Key Factors Affecting the Development of Oxidative Desulfurization of Liquid Fuels: A Critical Review

Author(s):  
Fatemeh Boshagh ◽  
Mohammad Rahmani ◽  
Khosrow Rostami ◽  
Mohsen Yousefifar
2011 ◽  
Vol 76 (12) ◽  
pp. 1595-1605 ◽  
Author(s):  
Han Wang ◽  
Rui Wang

Clean fuel and clean production technologies, including desulfurization, have become a subject of concern in environmental catalysis studies. One of the most promising desulfurization processes is oxidative desulfurization combined with extraction. Keggin-type heteropoly acids encaged Y-type zeolite were studied as promising catalytic agents for the oxidation of dibenzothiophene with hydrogen peroxide in a normal octane/acetonitrile biphasic system. The key factors affecting the reaction, including the catalyst amount, O/S molar ratio and contact time between oxidant and catalyst, were investigated. The conditions favourable to the reaction were also determined. Moreover, the reused encaged type catalyst exhibited good catalytic activity in recovery experiments and can be effectively applied to diesel oil.


2020 ◽  
Vol 36 (7) ◽  
pp. 831-858 ◽  
Author(s):  
Majid Taghizadeh ◽  
Elaheh Mehrvarz ◽  
Amirhossein Taghipour

AbstractIn order to meet the stringent environmental and industrial legislation on fuel specifications, sulfur compounds have to be removed efficiently from fuels. The requirement to produce ultralow-sulfur fuels (S < 10 ppm) has stimulated many works in the area of conventional hydro-desulfurization (HDS) method. Oxidative desulfurization (ODS), as an alternative or complementary technology to HDS for deep desulfurization, is conducted with high selectivity and reactivity to sterically hindered S compounds under mild reaction conditions. In the ODS process, using an appropriate oxidant in the presence of a catalyst, organic sulfur compounds can be oxidized selectively to their corresponding sulfoxides and sulfones, which can be easily removed by different separation methods. Having great catalytic characteristics, polyoxometalate materials have been utilized as a vital class of catalysts for deep desulfurization of fuels. In the past few decades, ODS of fuels using polyoxometalate as catalyst has drawn much attention, and various studies have been carried out in this area. Here, we give a critical review for the removal of sulfur compounds from liquid fuels (mostly from diesel and model fuels) by ODS via homogeneous and heterogeneous polyoxometalate catalysts.


Author(s):  
Elena Evgenevna Mashyanova ◽  
Elena Aleksandrovna Smirnova

In modern conditions of development, financial security is an integral part of the overall security of the region and is formed on the basis of the functioning of the financial system. The complication of relationships between key segments of international financial markets, as well as the limited ability to accurately predict future trends in the development of the global financial system, lead to a gradual increase in the risks that accompany the activities of economic entities, and an increase in the number and scale of internal and external threats that have a negative impact on the financial security of the state. This formulation of the issue requires generalization of approaches to determining the financial security of the region in order to further formalize this issue and determine the key factors affecting it. The article considers the types of financial security, as well as certain areas of ensuring the financial security of the region and their priority. In work the assessment of the level of socio-economic development of the region with a view to ensuring financial security on the basis of which offers the main activities and priority areas of implementation of the investment policy that will ensure financial security of the Republic of Crimea.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yufang Xiang ◽  
Yuanyuan Zheng ◽  
Shaobo Liu ◽  
Gang Liu ◽  
Zhi Li ◽  
...  

AbstractWestern blotting (WB) is one of the most widely used techniques to identify proteins as well as post translational modifications of proteins. The selection of electroblotted membrane is one of the key factors affecting the detection sensitivity of the protein which is transferred from gel to membrane in WB. The most common used membranes are polyvinylidene fluoride (PVDF) and nitrocellulose (NC) membranes. Which membrane of these two is more suitable for WB has not been reported so far. Here, by incubating proteins which were transferred to PVDF or NC membranes with a series of antibodies and different types of lectins, we investigated the relationship between the binding ability of these two membranes to proteins or glycoproteins and the molecular weight of the target protein. The antibody re-probed ability of the two membranes was also explored. Moreover, we verified the above results by directly incubating proteins having different molecular weights onto PVDF or NC membranes. Bound proteins were stained with direct blue-71, and the staining intensity was quantitated by scanning and densitometry.


2021 ◽  
Vol 13 (4) ◽  
pp. 1962
Author(s):  
Timo Liljamo ◽  
Heikki Liimatainen ◽  
Markus Pöllänen ◽  
Riku Viri

Car ownership is one of the key factors affecting travel behaviour and thus also essential in terms of sustainable mobility. This study examines car ownership and how people’s willingness to own a car may change in the future, when considering the effects of public transport, Mobility as a Service (MaaS) and automated vehicles (AVs). Results of two citizen surveys conducted with representative samples (NAV-survey = 2036; NMaaS-survey = 1176) of Finns aged 18–64 are presented. The results show that 39% of respondents would not want or need to own a car if public transport connections were good enough, 58% if the described mobility service was available and 65% if all vehicles in traffic were automated. Hence, car ownership can decrease as a result of the implementation of AVs and MaaS, and higher public transport quality of service. Current mobility behaviour has a strong correlation to car ownership, as respondents who use public transport frequently feel less of a will or need to own a car than others. Generally, women and younger people feel less of a will or need to own a car, but factors such as educational level and residential location seem to have a relatively low effect.


Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 474
Author(s):  
Huaqiao Liu ◽  
Yiren Pan ◽  
Huiguang Bian ◽  
Chuansheng Wang

In this study, the two key factors affecting the thermal performance of the insert rubber and stress distribution on the tire sidewall were analyzed extensively through various performance tests and simulations to promote the development of run-flat tires. Four compounds and two structures of insert rubber were designed to investigate the effects of heat accumulation and stress distribution on durability testing at zero pressure. It was concluded that the rigidity and tensile strength of the compound were negatively correlated with temperature. The deformation was a key factor that affects energy loss, which could not be judged solely by the loss factor. The stress distribution, however, should be considered in order to avoid early damage of the tire caused by stress concentration. On the whole, the careful balance of mechanical strength, energy loss, and structural rigidity was the key to the optimal development of run-flat tires. More importantly, the successful implementation of the simulations in the study provided important and useful guidance for run-flat tire development.


2019 ◽  
Vol 946 ◽  
pp. 380-385
Author(s):  
Boris A. Chaplygin ◽  
Viacheslav V. Shirokov ◽  
Tat'yana A. Lisovskaya ◽  
Roman A. Lisovskiy

The strength of abrasive wheels is one of the key factors affecting the performance of abrasive machining. The paper discusses ways to improve the strength of abrasive wheels. The stress-state mathematical model presented herein is a generalization of the existing models. It is used herein to find for the first time that there are numerous optimal combinations of the elastic modulus and reinforcing material density, which result in the same minimum value of the objective function. It is found out that increasing the radius of the reinforcing component while also optimizing the mechanical properties of its material may increase the permissible breaking speed of the wheel several times. We herein present a regression equation and a nomogram for finding the optimal combination of control factors. Conventional methods for testing the mechanical properties of materials, which have been proven reliable for testing metals and alloys, are not as reliable for testing abrasive materials, as the test results they generate are not sufficiently stable or accurate. We therefore propose an alternative method that does not require any special equipment or special studies.


Sign in / Sign up

Export Citation Format

Share Document