Mechanical Study of Some Polystyrene composites modified with adding inorganic fillers

Polystyrene-Zinc oxide microcomposites have been prepared for Mechanical study. The Zinc oxide micro particles were added to polystyrene by different concentrations that are (3, 5, and 7) by weight percent of the pure polymeric matrix. Solution casting method is used for preparing such composites. Different Mechanical properties of (PS-ZnO) microcomposites have been measured. Stress strain Curve is investigated for both pure Polystyrene and its composites with zinc oxide. The results showed that the Tensile Strength varies with the increase of ZnO in a specific way. Elongation at break of (PS-ZnO) micro composites increase with increase the content of (ZnO). An explanation of such behavior in tensile strength as well as Elongation at break has been discussed.

High Impact Employee Stress Reduction and Wellness Promotion Delivered via Digital Mobile Technology in the Construction and Aviation Industries

To evaluate the impact of an on demand, digital mobile application deployed via smartphone on subjectively perceived and objectively measured stress levels of employee participants in a mobile digital stress reduction program within two corporate enterprises, as well as on self-reported wellness indicators.

Performance Evaluation of AquaCrop Model in Processing Tomato Biomass, Fruit Yield and Water Stress Indicator Modelling

A three-year long experiment was conducted on open-field tomato with different levels of water shortage stress. Three different water supply levels were set in 2017 and four levels for 2018 and 2019. Biomass and yield data were collected, along with leaf-temperature-based stress measurements on plants. These were used for calibration and validation of the AquaCrop model. The validation gave various results of biomass and yield simulation during the growing season. The largest errors in the prediction occurred in the middle of the growing seasons, but the simulation became more accurate at harvest in general. The prediction of final biomass and yields were good according to the model evaluation indicators. The relative root mean square error (nRMSE) was 12.1 and 13.6% for biomass and yield prediction, respectively. The modeling efficiency (EF) was 0.96 (biomass) and 0.99 (yield), and Willmott’s index of agreement (d) was 0.99 for both predicted parameters at harvest. The lowest nRMSE (4.17) was found in the simulation of final yields of 2018 (the calibration year). The best accuracy of the validation year was reached under mild stress treatment. No high correlation was found between the simulated and measured stress indicators. However, increasing and decreasing trends could be followed especially in the severely stressed treatments.

What Does Sleeping Brain Tell About Stress? A Pilot Functional Near-Infrared Spectroscopy Study Into Stress-Related Cortical Hemodynamic Features During Sleep

People with mental stress often experience disturbed sleep, suggesting stress-related abnormalities in brain activity during sleep. However, no study has looked at the physiological oscillations in brain hemodynamics during sleep in relation to stress. In this pilot study, we aimed to explore the relationships between bedtime stress and the hemodynamics in the prefrontal cortex during the first sleep cycle. We tracked the stress biomarkers, salivary cortisol, and secretory immunoglobulin A (sIgA) on a daily basis and utilized the days of lower levels of measured stress as natural controls to the days of higher levels of measured stress. Cortical hemodynamics was measured using a cutting-edge wearable functional near-infrared spectroscopy (fNIRS) system. Time-domain, frequency-domain features as well as nonlinear features were derived from the cleaned hemodynamic signals. We proposed an original ensemble algorithm to generate an average importance score for each feature based on the assessment of six statistical and machine learning techniques. With all channels counted in, the top five most referred feature types are Hurst exponent, mean, the ratio of the major/minor axis standard deviation of the Poincaré plot of the signal, statistical complexity, and crest factor. The left rostral prefrontal cortex (RLPFC) was the most relevant sub-region. Significantly strong correlations were found between the hemodynamic features derived at this sub-region and all three stress indicators. The dorsolateral prefrontal cortex (DLPFC) is also a relevant cortical area. The areas of mid-DLPFC and caudal-DLPFC both demonstrated significant and moderate association to all three stress indicators. No relevance was found in the ventrolateral prefrontal cortex. The preliminary results shed light on the possible role of the RLPCF, especially the left RLPCF, in processing stress during sleep. In addition, our findings echoed the previous stress studies conducted during wake time and provides supplementary evidence on the relevance of the dorsolateral prefrontal cortex in stress responses during sleep. This pilot study serves as a proof-of-concept for a new research paradigm to stress research and identified exciting opportunities for future studies.

