Homeopathic use of modern drugs: therapeutic application of the organism paradoxical reaction or rebound effect

When Samuel Hahnemann systematized homeopathy and the effects of drugs on the state of human health, he described the primary action of drugs and the following secondary and opposite reaction of the organism. Seeking to apply this secondary action or vital reaction of the organism as therapeutic method, he postulated the principle of similitude, i.e. the prescription to ill individuals of drugs that cause similar symptoms in the healthy (similia similibus curentur). In modern pharmacology, secondary action (vital reaction) of drugs is known as rebound effect or paradoxical reaction of the organism. It has been observed after discontinuation of several classes of palliative (enantiopathic) drugs, namely those that act according to the principle of contraries (contraria contrariis curentur). Although in this case it is associated with severe and fatal iatrogenic events, rebound effect might awaken a healing reaction when the very same drug is employed according to the principle of similitude. The validity of the principle of similitude is proved by scientific evidence on rebound effect, whereas conventional drugs primary (therapeutic, adverse and side) effects might be equated to pathogenetic manifestations and thus be homeopathically applied. For this purpose a homeopathic materia medica and repertory comprising 1,251 modern drugs was elaborated using the monographs described in The United States Pharmacopeia Dispensing Information as source (www.newhomeopathicmedicines.com). Thus, the therapeutic range of homeopathy is broadened through the addition of hundreds of new medicines that might be employed in every kind of disease including countless modern clinical syndromes.

Dissolution Study on Grape Polyphenol Hard Gelatin Capsule Dietary Supplements

Methods for a dissolution study by ultra-high performance liquid chromatography/triple quadrupole mass spectrometry (UHPLC-QqQ/MS) analysis of grape polyphenol dietary supplements, namely, grape seed extract (GSE) and resveratrol (RSV) capsules, were developed following the guidance of United States Pharmacopeia (USP) <2040>. Two dissolution media, 0.1 N hydrochloric acid (pH 1.2) and 0.05 M acetate buffer (pH 4.6), were evaluated with dissolution apparatus (USP 1), 100 rpm rotation speed, and 900 ml dissolution medium volume. Dissolution profiling was performed over 120 min. Major phenolic compounds of gallic acid, catechin, epicatechin, and procyanidin B2 were quantitated to obtain the dissolution profile of GSE capsules, and trans-RSV was used for RSV capsules. Results indicated that the released trans-RSV for RSV capsules in both of the dissolution media meets the USP standards, and that for the GSE capsules, all the four marker compounds passed the dissolution test in the HCl medium but did not reach a 75% release within 60 min in the acetate buffer. These promising results suggest that the general USP dissolution protocols are adequate for the successful release of RSV capsules in HCl medium and acetate buffer and GSE capsules (in HCl medium), but may be inadequate for GSE capsules in acetate buffer. These results showed that under a low pH of 1.2 (simulated stomach environment), bioactive compounds were released on time from the GSE capsules and met the USP guidelines; however, under a higher pH of 4.6 (simulated duodenum environment), the same biomarkers failed, suggesting the need to further improve the dissolution of GSE over a wider range of pH environments to enhance bioavailability and efficacy.

Costs associated with United States pharmacopeia compliant infusion clinics

Purpose As costs continue to rise in oncology, a strategy that has been implemented to limit these costs is use of alternative sites of care. However, there are differences in regulatory standards between common sites of care such as freestanding infusion clinics and hospital outpatient departments. The costs associated with United States Pharmacopeia compliance were evaluated in order to better understand the cost of universally compliant hospital outpatient departments. Methods Annual operational costs associated with United States Pharmacopeia compliance were estimated for a 30-chair infusion clinic with United States Pharmacopeia <797> and <800> pharmacy cleanrooms for non-hazardous and hazardous drugs, respectively. Annual United States Pharmacopeia compliance costs included: competency assessments, personal protective equipment, closed system transfer devices, labels, cleaning supplies, and environmental monitoring. One-time costs included initial cleanroom construction and renovations. Published information and benchmarks provided baseline assumptions for patient volume, staffing, and unit costs. If no published data was available, prices were estimated based on a similarly sized clinic. Results Recurring annual costs for a 30-chair fully compliant infusion clinic were calculated to be $785,207. One-time costs associated with initial construction and renovations were estimated to be $1,365,207–$1,535,207 and $965,207–$1,005,207, respectively. Conclusions Costs associated with increased operational oversight and regulatory standards are a major contributing factor to the facility fee of hospital outpatient departments. Ultimately, all sites of care share in the goal to provide optimal patient care while considering all aspects of patient care, including cost. Therefore, a move towards consistent regulatory standards across all settings would aid in preventing discrepancies in care.

