scholarly journals Metasurface Loaded High Gain Antenna based Microwave Imaging using Iteratively Corrected Delay Multiply and Sum Algorithm

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
M. Tarikul Islam ◽  
Md. Samsuzzaman ◽  
Salehin Kibria ◽  
Norbahiah Misran ◽  
Mohammad Tariqul Islam
Keyword(s):  
Breast Tissue ◽  
Low Cost ◽  
Dielectric Materials ◽  
High Gain ◽  
Microstrip Antennas ◽  
Positive Control ◽  
Microwave Imaging ◽  
Impedance Bandwidth ◽  
Multiple Tumor ◽  
Imaging Results

AbstractIn this paper, the design consideration is investigated for a cylindrical system with low-cost and low-loss dielectric materials for the detection of breast tumor using iteratively corrected delay multiply and sum (IC- DMAS) algorithm. Anomaly in breast tissue is one of the most crucial health issues for women all over the world today. Emergency medical imaging diagnosis can be harmlessly managed by microwave-based analysis technology. Microwave Imaging (MI) has been proved to be a reliable health monitoring approach that can play a fundamental role in diagnosing anomaly in breast tissue. An array of 16 high gain microstrip antennas loaded by Index Near-Zero (INZ) metasurfaces (MS), having the impedance bandwidth of 8.5 GHz (2.70–11.20 GHz) are used as transceivers for the system. The MS is used to increase the electrical length of the signal that results in the gain enhancements. The antennas are mounted in a cylindrical arrangement on a mechanical rotating table along with a phantom mounting podium. A non-reflective positive control switching matrix is used for transmitting and receiving microwave signals. A set of lab-made realistic heterogeneous breast phantoms containing skin, fat, glandular, and tumor tissue dielectric properties in individual layers are used to verify the performance of the proposed technique. The control of the mechanical unit, data collection, and post-processing is conducted via MATLAB. The system can detect multiple tumor objects. The imaging results and numerical Signal to Mean Ratio (SMR) values of the experiment validate the system efficiency and performance that can be a viable solution for tumor detections.

scholarly journals Microstrip Antenna with High Gain and Strong Directivity Loaded with Cascaded Hexagonal Ring-Shaped Metamaterial

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7289
Author(s):  
Cheng Cui ◽  
Yingnan Ren ◽  
Pengfei Tao ◽  
Binzhao Cao
Keyword(s):  
Microstrip Antenna ◽  
Reference Value ◽  
High Gain ◽  
Microstrip Antennas ◽  
Impedance Bandwidth ◽  
Resonant Frequencies ◽  
Hexagonal Ring ◽  
Unit Structure ◽  
Ground Plate ◽  
Simulation Results

A new cascaded hexagonal ring-shaped metamaterial element is designed, which is arranged periodically and placed on the top of a traditional microstrip antenna to optimize the performance of the traditional antenna. The simulation results show that the new metamaterial microstrip antenna works at near 10 GHz, the impedance bandwidth is extended by 0.25 GHz and the gain is increased by 113.6% compared with a traditional microstrip antenna. Cross-shaped slots are etched on the ground plate of the microstrip antenna to widen the impedance bandwidth. It is shown that the impedance bandwidths at the resonant frequencies of 10 GHz and 14 GHz are broadened by 0.06 GHz and 0.56 GHz, respectively, and the gain of the slot-etched antenna is 13.454 dB. After the metamaterial unit structure is optimized, a nested double-hexagon ring-shaped electromagnetic metamaterial unit structure is proposed. The metamaterial slot microstrip antenna operates in two frequency bands of 10 GHz and 14 GHz; the relative bandwidths are increased to 16.9% and 19.4% with two working bandwidths of 1.74 GHz and 4.98 GHz, respectively; and the gain and directivity are also improved compared with the traditional microstrip antenna. The metamaterial unit structure proposed in this paper is of certain reference value for the variety of metamaterial and the application of metamaterial in traditional microstrip antennas.

Microstrip Antenna-inception, Progress and Current-state of The Art Review

2020 ◽  
Vol 13 (6) ◽  
pp. 769-794 ◽  
Author(s):  
Gunaram ◽  
Vijay Sharma
Keyword(s):  
Microstrip Antenna ◽  
Communication Systems ◽  
State Of The Art ◽  
Horn Antenna ◽  
High Gain ◽  
Microstrip Antennas ◽  
Impedance Bandwidth ◽  
Ieee Transaction ◽  
Manufacturing Techniques ◽  
Number Of Publications

