scholarly journals Improvement on small-scale tuna fisheries data quality through the application of e-logbook system

2021 ◽  
Vol 869 (1) ◽  
pp. 012020
Author(s):  
S A Raup ◽  
S Patmiarsih ◽  
R D Juniar ◽  
B Setyadji
Keyword(s):  
Data Quality ◽  
Promising Result ◽  
Low Cost ◽  
Vital Role ◽  
Dependent Data ◽  
Small Scale ◽  
Insufficient Data ◽  
General Data ◽  
Tuna Fisheries ◽  
Temporal Coverage

Abstract Tuna and tuna-like fisheries play a vital role in Indonesian livelihood, especially in the archipelagic waters. However, despite the importance, the concern in general data collection activities for tuna, i.e., limited, with incomplete scientific knowledge and insufficient data has hampered the assessment. The purpose of this study was to analyse on how fisheries-dependent data system could transform the data quality. E-logbook has the best attribute for reaching the goals, especially for small-scale tuna fisheries. Characterised by low cost and vast spatial and temporal coverage, it is convinced on why the program should be expanded and monitored carefully. Analysis on fisheries indicators showed a promising result, especially for filling the gap which could not be covered by research.

scholarly journals Fabrication of Poly(pentaerythritol tetrakis (3-mercaptopropionate)/dipentaerythritol penta-/hexa-acrylate)HIPEs Macroporous Scaffold with Alpha Hydroxyapatite via Photopolymerization for Fibroblast Regeneration

Crystals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 746
Author(s):  
Muhammad Imran Azman ◽  
Nunthawan Kwangsawart ◽  
Jitima Preechawong ◽  
Manit Nithitanakul ◽  
Pornsri Sapsrithong
Keyword(s):  
Maximum Stress ◽  
Cell Attachment ◽  
Promising Result ◽  
Low Cost ◽  
Vital Role ◽  
Compressive Modulus ◽  
Polymerization Reaction ◽  
Porous Scaffolds ◽  
Support Cell ◽  
Biomaterial Application

Synthetic biomaterials that can be structured into porous scaffolds for support cell growth have played a role in developing the field of tissue engineering. This research focused on combination of biodegradable emulsion template along with the assisting of low-cost polymerization reaction. The appendage of ester-based surfactant, Hypermer B246, played a vital role which gave an outstanding dispersion in HIPEs system and degradability. PolyHIPEs were prepared by using domestic ultraviolet light source for producing a multiscale porosity material. The morphology showed a promising result of poly(pentaerythritol tetrakis (3-mercaptopropionate)/dipentaerythritol penta-/hexa-acrylate)HIPEs with varied Hypermer B246 surfactant concentration resulting in the pores size increased in between 51.2 ± 9.8 µm to 131.4 ± 26.32 µm. Cellular moieties of poly(TT/DPEHA) HIPEs were confirmed by using SEM while inclusion of hydroxyapatite were confirmed by SEM, FTIR and EDX-SEM and quantified by thermogravimetric analysis. The maximum stress and compressive modulus of the obtained materials were significantly enhanced with HA up to five percent by weight. Poly(TT/DPEHA)HIPEs with HA showed the ability for the cell attachment and the adhesion/proliferation of the cells, suggested that poly(TT/DPEHA) HIPEs with HA were suitable for biomaterial application.

Impact Of Human Resource Practices In Small Scale Industries In Thoothukudi District Of Tamilnadu

2019 ◽  
Vol 5 (4) ◽  
pp. 160-169
Author(s):  
Srimo Fernandas
Keyword(s):  
Economic Growth ◽  
Human Resource ◽  
Management Practices ◽  
Human Factor ◽  
Vital Role ◽  
Small Scale ◽  
Average Income ◽  
Small Scale Industry ◽  
Human Resource Management Practices ◽  
Small Scale Industries

In the economic growth of a country, the human factor plays a vital role. The study has been made to study the growth of small scale industries in the development of human resource management practices of in Thoothukudi district. The study has the following objectives. To study the socio-economic outline of the small scale industry owners. To understand the nature of management of the small-scale industry. To find out the motivational factors for starting small-scale industries. To analyse the average income generated by different activities by the small scale industry owners.

