scholarly journals Using COSMOtherm to predict physicochemical properties of poly- and perfluorinated alkyl substances (PFASs)

2011 ◽  
Vol 8 (4) ◽  
pp. 389 ◽  
Author(s):  
Zhanyun Wang ◽  
Matthew MacLeod ◽  
Ian T. Cousins ◽  
Martin Scheringer ◽  
Konrad Hungerbühler
Keyword(s):  
Physicochemical Properties ◽  
Chain Length ◽  
Functional Group ◽  
Water Solubility ◽  
Consumer Products ◽  
Molecular Volume ◽  
Environmental Distribution ◽  
Wide Range ◽  
Perfluorinated Alkyl Substances ◽  
Insight Into

Environmental contextPoly- and perfluorinated alkyl substances (PFASs) include a wide range of individual compounds that are used in many consumer products, but only a few physicochemical property data are available for these chemicals. Here we provide estimates of physicochemical properties (vapour pressure, water solubility, etc.) of 130 individual PFASs derived with a quantum-chemical model. Our results provide insight into the effect of molecular structure on the properties of PFASs and a basis for estimating the environmental partitioning and fate of PFASs. AbstractRecently, there has been concern about the presence of poly- and perfluorinated alkyl substances (PFASs) in the environment, biota and humans. However, lack of physicochemical data has limited the application of environmental fate models to understand the environmental distribution and ultimate fate of PFASs. We employ the COSMOtherm model to estimate physicochemical properties for 130 individual PFASs, namely perfluoroalkyl acids (including branched isomers for C4–C8 perfluorocarboxylic acids), their precursors and some important intermediates. The estimated physicochemical properties are interpreted using structure-property relationships and rationalised with insight into molecular interactions. Within a homologous series of linear PFASs with the same functional group, both air–water and octanol–water partition coefficient increase with increasing perfluorinated chain length, likely due to increasing molecular volume. For PFASs with the same perfluorinated chain length but different functional groups, the ability of the functional group to form hydrogen bonds strongly influences the chemicals’ partitioning behaviour. The partitioning behaviour of all theoretically possible branched isomers can vary considerably; however, the predominant isopropyl and monomethyl branched isomers in technical mixtures have similar properties as their linear counterparts (differences below 0.5log units). Our property estimates provide a basis for further environmental modelling, but with some caveats and limitations.

scholarly journals Application of Dendrimers for Treating Parasitic Diseases

Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 343
Author(s):  
Veronica Folliero ◽  
Carla Zannella ◽  
Annalisa Chianese ◽  
Debora Stelitano ◽  
Annalisa Ambrosino ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Water Solubility ◽  
Parasitic Infection ◽  
Three Dimensional ◽  
Medical Knowledge ◽  
High Ratio ◽  
Molecular Volume ◽  
Parasitic Infections ◽  
Parasitic Diseases ◽  
Wide Range

Despite advances in medical knowledge, parasitic diseases remain a significant global health burden and their pharmacological treatment is often hampered by drug toxicity. Therefore, drug delivery systems may provide useful advantages when used in combination with conventional therapeutic compounds. Dendrimers are three-dimensional polymeric structures, characterized by a central core, branches and terminal functional groups. These nanostructures are known for their defined structure, great water solubility, biocompatibility and high encapsulation ability against a wide range of molecules. Furthermore, the high ratio between terminal groups and molecular volume render them a hopeful vector for drug delivery. These nanostructures offer several advantages compared to conventional drugs for the treatment of parasitic infection. Dendrimers deliver drugs to target sites with reduced dosage, solving side effects that occur with accepted marketed drugs. In recent years, extensive progress has been made towards the use of dendrimers for therapeutic, prophylactic and diagnostic purposes for the management of parasitic infections. The present review highlights the potential of several dendrimers in the management of parasitic diseases.

Predicting the Environmental Distribution of Compounds with Unknown Physicochemical Properties from Known Pesticide Properties

1992 ◽  
Vol 75 (5) ◽  
pp. 916-924
Author(s):  
Surya S Prasad
Keyword(s):  
Physicochemical Properties ◽  
Partition Coefficients ◽  
Water Solubility ◽  
Vapor Pressures ◽  
Water Mobility ◽  
Environmental Distribution ◽  
Worst Case ◽  
Environmental Media ◽  
Environmental Consequences ◽  
Soil Adsorption