Background: Microstrip antenna has gained significant attention for a large number of communication systems due to its adaptable features and compatibility. Objective: The major objective of this manuscript is to assess the microstrip antenna technology for structure adaptability, the feature based performance capabilities, design and versatility. Methods: The major reviews conducted in every decade on antenna technology highlighted the significance of microstrip antenna technology. Moreover, a review of the articles on microstrip antenna published in ‘IEEE Transaction on Antenna and Propagation’ revealed that these antennas can primarily be used instead of other types of antennas. : The available presentation of microstrip antennas includes features, such as small size, flatness (low profiles), wide-ranging impedance bandwidth, high gain, and circular polarization. A chronological assessment of the major endeavors in the microstrip antenna study conducted during the last four decades, is highlighted. Results: This manuscript focuses on the cutting-edge developments in the microstrip antenna technology and facilitates various modern designated extents, which provide the readers an insight into the tractability presented by microstrip antennas and their prospective benefits as compared to different types of other antennas like lens antenna, dish antenna, horn antenna, etc. The recent advancements in manufacturing techniques of microstrip antenna are reviewed. A large number of publications on the applications of microstrip antennas, such as communication, sensing, energy harvesting, biomedical relevance etc. are also included to show their importance at present. Conclusion: This article presents a state of the art evaluation of the research carried out on microstrip antennas from the time of their inception to till date. It consolidates the information for the researchers working in this field and will be helpful in enhancing the efforts for the research.

High gain antenna for n260- & n261-bands and augmentation in bandwidth for mm-wave range by patch current diversions

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Deepinder Singh Wadhwa ◽  
Praveen Kumar Malik ◽  
Jaspal Singh Khinda
Keyword(s):  
Loss Tangent ◽  
Communication Systems ◽  
Low Cost ◽  
Ground Plane ◽  
High Gain ◽  
Impedance Bandwidth ◽  
Antenna Structure ◽  
Content Type ◽  
High Loss ◽  
Wave Range

Purpose A compact low-cost antenna structure is proposed to augment the impedance-bandwidth in mm-wave range. Beside it, the paper also aimed to enhance high gain for n260 and n261-bands, suitable for futuristic communication systems. Design/methodology/approach Design consists of radiating patch and a partial ground plane with semi-circle arc for smooth flow of current. The lower corners of patch are gradually clipped away to make the patch nearly elliptical. Further, two tilted slots at an angle α = 15° are etched at the edges of the patch to augment bandwidth for mm-wave range. These slots divert the periphery current of semi elliptical patch towards center portion of antenna which ensures the participation in radiation of central portion of patch. The upper corners are also clipped away to limit the copper losses and smoothly flow of current. The proposed antenna is designed using HFSS and it is structured on inexpensive FR4 substrate of size 27.5 × 20 mm2. Findings It supports enormous −10 dB bandwidth of 5.86–40GHz (148.89%) even though use of high loss-tangent material and high gain for 28 GHz (27.50–28.35 GHz) n261–band and 37 GHz (37–38.6 GHz) and 39 GHz (38.6–40GHz) n260–bands with a peak-gain of 8.76 dBi, 10.8 dBi and 9.92 dBi, respectively. Originality/value The proposed methodology of design is very useful to enhance impedance bandwidth to cover all C–, X–, Ku–, K– and Ka–band even though use of low cost material with high loss tangent. In recent literature, the designs were implemented with a costly material and having very low loss tangent and covers partial suggest bands.

scholarly journals A Broadband High-Gain Printed Antenna Array Using Dipole and Loop Patches for 5G Communication Systems

2021 ◽  
Vol 15 ◽  
pp. 42-45
Author(s):  
Yuanzhi Liu ◽  
Mustapha C.E. Yagoub
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Low Cost ◽  
High Gain ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Wave Band ◽  
Printed Antenna ◽  
Compact Size ◽  
5G Communication

A broadband and high-gain printed antenna array is presented in this paper. Its single antenna element consists of a loop and two symmetric dipole patches, making the element exhibiting broad impedance bandwidth and improved gain at the targeted frequency, which is 28 GHz, one of the 5G mm-wave band, for this design. An 8×3 antenna array fed by a microstrip line feed network was designed and simulated. With a compact size of 98×32.5 mm2 , the array presents a broad -10 dB impedance bandwidth of 6.8 GHz (24.3%) and a high gain of 18 dBi at 28 GHz. Besides, the single-layered array also features low profile, simple geometry, and low cost, making it a good candidate for 5G communication systems.

Bilayer split-ring chiral metamaterial based reconfigurable antenna for polarization conversion

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Preet Kaur ◽  
Pravin R. Prajapati
Keyword(s):  
Low Cost ◽  
Axial Ratio ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Circularly Polarized ◽  
Left Hand ◽  
Rectangular Patch ◽  
Mode 2 ◽  
Chiral Metamaterial

Abstract A bilayer split-ring chiral metamaterial converts the linearly polarized wave, into a nearly perfect left or right-handed circularly polarized wave. The proposed antenna is intended to operate at center frequency of 5.80 GHz with switchable polarization capability. The polarization re-configurability is achieved by electronically switching of two PIN-diode pairs, which are embedded into bilayer split-ring Chiral Metamaterial. The optimized length of rectangular patch is 16 mm and width is 12.1 mm. Two types of radiation characteristics offered by the proposed antenna; left hand circularly polarized in mode 1 and right hand circularly polarized in mode 2. Measured results show that its impedance bandwidth is 155 MHz from 5.70 to 5.855 GHz for both mode 1 and mode 2. The measured axial-ratio bandwidth is 100 MHz from 5.75 to 5.85 GHz for mode 1 and 110 MHz from 5.73 to 5.84 GHz for mode 2. Antenna has LHCP gain of 2.52 dBi and RHCP gain of −23 dBi in mode 1. RHCP gain of 2 dBi and polarization purity of about −20 dBi is obtained in mode 2. The proposed antenna has simple structure, low cost and it has potential application in field of wireless communication (i.e., WiMax, WLAN etc.).

