scholarly journals Characterisation of Arabica Coffee Pulp - Hay from Kintamani - Bali as Prospective Biogas Feedstocks

2018 ◽  
Vol 164 ◽  
pp. 01039 ◽  
Author(s):  
Roy Hendroko Setyobudi ◽  
Satriyo Krido Wahono ◽  
Praptiningsih Gamawati Adinurani ◽  
Ahmad Wahyudi ◽  
Wahyu Widodo ◽  
...  
Keyword(s):  
Anaerobic Fermentation ◽  
Raw Materials ◽  
Raw Material ◽  
Arabica Coffee ◽  
Coffee Pulp ◽  
Preservation Technology ◽  
Volatile Solids ◽  
Coffee Pulp Waste ◽  
Alternative Solutions

The huge amount of coffee pulp waste is an environmental problem. Anaerobic fermentation is one of the alternative solutions. However, availability of coffee pulp does not appear for year-round, whereas biogas needs continuous feedstocks for digester stability. This research uses coffee pulp from Arabica Coffee Factory at Mengani, Kintamani, Bali–Indonesia. The coffee pulp was transformed into coffee pulp-hay product by sun drying for preservations to extend the raw materials through the year. Characterization of coffee pulp-hay was conducted after to keep for 15 mo for review the prospect as biogas feedstocks. Several parameters were analyzed such as C/N ratio, volatile solids, carbohydrate, protein, fat, lignocellulose content, macro-micro nutrients, and density. The review results indicated that coffee pulp-hay is prospective raw material for biogas feedstock. This well-proven preservation technology was able to fulfill the continuous supply. Furthermore, some problems were found in the recent preliminary experiment related to the density and fungi growth in the conventional laboratory digester. Further investigation was needed to implement the coffee pulp – hay as biogas feedstocks.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

scholarly journals A Tale of Two Tiles: Characterization of Floor Tiles from the Nineteenth-Century Akko Tower Shipwreck (Israel)

Coatings ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1091
Author(s):  
Alexandra Inberg ◽  
Dana Ashkenazi ◽  
Yishai Feldman ◽  
Omri Dvir ◽  
Deborah Cvikel
Keyword(s):  
Secondary Ion Mass Spectrometry ◽  
Raw Materials ◽  
Type A ◽  
Raw Material ◽  
Brown Pigment ◽  
Blue Color ◽  
Type B ◽  
Yellow Color ◽  
Floor Tiles

Fragments of decorated floor tiles were retrieved from the Akko Tower shipwreck, Israel. Most tiles were made of bright brown fired clay with a white glaze decorated with colored stenciled motifs (Type A); and others consisted of a red-brown fired clay body, coated with a brown pigment covered with transparent brown glaze (Type B). This study aimed to characterize the two tile types; to reveal information concerning the manufacturing process; and to determine the origin of their raw material. A multidisciplinary approach was used, including light microscopy, SEM-EDS, electron probe microanalysis with wavelength-dispersive X-ray spectroscopy (EPMA-WDS), XRD, Raman spectroscopy, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) analyses. The characterization of both tile types demonstrated the use of different raw materials. The Type A tiles were covered with tin-opacified majolica glaze and colored with various mixtures of pigments. The blue color was due to pigment rich in cobalt; the yellow color was due to Naples yellow and lead-tin yellow I minerals; and the green, orange, and brown colors were all prepared by mixing the Naples yellow pigment with different minerals. These majolica glaze tiles were probably manufactured in Sicily. The brown coating of the Type B tiles was due to pigment rich in lead and iron minerals. These tiles were produced with different manufacturing processes, and apparently made in France.

