scholarly journals Artificially innervated self-healing foams as synthetic piezo-impedance sensor skins

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Hongchen Guo ◽  
Yu Jun Tan ◽  
Ge Chen ◽  
Zifeng Wang ◽  
Glenys Jocelin Susanto ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Mechanical Damage ◽  
Contact Forces ◽  
Self Healing ◽  
Foam Material ◽  
Foaming Process ◽  
Low Modulus ◽  
One Step ◽  
Immediate Function ◽  
Impedance Sensor

AbstractHuman skin is a self-healing mechanosensory system that detects various mechanical contact forces efficiently through three-dimensional innervations. Here, we propose a biomimetic artificially innervated foam by embedding three-dimensional electrodes within a new low-modulus self-healing foam material. The foam material is synthesized from a one-step self-foaming process. By tuning the concentration of conductive metal particles in the foam at near-percolation, we demonstrate that it can operate as a piezo-impedance sensor in both piezoresistive and piezocapacitive sensing modes without the need for an encapsulation layer. The sensor is sensitive to an object’s contact force directions as well as to human proximity. Moreover, the foam material self-heals autonomously with immediate function restoration despite mechanical damage. It further recovers from mechanical bifurcations with gentle heating (70 °C). We anticipate that this material will be useful as damage robust human-machine interfaces.

scholarly journals Correction: One-step coelectrodeposition-assisted layer-by-layer assembly of gold nanoparticles and reduced graphene oxide and its self-healing three-dimensional nanohybrid for an ultrasensitive DNA sensor

Nanoscale ◽  
2018 ◽  
Vol 10 (5) ◽  
pp. 2658-2658 ◽  
Author(s):  
Kumarasamy Jayakumar ◽  
María Belén Camarada ◽  
Venkataraman Dharuman ◽  
Huangxian Ju ◽  
Ramendra Sundar Dey ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Self Healing ◽  
Dna Sensor ◽  
Reduced Graphene ◽  
One Step ◽  
Layer Assembly

Correction for ‘One-step coelectrodeposition-assisted layer-by-layer assembly of gold nanoparticles and reduced graphene oxide and its self-healing three-dimensional nanohybrid for an ultrasensitive DNA sensor’ by Jayakumar Kumarasamy, et al., Nanoscale, 2018, DOI: 10.1039/c7nr06952a.

One-step coelectrodeposition-assisted layer-by-layer assembly of gold nanoparticles and reduced graphene oxide and its self-healing three-dimensional nanohybrid for an ultrasensitive DNA sensor

Nanoscale ◽  
2018 ◽  
Vol 10 (3) ◽  
pp. 1196-1206 ◽  
Author(s):  
Jayakumar Kumarasamy ◽  
María Belén Camarada ◽  
Dharuman Venkatraman ◽  
Huangxian Ju ◽  
Ramendra Sundar Dey ◽  
...  
Keyword(s):  
Thin Films ◽  
Three Dimensional ◽  
Multilayer Thin Films ◽  
Layer By Layer ◽  
Self Healing ◽  
Dna Sensor ◽  
Layer By Layer Assembly ◽  
Reduced Graphene ◽  
One Step ◽  
Layer Assembly

One-step coelectrodeposition-assisted layer-by-layer assembly was employed for preparing multilayer thin films with a controlled three-dimensional nanoarchitecture and application in an ultrasensitive DNA biosensor.

Controllable Electrochemical Synthesis of Ag Hierarchical Micro/Nanostructures with High SERS-Activity

NANO ◽  
2020 ◽  
Vol 15 (04) ◽  
pp. 2050043
Author(s):  
Huayu Zhou ◽  
Jingjing Wang ◽  
Qiong Yang ◽  
Menglei Chen ◽  
Changsheng Song ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Current System ◽  
Three Dimensional ◽  
Constant Current ◽  
Localized Surface Plasmon ◽  
Excitation Wavelength ◽  
Raman Signal ◽  
Mixed Solution ◽  
Raman Enhancement ◽  
One Step

We report a one-step electrochemical deposition technique to prepare three-dimensional (3D) Ag hierarchical micro/nanostructured film consisting of well-crystallized Ag nanosheets grown on an indium tin oxide (ITO) conductive substrate. The Ag hierarchical micro/nanostructures were fabricated in the mixed solution of AgNO3 and sodium citrate in a constant current system at room temperature. Through reduction of Ag[Formula: see text] electrodeposited on the surface of ITO substrate, nanoparticles were grown to form nanosheets which further combined into 3D sphere-like microstructures. The 3D Ag micro/nanostructures have many sharp edges and nanoscale gaps which can give rise to good Raman-enhanced effect. Due to localized surface plasmon resonance (LSPR) effects, these special Ag micro/nanostructures exhibited good Raman-enhanced performance. Using Rhodamine 6G (R6G) molecules as probe molecule, we studied the influence of excitation wavelength on Raman enhancement. The results showed that the 532[Formula: see text]nm excitation wavelength is the best to obtain the strongest Raman signal and to reduce the influence of other impurity peaks. Using the as-synthesized Ag hierarchical micro/nanostructures, we can detect the 10[Formula: see text][Formula: see text]mol/L R6G aqueous solution, exhibiting great Raman-enhanced effect.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

