scholarly journals Accurate technologies of agricultural crops cultivation for organic farming

2021 ◽  
Vol 843 (1) ◽  
pp. 012028
Author(s):  
V F Kirdin ◽  
Yu A Laptina
Keyword(s):  
Spring Barley ◽  
Wheat Yield ◽  
Farming Systems ◽  
High Energy ◽  
High Productivity ◽  
Winter Triticale ◽  
The Difference ◽  
Leguminous Crops ◽  
Rotation Crop ◽  
Yield Of Oats

Abstract The article presents the results of many years of experiments on the development of energy-saving farming systems. Preference in crop rotations should be given to multi-depth combined treatments that provide high productivity and are characterized by high-energy efficiency. Data on the yield of grain and leguminous crops in a six-field grain crop rotation with constant dump and combined longline tillage shows that the yield of oats in the first year of rotation according to the experimental variants was the same and amounted to 3.60 t/ha. In the second year of winter wheat yield in the variant with longline tillage was by 0.20 t/ha more in comparison with a plow on row, in the third year the difference in yield of spring barley on options for primary processing amounted to 0.30 t/ha in favor of combined tiered processing, in the fourth year the yield of peas has also been found to 0.40 t/ha more, also on the option of combined longline processing in the fifth year of the rotation crop of winter triticale. The yield of oats was 0.30 t/ha higher, and in the sixth year the yield of oats was 0.40 t/ha higher on the variant of combined longline processing.

scholarly journals Weed species diversity in organic and integrated farming systems

2013 ◽  
Vol 66 (3) ◽  
pp. 113-124 ◽  
Author(s):  
Magdalena Jastrzębska ◽  
Wiesław P. Jastrzębski ◽  
Czesław Hołdyński ◽  
Marta K. Kostrzewska
Keyword(s):  
Species Diversity ◽  
Organic Farming ◽  
Spring Barley ◽  
Red Clover ◽  
Farming Systems ◽  
Farming System ◽  
Quantitative Structure ◽  
Weed Species ◽  
Winter Triticale ◽  
Root Crops

Phytosociological data were collected in 1994–1996 in plots (relevés) at the Research Station for Organic Farming and Conservation Breeding of the Polish Academy of Sciences in Popielno included in a large-area experiment conducted according to the concept and method proposed by Prof. S. Nawrocki. In a four-field crop rotation (root crops – spring barley undersown with red clover and grasses – red clover/grass mixture – winter triticale), each field was divided into two management units, organic and integrated. Data were collected in relevés by the Braun-Blanquet method, each year at the peak of the growing season. Weed abundance (% cover) in cultivated fields and the number of weed species (species richness) in crops were determined, which provided a basis for calculating the Shannon-Wiener indices of species diversity and evenness, and the Rényi profiles. The qualitative (species) and quantitative structure of weed communities was compared using the Sørensen index. A total of 115 weed taxa (species, subspecies and varieties) were identified in the examined agro-phytocenoses. <em>Echinochloa crus-galli</em>, <em>Chenopodium album</em>, <em>Matricaria maritima</em> subsp. <em>inodora</em>, <em>Capsella bursa-pastoris</em>, <em>Thlaspi arvense</em> and <em>Stellaria media</em> were the most abundant<em>.</em> Weed infestation was slightly higher in the organic farming system than in the integrated system. Organic farming contributed to higher weed species diversity in root crops, red clover/grass mixtures and winter triticale. Weed species richness was reduced in red clover/grass stands, while root crops and – to a lesser degree – spring barley undersown with red clover and grasses decreased weed species diversity. The species composition and in particular the quantitative structure of weeds were affected by crop species and cultivation regime rather than by the farming system. Weed communities of crops grown under organic and integrated farming systems were more similar with regard to species composition than the quantitative structure.

scholarly journals Upper limits to sustainable organic wheat yields

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Thomas F. Döring ◽  
Daniel Neuhoff
Keyword(s):  
Arable Land ◽  
Wheat Yield ◽  
Farming Systems ◽  
Yield Gap ◽  
N Losses ◽  
Mineral N ◽  
Upper Limits ◽  
Agricultural Use ◽  
Leguminous Crops ◽  
Biological Nitrogen