scholarly journals Single-Layer Line-Fed Broadband Microstrip Patch Antenna on Thin Substrates

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 37
Author(s):  
Roberto Vincenti Gatti ◽  
Riccardo Rossi ◽  
Marco Dionigi
Keyword(s):  
Patch Antenna ◽  
State Of The Art ◽  
Low Cost ◽  
Single Layer ◽  
Microstrip Antennas ◽  
Microstrip Patch Antenna ◽  
Layer Line ◽  
Limited Bandwidth ◽  
Microstrip Patch ◽  
Effective Design

In this work, the issue of limited bandwidth typical of microstrip antennas realized on a single thin substrate is addressed. A simple yet effective design approach is proposed based on the combination of traditional single-resonance patch geometries. Two novel shaped microstrip patch antenna elements with an inset feed are presented. Despite being printed on a single-layer substrate with reduced thickness, both radiators are characterized by a broadband behavior. The antennas are prototyped with a low-cost and fast manufacturing process, and measured results validate the simulations. State-of-the-art performance is obtained when compared to the existing literature, with measured fractional bandwidths of 3.71% and 6.12% around 10 GHz on a 0.508-mm-thick Teflon-based substrate. The small feeding line width could be an appealing feature whenever such radiating elements are to be used in array configurations.

scholarly journals A 300-GHz low-cost high-gain fully metallic Fabry–Perot cavity antenna for 6G terahertz wireless communications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Basem Aqlan ◽  
Mohamed Himdi ◽  
Hamsakutty Vettikalladi ◽  
Laurent Le-Coq
Keyword(s):  
Communication Systems ◽  
Low Cost ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Wireless Communication Systems ◽  
Beam Radiation ◽  
Compact Size ◽  
Fabry Perot ◽  
Operating Bandwidth ◽  
Polarization Level

AbstractA low-cost, compact, and high gain Fabry–Perot cavity (FPC) antenna which operates at 300 GHz is presented. The antenna is fabricated using laser-cutting brass technology. The proposed antenna consists of seven metallic layers; a ground layer, an integrated stepped horn element (three-layers), a coupling layer, a cavity layer, and an aperture-frequency selective surface (FSS) layer. The proposed aperture-FSS function acts as a partially reflective surface, contributing to a directive beam radiation. For verification, the proposed sub-terahertz (THz) FPC antenna prototype was developed, fabricated, and measured. The proposed antenna has a measured reflection coefficient below − 10 dB from 282 to 304 GHz with a bandwidth of 22 GHz. The maximum measured gain observed is 17.7 dBi at 289 GHz, and the gain is higher than 14.4 dBi from 285 to 310 GHz. The measured radiation pattern shows a highly directive pattern with a cross-polarization level below − 25 dB over the whole band in all cut planes, which confirms with the simulation results. The proposed antenna has a compact size, low fabrication cost, high gain, and wide operating bandwidth. The total height of the antenna is 1.24 $${\lambda }_{0}$$ λ 0 ($${\lambda }_{0}$$ λ 0 at the design frequency, 300 GHz) , with a size of 2.6 mm × 2.6 mm. The proposed sub-THz waveguide-fed FPC antenna is suitable for 6G wireless communication systems.

scholarly journals Fast, Robust, and Low-Cost Microwave Imaging of Multiple Non-Metallic Pipes

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1762
Author(s):  
Yuki Gao ◽  
Maryam Ravan ◽  
Reza K. Amineh
Keyword(s):  
Antenna Arrays ◽  
Oil And Gas ◽  
Imaging System ◽  
Imaging Techniques ◽  
Low Cost ◽  
Microwave Imaging ◽  
Airport Security ◽  
Destructive Testing ◽  
Security Screening ◽  
Industrial Sectors

The use of non-metallic pipes and composite components that are low-cost, durable, light-weight, and resilient to corrosion is growing rapidly in various industrial sectors such as oil and gas industries in the form of non-metallic composite pipes. While these components are still prone to damages, traditional non-destructive testing (NDT) techniques such as eddy current technique and magnetic flux leakage technique cannot be utilized for inspection of these components. Microwave imaging can fill this gap as a favorable technique to perform inspection of non-metallic pipes. Holographic microwave imaging techniques are fast and robust and have been successfully employed in applications such as airport security screening and underground imaging. Here, we extend the use of holographic microwave imaging to inspection of multiple concentric pipes. To increase the speed of data acquisition, we utilize antenna arrays along the azimuthal direction in a cylindrical setup. A parametric study and demonstration of the performance of the proposed imaging system will be provided.

Sign in / Sign up

Export Citation Format

Share Document