The Aging of Wool Fibers

Author(s):  
Ian L. Weatherall
Keyword(s):  
Author(s):  
Leo Barish

Although most of the wool used today consists of fine, unmedullated down-type fibers, a great deal of coarse wool is used for carpets, tweeds, industrial fabrics, etc. Besides the obvious diameter difference, coarse wool fibers are often medullated.Medullation may be easily observed using bright field light microscopy. Fig. 1A shows a typical fine diameter nonmedullated wool fiber, Fig. IB illustrates a coarse fiber with a large medulla. The opacity of the medulla is due to the inability of the mounting media to penetrate to the center of the fiber leaving air pockets. Fig. 1C shows an even thicker fiber with a very large medulla and with very thin skin. This type of wool is called “Kemp”, is shed annually or more often, and corresponds to guard hair in fur-bearing animals.


2020 ◽  
Author(s):  
Israa Bu Najmah ◽  
Nicholas Lundquist ◽  
Melissa K. Stanfield ◽  
Filip Stojcevski ◽  
Jonathan A. Campbell ◽  
...  

An insulating composite was made from the sustainable building blocks wool, sulfur, and canola oil. In the first stage of the synthesis, inverse vulcanization was used to make a polysulfide polymer from the canola oil triglyceride and sulfur. This polymerization benefits from complete atom economy. In the second stage, the powdered polymer is mixed with wool, coating the fibers through electrostatic attraction. The polymer and wool mixture is then compressed with mild heating to provoke S-S metathesis in the polymer, which locks the wool in the polymer matrix. The wool fibers impart tensile strength, insulating properties, and flame resistance to the composite. All building blocks are sustainable or derived from waste and the composite is a promising lead on next-generation insulation for energy conservation.


2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Chunhua Zhang ◽  
Liangjun Xia ◽  
Jiajing Zhang ◽  
Xin Liu ◽  
Weilin Xu
Keyword(s):  

2021 ◽  
Vol 16 ◽  
pp. 155892502110050
Author(s):  
Junli Luo ◽  
Kai Lu ◽  
Yueqi Zhong ◽  
Boping Zhang ◽  
Huizhu Lv

Wool fiber and cashmere fiber are similar in physical and morphological characteristics. Thus, the identification of these two fibers has always been a challenging proposition. This study identifies five kinds of cashmere and wool fibers using a convolutional neural network model. To this end, image preprocessing was first performed. Then, following the VGGNet model, a convolutional neural network with 13 weight layers was established. A dataset with 50,000 fiber images was prepared for training and testing this newly established model. In the classification layer of the model, softmax regression was used to calculate the probability value of the input fiber image for each category, and the category with the highest probability value was selected as the prediction category of the fiber. In this experiment, the total identification accuracy of samples in the test set is close to 93%. Among these five fibers, Mongolian brown cashmere has the highest identification accuracy, reaching 99.7%. The identification accuracy of Chinese white cashmere is the lowest at 86.4%. Experimental results show that our model is an effective approach to the identification of multi-classification fiber.


Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2523
Author(s):  
Franciszek Pawlak ◽  
Miguel Aldas ◽  
Francisco Parres ◽  
Juan López-Martínez ◽  
Marina Patricia Arrieta

Poly(lactic acid) (PLA) was plasticized with maleinized linseed oil (MLO) and further reinforced with sheep wool fibers recovered from the dairy industry. The wool fibers were firstly functionalized with 1 and 2.5 phr of tris(2-methoxyethoxy)(vinyl) (TVS) silane coupling agent and were further used in 1, 5, and 10 phr to reinforce the PLA/MLO matrix. Then, the composite materials were processed by extrusion, followed by injection-molding processes. The mechanical, thermal, microstructural, and surface properties were assessed. While the addition of untreated wool fibers to the plasticized PLA/MLO matrix caused a general decrease in the mechanical properties, the TVS treatment was able to slightly compensate for such mechanical losses. Additionally, a shift in cold crystallization and a decrease in the degree of crystallization were observed due to the fiber silane modification. The microstructural analysis confirmed enhanced interaction between silane-modified fibers and the polymeric matrix. The inclusion of the fiber into the PLA/MLO matrix made the obtained material more hydrophobic, while the yellowish color of the material increased with the fiber content.


Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4141
Author(s):  
Tingting Wang ◽  
Wangbingfei Chen ◽  
Tingting Dong ◽  
Zihao Lv ◽  
Siming Zheng ◽  
...  

Towards the goal of developing scalable, economical and effective antimicrobial textiles to reduce infection transmission, here we prepared color-variable photodynamic materials comprised of photosensitizer (PS)-loaded wool/acrylic (W/A) blends. Wool fibers in the W/A blended fabrics were loaded with the photosensitizer rose bengal (RB), and the acrylic fibers were dyed with a variety of traditional cationic dyes (cationic yellow, cationic blue and cationic red) to broaden their color range. Investigations on the colorimetric and photodynamic properties of a series of these materials were implemented through CIELab evaluation, as well as photooxidation and antibacterial studies. Generally, the photodynamic efficacy of these dual-dyed fabrics was impacted by both the choice, and how much of the traditional cationic dye was employed in the dyeing of the W/A fabrics. When compared with the PS-only singly-dyed material, RB-W/A, that showed a 99.97% (3.5 log units; p = 0.02) reduction of Staphylococcus aureus under visible light illumination (λ ≥ 420 nm, 60 min), the addition of cationic dyes led to a slight decrease in the photoinactivation ability of the dual-dyed fabrics, but was still able to achieve a 99.3% inactivation of S. aureus. Overall, our findings demonstrate the feasibility and potential applications of low cost and color variable RB-loaded W/A blended fabrics as effective self-disinfecting textiles against pathogen transmission.


1984 ◽  
Vol 54 (6) ◽  
pp. 397-402 ◽  
Author(s):  
Hiraku Ito ◽  
Hiroshi Sakabe ◽  
Takeaki Miyamoto ◽  
Hiroshi Inagaki
Keyword(s):  

2011 ◽  
Vol 331 ◽  
pp. 377-381 ◽  
Author(s):  
Xue Mei He ◽  
Kong Liang Xie

In this study, wool fabrics were treated with different concentration of chitosan sulfamic acid solution under using 3-glycidyloxypropyltrimethoxysilane (GPTMS) as a crosslinking agent. The structure of treated wool fabrics was investigated by SEM, DSC-TG. Treated wool fibers had a irregular surface appearance, showed the presence of amounts of Nano SiO2 and their aggregates deposited onto surface of wool fibers. The thermal properties were obviously enhanced. Treated wool fabrics is more stable in higher temperature than that of untreatment. Treated wool fabrics were dyed with weak acid red B, and dyeing behaviour were studied by means of by light reflectance measurements. The color strength (K/S value) of treated wool fabrics obviousily increased from 5.33 to 31.68 by comparison with the untreatment. As a result, it can be concluded that the chitosan sulfamic acid solution with GPTMS treatment could improve the weak acid red B low temperature dyeing on wool. Further, low temperature dyeing of wool fabrics with chitosan-sulfamic acid is safe, so the results obtained are quite promising as a basis for possible future industrial application.


Sign in / Sign up

Export Citation Format

Share Document