scholarly journals The preparation of Li7La3Zn2O12(LLZO) battery ceramic and its conductivity

2021 ◽  
Vol 2079 (1) ◽  
pp. 012017
Author(s):  
Xiaoli Zhang ◽  
Xiaoyi Zhang ◽  
Yu Yang ◽  
Jiawei Duan ◽  
Liwei Mi
Keyword(s):  
Solid Electrolytes ◽  
Low Cost ◽  
Sol Gel ◽  
Complex Method ◽  
Preparation Methods ◽  
Liquid Sintering ◽  
Field Assisted Sintering ◽  
Sintering Method ◽  
Fast Synthesis ◽  
Combustion Technique

Abstract For Li7La3Zr2O12 (LLZO) solid electrolytes, higher density usually means higher ionic conductivity. Researchers tried many preparation methods to get high density samples and at same times to realize industrial production, low cost, scalable and fast synthesis techniques. In this paper, the mainstream preparation methods of LLZO was given, as polymerized complex method, sol-gel method, field assisted sintering, combustion technique, auto-consolidation method, water-based solvent method. Among these methods, the last four methods can always increase the density to more than 93%. Especially the field assisted sintering method can make the relative density to be high as 99.8%. And all of these methods can make the ion conductivity to be higher than 1.4 × 10-4 S cm-1. Also, most of these methods introduced the Al element into LLZO to realize the liquid sintering.

scholarly journals Recent Progress in Biochar-Based Photocatalysts for Wastewater Treatment: Synthesis, Mechanisms, and Applications

2020 ◽  
Vol 10 (3) ◽  
pp. 1019 ◽  
Author(s):  
Jiali Cui ◽  
Feng Zhang ◽  
Hongyan Li ◽  
Jianguo Cui ◽  
Yatao Ren ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Low Cost ◽  
Sol Gel ◽  
Mesoporous Structure ◽  
Preparation Methods ◽  
In Situ Methods ◽  
Low Toxicity ◽  
Rich Material ◽  
Underlying Mechanisms ◽  
Pyrolysis Of Biomass

Biochar (BC) is a carbon-rich material produced from pyrolysis of biomass. In addition to its low toxicity, environmental compatibility, and low cost, BC has the desired advantages of well-developed mesoporous structure and abundant surface functional groups. In recent years, BC-based photocatalysts (BCPs) have played a significant role in many environmental fields. In this paper, we highlight the current progress and several exciting results of BCPs by focusing on their synthesis, characterization, mechanisms, and applications in wastewater treatment. Details on various preparation methods include sol–gel, hydrothermal/solvothermal, ultrasound, calcination, and in situ methods are summarized and discussed. The underlying mechanisms and the applications of BCPs for different semiconductors are reviewed. Furthermore, some future trends and potentials are outlined.

Structural, Morphological and Magnetic Characterization of Sm-substituted Ni-Zn Ferrite

2020 ◽  
Vol 10 (2) ◽  
pp. 152-156 ◽  
Author(s):  
Muhammad Hanif bin Zahari ◽  
Beh Hoe Guan ◽  
Lee Kean Chuan ◽  
Afiq Azri bin Zainudin
Keyword(s):  
Magnetic Properties ◽  
Rare Earth ◽  
Saturation Magnetization ◽  
Sol Gel ◽  
Magnetic Behavior ◽  
Rare Earth Ions ◽  
Ion Concentration ◽  
Zn Ferrite ◽  
Auto Combustion ◽  
Combustion Technique