Abstract Disposing of pesticides improperly can have environmental consequences. This study examines those properties discussed in published literature or derived from semiempirical mathematical models that are most likely to affect pesticides' environmental distribution, then assesses their migration between environmental media (soil, water, air, and biota). In particular, it examines how pesticide characteristics such as water solubility, molecular weight, bioconcentration, volatility, and soil adsorption affect soil-to-water mobility, water-to-air dissipation, and water-to-biota accumulation when present in the environmental medium of preferred residence. The study concludes that chemicals that have low water solubilities tend to adsorb to soil, those that have low vapor pressures tend to dissipate slowly from water, and those that have relatively high octanol-to-water partition coefficients or low water solubility have a high potential for bioconcentration. Under these situations, environmental restoration might best be achieved by removal of the contamination at the source. By drawing analogies from these findings, researchers should be able to predict the mobility of pesticides belonging to a particular category or family of compounds with unknown physicochemical properties, determine the harm that might result from their distribution under worst-case scenarios, and recommend ways to restore the environment. Received

QSPR Models for the Physicochemical Properties of Polychlorinated Naphthalene Congeners

2013 ◽  
Vol 726-731 ◽  
pp. 440-443
Author(s):  
Jian Qing Zhu ◽  
Wei Wang ◽  
Hui Ying Xu
Keyword(s):  
Physicochemical Properties ◽  
Water Solubility ◽  
Molecular Volume ◽  
Structure Property ◽  
Polychlorinated Naphthalenes ◽  
Structure Property Relationships ◽  
Quantitative Structure Property Relationships ◽  
Pressure Water ◽  
Quantum Chemical Parameter ◽  
Polychlorinated Naphthalene

Based on quantitative structureproperty relationship (QSPR) of organic compounds, geometrical optimization and quantum chemical parameter calculations have been performed at the B3LYP/6-31G* level of theory for 75 polychlorinated naphthalenes (PCNs). A number of statistically-based parameters have been obtained. Relationship between the physicochemical properties of polychlorinated naphthalene compounds (n-octanol/air partition coefficient, sub-cooled liquid vapor pressure, water solubility) and the structural descriptors have been established by multiple linear regression (MLR) method. The results show that the molecular volume (Vmc), dipolar moment (μ), and the energy of lowest unoccupied molecular orbital (ELUMO), together with the quantity derived from electrostatic potential () can be well used to express the quantitative structure-property relationships of polychlorinated naphthalene compounds. The models constructed have good robustness and high predictive capability.

Sentence-Based Experience Logging in New Hearing Aid Users

2020 ◽  
Vol 29 (3S) ◽  
pp. 631-637
Author(s):  
Katja Lund ◽  
Rodrigo Ordoñez ◽  
Jens Bo Nielsen ◽  
Dorte Hammershøi
Keyword(s):  
Hearing Aid ◽  
Patient Experiences ◽  
Online Tool ◽  
Rehabilitation Process ◽  
Hearing Rehabilitation ◽  
Clinical Observations ◽  
Hearing Aid Use ◽  
Wide Range ◽  
Insight Into ◽  
Shed Light

Purpose The aim of this study was to develop a tool to gain insight into the daily experiences of new hearing aid users and to shed light on aspects of aided performance that may not be unveiled through standard questionnaires. Method The tool is developed based on clinical observations, patient experiences, expert involvement, and existing validated hearing rehabilitation questionnaires. Results An online tool for collecting data related to hearing aid use was developed. The tool is based on 453 prefabricated sentences representing experiences within 13 categories related to hearing aid use. Conclusions The tool has the potential to reflect a wide range of individual experiences with hearing aid use, including auditory and nonauditory aspects. These experiences may hold important knowledge for both the patient and the professional in the hearing rehabilitation process.

Physicochemical Characterization and Antinociceptive Effect of β-cyclodextrin/Lippia pedunculosa Essential Oil in Mice

2018 ◽  
Vol 18 (9) ◽  
pp. 797-807 ◽  
Author(s):  
Paula dos Passos Menezes ◽  
Francielly de Oliveira Araujo ◽  
Tatianny Araujo Andrade ◽  
Igor Araujo Santos Trindade ◽  
Heitor Gomes de Araujo-Filho ◽  
...  
Keyword(s):  
Essential Oil ◽  
Physicochemical Properties ◽  
Water Solubility ◽  
Therapeutic Potential ◽  
Biological Activities ◽  
Antinociceptive Effect ◽  
Physicochemical Characterization ◽  
Good Tool ◽  
Main Challenge ◽  
Higher Temperature

