scholarly journals Characteristics changes of Pasuruan locally grown brown sorghum grain due to extrusion process

2021 ◽  
Vol 924 (1) ◽  
pp. 012046
Author(s):  
E S Murtini ◽  
S Fathoni ◽  
I S Wardhana

Abstract Commercial extruded snacks available in the Indonesian market are generally cereal-based, such as from corn and rice, and there is not any that is from brown sorghum. This research aims to study changes in physical and chemical characteristics of brown sorghum grains after extrusion and compare the extrudate characteristics of products from brown sorghum grains, corn, and rice. Brown sorghum grains are de-husked, ground into grits, and extruded using a single screw extruder at 120°C. The resulting extrudates are then analyzed and compared to rice and corn extrudates. There is a change in chemical content after the sorghum grains are extruded. The content of moisture, fat, starch, and protein decreased, while the content of reducing sugar, ash, and fiber increased. The content of anti-nutritional compounds such as tannins, phytates, kafirin, and disulfide bonds decreased; so that the digestibility value increased from 48.44% (grains) to 75.67% (extrudates). Compared with extrudates from rice and corn, sorghum seed extrudate has the smallest expansion ratio, higher density, darker color, but still has a similar quality in texture.

2017 ◽  
Vol 35 (No. 6) ◽  
pp. 507-516 ◽  
Author(s):  
Jozinović Antun ◽  
Ačkar Đurđica ◽  
Jokić Stela ◽  
Babić Jurislav ◽  
Balentić Jelena Panak ◽  
...  

The effects of defatted hemp cake added to corn grits (at ratios of 0, 5, and 10% DM), the moisture content of the mixtures (15, 20, and 25%) and the temperature in the extruder ejection zone (150, 165, and 180°C) on the physical properties of extruded products have been investigated. Statistical optimization of investigated extrusion conditions using the response surface methodology was performed. The hemp cake was completely defatted by means of a supercritical CO2 extraction. The extrusion was performed on a laboratory single screw extruder and regulated by the following parameters: temperature in the dosing and compression zone (120 and 150°C), screw compression ratio (4 : 1), round die (4 mm). The change of extrusion process conditions significantly affected the physical properties of produced snacks. The expansion ratio ranged between 1.38 and 3.11, bulk density between 0.14 and 0.49 g/cm3, hardness between 18.15 and 70.62 N, fracturability from 3.65 to 10.38 mm, and the total colour change between 3.25 and 24.73.


2018 ◽  
Vol 9 (2) ◽  
pp. 194-201 ◽  
Author(s):  
Danyllo Santos Dias ◽  
Renan Caldas Umburanas ◽  
Darly Geraldo de Sena Junior

The use of intercropping sorghum-palisadegrass for grain and straw production has become an advantageous cultivation option, can provide improvements in physical and chemical soil properties, maximizes production and income to the growers. There are still many management gaps to be improved in this intercropping in order that grower has the best outcome. Considering this, the objective of this study was to evaluate different sowing dates of palisadegrass in relation to sorghum, and evaluate the yield of soybean cultivated in succession. Palisadegrass was sown in monocrop and also between the lines of sorghum at different times (0, 15 and 25 days after sowing sorghum), as well the sorghum in monocrop. Soybeans were grown in succession on the straw of the mentioned treatments. It was evaluated biomass production and grain yield. Sowing palisadegrass and sorghum on the same day reduced sorghum grain yield and the palisadegrass biomass production. However, if palisadegrass are sowed 15 days after sorghum sowing, did not reduce the sorghum grain yield. Also, if the producer aims to produce sorghum grains, it is better to delay the sowing of palisadegrass in relation to sorghum. Although, if the producer aims to produce residual dry biomass, it is better to sow palisadegrass on the same day as sorghum or monocrop palisadegrass. Soybean yield did not differ among treatments when grown on different straws in the first year of cultivation.


