scholarly journals A synthetic building operation dataset

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Han Li ◽  
Zhe Wang ◽  
Tianzhen Hong
Keyword(s):  
San Francisco ◽  
Policy Development ◽  
Environmental Parameters ◽  
Control Policy ◽  
Building Energy ◽  
Operating Conditions ◽  
Weather Data ◽  
Load Prediction ◽  
Load Shape ◽  
Building Operation

AbstractThis paper presents a synthetic building operation dataset which includes HVAC, lighting, miscellaneous electric loads (MELs) system operating conditions, occupant counts, environmental parameters, end-use and whole-building energy consumptions at 10-minute intervals. The data is created with 1395 annual simulations using the U.S. DOE detailed medium-sized reference office building, and 30 years’ historical weather data in three typical climates including Miami, San Francisco, and Chicago. Three energy efficiency levels of the building and systems are considered. Assumptions regarding occupant movements, occupants’ diverse temperature preferences, lighting, and MELs are adopted to reflect realistic building operations. A semantic building metadata schema - BRICK, is used to store the building metadata. The dataset is saved in a 1.2 TB of compressed HDF5 file. This dataset can be used in various applications, including building energy and load shape benchmarking, energy model calibration, evaluation of occupant and weather variability and their influences on building performance, algorithm development and testing for thermal and energy load prediction, model predictive control, policy development for reinforcement learning based building controls.

scholarly journals Utilising Open Geospatial Data to Refine Weather Variables for Building Energy Performance Evaluation—Incident Solar Radiation and Wind-Driven Infiltration Modelling

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 802
Author(s):  
Kristian Skeie ◽  
Arild Gustavsen
Keyword(s):  
Solar Radiation ◽  
Web Service ◽  
Meteorological Data ◽  
Surface Wind ◽  
Building Energy ◽  
Energy Performance ◽  
Geospatial Data ◽  
Weather Data ◽  
Building Site ◽  
Incident Solar Radiation

In building thermal energy characterisation, the relevance of proper modelling of the effects caused by solar radiation, temperature and wind is seen as a critical factor. Open geospatial datasets are growing in diversity, easing access to meteorological data and other relevant information that can be used for building energy modelling. However, the application of geospatial techniques combining multiple open datasets is not yet common in the often scripted workflows of data-driven building thermal performance characterisation. We present a method for processing time-series from climate reanalysis and satellite-derived solar irradiance services, by implementing land-use, and elevation raster maps served in an elevation profile web-service. The article describes a methodology to: (1) adapt gridded weather data to four case-building sites in Europe; (2) calculate the incident solar radiation on the building facades; (3) estimate wind and temperature-dependent infiltration using a single-zone infiltration model and (4) including separating and evaluating the sheltering effect of buildings and trees in the vicinity, based on building footprints. Calculations of solar radiation, surface wind and air infiltration potential are done using validated models published in the scientific literature. We found that using scripting tools to automate geoprocessing tasks is widespread, and implementing such techniques in conjunction with an elevation profile web service made it possible to utilise information from open geospatial data surrounding a building site effectively. We expect that the modelling approach could be further improved, including diffuse-shading methods and evaluating other wind shelter methods for urban settings.

scholarly journals The determination of the thermal reliability criterion for building envelope structures

2019 ◽  
Vol 13 (2) ◽  
pp. 129-133
Author(s):  
Gennadiy Farenyuk
Keyword(s):  
Thermal Insulation ◽  
Building Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
Time Analysis ◽  
Thermal Reliability ◽  
Thermal Failure ◽  
Reliability Criterion ◽  
Building Operation

The paper presents the basic methodical principles for the time analysis of the variations of envelope structures’ thermal insulation properties and for the substantiation of the thermal reliability criterion, which should allow the analysis of the actual parameters of heat losses during the operation of buildings. In the paper, the state of the envelope structures thermal failure, the concept of building thermal envelope thermal reliability and the principles of its rating are defined. The physical meaning and basic criterion of the envelope structure thermal reliability are formulated. The application of the thermal reliability criterion allows determining the probable variations in the thermal insulation properties during the building operation and, accordingly, the changes of the building energy performance over time.

scholarly journals A Typical Meteorological Year Generation Based on NASA Satellite Imagery (GEOS-I) for Sokoto, Nigeria

