scholarly journals When losing your nuts increases your reproductive success: sandalwood (Santalum spicatum) nut caching by the woylie (Bettongia penicillata)

2015 ◽  
Vol 21 (3) ◽  
pp. 243 ◽  
Author(s):  
Marie Murphy ◽  
Kay Howard ◽  
Giles E. St J. Hardy ◽  
Bernard Dell
Keyword(s):  
Recruitment Rate ◽  
Primary Method ◽  
Seed Disperser ◽  
The Past ◽  
Successful Recruitment ◽  
Bettongia Penicillata ◽  
Santalum Spicatum ◽  
Study Sites ◽  
Germinated Seeds

To regenerate sandalwood (Santalum spicatum) stands in south-western Australia it is necessary to understand the complex relationship between woylies (Bettongia penicillata ogilbyi) and sandalwood. Sandalwood requires a seed disperser for successful recruitment and in the past the critically endangered woylie played an important role in dispersing and caching seeds, but it is not clear whether this mutualistic and antagonistic relationship is beneficial to regeneration efforts. An enclosure in a woodland and 46Scandium-labelled seeds, enabled study of the in situ predation of seeds, caching, the fate of cached seeds, the detection of cached seeds and predation of germinated seeds. Woylies preferentially cached sandalwood, then S. acuminatum seeds, before any interest was shown in Acacia acuminata and Gastrolobium microcarpum seeds, which were virtually all eaten in situ. Of a further 500 radiolabelled and individually numbered sandalwood seeds deployed, 42.2% were eaten in situ, 20.8% had an unknown fate and 37% were cached, with some seeds being recached up to four times. After nine months, only four cached seeds remained undisturbed. Olfaction appeared to be the primary method of cache detection. To examine the recruitment rate of cached seeds, the fate of 89 transplanted sandalwood seedlings at two study sites was followed. After one month 38% were intact and growing, but half of the transplanted seedlings were dug up and the remaining endosperm was eaten in situ or taken away. The results highlight the potential of providing seed supplies, including sandalwood seeds and seeds of their hosts, to seed-dispersal marsupials for passive ecosystem repair.

scholarly journals Distribution, population structure, and management of a rare sandalwood (Santalum yasi, Santalaceae) in Fiji and Tonga

2015 ◽  
Vol 21 (1) ◽  
pp. 27 ◽  
Author(s):  
Ryan D. Huish ◽  
Tevita Faka'osi ◽  
Heimuli Likiafu ◽  
Joseva Mateboto ◽  
Katherine H. Huish
Keyword(s):  
Population Data ◽  
Size Class ◽  
Natural Distribution ◽  
Field Surveys ◽  
The Past ◽  
Adaptive Comanagement ◽  
Adult Trees ◽  
In The Wild ◽  
Study Sites

The aromatic heartwood of Santalum yasi has been harvested extensively in Fiji and Tonga over the past two centuries for international trade in the medicinal, perfume, and incense industry and other cultural purposes. Field surveys and a review of historic and modern documents reveal a sparse and scattered distribution and indicate that the natural distribution of S. yasi has fluctuated over time, even declining to local extinction in the wild in some areas, while S. album has been introduced and naturalisation of S. yasi × S. album hybrids is evident. Population data collected along transects in three in situ S. yasi populations show discontinuous size-class structures, indicating regenerative stress. The population densities at study sites ranged from 19 to 63 adult trees (≥5 cm dbh) per hectare and less than two heartwood-bearing trees (≥15 cm dbh) per hectare. Though S. yasi trees may attain up to 40 cm dbh, no trees greater than 23 cm dbh were found in any of the studied populations. Low density and small size of adult trees and human-induced bole damage are suggestive of frequent, premature, and defensive harvesting patterns and indicate the need for ongoing adaptive comanagement in recognition of underlying economic and sociocultural pressures.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

In situ microprobe quantitation of inorganic particle burden in paraffin sections of lung tissue

1988 ◽  
Vol 46 ◽  
pp. 990-991
Author(s):  
Jerrold L. Abraham
Keyword(s):  
Lung Tissue ◽  
Quantitative Information ◽  
Particulate Material ◽  
Paraffin Sections ◽  
Tissue Samples ◽  
Qualitative And Quantitative ◽  
The Past ◽  
Quantitative Analyses ◽  
Data Result