QUALIDADE DO CALDO PARA PRODUÇÃO DE ETANOL EM CULTIVARES DE SORGO SACARINO SOB ADUBAÇÃO NITROGENADA

2017 ◽  
Vol 16 (3) ◽  
pp. 388
Author(s):  
CRISTÓBAL SOTO SOLANO ◽  
NIRALDO JOSÉ PONCIANO ◽  
ROGÉRIO FIGUEIREDO DAHER ◽  
RAFAEL AUGUSTO DA COSTA ◽  
PAULO MARCELO DE SOUZA ◽  
...  
Keyword(s):  
Ethanol Production ◽  
Nitrogen Fertilization ◽  
Ethanol Yield ◽  
Raw Materials ◽  
Raw Material ◽  
Maximum Value ◽  
Total Reducing Sugars ◽  
Nitrogen Rates

 RESUMO - O sorgo sacarino tem potencial de uso como fonte de matéria-prima para a produção de bioetanol. Objetivou-se, com este estudo, analisar o efeito da adubação nitrogenada de cobertura na qualidade do caldo para produção de etanol de quatro cultivares de sorgo sacarino. O experimento foi conduzido em Campos dos Goytacazes- RJ, de janeiro a maio de 2014. Foram estudadas quatro cultivares de sorgo sacarino: BRS 506, BRS 508, BRS 509 e BRS 511 e cinco de doses de nitrogênio (0, 80, 160, 240 e 320 Kg ha-1), aplicadas aos 25 e 45 dias após semeadura. Os resultados mostraram que valor Brix, açúcares redutores totais, açúcares totais recuperáveis, volume do caldo e rendimento de etanol foram afetados pela adubação nitrogenada. Para todas as características, o valor máximo foi obtido pela dose de 240 kg de N ha-1. Entre as cultivares, a BRS 506 mostrou-se superior em produção de caldo e rendimento de etanol. Enquanto a BRS 511 destacou-se nos atributos ART e ATR, e a cultivar BRS 508 sobressaiu-se no valor Brix. A cultivar BRS 506 apresentou melhor resultado combinado, com maior volume de caldo e rendimento de etanol com as doses de 204 e 212 kg N ha-1, respectivamente. Palavras-chave: biocombustíveis, rendimento de álcool carburante, atributos industriais, caracterização da matéria prima, genótipos. QUALITY OF BROTH FOR ETHANOL PRODUCTION IN CULTIVARS OF SACARINE SORGHUM UNDER NITROGEN FERTILIZATION  ABSTRACT - Sweet sorghum has potential as a source of raw material for the production of bioethanol. The objective of this study was to analyze the effect of nitrogen topdressing on the quality of the juice for ethanol production from four cultivars of sorghum. The experiment was conducted in Campos, State of Rio de Janeiro, Brazil, from January to May 2014. Four cultivars of sorghum: BRS 506, BRS 508, BRS 509 and BRS 511 were studied, and five nitrogen rates (0, 80, 160, 240 and 320 kg ha-1), applied to 25 and 45 days after sowing. The results showed that the value Brix, total reducing sugars, total recoverable sugars, broth volume and ethanol yield were affected by nitrogen fertilization. For all features, the maximum value was obtained for the dose of 240 kg N ha-1. Among cultivars, BRS 506 was superior in production of broth and ethanol yield. BRS 511 stood out in the attributes ART and ATR, and BRS 508, in value Brix. BRS 506 had better combined result of higher volume of juice and ethanol yield with doses of 204 and 212 kg N ha-1, respectively Keywords: biofuels, fuel ethanol output, industrial attributes, characterization of raw materials, genotypes.   

scholarly journals Investigations of quartz raw materials from the locality of Rekovac muncipality

2019 ◽  
Vol 73 (4) ◽  
pp. 265-274
Author(s):  
Slavica Mihajlovic ◽  
Zivko Sekulic ◽  
Jovica Stojanovic ◽  
Vladan Kasic ◽  
Iroslav Sokic ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Physical Properties ◽  
Quartz Sand ◽  
Raw Materials ◽  
Construction Materials ◽  
Size Fraction ◽  
Point Of View ◽  
Raw Material ◽  
Potential Applications