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Olayinka S. Ohunakin ◽  
Muyiwa S. Adaramola ◽  
Olanrewaju M. Oyewola ◽  
Richard L. Fagbenle ◽  
Fidelis I. Abam
Keyword(s):  
Energy Systems ◽  
Building Energy ◽  
Global Solar Radiation ◽  
Dew Point ◽  
Weather Data ◽  
Maximum Temperature ◽  
Building Energy Simulation ◽  
Dew Point Temperature ◽  
Northwest Region

Computer simulation of buildings and solar energy systems are being used increasingly in energy assessments and design. This paper evaluates the typical meteorological year (TMY) for Sokoto, northwest region, Nigeria, using 23-year hourly weather data including global solar radiation, dew point temperature, mean temperature, maximum temperature, minimum temperature, relative humidity, and wind speed. Filkenstein-Schafer statistical method was utilized for the creation of a TMY for the site. The persistence of mean dry bulb temperature and daily global horizontal radiation on the five candidate months were evaluated. TMY predictions were compared with the 23-year long-term average values and are found to have close agreement and can be used in building energy simulation for comparative energy efficiency study.

scholarly journals Identifying suitable general circulation model for future building cooling energy analysis

2019 ◽  
Vol 111 ◽  
pp. 06056
Author(s):  
Kuo-Tsang Huang ◽  
Yu-Teng Weng ◽  
Ruey-Lung Hwang
Keyword(s):  
General Circulation ◽  
Meteorological Data ◽  
Circulation Model ◽  
Building Energy ◽  
Building Simulation ◽  
Weather Data ◽  
Climate Change Scenarios ◽  
Global Circulation Models ◽  
The Future ◽  
Energy Use Intensity

These future building energy studies mainly stem from hourly based dynamic building simulation results with the future weather data. The reliability of the future building energy forecast heavily relies on the accuracy of these future weather data. The global circulation models (GCMs) provided by IPCC are the major sources for constructing future weather data. However, there are uncertainties existed among them even with the same climate change scenarios. There is a need to develop a method on how to select the suitable GCM for local application. This research firstly adopted principal component analysis (PCA) method in choosing the suitable GCM for application in Taiwan, and secondly the Taiwanese hourly future meteorological data sets were constructed based on the selected GCM by morphing method. Thirdly, the future cooling energy consumption of an actual office building in the near (2011-2040), the mid (2041-2070), and the far future (2071-2100), were analysed. The results show that NorESM1-M GCM has the lowest root mean square error (RMSE) as opposed to the other GCMs, and was identified as the suitable GCM for further future climate generation processing. The building simulation against the future weather datasets revealed that the average cooling energy use intensity (EUIc) in Taipei will be increased by 12%, 17%, and 34% in the 2020s, 2050s, and 2080s, respectively, as compared to the current climate.

The African American Tobacco Control Leadership Council: Advocating for a menthol cigarette ban in San Francisco, California

2021 ◽  
pp. tobaccocontrol-2020-056215
Author(s):  
Sarah D Mills ◽  
Carol O McGruder ◽  
Valerie B Yerger
Keyword(s):  
African American ◽  
Tobacco Control ◽  
San Francisco ◽  
Community Support ◽  
Control Policy ◽  
Tobacco Product ◽  
Lessons Learned ◽  
Menthol Cigarette ◽  
The Usa ◽  
Product Sales

The African American Tobacco Control Leadership Council (AATCLC) is an advocacy group that works to inform the direction of tobacco control policy and priorities in the USA. This article narrates the AATCLC’s work advocating for a comprehensive, flavoured tobacco product sales ban in San Francisco, California. Recommendations for tobacco control advocates and lessons learned from their work are provided. The article concludes by discussing conditions necessary to enact the policy. These include having a dedicated advocacy team, community support, a policy sponsor, and clear and repeated messaging that is responsive to community concerns.

scholarly journals Updated Typical Weather Years for the Energy Simulation of Buildings in Mediterranean Climate. A Case Study for Sicily

Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4115 ◽  
Author(s):  
Vincenzo Costanzo ◽  
Gianpiero Evola ◽  
Marco Infantone ◽  
Luigi Marletta
Keyword(s):  
Residential Building ◽  
Building Energy ◽  
Energy Simulation ◽  
Weather Data ◽  
Weather Station ◽  
Simulation Tools ◽  
The Difference ◽  
Energy Simulations

