scholarly journals Impact of Ozone Used-Alone and Coagulation Aid Treatment on The Reduction of Trihalomethanes Components

2021 ◽  
Vol 318 ◽  
pp. 04008
Author(s):  
Heba A. Yousif ◽  
Nawar O. A. AL-Musawi
Keyword(s):  
Research Work ◽  
Calcium Content ◽  
Raw Water ◽  
Tigris River ◽  
Coagulant Dosage ◽  
Particle Stability ◽  
Fractionation Analysis ◽  
Moderate Rate ◽  
Research Findings ◽  
The Impact

The whole research paper examines the impact of ozone as either a just use-alone and coagulation benefit, mainly upon the reduction of dissolved organic carbon from the water with a moderate rate of DOC 10.75 mg/land CaCO3 calcium hardness 300 mg/l. A raw water sample has been taken from the Tigris River (Baghdad, Iraq) was being adopted in research work. The performance of ozone therapy has been assessed by calculations of DOC, DOC quantities, UV254, as well as total trihalomethane (TTHM). Research findings have shown that with 0.9 mg O3/mg DOC ozone use-alone, approximately 60% UV254 reduction and approximately 28% DOC reduction will occur.DOC fractionation analysis indicates that within the water samples, ozone could alter the composition of DOC, transform the hydrophobic fractions toward hydrophilic fractions and reduce TTHM. Ozone was also responsible for a significant reduction in particle stability as well as the dissolved calcium content. Improved water flocculation and improved DOC removal were triggered by these simultaneous ozonation effects. This resulted in a decrease in the coagulant dosage while the dosage of ozone is considerably higher over 0.3 mg O3/mg DOC has added before ferric sulfate coagulation. The pre-ozonation coagulation method also accomplished favorable removal of TTHM with all tested ozone doses (0 to 0.9 mg O3/mg DOC), resulting in lower TTHM during pre-ozonated coagulated waters unlike those through related ozonated waters.

Piezoelectric β-polymorph formation of new textiles by surface modification with coating process based on interfacial interaction on the conformational variation of poly (vinylidene fluoride) (PVDF) chains

2020 ◽  
Vol 91 (3) ◽  
pp. 31301
Author(s):  
Nabil Chakhchaoui ◽  
Rida Farhan ◽  
Meriem Boutaldat ◽  
Marwane Rouway ◽  
Adil Eddiai ◽  
...  
Keyword(s):  
High Efficiency ◽  
Vinylidene Fluoride ◽  
Research Work ◽  
Research Area ◽  
Interfacial Interaction ◽  
Tetraethyl Orthosilicate ◽  
Poly Vinylidene Fluoride ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Advanced Applications

Novel textiles have received a lot of attention from researchers in the last decade due to some of their unique features. The introduction of intelligent materials into textile structures offers an opportunity to develop multifunctional textiles, such as sensing, reacting, conducting electricity and performing energy conversion operations. In this research work nanocomposite-based highly piezoelectric and electroactive β-phase new textile has been developed using the pad-dry-cure method. The deposition of poly (vinylidene fluoride) (PVDF) − carbon nanofillers (CNF) − tetraethyl orthosilicate (TEOS), Si(OCH2CH3)4 was acquired on a treated textile substrate using coating technique followed by evaporation to transform the passive (non-functional) textile into a dynamic textile with an enhanced piezoelectric β-phase. The aim of the study is the investigation of the impact the coating of textile via piezoelectric nanocomposites based PVDF-CNF (by optimizing piezoelectric crystalline phase). The chemical composition of CT/PVDF-CNC-TEOS textile was detected by qualitative elemental analysis (SEM/EDX). The added of 0.5% of CNF during the process provides material textiles with a piezoelectric β-phase of up to 50% has been measured by FTIR experiments. These results indicated that CNF has high efficiency in transforming the phase α introduced in the unloaded PVDF, to the β-phase in the case of nanocomposites. Consequently, this fabricated new textile exhibits glorious piezoelectric β-phase even with relatively low coating content of PVDF-CNF-TEOS. The study demonstrates that the pad-dry-cure method can potentially be used for the development of piezoelectric nanocomposite-coated wearable new textiles for sensors and energy harvesting applications. We believe that our study may inspire the research area for future advanced applications.