Background: Some research studies have shown that Lippia pedunculosa essential oil (EOLP) has interesting biological activities. However, its low water solubility is the main challenge to achieve its therapeutic potential. In this context, Cyclodextrins (CDs) have been widely used in order to overcome this problem due to your capability to improve the physicochemical properties of drugs. Objective: In this perspective, the main goal of this study was to investigate how the improvement of the physicochemical properties of inclusion complexes (EOLP and β-CD) enhance the antinociceptive effect in mice. Methods: To achieve that, we prepared samples by Physical Mixture (PM), Paste Complexation (PC) and Slurry Complexation (SC) methods, followed by their physicochemical characterization. In addition, it was evaluated if the use of β-CD enhances the antinociceptive effect of EOLP in mice. Results: The analysis showed that rotundifolone (72.02%) was the major compound of EOLP and we found out based on DSC results that β-CD protected it from oxidation. In addition, TG techniques demonstrated that the best inclusion methods were PC and SC, due to their greater weight loss (10.8 and 11.6%, respectively) in the second stage (171-312°C), indicating that more complexed oil was released at the higher temperature than oil free. Other characteristics, such as changes in the typical crystalline form, and reduced particle size were observed by SEM and laser diffraction, respectively. The SC was the most effective complexation method, once the presence of rotundifolone was detected by FTIR. Based on that, SC method was used in all mice tests. In this regard, the number of paw licks was reduced for both compounds (all doses), but EOLP was more effective in reducing the nociceptive behavior. Conclusion: Therefore, CDs seem not to be a good tool to enhance the pharmacological properties of EOs rich in peroxide compounds such as rotundifolone.

Pharmaceutical Co-Crystals - Design, Development and Applications

2020 ◽  
Vol 10 (3) ◽  
pp. 169-184
Author(s):  
Rachna Anand ◽  
Arun Kumar ◽  
Arun Nanda
Keyword(s):  
Physicochemical Properties ◽  
Crystal Engineering ◽  
Pharmacological Action ◽  
Physicochemical Characteristics ◽  
Research Area ◽  
Dissolution Profile ◽  
Design Development ◽  
Drug Molecule ◽  
Wide Range ◽  
Major Factors

Background: Solubility and dissolution profile are the major factors which directly affect the biological activity of a drug and these factors are governed by the physicochemical properties of the drug. Crystal engineering is a newer and promising approach to improve physicochemical characteristics of a drug without any change in its pharmacological action through a selection of a wide range of easily available crystal formers. Objective: The goal of this review is to summarize the importance of crystal engineering in improving the physicochemical properties of a drug, methods of design, development, and applications of cocrystals along with future trends in research of pharmaceutical co-crystals. Co-crystallization can also be carried out for the molecules which lack ionizable functional groups, unlike salts which require ionizable groups. Conclusion: Co-crystals is an interesting and promising research area amongst pharmaceutical scientists to fine-tune the physicochemical properties of drug materials. Co-crystallization can be a tool to increase the lifecycle of an older drug molecule. Crystal engineering carries the potential of being an advantageous technique than any other approach used in the pharmaceutical industry. Crystal engineering offers a plethora of biopharmaceutical and physicochemical enhancements to a drug molecule without the need of any pharmacological change in the drug.

scholarly journals Rheology and Water Absorption Properties of Alginate–Soy Protein Composites

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1807
Author(s):  
Estefanía Álvarez-Castillo ◽  
José Manuel Aguilar ◽  
Carlos Bengoechea ◽  
María Luisa López-Castejón ◽  
Antonio Guerrero
Keyword(s):  
Soy Protein ◽  
Water Solubility ◽  
Divalent Cations ◽  
Low Cost ◽  
Soy Protein Isolate ◽  
Protein Isolate ◽  
Guluronic Acid ◽  
Wide Range ◽  
Anionic Polysaccharides ◽  
Porous Matrices

Composite materials based on proteins and carbohydrates normally offer improved water solubility, biodegradability, and biocompatibility, which make them attractive for a wide range of applications. Soy protein isolate (SPI) has shown superabsorbent properties that are useful in fields such as agriculture. Alginate salts (ALG) are linear anionic polysaccharides obtained at a low cost from brown algae, displaying a good enough biocompatibility to be considered for medical applications. As alginates are quite hydrophilic, the exchange of ions from guluronic acid present in its molecular structure with divalent cations, particularly Ca2+, may induce its gelation, which would inhibit its solubilization in water. Both biopolymers SPI and ALG were used to produce composites through injection moulding using glycerol (Gly) as a plasticizer. Different biopolymer/plasticizer ratios were employed, and the SPI/ALG ratio within the biopolymer fraction was also varied. Furthermore, composites were immersed in different CaCl2 solutions to inhibit the amount of soluble matter loss and to enhance the mechanical properties of the resulting porous matrices. The main goal of the present work was the development and characterization of green porous matrices with inhibited solubility thanks to the gelation of alginate.

