scholarly journals Chert from the Vegamián Formation: A new raw-material supply source in the Cantabrian Mountains (NW Spain) during prehistory

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
Diego Herrero-Alonso ◽  
Antonio Tarriño-Vinagre ◽  
Ana Neira-Campos ◽  
Natividad Fuertes-Prieto
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Cantabrian Mountains ◽  
Nw Spain ◽  
Supply Source ◽  
Geochemical Characterization ◽  
Material Supply ◽  
Different Types

This work provides the keys to the mineralogical and geochemical characterization of black chert from the Vegamián Fm. This formation crops out throughout the whole of the Cantabrian Zone (of Palaeozoic age), one of the geological zones of the Cantabrian Mountains (NW Spain). The geographical distribution of this formation is very wide, surfacing in the provinces of León, Asturias, Palencia and Cantabria.This variety of chert had been included within the group generically known as ‘black chert’, a macrogroup including different types of chert that appear in different Palaeozoic formations in the area and which share a characteristic black colour at the macroscopic level. The characterisation presented here has enabled us to distinguish it from other varieties. In this study, Vegamián chert has been divided into two different groups depending on their textural, mineralogical, geochemical and thermal propierties. Type 1, the most suitable for knapping, is characterized by high content in silica (>97%), laminated matrix and, occasionally, ghost of radiolarians.  In addition, the characteristics specific to this chert make it suitable for lithic knapping processes. To confirm its use by prehistoric populations, this chert will be compared to that found in two Mesolithic sites, the caves of La Uña and El Espertín (León, south versant of the Cantabrian Mountains), the raw materials from which are currently under study.

scholarly journals The Escalada Formation: Characterization of a potential chert supply source in the Cantabrian Mountains (NW Spain) during prehistory.

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
M. Natividad Fuertes-Prieto ◽  
Esperanza Fernández-Martínez ◽  
Fernando Gómez-Fernández ◽  
Eduardo Alonso-Herrero ◽  
Diego Herrero Alonso ◽  
...  
Keyword(s):  
Raw Materials ◽  
Geographical Location ◽  
Microscopic Analysis ◽  
Major Elements ◽  
Matrix Composition ◽  
Archaeological Sites ◽  
Cantabrian Mountains ◽  
Nw Spain ◽  
Supply Source ◽  
Thin Sections

A study of the chert nodules found in the Escalada Formation (Carboniferous, Ponga region, Cantabrian Zone) was carried out as a means to characterise a number of lithic raw materials found in several prehistoric sites of the Cantabrian Mountains (NW Spain). This study comprises fieldwork aimed at locating the outcrops and obtaining samples. Some selected samples from two localities were used for both petrological (macroscopic and microscopic analyses from thin sections) and geochemical (X-ray fluorescence and powder diffraction) analysis. The macroscopic study shows a rather homogeneus coloration and a conchoidal fracture although two extreme types of cherts with a variety of intermediate forms can be differentiated according to the matrix composition. The microscopic analysis shows a high heterogeneity in carbonate versus silica percentage and gentle differences in some other features such as type of silica, origin of carbonates, occurrence of organic matter and type of skeletal components. The results of several geochemical analysis suggest that there are not geochemical features neither in the major elements nor in the traces that allows us to clearly distinguish between the analysed samples. All these studies allow us to define the main features of these chert nodules and to establish several types and varieties among them. Those varieties with high percentage of silica and with a more homogeneous matrix are the most suitable samples for knapping. These results together with the study of the geological and geographical location of archaeological sites suggest that the nodules from the Escalada Formation likely were lithic material supply sources used in knapping activitiesWhen aiming to demonstrate the use of these materials at archaeological sites the sole macroscopic analysis of the pieces does not suffice; further analyses, such as those involving thin sections, are necessary. The absence of chert from Escalada Formation in some Mesolithic sites in the area was confirmed via these additional analyses.

scholarly journals Pembuatan dan Karakterisasi Dissolving Pulp Serat Panjang dari Bambu Duri (Bambusa blumeana)

2018 ◽  
Vol 8 (01) ◽  
pp. 21 ◽  
Author(s):  
Chandra Apriana Purwita ◽  
Susi Sugesty
Keyword(s):  
Fiber Length ◽  
Raw Materials ◽  
Dissolving Pulp ◽  
Raw Material ◽  
Cellulose Content ◽  
Different Types ◽  
Good Potential ◽  
Long Fibers