Analisis Pengaruh Penerimaan Pajak Daerah Dan Retribusi Daerah Terhadap Pendapatan Asli Daerah Kabupaten/Kota Di Jawa Tengah

2015 ◽  
Vol 2 (1) ◽  
pp. 51-61
Author(s):  
Beta Asteria
Keyword(s):  
Local Government ◽  
Government Budget ◽  
Multiple Regressions ◽  
Independent Variables ◽  
Central Java ◽  
Directorate General ◽  
Fiscal Balance ◽  
Research Findings ◽  
Local Government Budget ◽  
The Impact

This research deals with the impact of Local Tax and Retribution Receipt to Local Government Original Receipt of Regency/City in Central Java from 2008 to 2012. This research utilizes the data of actual of local government budget from Directorate General of Fiscal Balance (Direktorat Jendral Perimbangan Keuangan). Methods of collecting data through census. The number of Regency/City in Central Java are 35. But the data consists of 33 of Regency/City In Central Java from 2008 to 2012. Total of samples are 165. Karanganyar Regency and Sukoharjo Regency were not included as samples of this research because they didn’t report the data of actual of local government budget to Directorate General of Fiscal Balance in 2009.The model used in this research is multiple regressions. The independent variables are Local Tax and Retribution Receipt, the dependent variable is Local Government Original Receipt. The research findings show that Local Tax and Retribution give the significant impact partially and simultaneusly on Local Government Original Receipt at real level 5 percent. All independent variables explain 91,90 percent of the revenue variability while the rest 8,10 percent is explained by other variables.Keywords: Local Tax, Retribution, and Local Government Original Receipt

Materialism and Green Purchase Intention: A Study of Urban Vietnamese Consumers

2017 ◽  
pp. 89-106 ◽  
Author(s):  
Mai Nguyen Thi Tuyet ◽  
Hung Nguyen Vu ◽  
Linh Nguyen Hoang ◽  
Minh Nguyen Hoang
Keyword(s):  
Conceptual Framework ◽  
Survey Data ◽  
Purchase Intention ◽  
Behavioral Control ◽  
Subjective Norm ◽  
Perceived Behavioral Control ◽  
Policy Makers ◽  
Tpb Model ◽  
Research Findings ◽  
The Impact

This study focuses on examining the impact of three components of materialism on green purchase intention for urban consumers in Vietnam, an emerging economy. An extended Theory of Planned Behavior (TPB) is applied as the conceptual framework for this study. The hypotheses are empirically tested using survey data obtained from consumers in Hanoi, the capital of Vietnam. The regression results show support for most of our hypotheses. The findings indicate that two out of three facets of materialism are significant predictors of green purchase intention. Specifically, success is found to be negatively related to purchase intention, while happiness is related positively to the intention. All three antecedents in the TPB model, including attitude towards green purchase, subjective norm, and perceived behavioral control are also found to have positive impacts on purchase intention. The research findings are discussed and implications for managers and policy makers are provided.

Microstructural and Mechanical Behaviour Evaluation of Mg-Al-Zn Alloy Friction Stir Welded Joint

2020 ◽  
Vol 17 (3) ◽  
pp. 8150-8159
Author(s):  
Kulwant Singh ◽  
Gurbhinder Singh ◽  
Harmeet Singh
Keyword(s):  
Heat Treatment ◽  
Friction Stir Welding ◽  
Magnesium Alloys ◽  
Mechanical Performance ◽  
Fuel Efficiency ◽  
Research Work ◽  
Grain Structure ◽  
Tensile Fracture ◽  
Friction Stir ◽  
The Impact

