Basic block diagram

1984 ◽  
pp. 112-129
Author(s):  
Keyword(s):  
Block Diagram ◽  
Basic Block

scholarly journals Automated Line for Post-Harvest Processing of Root Crops and Potatoes

2020 ◽  
Vol 14 (1) ◽  
pp. 22-26
Author(s):  
A. S. Dorokhov ◽  
M. A. Mosyakov ◽  
N. V. Sazonov
Keyword(s):  
Block Diagram ◽  
Basic Block ◽  
Potato Tubers ◽  
Labor Costs ◽  
System Operation ◽  
Line System ◽  
Post Harvest ◽  
Root Crops ◽  
Automated Line

In the process of post-harvest processing of root crops and potatoes in Russia, mechanical sortings of various types are used, which allows to separate the material according to the size criterion and removing impurities. The main requirement for this equipment is to ensure the quality and reliability of technological processes for the impurities separation and the root crops separation into fractions with minimal damage. (Research purpose) To improve the quality of potato tubers sorting using an automated line for post-harvest processing of root crops and potatoes, which allows to reduce their damage and ensure high accuracy of separation into fractions by size. (Materials and methods) The authors studied the automated process of root crops post-harvest processing. They developed approaches and basic technical, technological and constructive solutions aimed at improving the efficiency of root crops and potatoes post-harvest processing. To automate the root crops and potatoes processing, the authors installed the universal web camera Logitech HD Pro C920. They created a basic block diagram of the electronic line system operation. (Results and discussion) The authors clarified the size and mass characteristics of potato tubers with a total weight of 38 356 grams of Nevsky variety of the 2019 harvest and their shape coefficient. They developed design documentation. An experimental line was prepared for potato tubers post-harvest sorting with an original circuit diagram of the electronic system operation. The authors substantiated its design and operational-technological parameters. Practical studies of the automated line work were carried out in the Ryazan region on the basis of the Institute of Seed Production and Agrotechnologies – a branch of the Federal Scientific Agroengineering Center VIM. (Conclusions) The authors determined that the developed automated line for root crops and potatoes post-harvest sorting thanks to digital technologies reduced labor costs by eliminating manual sorting, as well as improving the quality of potato tubers and the accuracy of sorting by size to 95-98 percent. It was revealed that damage to potato tubers did not exceed one percent.

scholarly journals Building lifecycle management based on 4D modelling as the main workspace for building risk assessment

2020 ◽  
Vol 224 ◽  
pp. 02023
Author(s):  
R Kazaryan ◽  
N Galaeva ◽  
R Avetisyan ◽  
Sh Aliev
Keyword(s):  
Information Technology ◽  
Life Cycle ◽  
System Analysis ◽  
Planning Process ◽  
Block Diagram ◽  
Labour Productivity ◽  
Development Trend ◽  
Basic Block ◽  
Mathematical Methods ◽  
Element Base

The use of information technology in the management of construction projects has become a decisive factor for the successful completion of projects, taking into account time, quality and financial costs. There are challenges in visualizing the planning process and integrating information between stakeholders. The paper considers some aspects of the development trend of information technology in construction. The element base, including the risks arising during the design and construction, associated with the direct use of computer and mathematical models of the object in the design is considered. The generated information models will provide basic information for the participants in the design process, which ultimately will be the basis of the element base of an effective tool for ensuring project life cycle management. The following methods were used: system analysis, logical-mathematical modelling, systems theory, economic-visual modelling, research methods of operations, economic and mathematical methods. A basic block diagram of 4D modelling is presented to minimize the occurrence of risks during design. The model allows considering the possibility of assessing the duration of the project, the level of labour productivity, as well as visualizing the construction process. The presented analysis indicates the importance of using 4D modelling in relation to the life cycle of the object in order to prevent the possibility of construction risks.

scholarly journals Electrodialysis desalination and limiting concentration of highly mineralized waters

2020 ◽  
pp. 104-110
Author(s):  
D.D. Kucheruk ◽  
◽  
L.A. Deremeshko ◽  
M.N. Balakina ◽  
I.Ya. Pischay ◽  
...  
Keyword(s):  
Water Treatment ◽  
Mine Water ◽  
Block Diagram ◽  
Basic Block ◽  
Colloid Chemistry ◽  
Sodium Chloride Solutions ◽  
Material Resources ◽  
Secondary Material ◽  
Mine Water Treatment ◽  
Significant Concentration