AbstractCurrent use of mineral nitrogen (N) fertilizers is unsustainable because of its high fossil energy requirements and a considerable enrichment of the biosphere with reactive N. Biological nitrogen fixation (BNF) from leguminous crops is the most important renewable primary N source, especially in organic farming. However, it remains unclear to which degree BNF can sustainably replace mineral N, overcome the organic to conventional (O:C) yield gap and contribute to food security. Using an agronomic modelling approach, we show that in high-yielding areas farming systems exclusively based on BNF are unlikely to sustainably reach yield levels of mineral-N based systems. For a high reference wheat yield (7.5 t ha−1) and a realistic proportion of fodder legumes in the rotation (33%) even optimistic levels of BNF (282 kg N ha−1), resulted in an O:C ratio far below parity (0.62). Various constraints limit the agricultural use of BNF, such as arable land available for legumes and highly variable performance under on-farm conditions. Reducing the O:C yield gap through legumes will require BNF performance to be increased and N losses to be minimised, yet our results show that limits to the productivity of legume-based farming systems will still remain inevitable.

scholarly journals Wheat yield gaps across smallholder farming systems in Ethiopia

2021 ◽  
Vol 41 (1) ◽  
Author(s):  
João Vasco Silva ◽  
Pytrik Reidsma ◽  
Frédéric Baudron ◽  
Moti Jaleta ◽  
Kindie Tesfaye ◽  
...  
Keyword(s):  
Stochastic Frontier Analysis ◽  
Stochastic Frontier ◽  
Wheat Yield ◽  
Farming Systems ◽  
Smallholder Farming ◽  
Yield Gap ◽  
Frontier Analysis ◽  
Ecological Zones ◽  
Relative Contribution ◽  
Yield Gaps

AbstractWheat yields in Ethiopia need to increase considerably to reduce import dependency and keep up with the expected increase in population and dietary changes. Despite the yield progress observed in recent years, wheat yield gaps remain large. Here, we decompose wheat yield gaps in Ethiopia into efficiency, resource, and technology yield gaps and relate those yield gaps to broader farm(ing) systems aspects. To do so, stochastic frontier analysis was applied to a nationally representative panel dataset covering the Meher seasons of 2009 and 2013 and crop modelling was used to simulate the water-limited yield (Yw) in the same years. Farming systems analysis was conducted to describe crop area shares and the availability of land, labour, and capital in contrasting administrative zones. Wheat yield in farmers’ fields averaged 1.9 t ha− 1 corresponding to ca. 20% of Yw. Most of the yield gap was attributed to the technology yield gap (> 50% of Yw) but narrowing efficiency (ca. 10% of Yw) and resource yield gaps (ca. 15% of Yw) with current technologies can nearly double actual yields and contribute to achieve wheat self-sufficiency in Ethiopia. There were small differences in the relative contribution of the intermediate yield gaps to the overall yield gap across agro-ecological zones, administrative zones, and farming systems. At farm level, oxen ownership was positively associated with the wheat cultivated area in zones with relatively large cultivated areas per household (West Arsi and North Showa) while no relationship was found between oxen ownership and the amount of inputs used per hectare of wheat in the zones studied. This is the first thorough yield gap decomposition for wheat in Ethiopia and our results suggest government policies aiming to increase wheat production should prioritise accessibility and affordability of inputs and dissemination of technologies that allow for precise use of these inputs.

scholarly journals Sources of Nitrogen for Winter Triticale (Triticosecale Wittm. ex A.Camus) Succeeding Pea (Pisum sativum L.)

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 527
Author(s):  
Andrzej Wysokinski ◽  
Izabela Lozak ◽  
Beata Kuziemska
Keyword(s):  
Root Nodule ◽  
Crop Residues ◽  
Spring Barley ◽  
Sandy Soils ◽  
High Availability ◽  
Atmospheric Nitrogen ◽  
15N Isotope ◽  
Carbon And Nitrogen ◽  
Winter Triticale ◽  
Pisum Sativum L