Background: Rare earth materials are known for its salient electrical insulation properties with high values of electrical resistivity. It is expected that the substitution of rare earth ions into spinel ferrites could significantly alter its magnetic properties. In this work, the effect of the addition of Samarium ions on the structural, morphological and magnetic properties of Ni0.5Zn0.5SmxFe2-xO4 (x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) synthesized using sol-gel auto combustion technique was investigated. Methods: A series of Samarium-substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5SmxFe2-xO4 where x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by sol-gel auto-combustion technique. Structural, morphological and magnetic properties of the samples were examined through X-Ray Diffraction (XRD), Field-Emission Scanning Electron Microscope (FESEM) and Vibrating Sample Magnetometer (VSM) measurements. Results: XRD patterns revealed single-phased samples with spinel cubic structure up to x= 0.04. The average crystallite size of the samples varied in the range of 41.8 – 85.6 nm. The prepared samples exhibited agglomerated particles with larger grain size observed in Sm-substituted Ni-Zn ferrite as compared to the unsubstituted sample. The prepared samples exhibited typical soft magnetic behavior as evidenced by the small coercivity field. The magnetic saturation, Ms values decreased as the Sm3+ concentration increases. Conclusion: The substituted Ni-Zn ferrites form agglomerated particles inching towards more uniform microstructure with each increase in Sm3+ substitution. The saturation magnetization of substituted samples decreases with the increase of samarium ion concentration. The decrease in saturation magnetization can be explained based on weak super exchange interaction between A and B sites. The difference in magnetic properties between the samples despite the slight difference in Sm3+ concentrations suggests that the properties of the NiZnFe2O4 can be ‘tuned’, depending on the present need, through the substitution of Fe3+ with rare earth ions.

scholarly journals A simple approach to prepare fluorescent molecularly imprinted nanoparticles

RSC Advances ◽  
2021 ◽  
Vol 11 (13) ◽  
pp. 7732-7737
Author(s):  
Fenying Wang ◽  
Dan Wang ◽  
Tingting Wang ◽  
Yu Jin ◽  
Baoping Ling ◽  
...  
Keyword(s):  
High Performance ◽  
Low Cost ◽  
Sol Gel ◽  
Silica Sol ◽  
Simple Approach ◽  
Imprinted Polymer ◽  
Molecularly Imprinted ◽  
Low Toxicity ◽  
Good Biocompatibility ◽  
Molecularly Imprinted Nanoparticles

Fluorescent molecularly imprinted polymer (FMIP) gains great attention in many fields due to their low cost, good biocompatibility and low toxicity. Here, a high-performance FMIP was prepared based on the autocatalytic silica sol–gel reaction.

scholarly journals Synthesis and characterization of Mg–Zn ferrite based flexible microwave composites and its application as SNG metamaterial

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Md Atiqur Rahman ◽  
Mohammad Tariqul Islam ◽  
Mandeep Singh Jit Singh ◽  
Md Samsuzzaman ◽  
Muhammad E. H. Chowdhury
Keyword(s):  
Low Cost ◽  
Sol Gel ◽  
Microwave Frequency ◽  
Dielectric Substrate ◽  
Dielectric Constants ◽  
Potential Candidate ◽  
Flexible Composites ◽  
Average Grain Size ◽  
Zn Ferrite ◽  
High Flexibility

AbstractIn this article, we propose SNG (single negative) metamaterial fabricated on Mg–Zn ferrite-based flexible microwave composites. Firstly, the flexible composites are synthesized by the sol-gel method having four different molecular compositions of MgxZn(1−x)Fe2O4, which are denoted as Mg20, Mg40, Mg60, and Mg80. The structural, morphological, and microwave properties of the synthesized flexible composites are analyzed using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and conventional dielectric assessment kit (DAK) to justify their possible application as dielectric substrate at microwave frequency regime. Thus the average grain size is found from 20 to 24 nm, and the dielectric constants are 6.01, 5.10, 4.19, and 3.28, as well as loss tangents, are 0.002, 0.004, 0.006, and 0.008 for the prepared Mg–Zn ferrites, i.e., Mg20, Mg40, Mg60, and Mg80 respectively. Besides, the prepared low-cost Mg–Zn ferrite composites exhibit high flexibility and lightweight, which makes them a potential candidate as a metamaterial substrate. Furthermore, a single negative (SNG) metamaterial unit cell is fabricated on the prepared, flexible microwave composites, and their essential electromagnetic behaviors are observed. Very good effective medium ratios (EMR) vales are obtained from 14.65 to 18.47, which ensure the compactness of the fabricated prototypes with a physical dimension of 8 × 6.5 mm2. Also, the proposed materials have shown better performances comparing with conventional FR4 and RO4533 materials, and they have covered S-, C-, X-, Ku-, and K-band of microwave frequency region. Thus, the prepared, flexible SNG metamaterials on MgxZn(1−x)Fe2O4 composites are suitable for microwave and flexible technologies.