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

A number of non-equimolar refractory high entropy alloys (RF HEAs) from the Al–Ti–Mo–Nb–V system are synthesized, with the selected compositions aimed to balance the conflicting requirements of the low-temperature ductility and high-temperature corrosion protection. Based on the thermodynamic modeling and experimental results, all the obtained alloys are characterized by the single-phase B2 structure with V acting as the main phase stabilizer. The microstructure and mechanical properties appear to be controlled mainly by the Al content, which is especially visible on the example of hardness, with a maximum value of 545 HV for Al20Ti5Mo25Nb25V25 composition. For the selected Al20Ti5Mo25Nb25V25 and Al10Ti30Mo20Nb20V20 alloys, the measured stress–strain curves indicate the highly coveted, ductile room temperature behavior, with the values of ultimate strain measured under compression mode being 9.17 and 9.00 pct, respectively, and compressive fracture strain of 13.38 and 13.25 pct, respectively. The obtained results suggest that it is possible to include Al as a vital component of refractory HEAs without compromising their low-temperature ductility. The next intended step will be the characterization of the high-temperature corrosion behavior in order to investigate the potential selective oxidation capabilities of such materials.

Nanometric flow and earthquake instability

Fault zones accommodate relative motion between tectonic blocks and control earthquake nucleation. Nanocrystalline fault rocks are ubiquitous in “principal slip zones” indicating that these materials are determining fault stability. However, the rheology of nanocrystalline fault rocks remains poorly constrained. Here, we show that such fault rocks are an order of magnitude weaker than their microcrystalline counterparts when deformed at identical experimental conditions. Weakening of the fault rocks is hence intrinsic, it occurs once nanocrystalline layers form. However, it is difficult to produce “rate weakening” behavior due to the low measured stress exponent, n, of 1.3 ± 0.4 and the low activation energy, Q, of 16,000 ± 14,000 J/mol implying that the material will be strongly “rate strengthening” with a weak temperature sensitivity. Failure of the fault zone nevertheless occurs once these weak layers coalesce in a kinematically favored network. This type of instability is distinct from the frictional instability used to describe crustal earthquakes.

COVID-19 Pandemic and Lockdown: Associations With Personality and Stress Components

The present study examines the role of personality traits, interpersonal relationships, and sociodemographic factors on perceived stress, related to COVID-19, and compliance with measures to mitigate its spread. Data were collected in the midst of the ‘first wave’ lockdown, with the survey completed in full by 963 participants. We measured stress, directly related to the pandemic, rather than general stress, and were able to distinguish between symptoms of emotional, behavioural, cognitive, physical stress, and alienation with high concordance. We included personality scoring with standardized T-scores, allowing for cross-study comparison, and a broader questionnaire on the participants’ support for COVID-19 mitigation measures. Results of the multiple regression models indicated that low emotional stability and introversion, and high conscientiousness, common conflicts with loved ones, and some demographics (female gender, middle age, chronic health problems) correspond to elevated stress. Conscientiousness was positively associated with total stress and some of its components, whereas opposite results were found for emotional stability. Extraversion was negatively correlated to total stress, its emotional and physical components, and alienation. Surprisingly, increased stress was not related to greater measure adherence. The present results shed light on how personality, interpersonal relationships, and sociodemographic factors influence people’s stress response during a pandemic.