We study the regularities of the process of desalination of sodium chloride solutions with a limiting concentration of 10.2 to 37.7 g/dm3, which simulate chloride wastewater of some mining enterprises. We use an electrodializerconcentrator with advanced design developed at A.V. Dumansky Institute of Colloid Chemistry and Water Chemistry of the NASU. The need to develop such device is caused by the necessity of the deep concentration of concentrates obtained during the wastewater treatment in order to facilitate their further processing into secondary material resources. The electrodialyzers produced by the industry are unsuitable for a significant concentration, since the concentration chambers in such devices and the desalination chambers are pumped with the initial solution. This leads to a significant reduction in the concentration of the resulting brine. Studies have shown that the use of the specified electrodializer-concentrator allowed one to obtain for 100 min from solutions with a concentration of 10.2, 18.8, and 37.7 g/dm3 Cl-ion diluents containing them, respectively, 0.2, 0.6, and 1.0 g/dm3 and to concentrate the brine by 10.6, 6.7, and 4.0 times, respectively. Based on this research and the experience gained at the Institute in the field of mine water treatment, a basic block diagram of the mine water treatment is developed. It is based on a combination of advanced electroodialysis and reverse osmosis. The complex processing of substances removed during the mine water treatment involves their use in relevant industries; additional desalination diluent can be used for technical purposes, and its excess is discharged into reservoirs.

Public administration: digitalization of strategic planning tasks

2021 ◽  
pp. 90-100
Author(s):  
N.I. Nikolsky ◽  
D.A. Rubwalter ◽  
O.V. Rudensky
Keyword(s):  
Block Diagram ◽  
Control Process ◽  
Scientific Work ◽  
Semantic Content ◽  
Strategy Development ◽  
Basic Block ◽  
Software Modeling ◽  
Rfbr Grant ◽  
Scientific Project ◽  
Specialized Experts

The article was prepared within the framework of the RFBR scientific project «Interdisciplinary study of the processes of digitalization, computerization and measurement of the role of science in the development and implementation of political decisions» (RFBR grant No. 20-010-00179). The main part of this article is related to conceptual and software developments on automating the process of managing the textual and semantic content of strategies. At this stage, scientific work is aimed at developing software modeling and automation of the control process. It includes a number of functions focused on digitalization and programming of the interdisciplinary and multifunctional task of developing, implementing and monitoring various types of strategies of the Russian Federation. When developing software modeling, the authors adopt a basic block diagram in the form of an industry strategy, the content structure of which can be transformed depending on the type of strategy (socio-economic, scientific and technological, etc.). The system management model for automating the preparation of textual strategy proposals includes the participation of specialized experts and well- known scientists who digitally evaluate strategy texts, including also an analytical mechanism for digitalizing the selection of the final text and its editing by the relevant ministries responsible for strategy development.

scholarly journals Automatic Movable Platform for Crossing Railway Track

2019 ◽  
Vol 8 (3) ◽  
pp. 722-724
Keyword(s):  
Block Diagram ◽  
The Elderly ◽  
Mobile Platform ◽  
Railway Track ◽  
Stepper Motor ◽  
Basic Block ◽  
Elderly Persons ◽  
Infrared Sensors ◽  
Railway Stations ◽  
Movable Platform

In order to facilitate the passengers in railway stations without disturbing the train activities, staircase and bridges were laid foundation. But during peak hours, it becomes more rush and crowded that becomes very difficult for the elderly persons or handicapped persons to use the bridge. To overcome this circumstance, we propose the idea of closing and opening the mobile platform in railway tracks automatically in this project. Mobile platform is one that connects two platforms together and thus facilitates passengers to use the path efficiently and reach the opposite stage. In this module, we make use of two Sensors on both sides of the track. When the train reaches the stage, the first sensor automatically closes the mobile stage. Once the train leaves the station, the second sensor helps to bridge two platforms mechanically. We make use of infrared sensors along with integration of microcontroller to sense the presence of train and it sends the pulses to stepper motor device that helps in closing the mobile stage. In order to avoid the confusions to the pedestrians regarding the usage of bridge, we implement green and red signal indication. When the signal is green, the pedestrians can use the bridge. If it turns red it indicates that train is arriving and hence bridge is closed and cannot be used until it leaves. The basic block diagram along with involved hardware and software devices are discussed in detail.