Tools of Transformation: Appropriate Technology in U.S. Countercultural Literature

2012 ◽  
Vol 44 (2) ◽  
pp. 75-93
Author(s):  
Peter Mortensen
Keyword(s):  
Low Cost ◽  
Appropriate Technology ◽  
Small Scale ◽  
Environmental Transformation ◽  
Buckminster Fuller ◽  
1960S And 1970S ◽  
The 1960S ◽  
Environmentally Sound ◽  
User Friendly ◽  
Second Wave

This essay takes its cue from second-wave ecocriticism and from recent scholarly interest in the “appropriate technology” movement that evolved during the 1960s and 1970s in California and elsewhere. “Appropriate technology” (or AT) refers to a loosely-knit group of writers, engineers and designers active in the years around 1970, and more generally to the counterculture’s promotion, development and application of technologies that were small-scale, low-cost, user-friendly, human-empowering and environmentally sound. Focusing on two roughly contemporary but now largely forgotten American texts Sidney Goldfarb’s lyric poem “Solar-Heated-Rhombic-Dodecahedron” (1969) and Gurney Norman’s novel Divine Right’s Trip (1971)—I consider how “hip” literary writers contributed to eco-technological discourse and argue for the 1960s counterculture’s relevance to present-day ecological concerns. Goldfarb’s and Norman’s texts interest me because they conceptualize iconic 1960s technologies—especially the Buckminster Fuller-inspired geodesic dome and the Volkswagen van—not as inherently alienating machines but as tools of profound individual, social and environmental transformation. Synthesizing antimodernist back-to-nature desires with modernist enthusiasm for (certain kinds of) machinery, these texts adumbrate a humanity- and modernity-centered post-wilderness model of environmentalism that resonates with the dilemmas that we face in our increasingly resource-impoverished, rapidly warming and densely populated world.

scholarly journals Development of a simplified gas ultracleaning process: experiments in biomass residue-based fixed-bed gasification syngas

2021 ◽  
Author(s):  
Christian Frilund ◽  
Esa Kurkela ◽  
Ilkka Hiltunen
Keyword(s):  
Activated Carbons ◽  
Low Cost ◽  
Fixed Bed ◽  
Carbonyl Sulfide ◽  
Gas Analysis ◽  
Small Scale ◽  
Cleaning Process ◽  
Medium Temperature ◽  
Gas Cleaning ◽  
Adsorption Affinity

AbstractFor the realization of small-scale biomass-to-liquid (BTL) processes, low-cost syngas cleaning remains a major obstacle, and for this reason a simplified gas ultracleaning process is being developed. In this study, a low- to medium-temperature final gas cleaning process based on adsorption and organic solvent-free scrubbing methods was coupled to a pilot-scale staged fixed-bed gasification facility including hot filtration and catalytic reforming steps for extended duration gas cleaning tests for the generation of ultraclean syngas. The final gas cleaning process purified syngas from woody and agricultural biomass origin to a degree suitable for catalytic synthesis. The gas contained up to 3000 ppm of ammonia, 1300 ppm of benzene, 200 ppm of hydrogen sulfide, 10 ppm of carbonyl sulfide, and 5 ppm of hydrogen cyanide. Post-run characterization displayed that the accumulation of impurities on the Cu-based deoxygenation catalyst (TOS 105 h) did not occur, demonstrating that effective main impurity removal was achieved in the first two steps: acidic water scrubbing (AWC) and adsorption by activated carbons (AR). In the final test campaign, a comprehensive multipoint gas analysis confirmed that ammonia was fully removed by the scrubbing step, and benzene and H2S were fully removed by the subsequent activated carbon beds. The activated carbons achieved > 90% removal of up to 100 ppm of COS and 5 ppm of HCN in the syngas. These results provide insights into the adsorption affinity of activated carbons in a complex impurity matrix, which would be arduous to replicate in laboratory conditions.

scholarly journals Understanding Spatial Variability of NO2 in Urban Areas Using Spatial Modelling and Data Fusion Approaches

Atmosphere ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 179
Author(s):  
Said Munir ◽  
Martin Mayfield ◽  
Daniel Coca
Keyword(s):  
Data Fusion ◽  
Spatial Variability ◽  
Urban Areas ◽  
Road Traffic ◽  
Dispersion Model ◽  
Low Cost ◽  
Spatial Modelling ◽  
City Centre ◽  
Small Scale ◽  
The City

Small-scale spatial variability in NO2 concentrations is analysed with the help of pollution maps. Maps of NO2 estimated by the Airviro dispersion model and land use regression (LUR) model are fused with measured NO2 concentrations from low-cost sensors (LCS), reference sensors and diffusion tubes. In this study, geostatistical universal kriging was employed for fusing (integrating) model estimations with measured NO2 concentrations. The results showed that the data fusion approach was capable of estimating realistic NO2 concentration maps that inherited spatial patterns of the pollutant from the model estimations and adjusted the modelled values using the measured concentrations. Maps produced by the fusion of NO2-LCS with NO2-LUR produced better results, with r-value 0.96 and RMSE 9.09. Data fusion adds value to both measured and estimated concentrations: the measured data are improved by predicting spatiotemporal gaps, whereas the modelled data are improved by constraining them with observed data. Hotspots of NO2 were shown in the city centre, eastern parts of the city towards the motorway (M1) and on some major roads. Air quality standards were exceeded at several locations in Sheffield, where annual mean NO2 levels were higher than 40 µg/m3. Road traffic was considered to be the dominant emission source of NO2 in Sheffield.