Preparation and Characterization of Long Fiber Dissolving Pulp from Spiny Bamboo (Bambusa blumeana)The need for long fiber dissolving pulp in Indonesia can only be met from imports. Bamboo is a nonwood plant and known as source of long fiber. This research aims to study the potential of spiny bamboo to be used as raw material for producing long fiber dissolving pulp. This research was conducted using two different types of raw materials preparation to produce bamboo chip and decorticated bamboo. The pulping process is carried out by pre-hydrolysis kraft and bleaching performed with two different bleaching sequences, i.e Do ED1 D2 and Do EpD1 D2 . Based on the experimental results, spiny bamboo has good potential to be used as raw material for dissolving pulp. Spiny bamboo belongs to long fibers with an average fiber length of 2.46 mm. The dissolving quality depends on the preparation of the raw material and the bleaching sequence. The yield of spiny bamboo dissolving pulp ranged from 37.97 - 40.76% with alpha cellulose content of 94.88 - 98.67%, and viscosity of 16.43 - 25.75 cP. Decorticated bamboo with bleaching sequence of Do EpD1 D2 produced the highest quality of dissolving pulp with the highest brightness and alpha cellulose were 89.61% ISO and 98.67%, respectively.AbstrakKebutuhan dissolving pulp serat panjang di Indonesia hanya dapat dipenuhi melalui impor. Bambu adalah tanaman nonkayu dan dikenal sebagai sumber serat panjang. Penelitian ini bertujuan untuk mempelajari potensi bambu duri untuk dijadikan bahan baku pembuatan dissolving pulp serat panjang. Penelitian ini dilakukan dengan dua jenis persiapan bahan baku yang berbeda untuk menghasilkan serpih bambu dan bambu dekortikasi. Proses pemasakan dilakukan dengan proses pra-hidrolisis kraft dan pemutihan dilakukan dengan dua urutan pemutihan yang berbeda, yaitu  DoED1D2 dan DoEpD1D2. Berdasarkan hasil penelitian, bambu duri memiliki potensi yang baik untuk digunakan sebagai bahan baku pembuatan dissolving pulp. Bambu duri tergolong serat panjang dengan panjang serat rata-rata 2,46 mm. Kualitas dissolving pup yang dihasilkan tergantung dari persiapan bahan baku dan urutan pemutihan. Rendemen dissolving pulp bambu duri berkisar 37,97 - 40,76%, dengan kandungan selulosa alfa 94,88 - 98,67%, dan viskositas 16,43 - 25,75 cP. Bambu dekortikasi dengan urutan pemutihan DoEpD1D2 menghasilkan dissolving pulp paling unggul dengan derajat cerah dan selulosa alfa tertinggi berturut-turut 89,61 %ISO dan 98,67%.Kata kunci: dissolving pulp, bambu duri (Bambusa blumeana), serpih bambu, bambu dekortikasi, prahidrolisis kraft 

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

scholarly journals Potential of the biodegradability and characteristics of bio-plastic from microalgae residues

Algologia ◽  
2021 ◽  
Vol 31 (1) ◽  
pp. 80-92
Author(s):  
Y.C. Wong ◽  
◽  
D.N. Roma ◽  
Keyword(s):  
Human Life ◽  
Raw Material ◽  
Infrared Analysis ◽  
Drying Process ◽  
Good Resistance ◽  
Chlorella Sp ◽  
Plastic Bags ◽  
Different Types ◽  
The University

