scholarly journals Ecology of Moscow urban agglomeration: problems and the ways of solving

2021 ◽  
Vol 263 ◽  
pp. 05045
Author(s):  
Sergey Mezentzev
Keyword(s):  
Communication Systems ◽  
Power Plants ◽  
Combustion Engine ◽  
Renewable Energy Sources ◽  
Mental Simulation ◽  
Urban Agglomeration ◽  
Capital City ◽  
Ecological Problem ◽  
Industrial Enterprises ◽  
Ecological Problems

The present paper approaches the current ecological issues of Moscow urban agglomeration, including Moscow, the capital city of Russia, and Moscow region as well as the ways in which these issues could be solved. In the course of research, there have been used system and complex approaches, the methods of analysis, synthesis, abstraction, generalization, mental simulation, the methods of observation, comparison, statistical methods, and visualization. It was noted that the significant concentration of population in Moscow urban agglomeration leads to the population overflow and acute ecological problems on the given territory. Currently, ecological system of Moscow urban agglomeration represents the collective of interrelated and interconnected natural, anthropogenic and techno genic components. Techno genic and anthropogenic causes of environmental pollution, such as urban planning, industrial enterprises, power plants, transport, communication systems, domestic rubbish and wastes, have been studied in details. Also, there was given comparison of ecological situation of Moscow urban agglomeration, from one side, and the Netherlands, the Tula and Kursk regions of Russia, from the other side. Then, the transition to the search of new way of solving of ecological problems is done. As the most effective methods of ecological problem solving and reducing anthropogenic impact on environment, there were proposed: the lowering of migration flows into Moscow urban agglomeration, the use of renewable energy sources, non-waste technologies, construction of rubbish recycling plants and treatment facilities, liquidation of unauthorized disposal fields, substitution of the combustion engine transport by the transport with electrical engines.

scholarly journals Environmental effect of molecular degradation of internal combustion engine exhaust gases

2021 ◽  
pp. 31-35
Author(s):  
В.В. Мурамович ◽  
В.Ю. Каминский ◽  
С.Н. Турусов
Keyword(s):  
Power Plants ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Ecological Problem ◽  
Exhaust Gas ◽  
Combustion Engines ◽  
Exhaust Gases ◽  
Advantages And Disadvantages ◽  
Toxic Components

Рассматривается экологическая проблема очистки отработавших газов углеводородных энергетических установок от токсичных компонентов. Показан состав основных токсичных компонентов, приведены значения энергии связи их молекул. Представлены существующие методы улучшения экологических характеристик двигателей внутреннего сгорания: рециркуляция отработавших газов, снижение степени сжатия, уменьшение угла опережения впрыска, добавление присадок к топливу и др. Перечислены их достоинства и недостатки. Предлагается новый метод – использование электромагнитных полей для очистки отработавших газов от токсичных компонентов. Выполнен оценочный расчет его эффективности. Показано, что применение устройств модификации в топливной системе двигателей внутреннего сгорания, а также в системе выпуска отработавших газов позволяет существенно снизить выбросы в окружающую среду вредных веществ, и, при этом, не требует принципиальных изменений в конструкции двигателей. Рабочий ресурс предлагаемых устройств электромагнитной обработки обусловлен применяемыми для их изготовления материалами. The ecological problem of cleaning the exhaust gases of hydrocarbon power plants from toxic components is considered. The composition of the main toxic components is shown; the values of the binding energy of their molecules are given. The existing methods of improving the environmental characteristics of internal combustion engines are presented: exhaust gas recirculation, reduction of the compression ratio, reduction of the injection advance angle, addition of fuel additives, etc. Their advantages and disadvantages are listed. A new method is proposed – the use of electromagnetic fields for cleaning exhaust gases from toxic components. An estimated calculation of its effectiveness is performed. It is shown that the use of modification devices in the fuel system of internal combustion engines, as well as in the exhaust gas system, can significantly reduce emissions of harmful substances into the environment, and, at the same time, does not require fundamental changes in the design of engines. The materials used for their manufacture determine the working life of the proposed electromagnetic processing devices.