Polymorphic variants in genes related to stress coping are associated with the awake bruxism

Background Chronic stress is one of the leading predisposing factors in bruxism aetiology, but the influence of genetic factors is also suggested. We aimed to study whether sequence variants in genes involved in stress regulation pathways: NTRK2 and BDNF, may be associated with awake bruxism susceptibility, clinical presentation, and patients’ perceived stress level. Methods The study group included 104 patients with probable awake bruxism and 191 population controls. Patients underwent dental examination concerning the symptoms of bruxism and psychological testing. Genotyping was performed using HRMA and sequencing. Statistical analyses were conducted, and P values below 0.05 were considered statistically significant. Results We observed a positive correlation of measured stress level and pathological teeth attrition in the anterior segment (r = 0.45, P < 0.001), enamel attritions (r = 0.44, P < 0.001), tongue impressions (r = 0.50, P < 0.001) and posterior teeth attrition (r = 0.27, P = 0.005). Moreover, the c.196A variant (p.66Met) of the BDNF gene and c.1397-31392G allele of the NTRK2 gene were present with elevated frequency, comparing to controls. Conclusions This study hence the thesis that perceived stress level is a substantial contributing factor to awake bruxism occurrence and its clinical manifestations. Moreover, sequence variants in genes related to stress coping may be correlated with awake bruxism’s susceptibility via elevated perceived stress level.

Sharing the Same Perspective. Mental Disorders and Central Serous Chorioretinopathy: A Systematic Review of Evidence from 2010 to 2020

Background: The relevance of the association between mental disorders and other conditions might have been underestimated due to its complexity. Central Serous Chorioretinopathy (CSC) is an ophthalmological disorder associated with many psychiatric factors. The aim of this systematic review is to evaluate the association between mental disorders and CSC. Methods: Articles about studies performed on humans on CSC published in peer-reviewed journals from 1 January 2010 to 31 December 2020 were included in the review. Results: We selected 21 research papers. Nine studies measured stress and anxious depressive symptoms, which are associated with CSC onset and recurrences, emerging as a state marker of the disease. Four out of the five studies focused on sleep disorders suggested a reliable association with CSC. Four studies evaluated other various psychiatric factors. The role of psychopharmacological medication has still not been elucidated (three studies). Conclusion: Multiple pieces of evidence highlights that CSC might arise in the context of systemic disease. This notion, together with the increasing evidence supporting a link between psychiatric disorders and choroidal thickness, suggests that CSC and mental disorders may share some etiopathogenetic pathways. Further research is needed to better investigate possible common etiopathogenetic pathways, especially vascular, immunological and endocrinological systems.

Assessing the difficulty of annotating medical data in crowdworking with help of experiments

Background As healthcare-related data proliferate, there is need to annotate them expertly for the purposes of personalized medicine. Crowdworking is an alternative to expensive expert labour. Annotation corresponds to diagnosis, so comparing unlabeled records to labeled ones seems more appropriate for crowdworkers without medical expertise. We modeled the comparison of a record to two other records as a triplet annotation task, and we conducted an experiment to investigate to what extend sensor-measured stress, task duration, uncertainty of the annotators and agreement among the annotators could predict annotation correctness. Materials and methods We conducted an annotation experiment on health data from a population-based study. The triplet annotation task was to decide whether an individual was more similar to a healthy one or to one with a given disorder. We used hepatic steatosis as example disorder, and described the individuals with 10 pre-selected characteristics related to this disorder. We recorded task duration, electro-dermal activity as stress indicator, and uncertainty as stated by the experiment participants (n = 29 non-experts and three experts) for 30 triplets. We built an Artificial Similarity-Based Annotator (ASBA) and compared its correctness and uncertainty to that of the experiment participants. Results We found no correlation between correctness and either of stated uncertainty, stress and task duration. Annotator agreement has not been predictive either. Notably, for some tasks, annotators agreed unanimously on an incorrect annotation. When controlling for Triplet ID, we identified significant correlations, indicating that correctness, stress levels and annotation duration depend on the task itself. Average correctness among the experiment participants was slightly lower than achieved by ASBA. Triplet annotation turned to be similarly difficult for experts as for non-experts. Conclusion Our lab experiment indicates that the task of triplet annotation must be prepared cautiously if delegated to crowdworkers. Neither certainty nor agreement among annotators should be assumed to imply correct annotation, because annotators may misjudge difficult tasks as easy and agree on incorrect annotations. Further research is needed to improve visualizations for complex tasks, to judiciously decide how much information to provide, Out-of-the-lab experiments in crowdworker setting are needed to identify appropriate designs of a human-annotation task, and to assess under what circumstances non-human annotation should be preferred.