Atmospheric nitrogen biologically reduced in legumes root nodule and accumulated in their postharvest residues may be of great importance as a source of this macronutrient for succeeding crops. The aim of the study was to determine nitrogen uptake by winter triticale from pea postharvest residues, including N fixed from atmosphere, using in the study fertilizer enriched with the 15N isotope. Triticale was grown without nitrogen fertilization at sites where the forecrops had been two pea cultivars (multi-purpose and field pea) and, for comparison, spring barley. The triticale crop succeeding pea took up more nitrogen from the soil (59.1%) and less from the residues of the forecrop (41.1%). The corresponding values where the forecrop was barley were 92.1% and 7.9%. In the triticale, the percentage of nitrogen derived from the atmosphere, introduced into the soil with pea crop residues amounted to 23.8%. The amounts of nitrogen derived from all sources in the entire biomass of triticale plants grown after harvesting of pea were similar for both pea cultivars. The cereal took up more nitrogen from all sources, when the soil on which the experiment was conducted had higher content of carbon and nitrogen and a greater amount of N was introduced with the pea residues. Nitrogen from pea residues had high availability for winter triticale as a succeeding crop cultivated on sandy soils.

Correlation Between the V-I Characteristics of (0001) 4H-SiC PN Junctions Having Different Structural Features and Synchrotron X-ray Topography

2008 ◽  
Vol 1069 ◽  
Author(s):  
Ryoji Kosugi ◽  
Toyokazu Sakata ◽  
Yuuki Sakuma ◽  
Tsutomu Yatsuo ◽  
Hirofumi Matsuhata ◽  
...  
Keyword(s):  
High Energy ◽  
Structural Features ◽  
Incidence Geometry ◽  
Voltage Source ◽  
Large Area ◽  
Chip Area ◽  
Power Mosfets ◽  
X Ray ◽  
Pn Junctions ◽  
The Difference

ABSTRACTIn practical use of the SiC power MOSFETs, further reduction of the channel resistance, high stability under harsh environments, and also, high product yield of large area devices are indispensable. Pn diodes with large chip area have been already reported with high fabrication yield, however, there is few reports in terms of the power MOSFETs. To clarify the difference between the simple pn diodes and power MOSFETs, we have fabricated four pn-type junction TEGs having the different structural features. Those pn junctions are close to the similar structure of DIMOS (Double-implanted MOS) step-by-step from the simple pn diodes. We have surveyed the V-I characteristics dependence on each structural features over the 2inch wafer. Before their fabrication, we formed grid patterns with numbering over the 2inch wafer, then performed the synchrotron x-ray topography observation. This enables the direct comparison the electrical and spectrographic characteristics of each pn junctions with the fingerprints of defects.Four structural features from TypeA to TypeD are as follows. TypeA is the most simple structure as same as the standard pn diodes formed by Al+ ion implantation (I/I), except that the Al+ I/I condition conforms to that of the p-well I/I in the DIMOS. The JTE structure was used for the edge termination on all junctions. While the TypeA consists of one p-type region, TypeB and TypeC consists of a lot of p-wells. The difference of Type B and C is a difference of the oxide between the adjacent p-wells. The oxide of TypeB consists of the thick field oxide, while that of TypeC consists of the thermal oxide corresponding to the gate oxide in the DIMOS. In the TypeD structure, n+ region corresponding to the source in the DIMOS was added by the P+ I/I. The TypeD is the same structure of the DIMOS, except that the gate and source contacts are shorted. The V-I measurements of the pn junctions are performed using the KEITHLEY 237 voltage source meters with semi-auto probe machine. An active area of the fabricated pn junctions TEGs are 150um2 and 1mm2. Concentration and thickness of the drift layer are 1e16cm−3 and 10um, respectively.In order to compare the V-I characteristics of fabricated pn junctions with their defects information that obtained from x-ray topography measurements directly, the grid patterns are formed before the fabrication. The grid patterns were formed over the 2inch wafer by the SiC etching. The synchrotron x-ray topography measurements are carried out at the Beam-Line 15C in Photon-Factory in High-Energy-Accelerator-Research-Organization. Three diffraction conditions, g=11-28, -1-128, and 1-108, are chosen in grazing-incidence geometry (improved Berg-Barrett method).In the presentation, the V-I characteristics mapping on the 2inch wafer for each pn junctions, and the comparison of V-I characteristics with x-ray topography will be reported.

scholarly journals Overheating In Silicon During Pulsed-Laser Irradiation?