Petroleum-based plastic has been widely used in many industries. However, it takes hundreds of years to degrade and causes widespread pollution to our environment. These problems led to the invention of bioplastics, which were comprised of natural biopolymers made from starch. The production of bioplastics from food-based starches such as tapioca and corn created competition between food and bioplastic production industries. Hence, this research study focuses on producing bioplastic from microalgae residue, which is a non-food based raw material that uses four different types of plasticizers: glycerol, sorbitol, glutaraldehyde and polyethylene glycol (PEG). Microalgae species for identification were obtained from the fish pond at the University Malaysia of Kelantan, before cultivating the species for 14 days. The microalgae residues were extracted through the centrifugation process. Three species were identified under the light microscope, Chlorella sp., Scenedesmus sp. and Monoraphidium sp. The production of bioplastic involved a manual stirring method using a hotplate magnetic stirrer, followed by drying the bioplastic in an oven at 60 oC. Results obtained showed that sorbitol and glycerol from microalgae are suitable to be used as a plasticizer for the production of bioplastic, however glutaraldehyde and PEG are not suitable. Bioplastics that used PEG and glutaraldehyde became cracked and brittle after the drying process. The characterization of bioplastics includes universal tensile testing machines, Fourier-transform infrared analysis and biodegradability tests being processed//undertaken on glycerol-based and sorbitol based bioplastic. Characterization of bioplastics proved that both glycerol and sorbitol have high potential for applications in daily human life. Bioplastics which used sorbitol as a plasticizer could be used in can be applied the production of plastic goods such as toys and household items due to its good resistance toward stress and minimal flexibility. Meanwhile bioplastics which used glycerol as a plasticizer could be applied to the production of plastic bags and plastic food wrap due to its elastic and flexible nature.

The issue of "oil shrinkage" during the compounding of oils in the processes of production, collection, preparation and transportation of hydrocarbon raw materials

2021 ◽  
pp. 104-113
Author(s):  
O. P. Deryugina ◽  
E. A. Trapeznikov
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Colloidal System ◽  
Main Pipelines ◽  
Different Types ◽  
Preliminary Study ◽  
The Stability ◽  
Mixed Oil

The article discusses the issue of industrial compounding, which improves the quality of the raw materials supplied to the main pipelines. Compounding from "to compound" (English) - to mix. When mixing different types of oil obtained, "incompatibility" is possible, which is expressed in the precipitation of a solid sediment and violation of the stability of the colloidal system and due to the differing properties of oils. Attention to this problem is due to the tightening of requirements for the quality of raw materials that must comply with modern standards. The article discusses the causes of the problem of "incompatibility" of oil during compounding and effective ways of solving it, substantiates the need for a preliminary study of the properties of mixed oil in order to identify possible incompatibility of various types of oil. The standard tests for determination of incompatibility indices characterizing the ability of raw materials to mix are considered. The article substantiates the need to develop methods for diagnosing the incompatibility of oils as the most important task of modern chemical science, the solution of which will improve the quality of the raw material obtained and solve many technological problems in the compounding process.

scholarly journals A Tale of Two Tiles: Characterization of Floor Tiles from the Nineteenth-Century Akko Tower Shipwreck (Israel)

Coatings ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1091
Author(s):  
Alexandra Inberg ◽  
Dana Ashkenazi ◽  
Yishai Feldman ◽  
Omri Dvir ◽  
Deborah Cvikel
Keyword(s):  
Secondary Ion Mass Spectrometry ◽  
Raw Materials ◽  
Type A ◽  
Raw Material ◽  
Brown Pigment ◽  
Blue Color ◽  
Type B ◽  
Yellow Color ◽  
Floor Tiles

Fragments of decorated floor tiles were retrieved from the Akko Tower shipwreck, Israel. Most tiles were made of bright brown fired clay with a white glaze decorated with colored stenciled motifs (Type A); and others consisted of a red-brown fired clay body, coated with a brown pigment covered with transparent brown glaze (Type B). This study aimed to characterize the two tile types; to reveal information concerning the manufacturing process; and to determine the origin of their raw material. A multidisciplinary approach was used, including light microscopy, SEM-EDS, electron probe microanalysis with wavelength-dispersive X-ray spectroscopy (EPMA-WDS), XRD, Raman spectroscopy, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) analyses. The characterization of both tile types demonstrated the use of different raw materials. The Type A tiles were covered with tin-opacified majolica glaze and colored with various mixtures of pigments. The blue color was due to pigment rich in cobalt; the yellow color was due to Naples yellow and lead-tin yellow I minerals; and the green, orange, and brown colors were all prepared by mixing the Naples yellow pigment with different minerals. These majolica glaze tiles were probably manufactured in Sicily. The brown coating of the Type B tiles was due to pigment rich in lead and iron minerals. These tiles were produced with different manufacturing processes, and apparently made in France.

