Fabricating Futures: Envisioning Scenarios for Home Fabrication Technology

2015 ◽  
pp. 193-221 ◽  
Author(s):  
Joshua G. Tanenbaum ◽  
Karen Tanenbaum
Keyword(s):  
Fabrication Technology

2D Honeycomb Silicon: A Review on Theoretical Advances for Silicene Field-Effect Transistors

2020 ◽  
Vol 16 (4) ◽  
pp. 595-607 ◽  
Author(s):  
Mu Wen Chuan ◽  
Kien Liong Wong ◽  
Afiq Hamzah ◽  
Shahrizal Rusli ◽  
Nurul Ezaila Alias ◽  
...  
Keyword(s):  
Field Effect ◽  
Field Effect Transistors ◽  
Semiconductor Industry ◽  
Honeycomb Lattice ◽  
Theoretical Studies ◽  
Fabrication Technology ◽  
Dirac Cone ◽  
Free Standing ◽  
Silicene Nanoribbons ◽  
Effect Transistor

Catalysed by the success of mechanical exfoliated free-standing graphene, two dimensional (2D) semiconductor materials are successively an active area of research. Silicene is a monolayer of silicon (Si) atoms with a low-buckled honeycomb lattice possessing a Dirac cone and massless fermions in the band structure. Another advantage of silicene is its compatibility with the Silicon wafer fabrication technology. To effectively apply this 2D material in the semiconductor industry, it is important to carry out theoretical studies before proceeding to the next step. In this paper, an overview of silicene and silicene nanoribbons (SiNRs) is described. After that, the theoretical studies to engineer the bandgap of silicene are reviewed. Recent theoretical advancement on the applications of silicene for various field-effect transistor (FET) structures is also discussed. Theoretical studies of silicene have shown promising results for their application as FETs and the efforts to study the performance of bandgap-engineered silicene FET should continue to improve the device performance.

scholarly journals Mastering of NIL Stamps with Undercut T-Shaped Features from Single Layer to Multilayer Stamps

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 956
Author(s):  
Philipp Taus ◽  
Adrian Prinz ◽  
Heinz D. Wanzenboeck ◽  
Patrick Schuller ◽  
Anton Tsenov ◽  
...  
Keyword(s):  
Electron Beam Lithography ◽  
Nanoimprint Lithography ◽  
Silicon Oxide ◽  
Three Dimensional ◽  
Single Layer ◽  
Fabrication Technology ◽  
Large Area ◽  
Structural Colors ◽  
Biomimetic Structures ◽  
Morpho Butterfly

Biomimetic structures such as structural colors demand a fabrication technology of complex three-dimensional nanostructures on large areas. Nanoimprint lithography (NIL) is capable of large area replication of three-dimensional structures, but the master stamp fabrication is often a bottleneck. We have demonstrated different approaches allowing for the generation of sophisticated undercut T-shaped masters for NIL replication. With a layer-stack of phase transition material (PTM) on poly-Si, we have demonstrated the successful fabrication of a single layer undercut T-shaped structure. With a multilayer-stack of silicon oxide on silicon, we have shown the successful fabrication of a multilayer undercut T-shaped structures. For patterning optical lithography, electron beam lithography and nanoimprint lithography have been compared and have yielded structures from 10 µm down to 300 nm. The multilayer undercut T-shaped structures closely resemble the geometry of the surface of a Morpho butterfly, and may be used in future to replicate structural colors on artificial surfaces.

Liquid metal-based nanocomposite materials: Fabrication technology and applications

Nanoscale ◽  
2021 ◽  
Author(s):  
Hiroki Ota ◽  
Nyamjargal Ochirkhuyag ◽  
Ryosuke Matsuda ◽  
Zihao Song ◽  
Fumika Nakamura ◽  
...  
Keyword(s):  
Liquid Metal ◽  
Flexible Electronics ◽  
Liquid Metals ◽  
Nanocomposite Materials ◽  
Fabrication Technology

Research on liquid metals has been steadily garnering more interest in recent times because the properties of these metals are conducive to flexible electronics applications; further, these metals are in...