Quality of raw materials, including quartz sand and quartzite, varies from one deposit to another. Furthermore, the material quality determines in which industrial branches it can be used after certain preparation processes. Potential applications of quartz raw materials are: in the construction and refractory industry, ceramics and glass industry, then in metallurgy, foundry and also in production of water treatment filters. Geological investigations of the central Serbia region, in the Rekovac municipality, resulted in identification of occurrence of quartz sand ("Ursula") and quartzite ("Velika Krusevica"). Preliminary laboratory tests and characterization of the quartz sand size fraction -0.63+0.1 mm confirmed the possibility of applying this size fraction in the construction materials industry, while the quartzite can be used in refractory, glass and metallurgy industries. After determining the geological reserve of quartz sand "Ursula" and quartzite "Velika Krusevica", detailed investigations are required. Quality conditions from the aspect of chemical composition and physical properties of quartz sand and quartzite are mostly clearly defined by a special standard for this purpose. On the other hand, there are also application areas where standards does not exist, but users define their quality conditions. This example is with the application of quartz sand in the production of water glass. Chemical composition as well is not always the determining factor for the application of quartz raw material. For example, for quartz sand used for sandblasting, grain form is essential. From the economic analysis point of view, the prices of quartz raw materials vary depending on their chemical and physical properties. After all, what needs to be pointed out is the fact that these raw materials are very widespread in nature and that their exploitation is quite simple. After the raw material is excavated, it is stored and further sieved, washed, dried and processed according to customer requirements. All of these processes are cheaper than preparing, for example, limestone, and significaly cheaper than preparation of metal ores.

scholarly journals Synthesis and characterization of innovative insulation materials

2018 ◽  
Vol 149 ◽  
pp. 01078
Author(s):  
Aggeliki Skaropoulou ◽  
Afroditi Ntziouni ◽  
Dimitris Kioupis ◽  
Sotiris Tsivilis ◽  
Glikeria Kakali
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Synthesis And Characterization ◽  
Insulation Material ◽  
Foaming Agent ◽  
Insulation Materials ◽  
Major Disadvantage ◽  
Reinforcing Agent ◽  
By Products

Insulation elements are distinguished in inorganic fibrous and organic foamed materials. Foamed insulation materials are of great acceptance and use, but their major disadvantage is their flammability. In case of fire, they tend to transmit the flame producing toxic gases. In this paper, the synthesis and characterization of innovative inorganic insulation materials with properties competitive to commercial is presented. Their synthesis involves the mixing of inorganic raw material and water with reinforcing agent or/and foaming agent leading to the formation of a gel. Depending on raw materials nature, the insulation material is produced by freeze drying or ambient drying techniques of the gel. The raw material used are chemically benign and abundantly available materials, or industrial by-products and the final products are non-toxic and, in some cases, non-flammable. Their density and thermal conductivity was measured and found 0.02-0.06 g/cm3 and 0.03-0.04 W/mK, respectively.

Production of Foundry Filters Using Al2O3 from the Al-Anodizing Process

2010 ◽  
Vol 62 ◽  
pp. 119-124 ◽  
Author(s):  
Graziela G. de Moraes ◽  
Bianca G. Oliveira ◽  
Cristina Siligardi ◽  
Murilo Daniel de Mello Innocentini ◽  
Amir A.M. Oliveira Jr. ◽  
...  
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Raw Material ◽  
Industrial Processes ◽  
High Alumina ◽  
Secondary Products ◽  
Ceramic Filters ◽  
Application Potential ◽  
Aluminum Anodizing

The manufacturing and materials transformation industries generate residues, which do not always have an adequate ecological destination. In many cases, however, these secondary products can be directly re-used as raw materials in other industrial processes. In this context, this article presents the characterization of the sludge generated in the aluminum anodizing process and emphasizes the application potential of this residue as a raw material for the production of industrial ceramic filters. Results show that the high alumina contents (89-96 wt%) and composition constancy, as well as the low particle size (~1 m) after calcination and milling, render this residue a suitable raw material to produce alumina filters with optimized properties for casting engineering metal components with better performance.