АКУСТИЧНА ПОМІТНІСТЬ БЕЗПІЛОТНИХ ЛІТАЛЬНИХ АПАРАТІВ З СИЛОВИМИ УСТАНОВКАМИ НА БАЗІ ПОРШНЕВИХ ДВИГУНІВ

2020 ◽  
pp. 62-80
Author(s):  
В. В. Руденко ◽  
И. В. Калужинов ◽  
Н. А. Андрущенко
Keyword(s):  
Control System ◽  
Internal Combustion Engine ◽  
Power Plants ◽  
Combustion Engine ◽  
Spectral Characteristics ◽  
Experimental Studies ◽  
Internal Combustion ◽  
Detection Range ◽  
Acoustic Signature ◽  
Static Conditions

The presence in operation of many prototypes of UAVs with propeller propellers, the use of such devices at relatively low altitudes and flight speeds makes the problem of noise reduction from UAVs urgent both from the point of view of acoustic imperceptibility and ecology.The aim of the work is to determine a set of methods that help to reduce the visibility of UAVs in the acoustic range. It is shown that the main source of noise from the UAV on the ground is the power plant, which includes the engine and the propeller. The parameters of the power plants influencing the processes that determine the acoustic signature of the UAV were investigated. A comprehensive analysis of the factors affecting visibility was carried out. The power plants include two-stroke and four-stroke engines, internal combustion and two-blade propellers. The use of silencers on the exhaust of the internal combustion engine was considered. The spectral characteristics of the acoustic fields of the propeller-driven power plants for the operating sample of the UAV "Eco" were obtained. The measurements were carried out in one-third octave and 1/48 octave frequency bands under static conditions. The venue is the KhAI airfield. Note that the propellers that were part of the power plants operated at Reynolds numbers (Re0,75<2*105), which can significantly affect its aerodynamic and acoustic characteristics. It is shown that when choosing a UAV control system, one should take into account the fact that two-stroke piston engines are the dominant source in the noise of propeller-driven control systems in the absence of a hood and mufflers in the intake and exhaust tracts. The use of a four-stroke internal combustion engine significantly reduces the noise of the control system. In the general case, the position of the boundaries of the zone of acoustic visibility of a UAV at the location of the observer is determined by the ratio between the intensity of acoustic radiation perceived by the observer from the UAV and the intensity of sound corresponding to the natural acoustic background and depends on the degree of manifestation of acoustic effects accompanying the propagation of sound in a turbulent atmosphere - the refraction of sound waves. Absorption and dissipation of acoustic energy. The calculation and comparison of the UAV detection range was carried out taking into account the existing natural maskers.The results of experimental studies are presented that allow assessing the degree of acoustic signature of the UAV. A set of measures aimed at reducing the intensity of the acoustic signature of the UAV in various regions of the radiation spectrum has been determined.

A Review on Utilization of Fly- Ash and Pond-Ash as a Partial Replacement of Cement in Concrete Mix Design

2018 ◽  
pp. 413-418
Author(s):  
Harshkumar Patel ◽  
Yogesh Patel
Keyword(s):  
Fly Ash ◽  
Electricity Generation ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Strength Test ◽  
Partial Replacement ◽  
Pond Ash ◽  
Research Activities ◽  
Ash Disposal