Mineralogical and geochemical characterization of archaeological ceramics from the 16th century El Badi Palace, Morocco

Clay Minerals ◽  
2018 ◽  
Vol 53 (3) ◽  
pp. 459-470
Author(s):  
Mouhssin El Halim ◽  
Lahcen Daoudi ◽  
Meriam El Ouahabi ◽  
Valérie Rousseau ◽  
Catherine Cools ◽  
...  
Keyword(s):  
Sixteenth Century ◽  
Chemical Characterization ◽  
Raw Material ◽  
Maximum Temperature ◽  
X Ray Diffraction ◽  
Archaeological Ceramics ◽  
Geochemical Characterization ◽  
X Ray ◽  
Firing Tests

ABSTRACTTextural, mineralogical and chemical characterization of archaeological ceramics (zellige) from El Badi Palace (Marrakech, Morocco), the main Islamic monument from the Saadian period (sixteenth century), has been performed to enhance restoration and to determine the technology of manufacturing. A multi-analytical approach based on optical and scanning electron microscopy, cathodoluminescence, X-ray fluorescence and X-ray diffraction was used. Re-firing tests on ceramic supports were also performed to determine the firing temperatures used by the Saadian artisans. A calcareous clay raw material was used to manufacture these decorative ceramics. The sherds were fired at a maximum temperature of 800°C in oxidizing atmosphere. The low firing temperature for ‘zellige’ facilitates cutting of the pieces, but also causes fragility in these materials due to the absence of vitreous phases.

scholarly journals Optimizing the Raw Material Supply Chain of the Wood Biomass Power Generation Industry for Different Stakeholders’ Benefits: An Analysis of Inner Mongolia, China

2020 ◽  
Vol 12 (5) ◽  
pp. 1887
Author(s):  
Yang Bai ◽  
He Yang ◽  
Yu Zhao ◽  
Min Zhang ◽  
Jinyuan Qin ◽  
...  
Keyword(s):  
Power Generation ◽  
Supply Chain ◽  
Inner Mongolia ◽  
Raw Materials ◽  
Raw Material ◽  
Western China ◽  
Mixed Integer ◽  
Utilization Rate ◽  
Wood Biomass ◽  
Material Supply

A large number of sand shrubs have been planted in western China, especially in Inner Mongolia. Sand shrubs produce a large amount of stump residue, and wood biomass power generation enterprises that use stump residue as raw materials have emerged in Wushen Banner and other areas. In this paper, the Mixed Integer Linear Programming (MILP) model is used to optimize the raw material supply chain of forest biomass power generation enterprises. Optimizations with different objectives represent the choices of different stakeholders. The optimization results are listed as follows. (1) The self-issuance behavior of enterprises is inconsistent with the enterprise behavior required by social planners; (2) When social planners only pay attention to environmental benefits, the utilization rate of raw materials in towns located far from a power plant will be greatly reduced, which is not conducive for the reuse of stump residue; (3) When social planners consider economic, environmental, and social benefits simultaneously, the utilization rate of raw materials in each town will be significantly improved, resources will be effectively utilized, and certain economic benefits will be realized; (4) It is possible to reduce the difficulty of achieving optimization goals by promoting industrial development and encouraging technological progress.

QUALIDADE DO CALDO PARA PRODUÇÃO DE ETANOL EM CULTIVARES DE SORGO SACARINO SOB ADUBAÇÃO NITROGENADA

2017 ◽  
Vol 16 (3) ◽  
pp. 388
Author(s):  
CRISTÓBAL SOTO SOLANO ◽  
NIRALDO JOSÉ PONCIANO ◽  
ROGÉRIO FIGUEIREDO DAHER ◽  
RAFAEL AUGUSTO DA COSTA ◽  
PAULO MARCELO DE SOUZA ◽  
...  
Keyword(s):  
Ethanol Production ◽  
Nitrogen Fertilization ◽  
Ethanol Yield ◽  
Raw Materials ◽  
Raw Material ◽  
Maximum Value ◽  
Total Reducing Sugars ◽  
Nitrogen Rates