scholarly journals BIOTECHNOLOGY OF ALCOHOLIC FERMENTATION WITH YEAST RECIRCULATION

2019 ◽  
Vol 13 (3) ◽  
Author(s):  
L. Levandovsky ◽  
O. Vitriak ◽  
M. Demichkovska
Keyword(s):  
Alcoholic Fermentation ◽  
Anaerobic Fermentation ◽  
Raw Materials ◽  
Initial Period ◽  
Fuel Ethanol ◽  
Raw Material ◽  
Secondary Products ◽  
Yeast Saccharomyces Cerevisiae ◽  
Industrial Environment ◽  
Materials Used

In recent decades, there has been a tendency in the world to increase ethanol production significantly in order to solve energy problems, that is, to use it as a biofuel. The factors determining the production cost of targeted biotechnological products include the output of these products from the raw materials used. One of the modern and effective ways to intensify alcoholic fermentation and reduce the cost of fuel ethanol is yeast recirculation. The research objects were: raw material (sugarbeet molasses), molasses wort, yeast Saccharomyces cerevisiae of the strain M-5, fermented wash and its distillates. In the raw materials, intermediate products, and fermented wash, the techno-chemical parameters recommended by the current technology regulations for obtaining spirit from molasses have been determined. Acoholic fermentation was carried out in an industrial environment, in a battery of series-connected fermentors. Recirculation of yeast was carried out by separating it from the final stage of fermentation, concentrating it on the separator, and introducing it into the first fermentor. The experimental data obtained prove that for wort fermentation, it is effective to use yeast that recirculates in the anaerobic stage. It has been established that the alcohol-forming power of recycled yeast increases as the yeast adapts to the environment in which it has been staying for a long time. The yeast becomes more active biochemically, with more efficient metabolism. Its need for continuously cultured biomass is reduced, the share of aerobically assimiliated sugars decreases, and, consequently, the losses during yeast generation are fewer. At the same time, accelerating the initial period of anaerobic fermentation helps inhibit the biosynthesis of glycerol, the formation of which consumes the largest amount of sugar among all the secondary products. The parameters of molasses wort fermentation, with yeast biomass recirculating, have been determined in an industrial environment. It has been established that the alcohol output from the raw materials increases as the synthesis of secondary metabolic products weakens. The advantages of this fermentation method will be used in further studies, namely when fermenting molasses wort, with an increased concentration of dry matter, in order to reduce the specific heat energy consumption in production and to make it cheaper. The developed biotechnology of alcohol can be usefully employed to produce fuel ethanol, and increasing its production will contribute to Ukraine’s energy self-sufficience.

scholarly journals Chert from the Vegamián Formation: A new raw-material supply source in the Cantabrian Mountains (NW Spain) during prehistory

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
Diego Herrero-Alonso ◽  
Antonio Tarriño-Vinagre ◽  
Ana Neira-Campos ◽  
Natividad Fuertes-Prieto
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Cantabrian Mountains ◽  
Nw Spain ◽  
Supply Source ◽  
Geochemical Characterization ◽  
Material Supply ◽  
Different Types

This work provides the keys to the mineralogical and geochemical characterization of black chert from the Vegamián Fm. This formation crops out throughout the whole of the Cantabrian Zone (of Palaeozoic age), one of the geological zones of the Cantabrian Mountains (NW Spain). The geographical distribution of this formation is very wide, surfacing in the provinces of León, Asturias, Palencia and Cantabria.This variety of chert had been included within the group generically known as ‘black chert’, a macrogroup including different types of chert that appear in different Palaeozoic formations in the area and which share a characteristic black colour at the macroscopic level. The characterisation presented here has enabled us to distinguish it from other varieties. In this study, Vegamián chert has been divided into two different groups depending on their textural, mineralogical, geochemical and thermal propierties. Type 1, the most suitable for knapping, is characterized by high content in silica (>97%), laminated matrix and, occasionally, ghost of radiolarians.  In addition, the characteristics specific to this chert make it suitable for lithic knapping processes. To confirm its use by prehistoric populations, this chert will be compared to that found in two Mesolithic sites, the caves of La Uña and El Espertín (León, south versant of the Cantabrian Mountains), the raw materials from which are currently under study.

scholarly journals Development and proximate and microbiological characterization of Nile Tilapia (Oreochromis niloticus) protein hydrolyzed.