Inorganic particulate material of diverse types is present in the ambient and occupational environment, and exposure to such materials is a well recognized cause of some lung disease. To investigate the interaction of inhaled inorganic particulates with the lung it is necessary to obtain quantitative information on the particulate burden of lung tissue in a wide variety of situations. The vast majority of diagnostic and experimental tissue samples (biopsies and autopsies) are fixed with formaldehyde solutions, dehydrated with organic solvents and embedded in paraffin wax. Over the past 16 years, I have attempted to obtain maximal analytical use of such tissue with minimal preparative steps. Unique diagnostic and research data result from both qualitative and quantitative analyses of sections. Most of the data has been related to inhaled inorganic particulates in lungs, but the basic methods are applicable to any tissues. The preparations are primarily designed for SEM use, but they are stable for storage and transport to other laboratories and several other instruments (e.g., for SIMS techniques).

An atomic-resolution microscope study of Al contracts on GaAs

1986 ◽  
Vol 44 ◽  
pp. 726-727
Author(s):  
Z. Liliental-Weber ◽  
C. Nelson ◽  
R. Ludeke ◽  
R. Gronsky ◽  
J. Washburn
Keyword(s):  
High Speed ◽  
Schottky Contacts ◽  
Detailed Knowledge ◽  
The Past ◽  
Semiconductor Interfaces ◽  
Deposited Metal ◽  
Microwave Applications ◽  
Free Interfaces ◽  
Potential Use

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions

scholarly journals 3D-Bioprinting Strategies Based on In Situ Bone-Healing Mechanism for Vascularized Bone Tissue Engineering

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 287
Author(s):  
Ye Lin Park ◽  
Kiwon Park ◽  
Jae Min Cha
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Healing ◽  
Critical Size ◽  
Current Knowledge ◽  
3D Bioprinting ◽  
The Past ◽  
Regeneration Processes

Over the past decades, a number of bone tissue engineering (BTE) approaches have been developed to address substantial challenges in the management of critical size bone defects. Although the majority of BTE strategies developed in the laboratory have been limited due to lack of clinical relevance in translation, primary prerequisites for the construction of vascularized functional bone grafts have gained confidence owing to the accumulated knowledge of the osteogenic, osteoinductive, and osteoconductive properties of mesenchymal stem cells and bone-relevant biomaterials that reflect bone-healing mechanisms. In this review, we summarize the current knowledge of bone-healing mechanisms focusing on the details that should be embodied in the development of vascularized BTE, and discuss promising strategies based on 3D-bioprinting technologies that efficiently coalesce the abovementioned main features in bone-healing systems, which comprehensively interact during the bone regeneration processes.

scholarly journals Modelling the Quality of Bathing Waters in the Adriatic Sea

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1525
Author(s):  
Christian Ferrarin ◽  
Pierluigi Penna ◽  
Antonella Penna ◽  
Vedrana Spada ◽  
Fabio Ricci ◽  
...  
Keyword(s):  
Adriatic Sea ◽  
Management Tool ◽  
Negative Consequences ◽  
Sea Temperature ◽  
Bathing Water Directive ◽  
Bathing Waters ◽  
Diffusion Dynamics ◽  
Study Sites

The aim of this study is to develop a relocatable modelling system able to describe the microbial contamination that affects the quality of coastal bathing waters. Pollution events are mainly triggered by urban sewer outflows during massive rainy events, with relevant negative consequences on the marine environment and tourism and related activities of coastal towns. A finite element hydrodynamic model was applied to five study areas in the Adriatic Sea, which differ for urban, oceanographic and morphological conditions. With the help of transport-diffusion and microbial decay modules, the distribution of Escherichia coli was investigated during significant events. The numerical investigation was supported by detailed in situ observational datasets. The model results were evaluated against water level, sea temperature, salinity and E. coli concentrations acquired in situ, demonstrating the capacity of the modelling suite in simulating the circulation in the coastal areas of the Adriatic Sea, as well as several main transport and diffusion dynamics, such as riverine and polluted waters dispersion. Moreover, the results of the simulations were used to perform a comparative analysis among the different study sites, demonstrating that dilution and mixing, mostly induced by the tidal action, had a stronger effect on bacteria reduction with respect to microbial decay. Stratification and estuarine dynamics also play an important role in governing microbial concentration. The modelling suite can be used as a beach management tool for improving protection of public health, as required by the EU Bathing Water Directive.