scholarly journals Data Quality Measures and Efficient Evaluation Algorithms for Large-Scale High-Dimensional Data

2021 ◽  
Vol 11 (2) ◽  
pp. 472
Author(s):  
Hyeongmin Cho ◽  
Sangkyun Lee
Keyword(s):  
Machine Learning ◽  
Data Quality ◽  
Large Scale ◽  
High Dimensional Data ◽  
Quality Measures ◽  
Training Data ◽  
Measure Data ◽  
High Dimensional ◽  
Small Scale ◽  
Class Separability

Machine learning has been proven to be effective in various application areas, such as object and speech recognition on mobile systems. Since a critical key to machine learning success is the availability of large training data, many datasets are being disclosed and published online. From a data consumer or manager point of view, measuring data quality is an important first step in the learning process. We need to determine which datasets to use, update, and maintain. However, not many practical ways to measure data quality are available today, especially when it comes to large-scale high-dimensional data, such as images and videos. This paper proposes two data quality measures that can compute class separability and in-class variability, the two important aspects of data quality, for a given dataset. Classical data quality measures tend to focus only on class separability; however, we suggest that in-class variability is another important data quality factor. We provide efficient algorithms to compute our quality measures based on random projections and bootstrapping with statistical benefits on large-scale high-dimensional data. In experiments, we show that our measures are compatible with classical measures on small-scale data and can be computed much more efficiently on large-scale high-dimensional datasets.

scholarly journals A low-cost technique to measure bank erosion proces ses along middle-size river reaches

2018 ◽  
Author(s):  
Gonzalo Duró ◽  
Alessandra Crosato ◽  
Maarten G. Kleinhans ◽  
Wim S. J. Uijttewaal
Keyword(s):  
Laser Scanning ◽  
Spatial Scales ◽  
Low Cost ◽  
Bank Erosion ◽  
Water Levels ◽  
Small Scale ◽  
Observation Distance ◽  
River Bank ◽  
Erosion Processes ◽  
Rtk Gps

Abstract. Diverse methods are currently available to measure river bank erosion at broad-ranging temporal and spatial scales. Yet, no technique provides low-cost and high-resolution to survey small-scale bank processes along a river reach. We investigate the capabilities of Structure-from-Motion photogrammetry applied with imagery from an Unmanned Aerial Vehicle (UAV) to describe the evolution of riverbank profiles in middle-size rivers. The bank erosion cycle is used as a reference to assess the applicability of different techniques. We surveyed 1.2 km of a restored bank of the Meuse River eight times within a year, combining different photograph perspectives and overlaps to identify an efficient UAV flight to monitor banks. The accuracy of the Digital Surface Models (DSMs) was evaluated compared with RTK GPS points and an Airborne Laser Scanning (ALS) of the whole reach. An oblique perspective with eight photo overlaps was sufficient to achieve the highest relative precision to observation distance of ~1:1400, with 10 cm error range. A complementary nadiral view increased coverage behind bank toe vegetation. The DSM and ALS had comparable accuracies except on banks, where the latter overestimates elevations. Sequential DSMs captured signatures of the erosion cycle such as mass failures, slump-block deposition, and bank undermining. Although this technique requires low water levels and banks without dense vegetation, it is a low-cost method to survey reach-scale riverbanks in sufficient resolution to quantify bank retreat and identify morphological features of the bank failure and erosion processes.

Integrated Process for Textile Cotton Waste (TCW) Valorization: Waste-to-Energy and Wastewater Decontamination

2016 ◽  
Author(s):  
A. Ribeiro ◽  
C. Vilarinho ◽  
J. Araújo ◽  
J. Carvalho
Keyword(s):  
Raw Materials ◽  
Removal Rate ◽  
Low Cost ◽  
Calorific Value ◽  
Waste To Energy ◽  
Synthetic Wastewater ◽  
Small Scale ◽  
World Population ◽  
Cotton Waste ◽  
Textile Industries