1985 ◽  
Vol 51 ◽  
Author(s):  
B. C. Larson ◽  
J. Z. Tischler ◽  
D. M. Mills
Keyword(s):  
Laser Irradiation ◽  
Thermal Strain ◽  
Pulsed Laser ◽  
Interface Velocity ◽  
High Energy ◽  
Time Resolved ◽  
Synchrotron Source ◽  
Zero Velocity ◽  
The Difference ◽  
Pulsed Laser Irradiation

ABSTRACTNanosecond resolution time-resolved x-ray diffraction measurements of thermal strain have been used to measure the interface temperatures in silicon during pulsed-laser irradiation. The pulsed-time-structure of the Cornell High Energy Synchrotron Source (CHESS) was used to measure the temperature of the liquid-solid interface of <111> silicon during melting with an interface velocity of 11 m/s, at a time of near zero velocity, and at a regrowth velocity of 6 m/s. The results of these measurements indicate 110 K difference between the temperature of the interface during melting and regrowth, and the measurement at zero velocity shows that most of the difference is associated with undercooling during the regrowth phase.

scholarly journals Towards Sustainable Development: Building’s Retrofitting with PCMs to Enhance the Indoor Thermal Comfort in Tropical Climate, Malaysia

2021 ◽  
Vol 13 (7) ◽  
pp. 3614
Author(s):  
Zeyad Amin Al-Absi ◽  
Mohd Isa Mohd Hafizal ◽  
Mazran Ismail ◽  
Azhar Ghazali
Keyword(s):  
Climate Change ◽  
Sustainable Development ◽  
Thermal Comfort ◽  
Phase Change Materials ◽  
Thermal Environment ◽  
High Energy ◽  
Transition Temperatures ◽  
Indoor Thermal Environment ◽  
Adaptive Thermal Comfort ◽  
The Difference

Building sector is associated with high energy consumption and greenhouse gas emissions, which contribute to climate change. Sustainable development emphasizes any actions to reduce climate change and its effect. In Malaysia, half of the energy utilized in buildings goes towards building cooling. Thermal comfort studies and adaptive thermal comfort models reflect the high comfort temperatures for Malaysians in naturally conditioned buildings, which make it possible to tackle the difference between buildings’ indoor temperature and the required comfort temperature by using proper passive measures. This study investigates the effectiveness of building’s retrofitting with phase change materials (PCMs) as a passive cooling technology to improve the indoor thermal environment for more comfortable conditions. PCM sheets were numerically investigated below the internal finishing of the walls. The investigation involved an optimization study for the PCMs transition temperatures and quantities. The results showed significant improvement in the indoor thermal environment, especially when using lower transition temperatures and higher quantities of PCMs. Therefore, the monthly thermal discomfort time has decreased completely, while the thermal comfort time has increased to as high as 98%. The PCM was effective year-round and the optimum performance for the investigated conditions was achieved when using 18mm layer of PCM27-26.

scholarly journals The effect of soybean formula and formula 100 supplementation on the growth of preschool children

2016 ◽  
Vol 45 (6) ◽  
pp. 256
Author(s):  
M Mexitalia ◽  
Yohanes Tri Nugroho ◽  
J C Susanto
Keyword(s):  
Preschool Children ◽  
Body Height ◽  
High Energy ◽  
Second Phase ◽  
Z Score ◽  
Health Food ◽  
Alternative Health ◽  
Second Phases ◽  
The Difference ◽  
Weight For Age

Background Preschool children are vulnerable in growth. Soy-bean formula (SF) and formula-100 (F100) are supplementary foodswhich contain of high energy and are available at low price; how-ever, they are not widely used for preschool children.Objectives To investigate the effect of SF compared to F100 onthe growth of preschool children.Methods A cross-over trial was conducted on 96 preschool chil-dren aged 4-7 years. Subjects were randomly divided into 2 groupswhich received 200 ml soybean formula (n=49) or F100 (n=47) for1 month and crossed-over after a six-week wash-out period. Bodyweight was measured weekly. Body height and food analysis by 3-day food recall were measured at the beginning and the end of thestudy. The criteria of the acceptability of the formula was eithergood or poor.Results Supplementation with SF as well as F100 induced catchup growth as shown by the increase of Δz-score. There were nosignificant difference of Δ weight for age z-score, Δ height for agez-score, and Δ weight for height z score between groups duringthe first and second phases of the trial. The acceptability of F100was significantly better than that of SF at the beginning; neverthe-less, the difference was not significant at the second phase trial.Conclusions Soybean formula and F100 given for a one monthperiod can induce catch-up growth in preschool children. Soybeanformula as an alternative health food can be accepted by preschoolchildren

scholarly journals Tillage in Relation to Distribution of Nutrients and Organic Carbon in the Soil