scholarly journals Simulation of the movement of hedge cutter links in the Simulink application of the Matlab package

2021 ◽  
Vol 875 (1) ◽  
pp. 012004
Author(s):  
L D Bukhtoyarov ◽  
M V Drapalyuk ◽  
A V Pridvorova
Keyword(s):  
Computer Aided Design ◽  
Block Diagram ◽  
3D Models ◽  
Design System ◽  
Mechanical Transmission ◽  
Time Interval ◽  
Basic Block ◽  
Computer Aided ◽  
Matlab Package ◽  
Aided Design

Abstract Simulation modeling allows researching a mechanism consisting of many links interacting with each other according to complex laws. In order not to write a model for each node of the investigated mechanism, it is advisable to use ready-made blocks of the Simulink application. To simplify the process of creating blocks responsible for the links of the mechanism, we used the Solidworks computer-aided design system. 3d models of each link were designed, kinematic connections between them were established. Thus, the mass characteristics of the links, their geometric parameters, moments of inertia and kinematic pairs were obtained. After exporting the model from the computer-aided design system to Simulink of the Matlab package, a basic block diagram was obtained which was supplemented with disturbing input signals, virtual oscilloscopes for characterizing, mechanical transmission units, etc. Based on the obtained coordinates of the frame links and the rotor knives, dependencies were constructed to determine the kinematics of their movement in three planes, which made it possible to clearly demonstrate the top and rear view of the mechanism under study in the considered time interval. The developed simulation model can be upgraded to study the dynamic characteristics of the mechanism.

An Image Reconstruction System Applied to High Voltage Microscopy

1975 ◽  
Vol 33 ◽  
pp. 292-293
Author(s):  
D. E. Johnson
Keyword(s):  
High Voltage ◽  
Prior Information ◽  
Block Diagram ◽  
Three Dimensional ◽  
Real Space ◽  
Two Dimensional ◽  
Efficient Manner ◽  
Fourier Methods ◽  
Tilt Series ◽  
Methods Of Reconstruction

Increased specimen penetration; the principle advantage of high voltage microscopy, is accompanied by an increased need to utilize information on three dimensional specimen structure available in the form of two dimensional projections (i.e. micrographs). We are engaged in a program to develop methods which allow the maximum use of information contained in a through tilt series of micrographs to determine three dimensional speciman structure.In general, we are dealing with structures lacking in symmetry and with projections available from only a limited span of angles (±60°). For these reasons, we must make maximum use of any prior information available about the specimen. To do this in the most efficient manner, we have concentrated on iterative, real space methods rather than Fourier methods of reconstruction. The particular iterative algorithm we have developed is given in detail in ref. 3. A block diagram of the complete reconstruction system is shown in fig. 1.

On-line alignment and astigmatism correction using a TV and personal computer

1993 ◽  
Vol 51 ◽  
pp. 202-203
Author(s):  
F. Hosokawa ◽  
Y. Kondo ◽  
T. Honda ◽  
Y. Ishida ◽  
M. Kersker
Keyword(s):  
High Resolution ◽  
Personal Computer ◽  
Block Diagram ◽  
Incident Beam ◽  
Ccd Camera ◽  
Alignment Procedure ◽  
Astigmatism Correction ◽  
Transmission Electron ◽  
Alignment System ◽  
On Line

High-resolution transmission electron microscopy must attain utmost accuracy in the alignment of incident beam direction and in astigmatism correction, and that, in the shortest possible time. As a method to eliminate this troublesome work, an automatic alignment system using the Slow-Scan CCD camera has been introduced recently. In this method, diffractograms of amorphous images are calculated and analyzed to detect misalignment and astigmatism automatically. In the present study, we also examined diffractogram analysis using a personal computer and digitized TV images, and found that TV images provided enough quality for the on-line alignment procedure of high-resolution work in TEM. Fig. 1 shows a block diagram of our system. The averaged image is digitized by a TV board and is transported to a computer memory, then a diffractogram is calculated using an FFT board, and the feedback parameters which are determined by diffractogram analysis are sent to the microscope(JEM- 2010) through the RS232C interface. The on-line correction system has the following three modes.

