scholarly journals Synthesis of 3D-porous scaffold from cockle shells waste-based hydroxyapatite with addition silica from tin tailings

2021 ◽  
Vol 926 (1) ◽  
pp. 012044
Author(s):  
F Afriani ◽  
J Evi. ◽  
R A Rafsanjani ◽  
R Amelia ◽  
M Hudatwi ◽  
...  
Keyword(s):  
Diffraction Pattern ◽  
Goodness Of Fit ◽  
Porous Scaffold ◽  
Raw Materials ◽  
Synthesis Method ◽  
Decomposition Temperature ◽  
Porous Scaffolds ◽  
Xrd Pattern ◽  
Replication Method ◽  
Tailings Sand

Abstract This study aims to synthesize a porous scaffold based on hydroxyapatite and silica using the polymer sponge replication method. In bone tissue engineering technology, the development of porous scaffolds is a topic that is intensively studied because it is expected to be a solution to various problems of conventional bone therapy. In addition to proposing a porous scaffold synthesis method, we also utilize natural waste-based materials such as cockle shells and tin tailings as raw materials in this research. Investigation through x-ray diffraction (XRD) pattern with the goodness of fit coefficient, X 2 = 0.09 shows that the coprecipitation method is effective for the synthesis of hydroxyapatite. Analysis of XRD pattern of tin tailings sand with a value of X 2 = 0.008 showed that the diffraction pattern was related to silica with space group P 41 21 2. The polymer sponge replication method with polyurethane template succeeded in obtaining scaffolds with macropores above 300 μm. Based on the diffraction pattern of the three porous scaffolds prepared with different percentages of HA, it is known that all porous scaffolds have peaks related to HA and silica. It indicates that the decomposition temperature of polymer does not provide sufficient energy for the HA and silica to transform or react chemically.

scholarly journals Preparation of Nanoparticle Porous-Structured BiVO4 Photoanodes by a New Two-Step Electrochemical Deposition Method for Water Splitting

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 136
Author(s):  
SocMan Ho-Kimura ◽  
Wasusate Soontornchaiyakul ◽  
Yuichi Yamaguchi ◽  
Akihiko Kudo
Keyword(s):  
Water Splitting ◽  
Electrochemical Deposition ◽  
Synthesis Method ◽  
Stoichiometric Ratio ◽  
Deposition Method ◽  
Hydrogen Electrode ◽  
Faradaic Efficiency ◽  
Xrd Pattern ◽  
Conversion Reaction ◽  
Electrochemical Deposition Method

In the synthesis method of a BiVO4 photoanode via BiOI flakes, a BiOI film is formed by electrochemical deposition in Step 1, and a vanadium (V) source solution is placed by drop-casting on the BiOI film in Step 2. Following this, BiVO4 particles are converted from the BiOI–(V species) precursors by annealing. However, it is challenging to evenly distribute vanadium species among the BiOI flakes. As a result, the conversion reaction to form BiVO4 does not proceed simultaneously and uniformly. To address this limitation, in Step 2, we developed a new electrochemical deposition method that allowed the even distribution of V2O5 among Bi–O–I flakes to enhance the conversion reaction uniformly. Furthermore, when lactic acid was added to the electrodeposition bath solution, BiVO4 crystals with an increased (040) peak intensity of the X-ray diffractometer (XRD) pattern were obtained. The photocurrent of the BiVO4 photoanode was 2.2 mA/cm2 at 1.23 V vs. reversible hydrogen electrode (RHE) under solar simulated light of 100 mW/cm2 illumination. The Faradaic efficiency of oxygen evolution was close to 100%. In addition, overall water splitting was performed using a Ru/SrTiO3:Rh–BiVO4 photocatalyst sheet prepared by the BiVO4 synthesis method. The corresponding hydrogen and oxygen were produced in a 2:1 stoichiometric ratio under visible light irradiation.

scholarly journals Recent Advances in Fabrication of Non-Isocyanate Polyurethane-Based Composite Materials

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3497
Author(s):  
Piotr Stachak ◽  
Izabela Łukaszewska ◽  
Edyta Hebda ◽  
Krzysztof Pielichowski
Keyword(s):  
Raw Materials ◽  
Synthesis Method ◽  
Polymeric Materials ◽  
Original Research ◽  
Significant Group ◽  
Oh Groups ◽  
New Class ◽  
Hazardous Chemical ◽  
Wide Range