2011 ◽  
Vol 57 (1) ◽  
pp. 21-30
Author(s):  
Božena Šoltysová ◽  
Martin Danilovič
Keyword(s):  
Organic Carbon ◽  
Soil Organic Carbon ◽  
Total Nitrogen ◽  
Spring Barley ◽  
Conventional Tillage ◽  
Soil Tillage ◽  
Reduced Tillage ◽  
Available Phosphorus ◽  
No Tillage ◽  
The Difference

Tillage in Relation to Distribution of Nutrients and Organic Carbon in the SoilChanges of total nitrogen, available phosphorus, available potassium and soil organic carbon were observed on gleyic Fluvisols (locality Milhostov) at the following crops: grain maize (2005), spring barley (2006), winter wheat (2007), soya (2008), grain maize (2009). The experiment was realized at three soil tillage technologies: conventional tillage, reduced tillage and no-tillage. Soil samples were collected from three depths (0-0.15 m; 0.15-0.30 m; 0.30-0.45 m). The ratio of soil organic carbon to total nitrogen was also calculated.Soil tillage affects significantly the content of total nitrogen in soil. The difference between the convetional tillage and soil protective tillages was significant. The balance showed that the content of total nitrogen decreased at reduced tillage by 5.2 rel.%, at no-tillage by 5.1 rel.% and at conventional tillage by 0.7 rel.%.Similarly, the content of organic matter in the soil was significantly affected by soil tillage. The content of soil organic carbon found at the end of the research period was lower by 4.1 rel.% at reduced tillage, by 4.8 rel.% at no-tillage and by 4.9 rel.% at conventional tillage compared with initial stage. The difference between the convetional tillage and soil protective tillages was significant.Less significant relationship was found between the soil tillage and the content of available phosphorus. The balance showed that the content of available phosphorus was increased at reduced tillage (by 4.1 rel.%) and was decreased at no-tillage (by 9.5 rel.%) and at conventional tillage (by 3.3 rel.%).Tillage did not significantly affect the content of available potassium in the soil.

scholarly journals Cereal Breeding for Organic Farming: Crop Traits Related with Competitiveness Against Weeds

2013 ◽  
Vol 67 (3) ◽  
pp. 272-276
Author(s):  
Dace Piliksere ◽  
Vija Strazdiņa ◽  
Zaiga Vīcupe ◽  
Zaiga Jansone ◽  
Linda Legzdiņa ◽  
...  
Keyword(s):  
Winter Wheat ◽  
Spring Barley ◽  
Pearson Correlation ◽  
Dry Weight ◽  
Development Rate ◽  
Winter Triticale ◽  
Organic Breeding ◽  
Cereal Breeding ◽  
Cereal Species ◽  
Crop Development

The objectives of the investigation were to identify competitive traits in cereal species in order to contribute to development of a methodology for evaluation of cereal genotypes for their competitive capacity against weeds, which is important for organic breeding aims. The investigation was carried out with spring barley, spring oat, winter triticale and winter wheat genotypes in organic crop rotations in two different locations. Relations between crop traits and weed dry weight were evaluated by Pearson correlation coefficients. The results stressed the significance of some crop traits for cereal competitiveness against weeds for organic breeding purposes: (i) growth habit, canopy height, and crop development rate for spring barley; (ii) crop development rate for spring oats; (iii) winter hardiness and the coefficient of tillering for winter triticale, and (iv) winterhardiness, the coefficient of tillering, the number of productive stems, crop canopy and plant height for winter wheat. It coud be useful to include measurements of crop ground cover for estimating competitiveness of cereal species against weeds

Sign in / Sign up

Export Citation Format

Share Document