The methodological approach for the determination of the pressure of artificial raindrops as a question of the theory of splash soil erosion

2020 ◽  
pp. 24-28
Author(s):  
Mihail Zver'kov
Keyword(s):  
Block Diagram ◽  
Methodological Approach ◽  
Control Measures ◽  
Soil Conditions ◽  
Effective Pressure ◽  
Long Distance ◽  
Splash Erosion ◽  
Rain Drops ◽  
Artificial Rain ◽  
The Impact

To the article the results of the theoretical and experimental researches are given on questions of estimates of the dynamic rate effect of raindrop impact on soil. The aim of this work was to analyze the current methods to determine the rate of artificial rain pressure on the soil for the assessment of splash erosion. There are the developed author’s method for calculation the pressure of artificial rain on the soil and the assessment of splash erosion. The study aims to the justification of evaluation methods and the obtaining of quantitative characteristics, prevention and elimination of accelerated (anthropogenic) erosion, the creation and the realization of the required erosion control measures. The paper considers the question of determining the pressure of artificial rain on the soil. At the moment of raindrops impact, there is the tension in the soil, which is called vertical effective pressure. It is noted that the impact of rain drops in the soil there are stresses called vertical effective pressure. The equation for calculation of vertical effective pressure is proposed in this study using the known spectrum of raindrops. Effective pressure was 1.4 Pa for the artificial rain by sprinkler machine «Fregat» and 5.9 Pa for long distance sprinkler DD-30. The article deals with a block diagram of the sequence for determining the effective pressure of rain drops on the soil. This diagram was created by the author’s method of calculation of the effective pressure of rain drops on the soil. The need for an integrated approach to the description of the artificial rain impact on the soil is noted. Various parameters characterizing drop erosion are considered. There are data about the mass of splashed soil in the irrigation of various irrigation machinery and installations. For example, the rate (mass) of splashed soil was 0.28…0.78 t/ha under irrigation sprinkler apparatus RACO 4260–55/701C in the conditions of the Ryazan region. The method allows examining the environmental impact of sprinkler techniques for analyzes of the pressure, caused by raindrops, on the soil. It can also be useful in determining the irrigation rate before the runoff for different types of sprinkler equipment and soil conditions.

CALCULATION OF STAGES OF THE TECHNOLOGICAL PROCESS OF MANUFACTURE OF PPD DETECTORS USING COMPUTER MATHEMATICAL MODELING AND PRODUCTION OF ALPHA RADIOMETER ON THEIR BASIS

2020 ◽  
Vol 7 (2) ◽  
pp. 21-28
Author(s):  
SALI RADZHAPOV ◽  
◽  
RUSTAM RAKHIMOV ◽  
BEGJAN RADZHAPOV ◽  
MARS ZUFAROV
Keyword(s):  
Mathematical Modeling ◽  
Technological Process ◽  
Block Diagram ◽  
Large Diameter ◽  
Silicon Detector ◽  
Digital Processing ◽  
Main Element ◽  
Alpha Radiation ◽  
Initial Silicon ◽  
Natural Isotopes

The article describes the developed radiometer for Express measurement of alpha radiation of radioactive elements based on a large-diameter silicon detector. The main element of the PPD detector is made using computer mathematical modeling of all stages of the technological process of manufacturing detectors, taking into account at each stage the degree of influence of the properties of the initial silicon on the electrophysical and radiometric characteristics of the detector. Detectors are manufactured for certain types of devices. The developed radiometer is designed to measure alpha radiation of natural isotopes (238U, 234U, 232Th, 226Ra, 222Rn, 218Po, 214Bi, etc.) in various environments. It also shows the principle of operation of the device, provides a block diagram of the measuring complex, describes the electronic components of the radiometer, as well as the block diagram. Signal transformations (spectrum transfer, filtering, accumulation) are implemented programmatically on the basis of a digital processing module. The device can detect the presence of specific elements in various environments, as well as protect people from the harmful effects of adverse radiation and can be used both in the field and stationary.

Sign in / Sign up

Export Citation Format

Share Document