Polyurethanes (PUs) are a significant group of polymeric materials that, due to their outstanding mechanical, chemical, and physical properties, are used in a wide range of applications. Conventionally, PUs are obtained in polyaddition reactions between diisocyanates and polyols. Due to the toxicity of isocyanate raw materials and their synthesis method utilizing phosgene, new cleaner synthetic routes for polyurethanes without using isocyanates have attracted increasing attention in recent years. Among different attempts to replace the conventional process, polyaddition of cyclic carbonates (CCs) and polyfunctional amines seems to be the most promising way to obtain non-isocyanate polyurethanes (NIPUs) or, more precisely, polyhydroxyurethanes (PHUs), while primary and secondary –OH groups are being formed alongside urethane linkages. Such an approach eliminates hazardous chemical compounds from the synthesis and leads to the fabrication of polymeric materials with unique and tunable properties. The main advantages include better chemical, mechanical, and thermal resistance, and the process itself is invulnerable to moisture, which is an essential technological feature. NIPUs can be modified via copolymerization or used as matrices to fabricate polymer composites with different additives, similar to their conventional counterparts. Hence, non-isocyanate polyurethanes are a new class of environmentally friendly polymeric materials. Many papers on the matter above have been published, including both original research and extensive reviews. However, they do not provide collected information on NIPU composites fabrication and processing. Hence, this review describes the latest progress in non-isocyanate polyurethane synthesis, modification, and finally processing. While focusing primarily on the carbonate/amine route, methods of obtaining NIPU are described, and their properties are presented. Ways of incorporating various compounds into NIPU matrices are characterized by the role of PHU materials in copolymeric materials or as an additive. Finally, diverse processing methods of non-isocyanate polyurethanes are presented, including electrospinning or 3D printing.

Fabrication of poly (1, 8-octanediol-co-Pluronic F127 citrate)/chitin nanofibril/bioactive glass (POFC/ChiNF/BG) porous scaffold via directional-freeze-casting

2020 ◽  
Vol 40 (7) ◽  
pp. 591-599
Author(s):  
Yaling Tian ◽  
Kai Liang ◽  
Yali Ji
Keyword(s):  
Bioactive Glass ◽  
Porous Structure ◽  
Pore Structure ◽  
Porous Scaffold ◽  
Pluronic F127 ◽  
Porous Scaffolds ◽  
Freeze Casting ◽  
Promising Candidate ◽  
Complete Replacement

AbstractThe citrate-based thermoset elastomer is a promising candidate for bone scaffold material, but the harsh curing condition made it difficult to fabricate porous structure. Recently, poly (1, 8-octanediol-co-Pluronic F127 citrate) (POFC) porous scaffold was creatively fabricated by chitin nanofibrils (ChiNFs) supported emulsion-freeze-casting. Thanks to the supporting role of ChiNFs, the lamellar pore structure formed by directional freeze-drying was maintained during the subsequent thermocuring. Herein, bioactive glass (BG) was introduced into the POFC porous scaffolds to improve bioactivity. It was found the complete replacement of ChiNF particles with BG particles could not form a stable porous structure; however, existing at least 15 wt% ChiNF could ensure the formation of lamellar pore, and the interlamellar distance increased with BG ratios. Thus, the BG granules did not contribute to the formation of pore structure like ChiNFs, however, they surely endowed the scaffolds with enhanced mechanical properties, improved osteogenesis bioactivity, better cytocompatibility as well as quick degradation rate. Reasonably adjusting BG ratios could balance the requirements of porous structure and bioactivity.

scholarly journals Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 334
Author(s):  
Aidong Xia ◽  
Jie Yin ◽  
Xiao Chen ◽  
Zhengren Huang ◽  
Xuejian Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Flexural Strength ◽  
Hot Pressing ◽  
Raw Materials ◽  
Secondary Phase ◽  
Pressing Temperature ◽  
Xrd Pattern ◽  
Mean Grain Size ◽  
The Mean

In this work, a (SiC-AlN)/ZrB2 composite with outstanding mechanical properties was prepared by using polymer-derived ceramics (PDCs) and hot-pressing technique. Flexural strength reached up to 460 ± 41 MPa, while AlN and ZrB2 contents were 10 wt%, and 15 wt%, respectively, under a hot-pressing temperature of 2000 °C. XRD pattern-evidenced SiC generated by pyrolysis of polycarbosilane (PCS) was mainly composed by 2H-SiC and 4H-SiC, both belonging to α-SiC. Micron-level ZrB2 secondary phase was observed inside the (SiC-AlN)/ZrB2 composite, while the mean grain size (MGS) of SiC-AlN matrix was approximately 97 nm. This unique nano-micron hybrid microstructure enhanced the mechanical properties. The present investigation provided a feasible tactic for strengthening ceramics from PDCs raw materials.