The weight reduction concept is most effective to reduce the emissions of greenhouse gases from vehicles, which also improves fuel efficiency. Amongst lightweight materials, magnesium alloys are attractive to the automotive sector as a structural material. Welding feasibility of magnesium alloys acts as an influential role in its usage for lightweight prospects. Friction stir welding (FSW) is an appropriate technique as compared to other welding techniques to join magnesium alloys. Field of friction stir welding is emerging in the current scenario. The friction stir welding technique has been selected to weld AZ91 magnesium alloys in the current research work. The microstructure and mechanical characteristics of the produced FSW butt joints have been investigated. Further, the influence of post welding heat treatment (at 260 °C for 1 h) on these properties has also been examined. Post welding heat treatment (PWHT) resulted in the improvement of the grain structure of weld zones which affected the mechanical performance of the joints. After heat treatment, the tensile strength and elongation of the joint increased by 12.6 % and 31.9 % respectively. It is proven that after PWHT, the microhardness of the stir zone reduced and a comparatively smoothened microhardness profile of the FSW joint obtained. No considerable variation in the location of the tensile fracture was witnessed after PWHT. The results show that the impact toughness of the weld joints further decreases after post welding heat treatment.

The Impact of Internal Work Environment on the Retention of Healthcare Providers at Turaif General Hospital

2019 ◽  
Vol 10 (12) ◽  
pp. 1183-1199
Author(s):  
Mohammed Alrouili ◽  
Keyword(s):  
Work Environment ◽  
General Hospital ◽  
Professional Growth ◽  
Healthcare Providers ◽  
Entire Study ◽  
Internal Work ◽  
Research Findings ◽  
Study Population ◽  
The Right ◽  
The Impact

This study attempted to identify the impact of internal work environment on the retention of healthcare providers at Turaif General Hospital in the Kingdom of Saudi Arabia. In particular, the study aimed to identify the dimensions of work circumstances, compensation, and relationship with colleagues, professional growth, and the level of healthcare providers’ retention. In order to achieve the study goals, the researcher used the descriptive analytical approach. The researcher used the questionnaire as the study tool. The study population comprised all the healthcare providers at Turaif General Hospital. Questionnaires were distributed to the entire study sample that consisted of 220 individuals. The number of questionnaires valid for study was 183 questionnaires. The research findings were as follows: the participants’ estimate of the work circumstances dimension was high (3.64), the participants’ estimate of the compensation dimension was moderate (3.32), the participants’ estimate of the relationship with colleagues dimension was high (3.62), the participants’ estimate of the professional growth dimension was weak (2.39), and the participants’ estimate of healthcare providers’ retention level was intermediate (2.75). Accordingly, the researcher’s major recommendations are: the need to create the right atmosphere for personnel in hospitals, the interest of the hospital to provide the appropriate conditions for the staff in terms of the physical and moral aspects for building the work adjustment in the staff, and conducting training courses and educational lectures for personnel in hospitals on how to cope with the work pressures.

IC & OI The impact of intellectual capital on organizational innovation

2020 ◽  
Vol 6 (7) ◽  
pp. 1257-1265
Author(s):  
Fouad El-Gamal
Keyword(s):  
Intellectual Capital ◽  
Middle Managers ◽  
Organizational Innovation ◽  
Sustainable Competitive Advantage ◽  
Dominant Dimension ◽  
Structural Capital ◽  
Corporate Innovation ◽  
Research Findings ◽  
The Impact ◽  
Depth Interviews