2022 ◽  
Vol 5 (1) ◽  
pp. 44
Author(s):  
Pranabendu Mitra ◽  
Sagar Khanvilkar ◽  
Sai Kumar Samudrala ◽  
Kaushal Sunil Shroff

The main objective of this study was to convert the cranberry pomace into value-added extruded cereals/snacks blending with rice flour using a single screw extruder based on the physicochemical properties of extrudates because utilization of the byproduct cranberry pomace would be necessary for the growth of cranberry juice processing industries and the extruded snacks/cereals with higher fiber and antioxidant and less carbohydrate would be required to fulfill the consumers’ demand. The six different formulations by blending 0, 5, 10, 15, 20 and 25% cranberry pomace with 100, 95, 90, 85, 80 and 75% of rice flour, respectively, were extruded using a single screw extruder. The temperature (150℃), screw speed (270 rpm), feed rate (20 Kg/hr) and feed moisture content (35%) were constant during extrusion. The physicochemical properties of the extrudates were characterized to determine the desirable formulations. The results indicated that radial expansion ratio (1.11-1.67), the solid density (0.71-0.76 g/mL), piece density (0.20-0.63 g/mL), porosity (14.49-72.38%), hardness (23-157.73 N), crispness (4.17-13.5), moisture content (3.22-4.39%), water activity (0.14-0.36) and the water solubility (7.07-30.80%) of rice flour and cranberry pomace blend extrudates were varied depending on the combinations of the rice flour and cranberry pomace. The results revealed that up to 20% cranberry pomace could be added with 75-80% rice flour to develop high fiber and antioxidant with less carbohydrate cereal/snack products. The utilization of cranberry pomace combining with rice flour through extrusion process can provide a unique opportunity to generate healthier snacks and cereals that have higher fiber and antioxidant and low carbohydrate.


2018 ◽  
Vol 38 (1) ◽  
pp. 112
Author(s):  
Erni Sofia Murtini ◽  
Ahmad Subagio ◽  
Sudarminto Setyo Yuwono ◽  
Irawan Setya Wardhana ◽  
Sulthon Fathoni

Brown sorghum is one of cereals with high prospective to be developed as a new source of staple food in Indonesia because it is easily cultivated and has high productivity. However, this grain has been overlooked because of limited available information of its potential used. Aims of this research are to evaluate the sorghum grain to comprehensibly obtain the basic information of its potential and limited factors as staple food. Research results that locally grown brown sorghum grain obtained from Grati, Pasuruan had a high milling yield (77.99±1.39%). The polished grain was composed by 79.40±4.63% starch and 10.62±0.01% protein. It indicated that this sorghum grain was highly prospective to be developed as a staple food. However, the grain also had some restrictive factors such as tannin (8.83±0.05 mg/g), phytic acid (1.80±0.47 mg/g) and anti-trypsin (17.18±2.38 unit/g). The main fraction of protein sorghum grain was Kafirin where this fraction contains a high disulphide bond (550.43±4.92 µmol/g). Bioavailability of protein sorghum evaluated by in vivo and in vitro methods were 51% and 48.45%, respectively. These values could be considered as low digestibility. The sorghum grain had dimension of  3.9±0.7 mm length, 3.2±0.2 mm width and 1.8±0.01 mm thick. Polishing of sorghum grain using rice polished machine could not effectively removed the testa layer due to different dimension of both sorghum and rice grain. This result suggests that appropriate assembly of equipment to effectively polish sorghum grain is needed. Presence of the anti- nutritional compounds and the low digestibility of protein sorghum prove that the brown sorghum grains require further processing technology such as fermentation to be more suitable as a staple food. ABSTRAKSorghum coklat merupakan biji-bijian yang potensial dikembangkan menjadi tanaman pangan di Indonesia. Kelebihan tanaman ini adalah kemudahannya untuk dibudidayakan dan produktivitas yang tinggi. Namun keterbatasan informasi tentang potensinya, membuat biji sorghum kurang diperhatikan. Tujuan Penelitian ini adalah untuk mendapatkan informasi dasar tentang potensi dan pembatas biji sorghum lokal varietas coklat sebagai tanaman pangan. Penelitian dilakukan dengan menganalisa biji sorghum yang telah disosoh dengan penyosoh beras 4 kali. Hasil penelitian menunjukkan biji sorghum lokal varietas coklat yang didapatkan dari Grati Pasuruan ini cukup berpotensi sebagai tanaman pangan. Biji  sosoh mempunyai kadar pati 79,40±4,63% dan protein yang tinggi yaitu 10,62±0,01%, selain itu rendemen sosoh juga tinggi mencapai  77,99±1,39%. Namun demikian, sorghum mengandung senyawa antigizi seperti tanin yang mencapai 8,83±0,05 mg/g, senyawa fitat 1,80±0,47 mg/g dan antitripsin 17,18±2,38 unit/g.  Protein sorghum didominasi (71,40±1,29%) oleh kafirin yang memiliki ikatan disulfit tinggi (550,43±4,92 µmol/g). Daya cerna protein sorghum tergolong rendah terlihat dari uji secara in vivo 0,51 atau 51% dan in vitro dengan enzim tripsin sebesar 48,45%. Dimensi biji sorghum dengan rata-rata 3,9±0,7 mm panjang, 3,2±0,2 mm lebar dan 1,8±0,01 mm tebal berbeda dengan biji beras sehingga kurang cocok bila dilakukan penyosohan dengan penyosoh beras. Kandungan senyawa antigizi yang cukup tinggi dan keberadaan ikatan disulfit yang cukup besar serta ditunjang oleh daya cerna protein yang rendah, menunjukkan biji sorghum perlu penanganan lanjutan misalnya dengan proses fermentasi untuk meningkatkan potensinya sebagai  bahan pangan.