Synthesis of high surface area and functionalized nanoporous biocarbons and their efficiency for CO2 capture and supercapacitors

2021 ◽  
Author(s):  
Gurwinder Singh ◽  
Rohan Bahadur ◽  
Ajanya Maria Ruban ◽  
Jefrin Marykala Davidraj ◽  
Dawei Su ◽  
...  
Keyword(s):  
Energy Storage ◽  
Surface Area ◽  
Co2 Capture ◽  
Water Purification ◽  
High Surface ◽  
High Surface Area ◽  
Energy Storage And Conversion ◽  
Waste Biomass ◽  
Fabrication Technology ◽  
Significant Attention

Nanoporous biocarbons derived from waste biomass have created significant attention owing to their great potential for energy storage and conversion and water purification. However, the fabrication technology for these materials...

Binary Precision Neural Network Manycore Accelerator

2021 ◽  
Vol 17 (2) ◽  
pp. 1-27
Author(s):  
Morteza Hosseini ◽  
Tinoosh Mohsenin
Keyword(s):  
Neural Network ◽  
Low Power ◽  
Image Classification ◽  
Case Studies ◽  
Average Power ◽  
Total Power ◽  
Fabrication Technology ◽  
Population Count ◽  
Cluster Architecture ◽  
Domain Specific

This article presents a low-power, programmable, domain-specific manycore accelerator, Binarized neural Network Manycore Accelerator (BiNMAC), which adopts and efficiently executes binary precision weight/activation neural network models. Such networks have compact models in which weights are constrained to only 1 bit and can be packed several in one memory entry that minimizes memory footprint to its finest. Packing weights also facilitates executing single instruction, multiple data with simple circuitry that allows maximizing performance and efficiency. The proposed BiNMAC has light-weight cores that support domain-specific instructions, and a router-based memory access architecture that helps with efficient implementation of layers in binary precision weight/activation neural networks of proper size. With only 3.73% and 1.98% area and average power overhead, respectively, novel instructions such as Combined Population-Count-XNOR , Patch-Select , and Bit-based Accumulation are added to the instruction set architecture of the BiNMAC, each of which replaces execution cycles of frequently used functions with 1 clock cycle that otherwise would have taken 54, 4, and 3 clock cycles, respectively. Additionally, customized logic is added to every core to transpose 16×16-bit blocks of memory on a bit-level basis, that expedites reshaping intermediate data to be well-aligned for bitwise operations. A 64-cluster architecture of the BiNMAC is fully placed and routed in 65-nm TSMC CMOS technology, where a single cluster occupies an area of 0.53 mm 2 with an average power of 232 mW at 1-GHz clock frequency and 1.1 V. The 64-cluster architecture takes 36.5 mm 2 area and, if fully exploited, consumes a total power of 16.4 W and can perform 1,360 Giga Operations Per Second (GOPS) while providing full programmability. To demonstrate its scalability, four binarized case studies including ResNet-20 and LeNet-5 for high-performance image classification, as well as a ConvNet and a multilayer perceptron for low-power physiological applications were implemented on BiNMAC. The implementation results indicate that the population-count instruction alone can expedite the performance by approximately 5×. When other new instructions are added to a RISC machine with existing population-count instruction, the performance is increased by 58% on average. To compare the performance of the BiNMAC with other commercial-off-the-shelf platforms, the case studies with their double-precision floating-point models are also implemented on the NVIDIA Jetson TX2 SoC (CPU+GPU). The results indicate that, within a margin of ∼2.1%--9.5% accuracy loss, BiNMAC on average outperforms the TX2 GPU by approximately 1.9× (or 7.5× with fabrication technology scaled) in energy consumption for image classification applications. On low power settings and within a margin of ∼3.7%--5.5% accuracy loss compared to ARM Cortex-A57 CPU implementation, BiNMAC is roughly ∼9.7×--17.2× (or 38.8×--68.8× with fabrication technology scaled) more energy efficient for physiological applications while meeting the application deadline.

scholarly journals A Peristaltic Micropump Based on the Fast Electrochemical Actuator: Design, Fabrication, and Preliminary Testing