Intellectual capital can generate value for organizations and improve organizational innovation. This study aims to investigate the effects of intellectual capital on corporate innovation. Mixed research methodology approach has been used by combining both qualitative and quantitative analysis to explore and empirical examine the research model. The targeted population of interest is the licensed pharmaceutical manufactures, 90 organizations in the Egyptian pharmaceutical industry throughout its three main sectors (11 public, 70 local private and 9 MNCs). Statistical analyses are employed based on the questionnaires gathered from 39 pharmaceutical manufactures’ companies (44% response rate). In addition, sixty-three “63” in depth interviews have been conducted with both top and middle managers. The research findings indicate that all dimensions of intellectual capital (human, structural, and relational capital) have positive significant effects on organizational innovation of pharmaceutical manufactures’ companies. The study clarifies that the most dominant dimension is structural capital, which provides the largest and strongest support to pharmaceutical manufactures’ companies. The deep realization of the importance intellectual capital and its impact on innovation helps leaders to adopt accurate system to run organizational innovation in a better way, which lead to sustainable competitive advantage for organizations.

KONFLIK DAN KINERJA KARYAWAN

2018 ◽  
Vol 3 (3) ◽  
pp. 431-440
Author(s):  
Santi Retno Sari
Keyword(s):  
Leadership Style ◽  
Structural Equation ◽  
Employee Performance ◽  
Equation Modeling ◽  
Managerial Practices ◽  
Research Findings ◽  
Job Levels ◽  
The Impact ◽  
The Relationship ◽  
Practical Implications

The purpose of this paper is to examine the relationships to which leadership style (task and relations oriented leadership) moderate the impact of conflict on employee performance. Data were collected from 92 employees in different job levels. Partial least squares variance-based structural equation modeling (PLS-SEM) was used to test the relationship in the models. The results showed that task and relation conflict was associated with employee performance. The research findings also showed that leadership styles moderated the relationship between conflict and employee performance. This study offers implications for managerial practices. Practical implications and suggestions described in the paper Keywords: leadership style, conflict, performance.

Serving the People in Long Beach, California: Advancing Justice for Southeast Asian Youth through Community University Research Partnerships

2019 ◽  
Vol 16 (1-2) ◽  
pp. 1-34
Author(s):  
R. Varisa Patraporn
Keyword(s):  
Asian American ◽  
Research Work ◽  
Community Based Participatory Research ◽  
Youth Empowerment ◽  
Long Beach ◽  
Structured Interviews ◽  
Research Partnerships ◽  
Community Needs ◽  
The People ◽  
The Impact

Khmer Girl’s in Action is a nonprofit that successfully utilizes community-based participatory research (CBPR) with university partners to create social change for youth in Long Beach, CA. Based on semi-structured interviews and content analysis of news articles, I explore the impact and sustainability of this research work and the research partnerships. Findings highlight impacts such as youth empowerment, heightened awareness around community needs, policy change, and CBPR curriculum improvements in the field as impacts. Sustainability requires integrating research into program funding, utilizing a tailored training curriculum, building on community members prior relationships, and selecting partners that share common goals, levels of commitment, and flexibility. As funders demand more data to justify community needs, understanding more examples of such work in the Asian American community will be useful for informing future partnerships.

Impacto de las tecnologías de la información y las comunicaciones: Una mirada en la Educación Superior

2017 ◽  
Vol 1 (6) ◽  
Author(s):  
Karina Virginia Mero Suárez ◽  
Edwin Joao Merchán Carreño ◽  
Ana Del Rocío Fernández Torres ◽  
Narcisa María Crespo Torres
Keyword(s):  
Higher Education ◽  
Information Technology ◽  
Research Work ◽  
Field Research ◽  
Research Problem ◽  
Research Report ◽  
Educación Superior ◽  
Educational Design ◽  
Educacion Superior ◽  
The Impact

