scholarly journals Influence of SMA reinforcement on the impact resistance of GFRP composite laminates under different temperatures

2016 ◽  
Vol 39 (3) ◽  
pp. 889-899 ◽  
Author(s):  
K PAZHANIVEL ◽  
G B BHASKAR ◽  
A ELAYAPERUMAL ◽  
P ANANDAN ◽  
S ARUNACHALAM
Keyword(s):  
Composite Laminates ◽  
Impact Resistance ◽  
Gfrp Composite ◽  
Different Temperatures ◽  
The Impact

Influence of Stainless Steel Wire Reinforcement on the Impact Resistance of GFRP Composite Laminates

2015 ◽  
Vol 40 (4) ◽  
pp. 1111-1122 ◽  
Author(s):  
K. Pazhanivel ◽  
G. B. Bhaskar ◽  
A. Elayaperumal ◽  
P. Anandan ◽  
S. Arunachalam
Keyword(s):  
Stainless Steel ◽  
Composite Laminates ◽  
Steel Wire ◽  
Impact Resistance ◽  
Stainless Steel Wire ◽  
Gfrp Composite ◽  
The Impact

IMPACT RESISTANCE PROPERTIES OF KEVLAR/GLASS FIBER HYBRID COMPOSITE LAMINATES

2015 ◽  
Vol 76 (3) ◽  
Author(s):  
Norazean Shaari ◽  
Aidah Jumahat ◽  
M. Khafiz M. Razif
Keyword(s):  
Glass Fiber ◽  
Hybrid Composite ◽  
Composite Laminates ◽  
Impact Damage ◽  
Impact Resistance ◽  
Impact Behavior ◽  
Slight Reduction ◽  
Depth Of Penetration ◽  
Damage Degree ◽  
The Impact

In this paper, the impact behavior of Kevlar/glass fiber hybrid composite laminates was investigated by performing the drop weight impact test (ASTM D7136). Composite laminates were fabricated using vacuum bagging process with an epoxy matrix reinforced with twill Kevlar woven fiber and plain glass woven fiber. Four different types of composite laminates with different ratios of Kevlar to glass fiber (0:100, 20:80, 50:50 and 100:0) were manufactured. The effect of Kevlar/glass fiber content on the impact damage behavior was studied at 43J nominal impact energy. Results indicated that hybridization of Kevlar fiber to glass fiber improved the load carrying capability, energy absorbed and damage degree of composite laminates with a slight reduction in deflection. These results were further supported through the damage pattern analysis, depth of penetration and X-ray evaluation tests. Based on literature work, studies that have been done to investigate the impact behaviour of woven Kevlar/glass fiber hybrid composite laminates are very limited. Therefore, this research concentrates on the effect of Kevlar on the impact resistance properties of woven glass fibre reinforced polymer composites.

EFFECT OF ANTIBIOTICS AUGMENTATION AND STORAGE CONDITION ON IMPACT RESISTANCE OF ORTHOPEDIC BONE CEMENT

2017 ◽  
Vol 17 (01) ◽  
pp. 1750019
Author(s):  
MARYAM KALANTARI ◽  
ATA HASHEMI
Keyword(s):  
Impact Strength ◽  
Bone Cement ◽  
Storage Temperature ◽  
Impact Resistance ◽  
Storage Condition ◽  
Four Point Bending ◽  
Pmma Bone Cement ◽  
Different Temperatures ◽  
Aging Conditions ◽  
The Impact

Antibiotic-impregnated poly(methyl methacrylate) (PMMA) bone cement has been successfully used to treat infected joint arthroplasties and surgeons have advocated the use of antibiotic-treated bone cement to prevent possible infections in joint replacement surgeries. However, there is a concern that this addition may adversely affect the mechanical properties of the bone cement. In most cases, the addition of antibiotics to bone cement has been reported to lower its mechanical strength. The uniaxial, biaxial and three/four point bending tests of antibiotic-impregnated bone cement have been extensively performed and well documented. However, only a few documents have focused on the impact strength of bone cement. The present study reports the impact tests of control and antibiotic loaded bone cements at different temperatures and aging conditions. According to the results, the addition of gentamicin or vancomycin significantly reduced the samples' impact strength. Moreover, the samples aged in saline at 23[Formula: see text]C were more resistant than the samples aged in air at 23[Formula: see text]C. Furthermore, raising the storage temperature from 23[Formula: see text]C to 37[Formula: see text]C significantly lowered the bone cement's impact strength in both control and antibiotic loaded samples.

