scholarly journals Actuation and locomotion driven by moisture in paper made with natural pollen

2020 ◽  
Vol 117 (16) ◽  
pp. 8711-8718 ◽  
Author(s):  
Ze Zhao ◽  
Youngkyu Hwang ◽  
Yun Yang ◽  
Tengfei Fan ◽  
Juha Song ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Water Absorption ◽  
Material Properties ◽  
Processing Conditions ◽  
Structure And Properties ◽  
Rapid Exchange ◽  
Wide Range ◽  
Contractile Stress ◽  
Hydrodynamic Effects ◽  
Integrated Responses

Here we describe the development of a humidity-responsive sheet of paper that is derived solely from natural pollen. Adaptive soft material components of the paper exhibit diverse and well-integrated responses to humidity that promote shape reconfiguration, actuation, and locomotion. This mechanically versatile and nonallergenic paper can generate a cyclically high contractile stress upon water absorption and desorption, and the rapid exchange of water drives locomotion due to hydrodynamic effects. Such dynamic behavior can be finely tuned by adjusting the structure and properties of the paper, including thickness, surface roughness, and processing conditions, analogous to those of classical soapmaking. We demonstrate that humidity-responsive paper-like actuators can mimic the blooming of the Michelia flower and perform self-propelled motion. Harnessing the material properties of bioinspired systems such as pollen paper opens the door to a wide range of sustainable, eco-friendly, and biocompatible material innovation platforms for applications in sensing, actuation, and locomotion.

Observation of Surface Structure of Kyo-Kawara (Ceramic Material for Roof Component) Fabricated by Traditional Skillful Technique

2011 ◽  
Author(s):  
Masahisa Asada ◽  
Masaki Sakata ◽  
Takeshi Shiono ◽  
Yuka Takai ◽  
Akihiko Goto ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Water Absorption ◽  
Surface Structure ◽  
Ceramic Material ◽  
Surface Characteristics ◽  
Structure And Properties ◽  
Roof Tile ◽  
The Relationship ◽  
Made In

Kyo-gawara is one of traditional crafts, one of Japanese roof tile made in Kyoto by using traditional techniques. The characteristics of Kyo-gawara is gloss on surface available in “Migaki” process. Migaki process is that craftsman strokes half-dry surface with paddle one by one. Number of products that a craftsman has to finish the process is decided. In previous study, investigation about the relationship between number of times of Migaki process and surface properties of Kyo-gawara cannot be seen [1]. In this study, specimens having different number of time of Migaki process (none, once, twice) were used, surface structure and properties were analyzed, and investigation about the relationship between Migaki process and surface characteristics was performed. Measurement items are surface roughness (Ra), contact angle, water absorption. As a result, surface roughness tended to decrease, and with increase of number of times of Migaki process. From the result of measurement of contact angle and water absorption, it was clarified that Migaki could improve waterproofness.

Understanding of surface roughness of wood based on analysis its structure and density

2020 ◽  
Vol 111 ◽  
pp. 27-31
Author(s):  
Agnieszka Jankowska
Keyword(s):  
Surface Roughness ◽  
Wood Density ◽  
Wood Species ◽  
Structure And Properties ◽  
Important Indicator ◽  
Wide Range ◽  
Wood Fibres ◽  
Wood Section ◽  
Anatomical Difference ◽  
Measurement Direction

Understanding of surface roughness of wood based on analysis its structure and density. The main aim of presented paper was to investigate the influence the wood density and anatomical details on surface roughness. The scope of study included samples from ten different species of wood (mainly tropical) because of wide range of density and anatomical difference. The results allow to conclude that the roughness of tested wood species demonstrated variation, depending on the wood section and the measurement direction. In general, radial sections showed higher roughness than tangential sections due to interlocked fibres in tested wood species (fibres cut in various ways on the radial section of the wood). Roughness measured perpendicular to the wood fibres were twice as high as those measured parallel to the grain. Wood density was not an important indicator determining surface roughness for tested wood species. The determining element for the roughness measured across the fibres was the diameter of the vessels. Further research is advisable due to the enormous variability of the structure and properties of wood.

