The Leaching Behaviour of some Primary and Secondary Raw Materials Used in Pilot-Scale Road Bases

1991 ◽  
pp. 255-264 ◽  
Author(s):  
E. Mulder
Keyword(s):  
Raw Materials ◽  
Pilot Scale ◽  
Secondary Raw Materials ◽  
Leaching Behaviour ◽  
Materials Used ◽  
Road Bases

scholarly journals Study of production 500 kg/batch polyaluminum chloride from aluminum hydrate

2021 ◽  
Vol 882 (1) ◽  
pp. 012014
Author(s):  
H E Mamby ◽  
K N Hidayat ◽  
A Wahyudi
Keyword(s):  
Reaction Time ◽  
Acid Concentration ◽  
Raw Materials ◽  
Pilot Scale ◽  
Suspended Solid ◽  
Total Acid ◽  
Hydrated Alumina ◽  
Polyaluminum Chloride ◽  
Aluminum Ions ◽  
Materials Used

Abstract Polyaluminum chloride (PAC) is commonly used as a chemical in the water treatment industry, deodorant and paper-making. The PAC is a complex inorganic substance between hydroxyl and aluminum ions that gradually takes place chlorination with its general formula of Alx(OH)yCl3x-y. It has the ability to coagulate suspended solid or dispersed colloid within water perform easily precipitated flock. The raw materials used for manufacturing liquid PAC consists of hydrated alumina (Al(OH)3), hydrochloric acid (HCl), sulfuric acid (H2SO4) and calcium carbonate (CaCO3). A pilot-scale experiment with a capacity of 500 kg/batch feed was conducted by reacting Al(OH)3 with HCl and H2SO4, then neutralized using CaCO3 to obtain liquid PAC and gypsum as a by-product. The variation of acid concentration as reactant and reaction time were conducted to determine its effect on the composition of PAC and the amount of gypsum produced. The optimum experiment produced liquid PAC with the highest Al2O3 composition of 11.96% and the lowest Cl− ion of 10.87% at 2 hours reaction time with a total acid concentration of 37.74%.

The Influence of the Addition of Secondary Materials to the Thermal-Technical Properties of Filling Materials

2013 ◽  
Vol 688 ◽  
pp. 165-171
Author(s):  
Šárka Keprdová ◽  
Jiří Bydžovský ◽  
Klára Křížová
Keyword(s):  
Raw Materials ◽  
Filling Material ◽  
Technical Parameters ◽  
Secondary Raw Materials ◽  
Filling Materials ◽  
Thermal Insulating ◽  
Technical Properties ◽  
Materials Used ◽  
Wooden Structures ◽  
Insulating Properties

The filling material is made up of technical Cannabis shives, hydraulic or air binders and other components. They are suitable for use as fillers in horizontal or vertical wooden structures such as rack systems. Thanks to its good thermal-insulating properties the filler may be used as thermal insulating filler in walls or floors. The article describes the behaviour of Cannabis padding materials used as secondary raw materials as the replacement part of the joiner component. The use of secondary raw materials (such as fly ash, fluid or classical slag), however, is conditioned by the maintenance of the same, or at least the best possible thermal-technical parameters of the resulting filling material.

Verification of the Possibility of the Use of Secondary Raw Materials of Tubular Solar Panels as Fillers of Polymer Industrial Floors

2015 ◽  
Vol 729 ◽  
pp. 58-63
Author(s):  
Jana Hodná ◽  
Vit Petranek ◽  
Bozena Dohnalkova
Keyword(s):  
Czech Republic ◽  
Raw Materials ◽  
Solar Panel ◽  
Polymer Materials ◽  
Solar Panels ◽  
The Czech Republic ◽  
Secondary Raw Materials ◽  
University Of Technology ◽  
Materials Used ◽  
Secondary Materials

The article reports on a hot topic over the last few years and the issue of recycling and further use of secondary raw materials from the solar panels. Recycling of solar panels is very difficult and complicated. Secondary materials that recycling generated so far have not found a application and their using is still not fully resolved. The research conducted on Brno University of Technology, Faculty of Civil Engineering (BUT) now being developed polymer materials used for industrial floors. These materials were incorporated secondary materials as fillers. It was thus replaced by a filler made from natural materials, which the Czech Republic is still declining. In the following text, which builds on earlier publications describe the procedures and results of new tests, which were conducted on these fuels, which confirms the possibility of the use of glass from solar panel in industrial polymer flooring systems.