2014 ◽  
Vol 4 (1) ◽  
pp. 27
Author(s):  
Juliana Cristina Veit ◽  
Aldi Feiden ◽  
Marcia Luzia Ferrarezi Maluf ◽  
Wilson Rogerio Boscolo
Keyword(s):  
Nile Tilapia ◽  
Raw Materials ◽  
Nutrient Content ◽  
Biological Properties ◽  
Raw Material ◽  
Degree Of Hydrolysis ◽  
High Productivity ◽  
Nile Tilapia Oreochromis Niloticus ◽  
Health Quality

<p>The proteic hydrolysis is a technology developed with the aim of adding value, functionality and increase the use of undervalued raw materials. Through this process is possible to modify the chemical, physical and biological properties of proteins without changing their nutrient content. This study aimed to develop proteic hydrolyzed of Nile tilapia &ldquo;V&rdquo; cuts and to characterize them according to their degree of hydrolysis, chemical composition and microbiology. The results of analyses showed that the developed hydrolyzed had high productivity and appropriate degree of hydrolysis (14.8 % to H1 and 13.2 % to H2) that allow to use them both in the treatment of diseases as a flavoring in foods. In addition to presenting good composition, similar to the initial raw material, with 81.4 and 81.0 % for moisture, 13.6 and 14.6 % for protein, 3.5 and 2.8 % for lipids and 2.7 and 2.0 % for ash, respectively for H1 and H2. With relation to microbiological results, the hydrolyzed showed great health quality, well below the limits allowed by law. Therefore, the enzymatic hydrolysis proved to be an efficient process to obtain hydrolyzed proteins from a high biological value and low value raw material.</p><p>&nbsp;</p><p>DOI: <a href="http://dx.doi.org/10.14685/rebrapa.v4i1.97">http://dx.doi.org/<span>10.14685/rebrapa.v4i1.97</span></a></p>

scholarly journals Characterization of the Obsidian Used in the Chipped Stone Industry in Kendale Hecala

Quaternary ◽  
2022 ◽  
Vol 5 (1) ◽  
pp. 3
Author(s):  
Üftade Muşkara ◽  
Ayşin Konak
Keyword(s):  
Multivariate Analysis ◽  
Raw Materials ◽  
Raw Material ◽  
Chipped Stone ◽  
Cultural Organization ◽  
Lithic Industry ◽  
Southeast Anatolia ◽  
Stone Industry ◽  
Technological Analysis

Kendale Hecala is located on the Ambar River in the Upper Tigris Basin, province of Diyarbakır in Southeast Anatolia. Various raw materials, including obsidian, radiolarite, chert, jasper, chalcedony, and quartzite, were used in the lithic industry. Obsidian artefacts constitute an average of 64% of the chipped stone assemblage. Technological analysis reveals that obsidian was brought to the settlement as nodules and chipped into various tools at the settlement. Understanding the operational sequence of the lithic industry, chaîne opératoire, including the distribution of raw material from source to site, is important to demonstrate the socio-cultural organization of the settlement in Southeastern Anatolia during the Ubaid period. In order to identify source varieties, the obsidian artefacts uncovered from Ubaid layers of Kendale Hecala were analyzed by macro-observations, and the characterization of archaeological samples was performed using a handheld XRF. Multivariate analysis of the data indicates the use of obsidian from different resources at the settlement, including Nemrut Dağ, Bingöl B, and Group 3d.

Sign in / Sign up

Export Citation Format

Share Document