Quality assessment of selected co-trimoxazole suspension brands marketed in Nairobi County, Kenya

Introduction Quality of medicines in both developed and developing countries is sometimes compromised due to infiltration of counterfeit, substandard or degraded medicines into the markets. It is a public health concern as poor quality medicines endanger public health where patients are exposed to chemical toxins and/or sub-therapeutic doses. This could lead to reduced treatment efficacy and promote development of drug resistance. Co-trimoxazole, a fixed dose combination of sulfamethoxazole and trimethoprim, is a broad spectrum for bacterial diseases and is also used as a prophylaxis for opportunistic infections in HIV infected individuals. This study evaluated quality of selected co-trimoxazole suspension brands marketed in Nairobi County, Kenya. Methods A total of 106 samples were collected, categorized into 15 brands and evaluated for active pharmaceutical ingredient content (API) and pH following United States Pharmacopeia. Assay for API was conducted using High Performance Liquid Chromatography. Results were compared with pharmacopeia references. Visual examination of labels and confirmation of retention status of the brands with Pharmacy and Poisons Board retention register was carried out. Results The samples were primarily of local origin (86.7%). On October 23, 2019, retention status of six of the fifteen brands documented were no longer listed in the Pharmacy and Poisons Board retention register. Of the 106 samples tested 70.6% and 86.8% were compliant with United States Pharmacopeia (USP) specifications for pH and API respectively while 84.0% adhered to packaging and labelling requirements. Conclusion This study has demonstrated that majority of co-trimoxazole suspensions tested were compliant with USP requirements. Additionally, it has provided evidence of poor quality co-trimoxazole medicines that could compromise treatment of infectious diseases in children. This emphasizes the need for regular quality assurance tests to ensure only quality medicines are in the market.

Quality Attributes Comparison of Selected Brands of Rosuvastatin Calcium Tablets Marketed in the US and Bangladesh

Aims: This study investigated whether locally marketed rosuvastatin calcium tablets in Bangladesh have comparable physical and chemical attributes, including in vitro bioequivalence profiles, to the proprietary brand. Methodology: Nine generic products (G1-G9) containing 10 mg of rosuvastatin calcium were compared to the proprietary brand Crestor® (R1) and an FDA approved generic rosuvastatin calcium tablet (R2). Weight variation, diameter, thickness, friability, drug content, disintegration time and dissolution profiles were tested according to United States Pharmacopeia (USP) guidelines. In vitro bioequivalence requirements were assessed by calculating difference (f1) and similarity (f2) factors. Results: The generic products complied with the pharmacopeial requirements for weight variation, disintegration time and friability. All the tablets had drug ranging between 92%-105% and released more than 80% of rosuvastatin within first 15-30 minutes. However, for brands G5, G7 and G8 the f1 values were 15.7%, 15.82% and 25.21% respectively and their f2 values were 41.8, 41.6 and 32.6 respectively whereas for G9 the f2 value was 43.4. These brands have thus failed to meet in vitro bioequivalence requirements. Conclusion: We conclude that few substandard generics of rosuvastatin calcium has somehow found its way to the market and further studies are required to ascertain their noncompliance.

Preparation and Evaluation of Extemporaneously Compounded Aspirin Capsules from Crushed Aspirin Tablets

Aims: Extemporaneous preparations of medications might bring about technical and clinical consequences due to formulation failures. Therefore, all such prepared formulas should undergo valid and reliable procedures supported by solid data. Otherwise, patients can experience significant risk due to microbial contamination or physical or chemical changes during the preparation process. Thus, effective extemporaneous preparation relies on correct calculations to avoid extra and serious harm. Therefore, because 50-mg aspirin capsules are not available in Saudi Arabia, this study aimed to formulate 50-mg capsules from available 100-mg aspirin tablets. Methodology: Quality control tests of the preparations were carried out at the time of preparation and after one month of storage at 25 °C and at 40 °C and 75% relative humidity. All tests were carried out according to the British and United States pharmacopeia monograph of aspirin. Results: The drug content assay and uniformity test indicated that the aspirin capsules were within the pharmacopeial limits. The disintegration time for all aspirin capsules was within the pharmacopeial limits of 30 minutes. The aspirin release profile showed that approximately 90% of the aspirin dissolved after 10 minutes. Conclusion: The results indicated that the extemporaneous preparation of ASA capsules complied with the quality control tests for freshly prepared capsules and after one month of storage at room temperature and at 40 °C and 75% relative humidity. The dissolution profile of these capsules indicates immediate and high release of ASA, which is essential to ensure the required absorption. This study is of great importance for patients who need to take this dose of ASA. Pharmacists can prepare good-quality capsules with the desired ASA content using a 100-mg ASA tablet as a source of the active ingredient.