The increasing of world population, industrialization and global consuming, existing market products existed in the along with diversification of raw materials, are responsible for an exponential increase of wastes. This scenario represents loss of resources and ultimately causes air, soils and water pollution. Therefore, proper waste management is currently one of the major challenges faced by modern societies. Textile industries represents, in Portugal, almost 10% of total productive transforming sector and 19% of total employments in the sector composed by almost 7.000 companies. One of the main environmental problems of textile industries is the production of significant quantities of wastes from its different processing steps. According to the Portuguese Institute of Statistics (INE) these industries produce almost 500.000 tons of wastes each year, with the textile cotton waste (TCW) being the most expressive. It was estimated that 4.000 tons of TCW are produced each year in Portugal. In this work an integrated TCW valorisation procedure was evaluated, firstly by its thermal and energetic valorisation with slow pyrolysis followed by the utilization of biochar by-product, in lead and chromium synthetic wastewater decontamination. Pyrolysis experiments were conducted in a small scale rotating pyrolysis reactor with 0.1 m3 of total capacity. Results of pyrolysis experiments showed the formation of 0,241 m3 of biogas for each kilogram of TCW. Results also demonstrated that the biogas is mostly composed by hydrogen (22%), methane (14 %), carbon monoxide (20%) and carbon dioxide (12%), which represents a total high calorific value of 12.3 MJ/Nm3. Regarding biochar, results of elemental analysis demonstrated a high percentage of carbon driving its use as low cost adsorbent. Adsorption experiments were conducted with lead and chromium synthetic wastewaters (25, 50 and 100 mg L−1) in batch vessels with controlled pH. It was evaluated the behaviour of adsorption capacity and removal rate of each metal during 120 minutes of contact time using 5, 10 and 50 g L−1 of adsorbent dosage. Results indicated high affinity of adsorbent with each tested metal with 78% of removal rate in chromium and 95% in lead experiments. This suggests that biochar from TCW pyrolysis may be appropriated to wastewaters treatment, with high contents of heavy metals and it can be an effective alternative to activated carbon.

MECHANIZATION OF POTATO GRADING ON SMALL-SCALE FARMS: A CASE STUDY FROM PERU

2005 ◽  
Vol 41 (1) ◽  
pp. 81-92 ◽  
Author(s):  
G. P. BUTLER ◽  
T. BERNET ◽  
K. MANRIQUE
Keyword(s):  
Developing Countries ◽  
Market Integration ◽  
Low Cost ◽  
Farming System ◽  
Agricultural Products ◽  
Small Scale ◽  
Critical Aspect ◽  
Small Scale Farmers ◽  
Important Cash Crop

Potatoes are an important cash crop for small-scale producers worldwide. The move away from subsistence to commercialized farming, combined with the rapid growth in demand for processed agricultural products in developing countries, implies that small-scale farmers and researchers alike must begin to respond to these market changes and consider post-harvest treatment as a critical aspect of the potato farming system. This paper presents and assesses a low cost potato-grading machine that was designed explicitly to enable small-scale potato growers to sort tubers by size for supply to commercial processors. The results of ten experiments reveal that the machine achieves an accuracy of sort similar to commercially available graders. The machine, which uses parallel conical rollers, has the capacity to grade different tuber shapes and to adjust sorting classes, making it suitable for locations with high potato diversity. Its relatively low cost suggests that an improved and adapted version of this machine might enhance market integration of small-scale potato producers not only in Peru, but in other developing countries as well.

A Low Cost Knowledge Based System Framework for Design of Bending Die

2013 ◽  
Vol 549 ◽  
pp. 284-291 ◽  
Author(s):  
Deepak Panghal ◽  
Shailendra Kumar
Keyword(s):  
Sheet Metal ◽  
Low Cost ◽  
Visual Basic ◽  
Die Design ◽  
Small Scale ◽  
Production Rules ◽  
System Framework ◽  
Knowledge Based System ◽  
Sheet Metal Parts ◽  
Knowledge Based

This paper presents a low cost knowledge based system (KBS) framework for design of bending die. Considerations for development of KBS are discussed at some length. The proposed framework divides the task of development of expert system into different modules for major activities of bending die design. The procedure of development of KBS modules is also described at length. Production rules for each module are recommended to be coded in the AutoLISP language and designed to be loaded into the prompt area of AutoCAD or through user interface created using Visual Basic. Each module of the proposed framework is user interactive. Development of one module of the proposed framework is also described at length. This module is capable to assess manufacturability of bending sheet metal parts. An illustrative example is also included to demonstrate the usefulness of this module. The proposed system framework is flexible enough to accommodate new acquired knowledge. As the proposed system is implementable on a PC having AutoCAD software, therefore its low cost of implementation makes it affordable even by small scale sheet metal industries.

Sign in / Sign up

Export Citation Format

Share Document