Now-a-days energy planners are aiming to increase the use of renewable energy sources and nuclear to meet the electricity generation. But till now coal-based power plants are the major source of electricity generation. Disadvantages of coal-based thermal power plants is disposal problem of fly ash and pond ash. It was earlier considered as a total waste and environmental hazard thus its use was limited, but now its useful properties have been known as raw material for various application in construction field. Fly ash from the thermal plants is available in large quantities in fine and coarse form. Fine fly ash is used in construction industry in some amount and coarse fly ash is subsequently disposed over land in slurry forms. In India around 180 MT fly is produced and only around 45% of that is being utilized in different sectors. Balance fly ash is being disposed over land. It needs one acre of land for ash disposal to produce 1MW electricity from coal. Fly ash and pond ash utilization helps to reduce the consumption of natural resources. The fly ash became available in coal based thermal power station in the year 1930 in USA. For its gainful utilization, scientist started research activities and in the year 1937, R.E. Davis and his associates at university of California published research details on use of fly ash in cement concrete. This research had laid foundation for its specification, testing & usages. This study reports the potential use of pond-ash and fly-ash as cement in concrete mixes. In this present study of concrete produced using fly ash, pond ash and OPC 53 grade will be carried. An attempt will be made to investigate characteristics of OPC concrete with combined fly ash and pond ash mixed concrete for Compressive Strength test, Split Tensile Strength test, Flexural Strength test and Durability tests. This paper deals with the review of literature for fly-ash and pond-ash as partial replacement of cement in concrete.

Effect of Chemical Hythane Composition on Pressure in Combustion Chamber of Engine

2019 ◽  
pp. 36-42
Author(s):  
A. P. Shaikin ◽  
I. R. Galiev
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Power Plants ◽  
Engine Speed ◽  
Combustion Engine ◽  
Fuel Mixture ◽  
Maximum Pressure ◽  
Chamber Volume ◽  
Excess Air ◽  
Scientific Papers

The article analyzes the influence of chemical composition of hythane (a mixture of natural gas with hydrogen) on pressure in an engine combustion chamber. A review of the literature has showed the relevance of using hythane in transport energy industry, and also revealed a number of scientific papers devoted to studying the effect of hythane on environmental and traction-dynamic characteristics of the engine. We have studied a single-cylinder spark-ignited internal combustion engine. In the experiments, the varying factors are: engine speed (600 and 900 min-1), excess air ratio and hydrogen concentration in natural gas which are 29, 47 and 58% (volume).The article shows that at idling engine speed maximum pressure in combustion chamber depends on excess air ratio and proportion hydrogen in the air-fuel mixture – the poorer air-fuel mixture and greater addition of hydrogen is, the more intense pressure increases. The positive effect of hydrogen on pressure is explained by the fact that addition of hydrogen contributes to increase in heat of combustion fuel and rate propagation of the flame. As a result, during combustion, more heat is released, and the fuel itself burns in a smaller volume. Thus, the addition of hydrogen can ensure stable combustion of a lean air-fuel mixture without loss of engine power. Moreover, the article shows that, despite the change in engine speed, addition of hydrogen, excess air ratio, type of fuel (natural gas and gasoline), there is a power-law dependence of the maximum pressure in engine cylinder on combustion chamber volume. Processing and analysis of the results of the foreign and domestic researchers have showed that patterns we discovered are applicable to engines of different designs, operating at different speeds and using different hydrocarbon fuels. The results research presented allow us to reduce the time and material costs when creating new power plants using hythane and meeting modern requirements for power, economy and toxicity.

PROSPECTS OF OBTAINING ALTERNATIVE FUEL FROM VARIOUS BIOMASS AND WASTE SPECIES IN AZERBAIJAN

2019 ◽  
pp. 25-41
Author(s):  
O. M. Salamov ◽  
F. F. Aliyev
Keyword(s):  
Power Plants ◽  
Energy Intensity ◽  
Oil And Gas ◽  
Renewable Energy Sources ◽  
Calorific Value ◽  
High Energy ◽  
Energy Sector ◽  
Energy Sources ◽  
Mineral Fertilizers ◽  
Gaseous Fuels