scholarly journals Engineering the Interface between Inorganic Nanoparticles and Biological Systems through Ligand Design

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1001
Author(s):  
Rui Huang ◽  
David C. Luther ◽  
Xianzhi Zhang ◽  
Aarohi Gupta ◽  
Samantha A. Tufts ◽  
...  
Keyword(s):  
Organic Synthesis ◽  
Molecular Design ◽  
Biological Systems ◽  
Ligand Design ◽  
Inorganic Nanoparticles ◽  
Organic Ligands ◽  
Biological Applications ◽  
Wide Range ◽  
Insight Into

Nanoparticles (NPs) provide multipurpose platforms for a wide range of biological applications. These applications are enabled through molecular design of surface coverages, modulating NP interactions with biosystems. In this review, we highlight approaches to functionalize nanoparticles with ”small” organic ligands (Mw < 1000), providing insight into how organic synthesis can be used to engineer NPs for nanobiology and nanomedicine.

scholarly journals Thermo- and Photoresponsive Behaviors of Dual-Stimuli-Responsive Organogels Consisting of Homopolymers of Coumarin-Containing Methacrylate

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 329
Author(s):  
Seidai Okada ◽  
Eriko Sato
Keyword(s):  
Functional Group ◽  
Solution Temperature ◽  
Stimuli Responsive ◽  
Critical Solution Temperature ◽  
Equilibrium Degree ◽  
Stimuli Responsive Polymers ◽  
Responsive Polymers ◽  
Dual Functional ◽  
Wide Range ◽  
Increasing Temperature

Coumarin-containing vinyl homopolymers, such as poly(7-methacryloyloxycoumarin) (P1a) and poly(7-(2′-methacryloyloxyethoxy)coumarin) (P1b), show a lower critical solution temperature (LCST) in chloroform, which can be controlled by the [2 + 2] photochemical cycloaddition of the coumarin moiety, and they are recognized as monofunctional dual-stimuli-responsive polymers. A single functional group of monofunctional dual-stimuli-responsive polymers responds to dual stimuli and can be introduced more uniformly and densely than those of dual-functional dual-stimuli-responsive polymers. In this study, considering a wide range of applications, organogels consisting of P1a and P1b, i.e., P1a-gel and P1b-gel, respectively, were synthesized, and their thermo- and photoresponsive behaviors in chloroform were investigated in detail. P1a-gel and P1b-gel in a swollen state (transparent) exhibited phase separation (turbid) through a temperature jump and reached a shrunken state (transparent), i.e., an equilibrium state, over time. Moreover, the equilibrium degree of swelling decreased non-linearly with increasing temperature. Furthermore, different thermoresponsive sites were photopatterned on the organogel through the photodimerization of the coumarin unit. The organogels consisting of homopolymers of coumarin-containing methacrylate exhibited unique thermo- and photoresponsivities and behaved as monofunctional dual-stimuli-responsive organogels.

scholarly journals Gas Damping in Capacitive MEMS Transducers in the Free Molecular Flow Regime

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2566
Author(s):  
Boris A. Boom ◽  
Alessandro Bertolini ◽  
Eric Hennes ◽  
Johannes F. J. van den Brand
Keyword(s):  
Flow Regime ◽  
Gas Diffusion ◽  
Diffusion Time ◽  
Molecular Flow ◽  
Free Molecular Flow ◽  
Simple Analytical Model ◽  
Gas Damping ◽  
Wide Range ◽  
Capacitive Mems ◽  
Insight Into

We present a novel analysis of gas damping in capacitive MEMS transducers that is based on a simple analytical model, assisted by Monte-Carlo simulations performed in Molflow+ to obtain an estimate for the geometry dependent gas diffusion time. This combination provides results with minimal computational expense and through freely available software, as well as insight into how the gas damping depends on the transducer geometry in the molecular flow regime. The results can be used to predict damping for arbitrary gas mixtures. The analysis was verified by experimental results for both air and helium atmospheres and matches these data to within 15% over a wide range of pressures.

Sign in / Sign up

Export Citation Format

Share Document