Structure and properties of compact articles from high-alloyed iron powder with adding of boron nitride

2020 ◽  
pp. 39-48
Author(s):  
B. O. Bolshakov ◽  
◽  
R. F. Galiakbarov ◽  
A. M. Smyslov ◽  
◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Boron Nitride ◽  
Grain Boundary ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Operating Conditions ◽  
Structure And Properties ◽  
Steam Turbines ◽  
Friction Forces ◽  
Wide Range

The results of the research of structure and properties of a composite compact from 13 Cr – 2 Мо and BN powders depending on the concentration of boron nitride are provided. It is shown that adding boron nitride in an amount of more than 2% by weight of the charge mixture leads to the formation of extended grain boundary porosity and finely dispersed BN layers in the structure, which provides a high level of wearing properties of the material. The effect of boron nitride concentration on physical and mechanical properties is determined. It was found that the introduction of a small amount of BN (up to 2 % by weight) into the compacts leads to an increase in plasticity, bending strength, and toughness by reducing the friction forces between the metal powder particles during pressing and a more complete grain boundary diffusion process during sintering. The formation of a regulated structure-phase composition of powder compacts of 13 Cr – 2 Mо – BN when the content of boron nitride changes in them allows us to provide the specified physical and mechanical properties in a wide range. The obtained results of studies of the physical and mechanical characteristics of the developed material allow us to reasonably choose the necessary composition of the powder compact for sealing structures of the flow part of steam turbines, depending on their operating conditions.

scholarly journals On the Relevance of Volumetric Energy Density in the Investigation of Inconel 718 Laser Powder Bed Fusion

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 538 ◽  
Author(s):  
Fabrizia Caiazzo ◽  
Vittorio Alfieri ◽  
Giuseppe Casalino
Keyword(s):  
Surface Roughness ◽  
Energy Density ◽  
Process Parameters ◽  
Vickers Hardness ◽  
Powder Bed Fusion ◽  
Processing Conditions ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Fractional Density ◽  
Experimental Variation

Laser powder bed fusion (LPBF) can fabricate products with tailored mechanical and surface properties. In fact, surface texture, roughness, pore size, the resulting fractional density, and microhardness highly depend on the processing conditions, which are very difficult to deal with. Therefore, this paper aims at investigating the relevance of the volumetric energy density (VED) that is a concise index of some governing factors with a potential operational use. This paper proves the fact that the observed experimental variation in the surface roughness, number and size of pores, the fractional density, and Vickers hardness can be explained in terms of VED that can help the investigator in dealing with several process parameters at once.

The role of gas flow distributions on CO2 mineralization within monolithic cemented composites: coupled CFD-factorial design approach

2021 ◽  
Author(s):  
Iman Mehdipour ◽  
Gabriel Falzone ◽  
Dale Prentice ◽  
Narayanan Neithalath ◽  
Dante Simonetti ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Factorial Design ◽  
Material Properties ◽  
Gas Flow ◽  
Design Approach ◽  
Processing Conditions ◽  
Gas Processing ◽  
Co2 Mineralization

Optimizing the spatial distribution of contacting gas and the gas processing conditions enhances CO2 mineralization reactions and material properties of carbonate-cementitious monoliths.

scholarly journals Influence of Applied Bias Voltage on the Composition, Structure, and Properties of Ti:Si-Codoped a-C:H Films Prepared by Magnetron Sputtering

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Jinlong Jiang ◽  
Qiong Wang ◽  
Yubao Wang ◽  
Zhang Xia ◽  
Hua Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Magnetron Sputtering ◽  
Bias Voltage ◽  
Tribological Properties ◽  
Structure And Properties ◽  
Applied Bias ◽  
Applied Bias Voltage ◽  
Methane Mixture ◽  
Composition Structure

The titanium- and silicon-codoped a-C:H films were prepared at different applied bias voltage by magnetron sputtering TiSi target in argon and methane mixture atmosphere. The influence of the applied bias voltage on the composition, surface morphology, structure, and mechanical properties of the films was investigated by XPS, AFM, Raman, FTIR spectroscopy, and nanoindenter. The tribological properties of the films were characterized on an UMT-2MT tribometer. The results demonstrated that the film became smoother and denser with increasing the applied bias voltage up to −200 V, whereas surface roughness increased due to the enhancement of ion bombardment as the applied bias voltage further increased. The sp3carbon fraction in the films monotonously decreased with increasing the applied bias voltage. The film exhibited moderate hardness and the superior tribological properties at the applied bias voltage of −100 V. The tribological behaviors are correlated to the H/E or H3/E2ratio of the films.