The paper discusses the possibility of obtaining liquid and gaseous fuels from different types of biomass (BM) and combustible solid waste (CSW) of various origins. The available world reserves of traditional types of fuel are analyzed and a number of environmental shortcomings that created during their use are indicated. The tables present the data on the conditional calorific value (CCV) of the main traditional and alternative types of solid, liquid and gaseous fuels which compared with CCV of various types of BM and CSW. Possible methods for utilization of BM and CSW are analyzed, as well as the methods for converting them into alternative types of fuel, especially into combustible gases.Reliable information is given on the available oil and gas reserves in Azerbaijan. As a result of the research, it was revealed that the currently available oil reserves of Azerbaijan can completely dry out after 33.5 years, and gas reserves–after 117 years, without taking into account the growth rates of the exported part of these fuels to European countries. In order to fix this situation, first of all it is necessary to use as much as possible alternative and renewable energy sources, especially wind power plants (WPP) and solar photovoltaic energy sources (SFES) in the energy sector of the republic. Azerbaijan has large reserves of solar and wind energy. In addition, all regions of the country have large reserves of BM, and in the big cities, especially in industrial ones, there are CSW from which through pyrolysis and gasification is possible to obtain a high-quality combustible gas mixture, comprising: H2 + CO + CH4, with the least amount of harmful waste. The remains of the reaction of thermochemical decomposition of BM and CSW to combustible gases can also be used as mineral fertilizers in agriculture. The available and projected resources of Azerbaijan for the BM and the CSW are given, as well as their assumed energy intensity in the energy sector of the republic.Given the high energy intensity of the pyrolysis and gasification of the BM and CSW, at the present time for carrying out these reactions, the high-temperature solar installations with limited power are used as energy sources, and further preference is given to the use of WPP and SFES on industrial scale.

WIND-DIESEL INSTALLATIONS FOR ISOLATED FAR NORTH AREAS

2020 ◽  
Author(s):  
Александр Григорьевич Комков ◽  
Александр Константинович Сокольский
Keyword(s):  
Energy Supply ◽  
Alternative Energy ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Economic Potential ◽  
Far North ◽  
Alternative Energy Sources ◽  
Current State ◽  
Solar Power Plants

В статье рассмотрено современное состояние энергоснабжения и перспективы развития альтернативных источников энергии на территории Крайнего Севера. Отмечено, что несмотря на острую потребность во внедрении возобновляемых источников энергии, установленные мощности всех ветряных и солнечных электростанций в регионе не превышают 7-8 МВт. Также в работе рассчитаны технический и экономический потенциал ветровой энергии региона, на основании которых подобрана наиболее эффективная установка. The article discusses the current state of energy supply and the prospects for the development of alternative energy sources in the Far North. It is noted that despite the urgent need for the introduction of renewable energy sources, the installed capacities of all wind and solar power plants in the region do not exceed 7-8 MW. Also, the technical and economic potential of the region’s wind energy was calculated based on which the most efficient installation was selected.

scholarly journals Analyzing Trade in Continuous Intra-Day Electricity Market: An Agent-Based Modeling Approach

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3860
Author(s):  
Priyanka Shinde ◽  
Ioannis Boukas ◽  
David Radu ◽  
Miguel Manuel de Manuel de Villena ◽  
Mikael Amelin
Keyword(s):  
Renewable Energy ◽  
Electricity Market ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Agent Based Modeling ◽  
Market Liquidity ◽  
Energy Sources ◽  
Modeling Framework ◽  
Agent Based

In recent years, the vast penetration of renewable energy sources has introduced a large degree of uncertainty into the power system, thus leading to increased trading activity in the continuous intra-day electricity market. In this paper, we propose an agent-based modeling framework to analyze the behavior and the interactions between renewable energy sources, consumers and thermal power plants in the European Continuous Intra-day (CID) market. Additionally, we propose a novel adaptive trading strategy that can be used by the agents that participate in CID market. The agents learn how to adapt their behavior according to the arrival of new information and how to react to changing market conditions by updating their willingness to trade. A comparative analysis was performed to study the behavior of agents when they adopt the proposed strategy as opposed to other benchmark strategies. The effects of unexpected outages and information asymmetry on the market evolution and the market liquidity were also investigated.

scholarly journals MOSAIK and FMI-Based Co-Simulation Applied to Transient Stability Analysis of Grid-Forming Converter Modulated Wind Power Plants