Building energy simulations are normally run through Typical Weather Years (TWYs) that reflect the average trend of local long-term weather data. This paper presents a research aimed at generating updated typical weather files for the city of Catania (Italy), based on 18 years of records (2002–2019) from a local weather station. The paper reports on the statistical analysis of the main recorded variables, and discusses the difference with the data included in a weather file currently available for the same location based on measurements taken before the 1970s but still used in dynamic energy simulation tools. The discussion also includes a further weather file, made available by the Italian Thermotechnical Committee (CTI) in 2015 and built upon the data registered by the same weather station but covering a much shorter period. Three new TWYs are then developed starting from the recent data, according to well-established procedures reported by ASHRAE and ISO standards. The paper discusses the influence of the updated TWYs on the results of building energy simulations for a typical residential building, showing that the cooling and heating demand can differ by 50% or even 65% from the simulations based on the outdated weather file.

scholarly journals Impact Assessment for Building Energy Models Using Observed vs. Third-Party Weather Data Sets

2020 ◽  
Vol 12 (17) ◽  
pp. 6788 ◽  
Author(s):  
Eva Lucas Segarra ◽  
Germán Ramos Ruiz ◽  
Vicente Gutiérrez González ◽  
Antonis Peppas ◽  
Carlos Fernández Bandera
Keyword(s):  
Energy Demand ◽  
Meteorological Data ◽  
Building Energy ◽  
Third Party ◽  
Weather Data ◽  
Data Sets ◽  
Weather Station ◽  
Energy Models ◽  
The Impact ◽  
Energy Strategies

The use of building energy models (BEMs) is becoming increasingly widespread for assessing the suitability of energy strategies in building environments. The accuracy of the results depends not only on the fit of the energy model used, but also on the required external files, and the weather file is one of the most important. One of the sources for obtaining meteorological data for a certain period of time is through an on-site weather station; however, this is not always available due to the high costs and maintenance. This paper shows a methodology to analyze the impact on the simulation results when using an on-site weather station and the weather data calculated by a third-party provider with the purpose of studying if the data provided by the third-party can be used instead of the measured weather data. The methodology consists of three comparison analyses: weather data, energy demand, and indoor temperature. It is applied to four actual test sites located in three different locations. The energy study is analyzed at six different temporal resolutions in order to quantify how the variation in the energy demand increases as the time resolution decreases. The results showed differences up to 38% between annual and hourly time resolutions. Thanks to a sensitivity analysis, the influence of each weather parameter on the energy demand is studied, and which sensors are worth installing in an on-site weather station are determined. In these test sites, the wind speed and outdoor temperature were the most influential weather parameters.

scholarly journals An Ontology-Based Framework for Building Energy Management with IoT

Electronics ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 485 ◽  
Author(s):  
Clement Lork ◽  
Vishal Choudhary ◽  
Naveed Ul Hassan ◽  
Wayes Tushar ◽  
Chau Yuen ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Management ◽  
Management System ◽  
Energy Savings ◽  
Environmental Parameters ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Commercial Building ◽  
Building Energy Management ◽  
Building Management

In this paper, we develop an ontology-based framework for energy management in buildings. We divide the functional architecture of a building energy management system into three interconnected modules that include building management system (BMS), benchmarking (BMK), and evaluation & control (ENC) modules. The BMS module is responsible for measuring several useful environmental parameters, as well as real-time energy consumption of the building. The BMK module provides the necessary information required to understand the context and cause of building energy efficiency or inefficiency, and also the information which can further differentiate normal and abnormal energy consumption in different scenarios. The ENC module evaluates all the information coming from BMS and BMK modules, the information is contextualized, and finally the cause of energy inefficiency/abnormality and mitigating control actions are determined. Methodology to design appropriate ontology and inference rules for various modules is also discussed. With the help of actual data obtained from three different rooms in a commercial building in Singapore, a case study is developed to demonstrate the application and advantages of the proposed framework. By mitigating the appropriate cause of abnormal inefficiency, we can achieve 5.7%, 11.8% and 8.7% energy savings in Room 1, Room 2, and Room 3 respectively, while creating minimum inconvenience for the users.

Sign in / Sign up

Export Citation Format

Share Document