Tubing determination in an hematology oncology clinic

United States Pharmacopeia (USP) Chapter <800> for hazardous drug (HD) handling in healthcare settings requires HD be primed intravenously with a non-HD solution prior to dispensing. This review details our clinic’s algorithm for determining tubing needs for medications used in an hematology oncology clinic. Factors to consider are volume, irritant and vesicant properties, and compatibility with hydration solution.

Impact of Critical Material Attributes (CMAs)-Particle Shape on Miniature Pharmaceutical Unit Operations

The U.S. Food and Drug Administration (FDA) emphasizes drug product development by Quality by Design (QbD). Critical material attributes (CMAs) are a QbD element that has an impact on pharmaceutical operations and product quality. Pharmaceutical drugs often crystallize as needle-shaped (a CMA) particles and affect the process due to poor flowability, low bulk density, and high compressibility, and eventually the product performance. In this study, the product obtained from crystallization was needle-shaped Ciprofloxacin HCl (CIPRO), formed lumps during drying, and compacted during processing through feeders. To delump small amounts of materials and break the needles, multiple available devices (mortar-pestle, Krups grinder) and custom-made grinder were assessed before formulation. The processed CIPRO powder was then used to make tablets in the miniature tablet manufacturing unit developed by the team at MIT. The critical quality attributes (CQA) of the tablets, set by the United States Pharmacopeia (USP), were then assessed for the drug powder processed with each of these devices. Powder properties comparable to commercial CIPRO were obtained when the custom MIT-designed grinder was used, leading to tablets that meet the USP criteria, with comparable dissolution profiles of those for marketed CIPRO tablets. This study demonstrates how needle-shaped crystals have an impact on pharmaceutical operations, even if it is on a miniature scale, and how proper shape and subsequent flow properties can be obtained by processing the particles through the MIT team-designed grinder. Graphical Abstract

Quality and Authenticity of Metformin Tablets Circulating on Japanese Websites

Background Low-quality medicines and falsified medicines represent long-standing problems in developing countries. In Southeast Asia, the circulation of low-quality diabetes drugs (metformin) has been confirmed. It is possible that low-quality metformin has entered Japan via personal import through the Internet. This study evaluated the pharmaceutical quality and authenticity of metformin tablets obtained via the Internet in Japan. Methods In total, 33 samples of 500-mg metformin tablets and 7 samples of extended-release/sustained-release tablets (500, 750, and 1,000 mg) were purchased via personal import in January 2017. Confirmation of a prescription was never requested purchase. The obtained samples were subjected to visual observations and authenticity investigations. Additionally, quantitative analysis, content uniformity and dissolution tests were performed using HPLC–PDA. Results Our authenticity investigations revealed that seven samples were genuine products, whereas the authenticity of the remaining 33 samples was unclear. Referring to United States Pharmacopeia 2014 for validation, four samples failed quality testing, five samples failed content uniformity testing, and two samples failed dissolution testing. Conclusions Our findings illustrate that metformin tablets of poor-quantity and unregistered/unlicensed doses are available online and that it is important to increase consumer awareness about the presence of these medicines on the Internet to prevent the purchase of substandard medicines.

Efficacy of Three Commercial Disinfectants in Reducing Microbial Surfaces’ Contaminations of Pharmaceuticals Hospital Facilities

To evaluate and validate the efficacy of disinfectants used in our cleaning procedure, in order to reduce pharmaceutical hospital surfaces’ contaminations, we tested the action of three commercial disinfectants on small representative samples of the surfaces present in our hospital cleanrooms. These samples (or coupons) were contaminated with selected microorganisms for the validation of the disinfectants. The coupons were sampled before and after disinfection and the microbial load was assessed to calculate the Log10 reduction index. Subsequently, we developed and validated a disinfection procedure on real surfaces inside the cleanrooms intentionally contaminated with microorganisms, using approximately 107–108 total colony forming units per coupon. Our results showed a bactericidal, fungicidal, and sporicidal efficacy coherent to the acceptance criteria suggested by United States Pharmacopeia 35 <1072>. The correct implementation of our cleaning and disinfection procedure, respecting stipulated concentrations and contact times, led to a reduction of at least 6 Log10 for all microorganisms used. The proposed disinfection procedure reduced the pharmaceutical hospital surfaces’ contaminations, limited the propagation of microorganisms in points adjacent to the disinfected area, and ensured high disinfection and safety levels for operators, patients, and treated surfaces.