A Self‐Healing Volume Variation Three‐Dimensional Continuous Bulk Porous Bismuth for Ultrafast Sodium Storage

2021 ◽  
pp. 2011264
Author(s):  
Xiaolong Cheng ◽  
Ruiwen Shao ◽  
Dongjun Li ◽  
Hai Yang ◽  
Ying Wu ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Self Healing ◽  
Volume Variation ◽  
Sodium Storage

A Nonlinear Rail Vehicle Dynamics Computer Program SAMS/Rail: Part 1—Theory and Formulations

2009 ◽  
Author(s):  
Khaled E. Zaazaa ◽  
Brian Whitten ◽  
Brian Marquis ◽  
Erik Curtis ◽  
Magdy El-Sibaie ◽  
...  
Keyword(s):  
High Speed ◽  
Dynamic Performance ◽  
Three Dimensional ◽  
Contact Element ◽  
Contact Forces ◽  
Simulation Code ◽  
Vehicle Performance ◽  
Normal Contact ◽  
Advantages And Disadvantages ◽  
High Speed Trains

Accurate prediction of railroad vehicle performance requires detailed formulations of wheel-rail contact models. In the past, most dynamic simulation tools used an offline wheel-rail contact element based on look-up tables that are used by the main simulation solver. Nowadays, the use of an online nonlinear three-dimensional wheel-rail contact element is necessary in order to accurately predict the dynamic performance of high speed trains. Recently, the Federal Railroad Administration, Office of Research and Development has sponsored a project to develop a general multibody simulation code that uses an online nonlinear three-dimensional wheel-rail contact element to predict the contact forces between wheel and rail. In this paper, several nonlinear wheel-rail contact formulations are presented, each using the online three-dimensional approach. The methods presented are divided into two contact approaches. In the first Constraint Approach, the wheel is assumed to remain in contact with the rail. In this approach, the normal contact forces are determined by using the technique of Lagrange multipliers. In the second Elastic Approach, wheel/rail separation and penetration are allowed, and the normal contact forces are determined by using Hertz’s Theory. The advantages and disadvantages of each method are presented in this paper. In addition, this paper discusses future developments and improvements for the multibody system code. Some of these improvements are currently being implemented by the University of Illinois at Chicago (UIC). In the accompanying “Part 2” and “Part 3” to this paper, numerical examples are presented in order to demonstrate the results obtained from this research.

Numerical Modeling of Tube Hydropiercing Using Phenomenological and Micro-Mechanical Damage Criteria

2013 ◽  
Vol 549 ◽  
pp. 172-179 ◽  
Author(s):  
Amir Hassannejadasl ◽  
Daniel E. Green
Keyword(s):  
Experimental Studies ◽  
Three Dimensional ◽  
Equivalent Plastic Strain ◽  
Mechanical Damage ◽  
High Strength ◽  
Dimensional Finite Element ◽  
Steel Dp600 ◽  
Three Dimensional Finite Element ◽  
Jc Model ◽  
Damage Criteria

Hydropiercing is an efficient way of piercing holes in mass produced hydroformed parts with complex geometries. By driving piercing punches radially into a hydroformed and fully pressurized tube, holes will be pierced and extruded into the tube-wall. Recent experimental studies have shown that the formability of advanced high strength steel (AHSS) tubes can be increased with the application of internal pressure. In this study, three-dimensional finite element simulations of a tube hydropiercing process of a dual phase steel (DP600) were performed in LS-DYNA, using phenomenological, micromechanical and combined damage criteria. Damage was included in the numerical analysis by applying constant equivalent plastic strain (CEPS), the Gurson-Tvergaard-Needleman (GTN), and the Extended GTN (GTN+JC) model. In order to calibrate the parameters in each model, a specialized hole-piercing fixture was designed and piercing tests were carried out on non-pressurized tube specimens. Of the various ductile fracture criteria, the results predicted with the GTN+JC model, such as the punch load-displacement, the roll-over depth, and the quality of the clearance zone correlated the best with the experimental data.

Three-dimensional graphene/polyimide composite-derived flexible high-performance organic cathode for rechargeable lithium and sodium batteries

2017 ◽  
Vol 5 (6) ◽  
pp. 2710-2716 ◽  
Author(s):  
Yanshan Huang ◽  
Ke Li ◽  
Jingjing Liu ◽  
Xing Zhong ◽  
Xiangfeng Duan ◽  
...  
Keyword(s):  
High Performance ◽  
Three Dimensional ◽  
3D Graphene ◽  
Sodium Batteries ◽  
One Step

A 3D graphene/polyimide composite is fabricated by a one-step solvothermal strategy as a high-performance cathode for both rechargeable lithium and sodium batteries.

Sign in / Sign up

Export Citation Format

Share Document