Influence of the synthesis method of tert-butylated triphenyl phosphates on the operational properties of fire-resistant fluids

2021 ◽  
Vol 02 ◽  
pp. 32-37
Author(s):  
A.S. Medzhibovskiy ◽  
◽  
A.S. Kolokolnikov ◽  
A.O. Savchenko ◽  
G.A. Poldushova ◽  
...  
Keyword(s):  
Gas Turbines ◽  
Power Plants ◽  
Phosphorus Oxychloride ◽  
Raw Materials ◽  
Hydrolytic Stability ◽  
Synthesis Method ◽  
Acid Number ◽  
Release Time ◽  
Triphenyl Phosphate ◽  
Prolonged Contact

Three substituted aryl esters of orthophosphoric acid are the base component of fire-resistant fluids used in the lubricating and electro-hydraulic control system at steam and gas turbines of power plants. In this paper, we studied the possibility of improving the physicochemical and performance properties of phosphates, which are made of the raw materials available in the Russian Federation: phenol and 4-tert-butylphenol by reducing the content of an undesirable component - unsubstituted triphenyl phosphate, which is particularly vulnerable towards water. According to the results of the work, the conclusions were made: - a decrease in the content of triphenyl phosphate to a level of 1% and below leads to some improvement (reduction) of the air release time and an increase in the hydrolytic stability (represented as reducing the change in acid number after prolonged contact with water) of the fire-resistant fluid based on mixed esters. The degree of change of these properties is quantified. - it is possible to achieve the minimum content of triphenyl phosphate by changing the phosphorylation technology. By carrying out the process stepwise, the possibility of the interaction of phosphorus oxychloride with unsubstituted phenol is substantially eliminated, that is why there is almost no probability of an undesirable component formation in the resulting mixture of esters.

scholarly journals Structures and Properties of Self - crosslinking Silicone Resin

2018 ◽  
Vol 38 ◽  
pp. 02019
Author(s):  
Yong-xin Zhao ◽  
Ying-qiang Zhang
Keyword(s):  
Thermal Decomposition ◽  
Raw Materials ◽  
Decomposition Temperature ◽  
Light Transmittance ◽  
Silicone Resin ◽  
Structures And Properties ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Good Heat Resistance ◽  
Good Heat

Highly transparent silicone resin with self-crosslinking structure was prepared using phenyltrimethoxysilane, diphenyldimethoxysilane, 1,3,5,7-cyclotetra(methyl siloxane) and bisvinyltetramethyldisiloxane as main raw materials. The structure of silicone resin was determined by Fourier Transform Infrared Spectroscopy (FT-IR). The light transmittance was measured by UV-Vis spectroscopy. Thermogravimetric analysis (TGA) was used to study the thermal decomposition process. The microstructure of cured self-crosslinking silicone resin is more uniform, resulting in better light transmittance up to 100% in the range of 400nm ~ 800nm. The cured has relatively good heat resistance, the initial thermal decomposition temperature of the cured could be up to 315.8 °C. SEM observations show that the self-crosslinking silicone has a uniform, textured structure, higher transparency compared with the existing condensation silicone material, and can be used as advanced architectural translucent materials and optics packaging materials.

scholarly journals Porous Geometry Guided Micro-mechanical Environment Within Scaffolds for Cell Mechanobiology Study in Bone Tissue Engineering

2021 ◽  
Vol 9 ◽  
Author(s):  
Feihu Zhao ◽  
Yi Xiong ◽  
Keita Ito ◽  
Bert van Rietbergen ◽  
Sandra Hofmann
Keyword(s):  
Porous Scaffold ◽  
Mechanical Strain ◽  
Three Dimensional ◽  
Pore Geometry ◽  
Cell Physiology ◽  
Porous Scaffolds ◽  
Mechanical Environment ◽  
Functional Features ◽  
Future Work

Mechanobiology research is for understanding the role of mechanics in cell physiology and pathology. It will have implications for studying bone physiology and pathology and to guide the strategy for regenerating both the structural and functional features of bone. Mechanobiological studies in vitro apply a dynamic micro-mechanical environment to cells via bioreactors. Porous scaffolds are commonly used for housing the cells in a three-dimensional (3D) culturing environment. Such scaffolds usually have different pore geometries (e.g. with different pore shapes, pore dimensions and porosities). These pore geometries can affect the internal micro-mechanical environment that the cells experience when loaded in the bioreactor. Therefore, to adjust the applied micro-mechanical environment on cells, researchers can tune either the applied load and/or the design of the scaffold pore geometries. This review will provide information on how the micro-mechanical environment (e.g. fluid-induced wall shear stress and mechanical strain) is affected by various scaffold pore geometries within different bioreactors. It shall allow researchers to estimate/quantify the micro-mechanical environment according to the already known pore geometry information, or to find a suitable pore geometry according to the desirable micro-mechanical environment to be applied. Finally, as future work, artificial intelligent – assisted techniques, which can achieve an automatic design of solid porous scaffold geometry for tuning/optimising the micro-mechanical environment are suggested.