SIFAT MEKANIK PAPAN GYPSUM DARI SERBUK LIMBAH KAYU NON KOMERSIAL

2014 ◽  
Vol 6 (2) ◽  
pp. 1
Author(s):  
Saibatul Hamdi
Keyword(s):  
Raw Materials ◽  
Wood Particle ◽  
Quality Standards ◽  
Gypsum Board ◽  
Average Value ◽  
Wood Particles ◽  
Sawn Timber ◽  
Materials Used ◽  
Artocarpus Elasticus ◽  
Ficus Glomerata

The purpose of this research is to know the mechanical strength of gypsum board by utilizing waste sawn wood. Raw materials used consist of flour, gypsum,wood particles, boraks and kambang (Goniothalamus sp), wood tarap (Artocarpus elasticus REINW) and lua (Ficus glomerata ROXB). Wood particle 40 mesh and 60 mesh, concentrations boraks of 1 and 2 and the percentage particles of gypsum sawn timber is 300, 400 and 500%. The results showed that the average value Modulus of Rufture (MoR) in lua wood ranges from 12.55 – 14,47 kgcm2, wood kambang 25.10-31,11 kgcm2 and wood tarap 19.20- 24,18 kgcm2. As for Modulus of Elasticity (MoE) on the lua 1129,80- 2092,70 kgcm2, wood kambang 2512,37-3971,32 kgcm2 and tarap 2050,63-2691,09 kgcm2. Gypsum board are mechanical properties do not meet quality standards created SNI 03-6434-2000.Keywords: sawdust, lua, kambang, tarap, gypsum, mechanical

COMPARATIVE ANALYSIS OF BIOACTIVE SUBSTANCES CONTENT IN THE LEAVES AND FRUITS OF A ROWAN-TREE (SORBUS AUCUPARIA FRUCTUS) AND ASSESSMENT OF PROSPECTS IN MEDICINE AND PHARMACY

2020 ◽  
pp. 58-62
Author(s):  
Chernichkina A.D.
Keyword(s):  
Raw Materials ◽  
Wide Distribution ◽  
Biologically Active ◽  
Bioactive Substances ◽  
Plant Raw Materials ◽  
Mountain Ash ◽  
The Russian Federation ◽  
Materials Used ◽  
Active Substances ◽  
Pectin Substances

A large number of biologically active substances, organic acids, tannins, and pectin substances were detected during the study of fruits, leaves, and pulp of the fruits of mountain Ash. The content of these substances in leaves and pulp will significantly expand the arsenal of medicinal plant raw materials used. Given the wide distribution of mountain Ash in the territory of the Russian Federation, harvesting leaves from the same plants after harvesting the fruit and using pulp will make it possible to obtain new phytopreparations.

Mutual Influence Study of Food Acids and Polysaccharides of Different Nature on the Sensory Perception of Low-Calorie Sweet Dishes

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 71-78
Author(s):  
Ekaterina Minnikhanova ◽  
Nataliya Zavorokhina ◽  
Anna Gilina
Keyword(s):  
Mutual Influence ◽  
Raw Materials ◽  
Sucrose Solution ◽  
Complex Mixture ◽  
The Body ◽  
Sensory Characteristics ◽  
Apple Pectin ◽  
Low Calorie ◽  
Functional Reserves ◽  
Materials Used

Abstract The inclusion of polysaccharide thickeners in the recipes of sweet dishes increases the functional reserves of the body, contributes to the preservation of health and the prevention of diseases. The purpose of the research is to study the sensory characteristics of polysaccharides of various nature when combined with food acids, to develop a recipe for a basic mixture of low-calorie meals for public catering. The authors analyzed citric, lactic and succinic acids in combinations with polysaccharides of various nature. Organoleptic tests were evaluated by a touch panel. The organization of the tasting analysis corresponded to GOST ISO 6658-2016; the consistency was determined according to GOST 31986-2012, GOST ISO 11036-2017, GOST ISO 8588-2011. The optimal organoleptic combinations of the presented food acids and complex additives of sweeteners (CDP) were identified, which included aspartame, sodium saccharinate, Sucralose, sweetness coefficient – 340: the mixture with citric acid had a long pleasant aftertaste without foreign tastes and the best taste characteristics. Using the “A-not A” method, we found that the sample with the addition of CDP is identical to the sucrose solution. In the second part of the study, polysaccharides were added to model samples of acids with complex sweeteners; the best sensory characteristics were obtained by model samples consisting of a mixture of low-esterified Apple pectin with lactic acid and KDP. The technology of obtaining a stable elastic jelly using low-esterified Apple pectin has been developed, since the complex mixture of sweeteners and food acids does not have a dehydrating effect. Developed a dry mix recipe that can serve as a basic development, low-calorie sweet products for catering and has a variance of use of lactic and succinic acids, depending on the flavor characteristics of the raw materials used and its corrective ability.