Author(s):  
Gomes Acg ◽  
Lima Mcpm ◽  
Caliari M ◽  
Alves Dg ◽  
Machado Alb ◽  
...  

Due to the technological importance that the extrusion process represents in the application of fast food, the objective of this work was to apply pregelatinized rice and sorghum flours in the development of an instant preparation soup and to evaluate its centesimal, technological, and their sensorial analysis. Ten formulations of the instant soup were prepared from the mixtures experimental design. According to the experimental results, it can be stated that the predicted values corroborated with the experimental values, that is, a mixture was obtained for the instant soup with the characteristics of water absorption, water solubility, color, luminosity and viscosity close to the predicted by the models. After the physical and chemical analysis, the microbiological characterization of the best formulation defined by the desirability test was used, which demonstrated that the product is suitable to microbiological standards. The results obtained showed that the 80:10:10 instant soup formulation of pregelatinized rice flour, pregelatinized sorghum flour and potato starch allowed the experimental development of a new product with good nutritional characteristics benefits. It was obtained a food with good technological characteristics solubility and absorption in water, good viscosity, light color and with good sensory acceptance by the tasters.


Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 839
Author(s):  
Mitchell Kent ◽  
William Rooney

Interest in the use of popped sorghum in food products has resulted in a niche market for sorghum hybrids with high popping quality but little work has been done to assess the relative effects of field processing methods of grain on popping quality. This study evaluated the relative effects of harvest moisture and threshing methods on the popping quality of sorghum grain. A grain sorghum hybrid with good popping quality was produced during two different years in Texas wherein it was harvested at two moisture levels (low and high) and grain was removed from panicles using five different threshing methods (hand, rubber belt, metal brushes and two metal concave bar systems). Years, harvest moisture content and threshing method influenced all three popping quality measurements (popping efficacy, expansion ratio and flake size), but threshing method had an order of magnitude larger effect than either moisture level or year. While many of the interactions were significant, they did not influence the general trends observed. As such, the threshing methods with less direct impact force on the grain (hand and rubber belt) had higher popping quality than those samples threshed with greater impact force on the grain (metal-based systems). The popping quality differences between threshing system are likely due to a reduction in kernel integrity caused by the impacts to the kernel that occurred while threshing the grain. The results herein indicate that field processing of the grain, notably threshing method has significant impacts on the popping quality and should be taken into consideration when grain sorghum is harvested for popping purposes.


2018 ◽  
Vol 204 ◽  
pp. 00008
Author(s):  
Heru Suryanto ◽  
Alfian Widi Rahmawan ◽  
Solichin ◽  
Sahana Rizki Tata ◽  
Uun Yanuhar

The development of materials engineering has led to many significant discoveries one of which is biocomposite with its diverse applications. The addition of reinforcing materials in biopolymers improves the composite properties. This study aimed at investigating the effect of adding nanoclay on the tensile strength, morphology, functional group, and structure of extruded biocomposites with cassava starch matrix. This experimental research involved different concentrations of nanoclay i.e. 0%, 2.5%, 5%, 7.5%. The extrusion process was performed using a single screw extruder at 120°C. The samples were characterized by tensile testing, XRD, and SEM. The biocomposite reinforced with 5% nanoclay had the highest tensile strength of 10.8 MPa. The highest diffraction peak at 2θ of 19.4° appeared in the sample added with 5% nanoclay. The addition of excessive amounts of nanoclay can hinder the formation of exfoliated structures.