2021 ◽  
Vol 11 (5) ◽  
pp. 2410
Author(s):  
Nakisa Farrokhseresht ◽  
Arjen A. van der Meer ◽  
José Rueda Torres ◽  
Mart A. M. M. van der Meijden
Keyword(s):  
Power System ◽  
Time Domain ◽  
Power Plants ◽  
Transient Stability ◽  
Renewable Energy Sources ◽  
Critical Factor ◽  
Primary Control ◽  
Simulation Approach ◽  
Wide Range ◽  
Grid Side

The grid integration of renewable energy sources interfaced through power electronic converters is undergoing a significant acceleration to meet environmental and political targets. The rapid deployment of converters brings new challenges in ensuring robustness, transient stability, among others. In order to enhance transient stability, transmission system operators established network grid code requirements for converter-based generators to support the primary control task during faults. A critical factor in terms of implementing grid codes is the control strategy of the grid-side converters. Grid-forming converters are a promising solution which could perform properly in a weak-grid condition as well as in an islanded operation. In order to ensure grid code compliance, a wide range of transient stability studies is required. Time-domain simulations are common practice for that purpose. However, performing traditional monolithic time domain simulations (single solver, single domain) on a converter-dominated power system is a very complex and computationally intensive task. In this paper, a co-simulation approach using the mosaik framework is applied on a power system with grid-forming converters. A validation workflow is proposed to verify the co-simulation framework. The results of comprehensive simulation studies show a proof of concept for the applicability of this co-simulation approach to evaluate the transient stability of a dominant grid-forming converter-based power system.

scholarly journals Sizing and Management of Energy Storage Systems in Large-Scale Power Plants Using Price Control and Artificial Intelligence

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3296
Author(s):  
Carlos García-Santacruz ◽  
Luis Galván ◽  
Juan M. Carrasco ◽  
Eduardo Galván
Keyword(s):  
Energy Storage ◽  
Power Plants ◽  
Large Scale ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Ancillary Services ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Electric System ◽  
Fundamental Part

Energy storage systems are expected to play a fundamental part in the integration of increasing renewable energy sources into the electric system. They are already used in power plants for different purposes, such as absorbing the effect of intermittent energy sources or providing ancillary services. For this reason, it is imperative to research managing and sizing methods that make power plants with storage viable and profitable projects. In this paper, a managing method is presented, where particle swarm optimisation is used to reach maximum profits. This method is compared to expert systems, proving that the former achieves better results, while respecting similar rules. The paper further presents a sizing method which uses the previous one to make the power plant as profitable as possible. Finally, both methods are tested through simulations to show their potential.

scholarly journals Portfolio optimization of power plants by using renewable energy in Iran

2020 ◽  
Author(s):  
Seyedeh Asra Ahmadi ◽  
Seyed Mojtaba Mirlohi ◽  
Mohammad Hossein Ahmadi ◽  
Majid Ameri
Keyword(s):  
Renewable Energy ◽  
Portfolio Optimization ◽  
Energy Supply ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Modern Society ◽  
Sustainable Growth ◽  
Electricity Sector ◽  
Capital Costs

Abstract Lack of investment in the electricity sector has created a huge bottleneck in the continuous flow of energy in the market, and this will create many problems for the sustainable growth and development of modern society. The main reason for this lack of investment is the investment risk in the electricity sector. One way to reduce portfolio risk is to diversify it. This study applies the concept of portfolio optimization to demonstrate the potential for greater use of renewable energy, which reduces the risk of investing in the electricity sector. Besides, it shows that investing in renewable energies can offset the risk associated with the total input costs. These costs stem from the volatility of associated prices, including fossil fuel, capital costs, maintenance, operation and environmental costs. This case study shows that Iran can theoretically supply ~33% of its electricity demand from renewable energy sources compared to its current 15% share. This case study confirms this finding and predicts that Iran, while reducing the risk of investing in electricity supply, can achieve a renewable energy supply of ~9% with an average increase in supply costs. Sensitivity analysis further shows that with a 10% change in input cost factors, the percentage of renewable energy supply is only partially affected, but basket costs change according to the scenario of 5–32%. Finally, suggestions are made that minimize risk rather than cost, which will bring about an increase in renewable energy supply.

Sign in / Sign up

Export Citation Format

Share Document