El artículo aborda la necesidad de la creatividad que se impone en la era actual del conocimiento y la importancia que  constituyen las tecnologías como herramientas indispensables en todas las esferas de la vida. En Trabajo toma como campo investigativo los cambios que se llevan a cabo en esta esfera en la Universidad Estatal del Sur de Manabí y la Universidad Técnica de Babahoyo, Ecuador, donde se toman como objeto el proceso de enseñanza aprendizaje en la Educación Superior. El objetivo de la investigación fue comunicar el impacto de las Tecnologías de la Información y las Comunicaciones en las Universidades, donde se hace énfasis en el nuevo rol de los docentes y su nuevo desempeño de facilitadores del aprendizaje en los educandos a través en los nuevos escenarios mediados por las tecnologías. Para el desarrollo exitoso de esta memoria investigativa se   usó como metodología instrumentos que se basaron fundamentalmente en documentos referativos que ayudaron a justificar el problema de investigación, el cual consistía fundamentalmente en el impacto de las nuevos  dispositivos tecnológicos y su utilidad en los centros de altos estudios del país. Se concluyó que las Tecnologías de la Información y Comunicación son herramientas indispensables en la docencia y al mismo tiempo la forma de intervenir en el diseño educativo que nos llevan a explorar nuevos métodos docentes en los escenarios educativos mediados por estas. Se constató además que estas herramientas favorecen satisfactoriamente al proceso si se tiene una buena preparación por parte del docente.   Palabras clave: Herramientas tecnológicas, universidades, formación, docencia universitaria, proceso de enseñanza – aprendizaje Impact of information technology and communications: a look at higher education  Abstract The article states the need of the creativity that prevails in the current era of knowledge and the importance that technologies constitute in all spheres of life. In field research work it takes as changes take place in this area in Southern State University of Manabí and the Technical University of Babahoyo, Ecuador, where they are taken as an object the process of learning in higher education. The aim of the research was to communicate the impact of Information Technology and Communications in the universities, where the emphasis is on the new role of teachers and their new performance of facilitators of learning in students through the new scenarios mediated by technologies. For the successful development of this research report it was used as a methodology instruments based mainly on referative documents that helped to justify the research problem, which consisted mainly of the impact of new technological devices and their use in the centers of higher learning in the country. It was concluded that information technology and communication are indispensable tools in teaching and at the same time how to intervene in the educational design that lead us to explore new teaching methods in educational settings mediated by these. It was further found that these tools successfully promote the process if there is a good preparation by the teacher.

An Energy Efficient Spectrum Aware Routing for Cognitive Radio Networks (CRNs)

2020 ◽  
Vol 10 ◽  
Author(s):  
Dileep Reddy Bolla ◽  
Jijesh J J ◽  
Mahaveer Penna ◽  
Shiva Shankar
Keyword(s):  
Cognitive Radio ◽  
Spectrum Sensing ◽  
Cognitive Radio Networks ◽  
Energy Efficient ◽  
Research Work ◽  
Spectrum Management ◽  
Residual Energy ◽  
Radio Networks ◽  
Traffic Load ◽  
The Impact

Back Ground/ Aims:: Now-a-days in the Wireless Communications some of the spectrum bands are underutilized or unutilized; the spectrum can be utilized properly by using the Cognitive Radio Techniques using the Spectrum Sensing mechanisms. Objectives:: The prime objective of the research work carried out is to achieve the energy efficiency and to use the spectrum effectively by using the spectrum management concept and achieve better throughput, end to end delay etc., Methods:: The detection of the spectrum hole plays a vital role in the routing of Cognitive Radio Networks (CRNs). While detecting the spectrum holes and the routing, sensing is impacted by the hidden node issues and exposed node issues. The impact of sensing is improved by incorporating the Cooperative Spectrum Sensing (CSS) techniques. Along with these issues the spectrum resources changes time to time in the routing. Results:: All the issues are addressed with An Energy Efficient Spectrum aware Routing (EESR) protocol which improves the timeslot and the routing schemes. The overall network life time is improved with the aid of residual energy concepts and the overall network performance is improved. Conclusion:: The proposed protocol (EESR) is an integrated system with spectrum management and the routing is successfully established to communication in the network and further traffic load is observed to be balanced in the protocol based on the residual energy in a node and further it improves the Network Lifetime of the Overall Network and the Individual CR user, along with this the performance of the proposed protocol outperforms the conventional state of art routing protocols.

Sign in / Sign up

Export Citation Format

Share Document