 RESUMO - O sorgo sacarino tem potencial de uso como fonte de matéria-prima para a produção de bioetanol. Objetivou-se, com este estudo, analisar o efeito da adubação nitrogenada de cobertura na qualidade do caldo para produção de etanol de quatro cultivares de sorgo sacarino. O experimento foi conduzido em Campos dos Goytacazes- RJ, de janeiro a maio de 2014. Foram estudadas quatro cultivares de sorgo sacarino: BRS 506, BRS 508, BRS 509 e BRS 511 e cinco de doses de nitrogênio (0, 80, 160, 240 e 320 Kg ha-1), aplicadas aos 25 e 45 dias após semeadura. Os resultados mostraram que valor Brix, açúcares redutores totais, açúcares totais recuperáveis, volume do caldo e rendimento de etanol foram afetados pela adubação nitrogenada. Para todas as características, o valor máximo foi obtido pela dose de 240 kg de N ha-1. Entre as cultivares, a BRS 506 mostrou-se superior em produção de caldo e rendimento de etanol. Enquanto a BRS 511 destacou-se nos atributos ART e ATR, e a cultivar BRS 508 sobressaiu-se no valor Brix. A cultivar BRS 506 apresentou melhor resultado combinado, com maior volume de caldo e rendimento de etanol com as doses de 204 e 212 kg N ha-1, respectivamente. Palavras-chave: biocombustíveis, rendimento de álcool carburante, atributos industriais, caracterização da matéria prima, genótipos. QUALITY OF BROTH FOR ETHANOL PRODUCTION IN CULTIVARS OF SACARINE SORGHUM UNDER NITROGEN FERTILIZATION  ABSTRACT - Sweet sorghum has potential as a source of raw material for the production of bioethanol. The objective of this study was to analyze the effect of nitrogen topdressing on the quality of the juice for ethanol production from four cultivars of sorghum. The experiment was conducted in Campos, State of Rio de Janeiro, Brazil, from January to May 2014. Four cultivars of sorghum: BRS 506, BRS 508, BRS 509 and BRS 511 were studied, and five nitrogen rates (0, 80, 160, 240 and 320 kg ha-1), applied to 25 and 45 days after sowing. The results showed that the value Brix, total reducing sugars, total recoverable sugars, broth volume and ethanol yield were affected by nitrogen fertilization. For all features, the maximum value was obtained for the dose of 240 kg N ha-1. Among cultivars, BRS 506 was superior in production of broth and ethanol yield. BRS 511 stood out in the attributes ART and ATR, and BRS 508, in value Brix. BRS 506 had better combined result of higher volume of juice and ethanol yield with doses of 204 and 212 kg N ha-1, respectively Keywords: biofuels, fuel ethanol output, industrial attributes, characterization of raw materials, genotypes.   

scholarly journals Investigations of quartz raw materials from the locality of Rekovac muncipality

2019 ◽  
Vol 73 (4) ◽  
pp. 265-274
Author(s):  
Slavica Mihajlovic ◽  
Zivko Sekulic ◽  
Jovica Stojanovic ◽  
Vladan Kasic ◽  
Iroslav Sokic ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Physical Properties ◽  
Quartz Sand ◽  
Raw Materials ◽  
Construction Materials ◽  
Size Fraction ◽  
Point Of View ◽  
Raw Material ◽  
Potential Applications

Quality of raw materials, including quartz sand and quartzite, varies from one deposit to another. Furthermore, the material quality determines in which industrial branches it can be used after certain preparation processes. Potential applications of quartz raw materials are: in the construction and refractory industry, ceramics and glass industry, then in metallurgy, foundry and also in production of water treatment filters. Geological investigations of the central Serbia region, in the Rekovac municipality, resulted in identification of occurrence of quartz sand ("Ursula") and quartzite ("Velika Krusevica"). Preliminary laboratory tests and characterization of the quartz sand size fraction -0.63+0.1 mm confirmed the possibility of applying this size fraction in the construction materials industry, while the quartzite can be used in refractory, glass and metallurgy industries. After determining the geological reserve of quartz sand "Ursula" and quartzite "Velika Krusevica", detailed investigations are required. Quality conditions from the aspect of chemical composition and physical properties of quartz sand and quartzite are mostly clearly defined by a special standard for this purpose. On the other hand, there are also application areas where standards does not exist, but users define their quality conditions. This example is with the application of quartz sand in the production of water glass. Chemical composition as well is not always the determining factor for the application of quartz raw material. For example, for quartz sand used for sandblasting, grain form is essential. From the economic analysis point of view, the prices of quartz raw materials vary depending on their chemical and physical properties. After all, what needs to be pointed out is the fact that these raw materials are very widespread in nature and that their exploitation is quite simple. After the raw material is excavated, it is stored and further sieved, washed, dried and processed according to customer requirements. All of these processes are cheaper than preparing, for example, limestone, and significaly cheaper than preparation of metal ores.

Sign in / Sign up

Export Citation Format

Share Document