2008 ◽  
Vol 20 (2) ◽  
pp. 295 ◽  
Author(s):  
N. A. Czarny ◽  
K. E. Mate ◽  
J. C. Rodger

The spermatozoa of most marsupials lack nuclear stabilising disulfide-bonded protamines found in eutherian mammals. However, disulfide stabilisation has been observed in the acrosome of macropodid (Macropus eugenii) and phalangerid (Trichosurus vulpecula) marsupials. As a result this organelle, which is normally fragile in eutherian mammals, is robust and able to withstand physical and chemical challenge in these marsupials. The present study examined acrosomal characteristics of the spermatozoa of three dasyurid marsupials; the fat-tailed dunnart (Sminthopsis crassicaudata), eastern quoll (Dasyurus viverrinus) and northern quoll (Dasyurus hallucatus). In all species examined Bryan’s staining demonstrated that significant acrosomal loss occurred following physical challenge with osmotic stress, cryopreservation without cryoprotectant and exposure to detergent (Triton-X). Bromobimane staining indicated that the acrosomes of dasyurids lacked stabilising disulfide bonds. As reported for the wallaby and possum, calcium ionophore (A23187) did not induce the acrosome reaction-like exocytosis in dasyurid spermatozoa but treatment with diacylglycerol (DiC8) caused significant acrosome loss at concentrations similar to those effective for other marsupials. The present study found that the spermatozoa of dasyurids are more sensitive to physical challenge than the previously-studied marsupials and we suggest that this is due to the absence of acrosomal stabilising disulfide bonds.


2020 ◽  
Vol 1 (2) ◽  
pp. 7-16
Author(s):  
Winda Amilia ◽  
Andrew Setiawan Rusdianto ◽  
Arma Dwi Novemi

The amount of mango production in Indonesia is quite high, but the quality of postharvest mangoes is still quite low. The quality of the fruit will decline due to contamination; one of the contaminants is fungi. The way to reduce the damage of postharvest products is by coating applications. The purpose of this study was to study the physical, chemical and antifungal activities of harumanis mangoes’s quality which had been given coating during storage that could cause postharvest losses of harumanis mangoes. There are 3 treatments, each of them are respectively the provision of corn based coating  6% tobacco extract, 8% tobacco extract and 10% tobacco extract. The physical and chemical properties of the antifungal coating of tobacco extract made from corn coating for post-harvest damage on harumanis mangoes were obtained by weight loss, texture, colour, respiration rate, vitamin C and total dissolved solid. Preventing coating can prevent damage after harvest and protect the harumanis mango; therefore the quality of the mangoes can be maintained. The best results from the priority with the largest diameter inhibition zone were given corn starch 10% tobacco extract. Then the higher the concentration of extract used, the greater the diameter of the inhibition zone obtained. Based on all the tests performed (physical, chemical, and antifungal) the best treatment from the treatment was obtained that consisted of mangoes with antifungal layers of corn starch 10% tobacco extract. Because the P3 obtained the best results in maintaining physical, chemical content and fungi for 15 days.


Elkawnie ◽  
2017 ◽  
Vol 3 (2) ◽  
Author(s):  
Sri Jayanthi ◽  
Zulfan Arico

The research was conducted in January-September 2017 and will continue until December 2017 at Gunung Leuser National Park Resort Tenggulun, Aceh Tamiang District, Aceh Province. The method used to determine the vegetation density is purposive sampling by using a combination of line method and the method of with 20 m x 20 m. For determination of litter productivity by using Litter Trap method, and to analyze physical and chemical content of soil by laboratory test and calculate soil fauna density (biological factor) location determination by using line transect along 100 m, then on every line taken 10 point by method Systematic Sampling is systematically on the 3 (three) research sites that have been determined. Based on the research results for the highest density of tree vegetation found in plot 4 with the absolute density of 175 Ind/ ha this is in line with the highest litter productivity value also found at high density (plot 4) which is 14,5 gr/m2/week. Physical chemical factors are found in high density of air temperature 26 0C, humidity 80 %, soil temperature 25 0C, light intensity 118 Candella, soil pH 5.6, C-Organic 4.80 %, N-Total 0.55%, C/N of 4,24 %, P-Bray 23,03 ppm and K-tukar 0,41 Me/100.


Sign in / Sign up

Export Citation Format

Share Document