scholarly journals Performance Improvement of ZnSnO Thin-Film Transistors with Low-Temperature Self-Combustion Reaction

Electronics ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 1099
Author(s):  
Ye-Ji Han ◽  
Se Hyeong Lee ◽  
So-Young Bak ◽  
Tae-Hee Han ◽  
Sangwoo Kim ◽  
...  
Keyword(s):  
Thin Film ◽  
Photoelectron Spectroscopy ◽  
Large Scale ◽  
Low Cost ◽  
Thermal Analyses ◽  
Thin Film Transistor ◽  
Sol Gel ◽  
Annealing Temperatures ◽  
Zinc Tin Oxide ◽  
Thermal Limitation

Conventional sol-gel solutions have received significant attention in thin-film transistor (TFT) manufacturing because of their advantages such as simple processing, large-scale applicability, and low cost. However, conventional sol-gel processed zinc tin oxide (ZTO) TFTs have a thermal limitation in that they require high annealing temperatures of more than 500 °C, which are incompatible with most flexible plastic substrates. In this study, to overcome the thermal limitation of conventional sol-gel processed ZTO TFTs, we demonstrated a ZTO TFT that was fabricated at low annealing temperatures of 350 °C using self-combustion. The optimized device exhibited satisfactory performance, with μsat of 4.72 cm2/V∙s, Vth of −1.28 V, SS of 0.86 V/decade, and ION/OFF of 1.70 × 106 at a low annealing temperature of 350 °C for one hour. To compare a conventional sol-gel processed ZTO TFT with the optimized device, thermogravimetric and differential thermal analyses (TG-DTA) and X-ray photoelectron spectroscopy (XPS) were implemented.

Structural, Magnetic and Dielectric Analysis of Higher Magnetic Mn Doped Zn-Cr Oxide Nanoparticles

2021 ◽  
Vol 9 (VI) ◽  
pp. 95-102
Author(s):  
S. D. Balsure
Keyword(s):  
Type Strain ◽  
Sol Gel ◽  
Hexagonal Wurtzite Structure ◽  
Xrd Analysis ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Microstructural Parameters ◽  
Auto Combustion ◽  
Mn Doped ◽  
Combustion Technique

Higher magnetic Mn doped Zn-Cr oxide nanoparticles with general compositional formula MxZn0.95-xCr0.05O have been synthesized by using sol-gel auto combustion technique. Room temperature X-ray diffraction (XRD) technique has been employed to study the structural and microstructural parameters of the as-prepared samples. XRD analysis confirms the phase purity and hexagonal wurtzite structure of all the samples. Replacement of Zn2+ ions by Mn2+ ions shifts peak positions slightly towards the lower angles which in turn expands the lattice lengths ‘a’ from 3.2487 to 3.2528 Å and ‘c’ from 5.2043 to 5.2118 Å. Crystallite size obtained from Scherrer equation was confirmed by Williamson – Hall (W-H) and size – strain plot methods (SSP). Both W-H and SSP methods reveals the tensile type strain for undoped sample and comprehensive type strain for Mn2+ doped samples. Magnetic properties were investigated by using vibrating sample magnetometer. Diluted ferromagnetic behaviour is observed for all the samples and saturation magnetization (MS) increases from 0.0514 to 0.1163 emu/gm. Two-probe technique was employed to understand the dielectric behaviour of the samples as a function of frequency. At lower frequency region, both dielectric constant () and dielectric loss tangent (tan ) shows higher values and decreases with the increasing applied frequency.

Sol–gel derived Li–La–Zr–O thin films as solid electrolytes for lithium-ion batteries

2014 ◽  
Vol 2 (33) ◽  
pp. 13277 ◽  
Author(s):  
Ru-Jun Chen ◽  
Mian Huang ◽  
Wen-Ze Huang ◽  
Yang Shen ◽  
Yuan-Hua Lin ◽  
...  
Keyword(s):  
Thin Films ◽  
Lithium Ion Batteries ◽  
Solid Electrolytes ◽  
Sol Gel ◽  
Lithium Ion
Sign in / Sign up

Export Citation Format

Share Document