scholarly journals Understanding ion-induced assembly of cellulose nanofibrilllar gels through shear-free mixing and in situ scanning-SAXS

2021 ◽  
Author(s):  
Tomas Rosén ◽  
Ruifu Wang ◽  
HongRui He ◽  
Chengbo Zhan ◽  
Shirish Chodankar ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Building Block ◽  
Cellulose Nanofibrils ◽  
Advanced Materials ◽  
The Past

During the past decade, cellulose nanofibrils (CNFs) have shown tremendous potential as a building block to fabricate new advanced materials that are both biocompatible and biodegradable. The excellent mechanical properties...

Calibration Methods to Circumvent Unknown Component Spectra for Quantitative in situ Raman Monitoring of Co-Polymerisation Reaction

2021 ◽  
Author(s):  
Wendy Rusli ◽  
Pavan Kumar Naraharisetti ◽  
Wee Chew
Keyword(s):  
Raman Spectroscopy ◽  
Reaction Monitoring ◽  
The Past ◽  
In Situ Raman ◽  
Calibration Methods ◽  
Unknown Component

The use of Raman spectroscopy for reaction monitoring has been successfully applied over the past few decades. One complication in such usage is the applicability for quantitative reaction studies. This...

The Vyredox and Nitredox Methods of in situ Treatment of Groundwater

1988 ◽  
Vol 20 (3) ◽  
pp. 149-163 ◽  
Author(s):  
Carol Braester ◽  
Rudolf Martinell
Keyword(s):  
Water Treatment ◽  
Surface Water ◽  
Traditional Method ◽  
Treatment Method ◽  
Nitrate Treatment ◽  
The Past ◽  
The World ◽  
Nitrate And Nitrite ◽  
Iron And Manganese

Nearly one fifth of all water used in the world is obtained from groundwater. The protection of water has become a high priority goal. During the last decades pollution of water has become more and more severe. Today groundwater is more and more used in comparison with surface water. Recently we have seen accidents, which can pollute nearly all surface water very quickly. Generally the groundwater is easier to protect, as well as cheaper to purify, and above all it is of better quality than the surface water. During the past two decades, alternatives to the traditional method of treating the water in filters have been developed, that is in situ water treatment i.e. the VYREDOX and NITREDOX methods. The most common problem regarding groundwater is too high content of iron and manganese, which can be reduced with the VYREDOX method. In some areas today there are severe problems with pollution by hydrocarbons and nitrate as well, and with modification of the VYREDOX treatment method it is used for hydrocarbon and nitrate treatment as well. The method to reduce the nitrate and nitrite is known as the NITREDOX method.

Did Ground Cover Change Over Geologic Time?

2000 ◽  
Vol 6 ◽  
pp. 171-182 ◽  
Author(s):  
Ben A. LePage ◽  
Hermann W. Pfefferkorn
Keyword(s):  
Fossil Record ◽  
Ground Cover ◽  
The Other ◽  
Detailed Account ◽  
Geologic Time ◽  
The Past ◽  
Other Hand ◽  
Plant Fossil

When one hears the term “ground cover,” one immediately thinks of “grasses.” This perception is so deep-seated that paleobotanists even have been overheard to proclaim that “there was no ground cover before grasses.” Today grasses are so predominant in many environments that this perception is perpetuated easily. On the other hand, it is difficult to imagine the absence or lack of ground cover prior to the mid-Tertiary. We tested the hypothesis that different forms of ground cover existed in the past against examples from the Recent and the fossil record (Table 1). The Recent data were obtained from a large number of sources including those in the ecological, horticultural, and microbiological literature. Other data were derived from our knowledge of Precambrian life, sedimentology and paleosols, and the plant fossil record, especially in situ floras and fossil “monocultures.” Some of the data are original observations, but many others are from the literature. A detailed account of these results will be presented elsewhere (Pfefferkorn and LePage, in preparation).

Sign in / Sign up

Export Citation Format

Share Document