Low Velocity Impact Resistance of Hybrid Woven Glass Fiber-Carbon Fiber/Vinyl Ester Composite Laminates

2012 ◽  
Vol 488-489 ◽  
pp. 501-505
Author(s):  
Zafarullah Khan
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Composite Laminates ◽  
Hybrid Composites ◽  
Impact Resistance ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Glass Fiber Composites ◽  
Woven Glass Fiber ◽  
The Impact

In recent years, for the purpose of achieving enhanced mechanical properties of fiber reinforced composites, hybridized composites containing a combination of two or more types of fiber reinforcements have been explored. Perhaps the main parameter which controls the mechanical properties of the hybrid composites is the flexibility to arrange the hybrid fiber reinforcement layers in a variety of ways within the hybrid laminate. In this study, low velocity drop weight impact resistance of plain weave woven glass and carbon hybrid composites has been investigated. The study explores the effects of intra-ply arrangement sequence on the impact resistance of 24 and 32 ply laminates in which glass and the carbon plies have been differently stacked. The results show that impact resistance of woven glass fiber composites can be enhanced by hybridizing woven glass fabrics with woven carbon fabrics. The results indicate that the impact resistance is a function of the positions of the glass and carbon layers in the hybridized inter ply laminates.

scholarly journals Flexural Toughness as an Attribute for Impact Damage Evaluation of Composite Laminates

2011 ◽  
Author(s):  
Mohammad Alemi-Ardakani ◽  
Abbas S. Milani ◽  
Spiro Yannacopoulos ◽  
David Trudel-Boucher ◽  
Golnaz Shokouhi
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Composite Laminates ◽  
Visual Inspection ◽  
Impact Damage ◽  
Impact Resistance ◽  
Damage Evaluation ◽  
Flexural Toughness ◽  
Post Impact ◽  
The Impact

Popularity and application of composite materials are increasing in several industries including transportation, construction and aerospace. The mechanical properties of these materials should be known to engineers to be able to design/select new products. Impact resistance is one of the properties which have been studied extensively over the past years and still is an ongoing topic in composites research. Since analytical solutions have not been fully developed for the impact characterization of anisotropic materials, researchers often perform mechanical testing in conjunction with visual inspection methods to investigate the impact behavior of composite materials. The present study shows that flexural toughness can be used as a parameter in the design/material selection stage in the evaluation of pre- and post-impact damage of composite laminates. A series of drop-weight impact tests, using a 200J energy level, were performed on specimens made of four different stacking configurations of TWINTEX® and unidirectional laminates (polypropylene and glass fiber commingled composites) according to ASTM D7136. The damaged areas of the impacted specimens were measured using image analysis. Four-point flexural testing was then carried out, based on ASTM D7264, on both non-impacted and impacted specimens. Damaged area and flexural toughness, along with a set of other commonly used mechanical properties, were selected as measures for damage evaluation. Comparison of results before and after impact and under different criteria showed that in the present case study, visual inspection is not sufficient in predicting the post-impact properties of the tested specimens and can be misleading. On the other hand, flexural toughness could give a much clearer perspective on the extent of post-impact resistance of the specimens.

An investigation on composite laminates including shear thickening fluid under stab condition

2018 ◽  
Vol 53 (8) ◽  
pp. 1111-1122 ◽  
Author(s):  
Selim Gürgen
Keyword(s):  
Energy Absorption ◽  
Composite Laminates ◽  
Impact Resistance ◽  
Shear Thickening ◽  
Low Velocity ◽  
Shear Thickening Fluid ◽  
Shear Thickening Fluids ◽  
Absorption Performance ◽  
Thickening Behavior ◽  
The Impact

Shear thickening fluids have been extensively utilized in composite laminate structures to enhance the impact resistance in the last decade. Despite the contribution of shear thickening fluids to the protective systems, the mechanism behind the energy absorption behavior of shear thickening fluids is not fully understood. In the present study, various configurations of composite laminates were prepared and these structures were investigated under low velocity stab conditions. Contrary to the common idea of shear thickening fluid impregnation for fabrics, shear thickening fluids were used in bulk form and by means of this, pure contribution of shear thickening behavior to the energy absorption was investigated. To hold the bulk shear thickening fluids in the composite laminates, Lantor Soric SF honeycomb layers were filled with shear thickening fluids and Twaron fabrics were plied in the structures as the reinforcement. As a result of this study, it is stated that shear thickening behavior is insufficient to effectively improve the energy absorption performance of composite laminates; however, shear thickening fluids are beneficial to fabric based composites because the inter-yarn friction of fabrics is enhanced using shear thickening fluids as an impregnation agent rather than a bulk form.

TEMPERATURE EFFECT OF LOW VELOCITY IMPACT RESISTANCE OF GLASS/EPOXY LAMINATES

2010 ◽  
Vol 24 (15n16) ◽  
pp. 2657-2663 ◽  
Author(s):  
KI-WEON KANG ◽  
HEUNG-SEOB KIM ◽  
TAE-JIN CHUNG ◽  
SEUNG-KEE KOH
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Testing Machine ◽  
Impact Resistance ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Effect Of Temperature ◽  
Low Velocity ◽  
Damage Resistance ◽  
The Impact

This paper aims to evaluate the effect of temperature on impact damage resistance of glass/epoxy laminates. A series of impact tests were performed using an instrumented impact-testing machine at temperature ranging from -40°C to +80°C. The resulting impact damage was measured using back light method. The impact resistance parameters were employed to understand the damage resistance. It was observed that temperature has a little effect on the impact responses of composite laminates. The damage resistance of glass/epoxy laminates is somewhat deteriorated at two opposite extremes of the studied temperature range and this behavior is likely due to the property change of glass/epoxy laminates under extreme temperatures

Sign in / Sign up

Export Citation Format

Share Document