DAMPAK SUBSITUSI IMPORT TERHADAP DEFISIT NERACA PERDAGANGAN: STUDI KASUS IMPOR KULIT INDONESIA

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Ivan Yulianto ◽  
Ario Seno Nugroho
Keyword(s):  
General Equilibrium ◽  
Foreign Exchange ◽  
Computable General Equilibrium ◽  
Trade Balance ◽  
Raw Materials ◽  
Import Substitution ◽  
Leather Industry ◽  
Materials Used ◽  
Net Export ◽  
Balance Deficit

An alternative strategy to reduce the trade balance deficit simultaneously to increase the net foreign exchange is the import-substitution for raw materials used to produce an export goods. This paper proposes an import substitution study on footwear products that have a dependency on imported raw materials by 70 percent, with the largest composition being leather raw materials by 67 percent. This paper analyzes the relationship between subsidies on the leather industry to leather import-substitution, multiplier effect to footwear sector, and Indonesia trade balance. Author make use of simulation the on Input-Output 2010 table and Computable General Equilibrium (CGE) Model. The simulation shows 100 billion subsidies on the leather sector, lead for the substitution-import of leather by 7,94 million rupiah, increase the net export foreign exchange by 1.1 billion rupiah of the footwear sector, and for overall, increase Indonesia trade balance deficit by 68 billion rupiah. Keywords: Computable General Equilibrium, footwear, leather, net foreign exchange, subsidy.ABSTRAK: Salah satu terobosan untuk mengurangi defisit neraca perdagangan dan meningkatkan nilai neto devisa ekspor adalah dengan substitusi impor bahan baku yang digunakan untuk memproduksi barang ekspor. Paper ini mengusulkan kajian substitusi impor pada produk alas kaki yang mempunyai ketergantungan bahan baku impornya sebesar 70 persen, dengan komposisi terbesar adalah bahan baku kulit sebesar 67 persen. Tujuan penelitian ini adalah untuk mengetahui dampak stimulus subsidi pada industri kulit terhadap subtitusi impor kulit, dukungan multiplier sektor kulit terhadap sektor alas kaki, serta terhadap devisa ekspor Indonesia. Penelitian ini menggunakan simulasi model Computable General Equilibrium (CGE). Hasil simulasi menunjukkan stimulus subsidi sebesar 100 milyar rupiah pada sektor kulit memberikan substitusi bahan baku kulit sebesar 7,94 juta rupiah, menaikkan devisa ekspor sektor alas kaki sebesar 1.1 miliar rupiah, serta secara keseluruhan menambah defisit neraca berjalan Indonesia sebesar 68 miliar rupiah. Kata kunci: alas kaki, Computable General Equilibrium (CGE), devisa ekspor, kulit, subsidi.

New surface treatment techniques to minimize copper alloy leaching in drinking water

2012 ◽  
Vol 7 (4) ◽  
Author(s):  
Norikazu Sugaya
Keyword(s):  
Surface Treatment ◽  
Raw Materials ◽  
Organic Film ◽  
Forming Process ◽  
Mixed Acid ◽  
Treatment Techniques ◽  
Acid Washing ◽  
Washing Process ◽  
Film Forming ◽  
Materials Used

This new surface treatment is simple and easy as well as low in cost. The processes can even be performed by hand. Pharmaceutical raw materials used for the surface treatment, such as hydrochloric acid and nitric acid used in a mixed acid washing process and vegetable oil used in an organic film forming process, are easily obtained in many countries.

Sign in / Sign up

Export Citation Format

Share Document