Reactive Ion Etching Induced Surface Damage of Silicon Carbide

2005 ◽  
Vol 483-485 ◽  
pp. 765-768 ◽  
Author(s):  
Jun Hai Xia ◽  
E. Rusli ◽  
R. Gopalakrishnan ◽  
S.F. Choy ◽  
Chin Che Tin ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Reactive Ion Etching ◽  
Surface Damage ◽  
Textured Surface ◽  
Rf Power ◽  
Power Devices ◽  
Ion Etching ◽  
Maximum Value ◽  
Wide Range ◽  
Coarse Surface

Reactive ion etching of SiC induced surface damage, e.g., micromasking effect induced coarse and textured surface, is one of the main concerns in the fabrication of SiC based power devices [1]. Based on CHF3 + O2 plasma, 4H-SiC was etched under a wide range of RF power. Extreme coarse and textured etched surfaces were observed under certain etching conditions. A super-linear relationship was found between the surface roughness and RF power when the latter was varied from 40 to 160 W. A further increase in the RF power to 200 W caused the surface roughness to drop abruptly from its maximum value of 182.4 nm to its minimum value of 1.3 nm. Auger electron spectroscopy (AES) results revealed that besides the Al micromasking effect, the carbon residue that formed a carbon-rich layer, could also play a significant role in affecting the surface roughness. Based on the AES results, an alternative explanation on the origin of the coarse surface is proposed.

Calibration of Mobility and Interface Trap Parameters for High Temperature TCAD Simulation of 4H-SiC VDMOSFETs

2012 ◽  
Vol 717-720 ◽  
pp. 1101-1104 ◽  
Author(s):  
M.G. Jaikumar ◽  
Shreepad Karmalkar
Keyword(s):  
Surface Roughness ◽  
Measured Data ◽  
Interface Trap Density ◽  
Interface Trap ◽  
Material Parameters ◽  
Velocity Saturation ◽  
Physical Mechanisms ◽  
Surface Roughness Scattering ◽  
Wide Range ◽  
Tcad Simulation

4H-Silicon Carbide VDMOSFET is simulated using the Sentaurus TCAD package of Synopsys. The simulator is calibrated against measured data for a wide range of bias conditions and temperature. Material parameters of 4H-SiC are taken from literature and used in the available silicon models of the simulator. The empirical parameters are adjusted to get a good fit between the simulated curves and measured data. The simulation incorporates the bias and temperature dependence of important physical mechanisms like interface trap density, coulombic interface trap scattering, surface roughness scattering and velocity saturation.

scholarly journals Multi-stable composite twisting structure for morphing applications

2012 ◽  
Vol 468 (2141) ◽  
pp. 1230-1251 ◽  
Author(s):  
X. Lachenal ◽  
P. M. Weaver ◽  
S. Daynes
Keyword(s):  
Analytical Model ◽  
Material Properties ◽  
Degrees Of Freedom ◽  
Design Parameters ◽  
Engineering Structures ◽  
The Past ◽  
Wide Range ◽  
Morphing Structure ◽  
Low Mass ◽  
Unstable States

Conventional shape-changing engineering structures use discrete parts articulated around a number of linkages. Each part carries the loads, and the articulations provide the degrees of freedom of the system, leading to heavy and complex mechanisms. Consequently, there has been increased interest in morphing structures over the past decade owing to their potential to combine the conflicting requirements of strength, flexibility and low mass. This article presents a novel type of morphing structure capable of large deformations, simply consisting of two pre-stressed flanges joined to introduce two stable configurations. The bistability is analysed through a simple analytical model, predicting the positions of the stable and unstable states for different design parameters and material properties. Good correlation is found between experimental results, finite-element modelling and predictions from the analytical model for one particular example. A wide range of design parameters and material properties is also analytically investigated, yielding a remarkable structure with zero stiffness along the twisting axis.

Sign in / Sign up

Export Citation Format

Share Document