frame structure above the fan. The ACC system consists of an induction motor, two-stage gear reducer and an axial fan. For this research, the rotational velocity of the gearbox’s output shaft is measured as well as the bending and torsional strain experienced during different stages of operation. A proximity sensor and various sets of strain gauges are used to record the measurements respectively. Testing was conducted at three different sites that utilize different control methods for the induction motors. The purpose of testing at different sites was to evaluate the effectiveness of each start-up control system and its application inside an ACC. The results obtained in each of the three cases are quite clear that any motor controller is beneficial to the overall system simply due to the reduced inrush current and torque peaks.

Detect axial gauge fields with a calorimeter

Torsional strain in Weyl semimetals excites a unidirectional chiral density wave propagating in the direction of the torsional vector. This gapless excitation, named the chiral sound wave, is generated by a particular realization of the axial anomaly via the triple-axial (AAA) anomalous diagram. We show that the presence of the torsion-generated chiral sound leads to a linear behavior of the specific heat of a Weyl semimetal and to an enhancement of the thermal conductivty at experimentally accessible temperatures. We also demonstrate that such an elastic twist lowers the temperature of the sample, thus generating a new, anomalous type of elasto-calorific effect. Measurements of these thermodynamical effects will provide experimental verification of the exotic triple-axial anomaly as well as the reality of the elastic pseudomagnetic fields in Weyl semimetals.

A G-Quadruplex-Binding Small Molecule and the HDAC Inhibitor SAHA (Vorinostat) Act Synergistically in Gemcitabine-Sensitive and Resistant Pancreatic Cancer Cells

The stabilisation of G-quadruplexes (G4s) by small-molecule compounds is an effective approach for causing cell growth arrest, followed by cell death. Some of these compounds are currently being developed for the treatment of human cancers. We have previously developed a substituted naphthalene diimide G4-binding molecule (CM03) with selective potency for pancreatic cancer cells, including gemcitabine-resistant cells. We report here that CM03 and the histone deacetylase (HDAC) inhibitor SAHA (suberanilohydroxamic acid) have synergistic effects at concentrations close to and below their individual GI50 values, in both gemcitabine-sensitive and resistant pancreatic cancer cell lines. Immunoblot analysis showed elevated levels of γ-H2AX and cleaved PARP proteins upon drug combination treatment, indicating increased levels of DNA damage (double-strand break events: DSBs) and apoptosis induction, respectively. We propose that the mechanism of synergy involves SAHA relaxing condensed chromatin, resulting in higher levels of G4 formation. In turn, CM03 can stabilise a greater number of G4s, leading to the downregulation of more G4-containing genes as well as a higher incidence of DSBs due to torsional strain on DNA and chromatin structure.