Actuators ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 62
Author(s):  
Ilia Uvarov ◽  
Pavel Shlepakov ◽  
Artem Melenev ◽  
Kechun Ma ◽  
Vitaly Svetovoy ◽  
...  
Keyword(s):  
High Performance ◽  
Drug Delivery Systems ◽  
Main Part ◽  
Fabrication Technology ◽  
Fabrication Procedure ◽  
Order Of Magnitude ◽  
Peristaltic Micropump ◽  
Biomedical Field ◽  
Lift Off ◽  
Actuator Design

Microfluidic devices providing an accurate delivery of fluids at required rates are of considerable interest, especially for the biomedical field. The progress is limited by the lack of micropumps, which are compact, have high performance, and are compatible with standard microfabrication. This paper describes a micropump based on a new driving principle. The pump contains three membrane actuators operating peristaltically. The actuators are driven by nanobubbles of hydrogen and oxygen, which are generated in the chamber by a series of short voltage pulses of alternating polarity applied to the electrodes. This process guaranties the response time of the actuators to be much shorter than that of any other electrochemical device. The main part of the pump has a size of about 3 mm, which is an order of magnitude smaller in comparison with conventional micropumps. The pump is fabricated in glass and silicon wafers using standard cleanroom processes. The channels are formed in SU-8 photoresist and the membrane is made of SiNx. The channels are sealed by two processes of bonding between SU-8 and SiNx. Functionality of the channels and membranes is demonstrated. A defect of electrodes related to the lift-off fabrication procedure did not allow a demonstration of the pumping process although a flow rate of 1.5 µl/min and dosage accuracy of 0.25 nl are expected. The working characteristics of the pump make it attractive for the use in portable drug delivery systems, but the fabrication technology must be improved.

scholarly journals Engineering multifunctional bactericidal nanofibers for abdominal hernia repair

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Samson Afewerki ◽  
Nicole Bassous ◽  
Samarah Vargas Harb ◽  
Marcus Alexandre F. Corat ◽  
Sushila Maharjan ◽  
...  
Keyword(s):  
Hernia Repair ◽  
Biological Properties ◽  
Abdominal Hernia ◽  
Fabrication Technology ◽  
Tissue Adhesions ◽  
Blood Vessel Formation ◽  
Clinical Challenge ◽  
Engineering Strategy ◽  
Clinical Problems

AbstractThe engineering of multifunctional surgical bactericidal nanofibers with inherent suitable mechanical and biological properties, through facile and cheap fabrication technology, is a great challenge. Moreover, hernia, which is when organ is pushed through an opening in the muscle or adjacent tissue due to damage of tissue structure or function, is a dire clinical challenge that currently needs surgery for recovery. Nevertheless, post-surgical hernia complications, like infection, fibrosis, tissue adhesions, scaffold rejection, inflammation, and recurrence still remain important clinical problems. Herein, through an integrated electrospinning, plasma treatment and direct surface modification strategy, multifunctional bactericidal nanofibers were engineered showing optimal properties for hernia repair. The nanofibers displayed good bactericidal activity, low inflammatory response, good biodegradation, as well as optimal collagen-, stress fiber- and blood vessel formation and associated tissue ingrowth in vivo. The disclosed engineering strategy serves as a prominent platform for the design of other multifunctional materials for various biomedical challenges.

Infrared heated μ-blistering, a new fabrication technology for HARMST

2014 ◽  
Vol 20 (10-11) ◽  
pp. 2017-2022
Author(s):  
Thomas Schmidt ◽  
Claas Mueller ◽  
Holger Reinecke
Keyword(s):  
Fabrication Technology

A new fabrication technology of FinFETs using a neutral beam etching

2005 ◽  
Author(s):  
K. Endo ◽  
S. Noda ◽  
T. Ozaki ◽  
S. Samukawa ◽  
M. Masahara ◽  
...  
Keyword(s):  
Neutral Beam ◽  
Fabrication Technology ◽  
Neutral Beam Etching
Sign in / Sign up

Export Citation Format

Share Document