scholarly journals The Effects of Sintering Temperature and Agro Wastes on the Properties of Insulation Bricks

2020 ◽  
Vol 17 (2) ◽  
pp. 113-119
Author(s):  
H.E. Mgbemere ◽  
E.O. Obidiegwu ◽  
A.U. Ubong
Keyword(s):  
Rice Husk ◽  
Raw Materials ◽  
Synthesis Method ◽  
Linear Shrinkage ◽  
Absorption Capacity ◽  
Modulus Of Rupture ◽  
Composition Analysis ◽  
Cold Crushing Strength ◽  
Two Temperatures ◽  
Ball Clay

In this research, kaolin, ball clay, sawdust and rice husk were used to produce insulation bricks through the solid state synthesis method. Two temperatures, 1100oC and 1200oC were used to sinter the green samples. X-ray fluorescence, scanning electron microscopy, compressive strength tests etc. were used to analyse the properties of the produced bricks. Chemical composition analysis on the starting raw materials showed that SiO2 and Al2O3 were the major constituents while Fe2O3, Na2O, K2O and TiO2 were the minor constituents. As the amounts of kaolin used in preparing the samples decrease, the bulk density, modulus of rupture and cold crushing strength of the bricks decreases while the water absorption capacity, linear shrinkage increases. The thermal analysis showed that on heating the samples, the reactions were mainly exothermic with between 8 to 10 mW/mg of heat released. The morphology of the samples showed that the pores began to collapse when the amount of kaolin present is below 70 wt. %. Sintering the samples at 1100oC and 1200oC led to slightly different values in the results and is therefore very significant. Keywords: Insulation bricks, Kaolin, sawdust, rice husk, temperature effects

scholarly journals In Vivo Vascularization of Anisotropic Channeled Porous Polylactide-Based Capsules for Islet Transplantation: The Effects of Scaffold Architecture and Implantation Site

2015 ◽  
pp. S75-S84 ◽  
Author(s):  
N. KASOJU ◽  
D. KUBIES ◽  
E. FÁBRYOVÁ ◽  
J. KŘÍŽ ◽  
M. M. KUMOREK ◽  
...  
Keyword(s):  
Islet Transplantation ◽  
Porous Scaffold ◽  
Oxygen Demand ◽  
Inflammatory Cells ◽  
Host Cells ◽  
Cell Infiltration ◽  
Greater Omentum ◽  
Brown Norway ◽  
Porous Scaffolds

The replacement of pancreatic islets for the possible treatment of type 1 diabetes is limited by the extremely high oxygen demand of the islets. To this end, here we hypothesize to create a novel extra-hepatic highly-vascularized bioartificial cavity using a porous scaffold as a template and using the host body as a living bioreactor for subsequent islet transplantation. Polylactide-based capsular-shaped anisotropic channeled porous scaffolds were prepared by following the unidirectional thermally-induced phase separation technique, and were implanted under the skin and in the greater omentum of Brown Norway rats. Polyamide mesh-based isotropic regular porous capsules were used as the controls. After 4weeks, the implants were excised and analyzed by histology. The hematoxylin and eosin, as well as Masson's trichrome staining, revealed a) low or no infiltration of giant inflammatory cells in the implant, b) minor but insignificant fibrosis around the implant, c) guided infiltration of host cells in the test capsule in contrast to random cell infiltration in the control capsule, and d) relatively superior cell infiltration in the capsules implanted in the greater omentum than in the capsules implanted under the skin. Furthermore, the anti-CD31 immunohistochemistry staining revealed numerous vessels at the implant site, but mostly on the external surface of the capsules. Taken together, the current study, the first of its kind, is a significant step-forward towards engineering a bioartificial microenvironment for the transplantation of islets.

scholarly journals ASSESSING THE FACTORS CAUSING PROJECT COMPLETION DELAYS IN THE CONSTRUCTION SECTOR OF OMAN USING SEM-PLS

2020 ◽  
Vol 8 (3) ◽  
pp. 900-912 ◽  
Author(s):  
Iman Suleiman Al Maktoumi ◽  
Firdouse Rahman Khan ◽  
Ahmed Rashid Suwied Al Maktoumi
Keyword(s):  
Structural Equation ◽  
Construction Projects ◽  
Goodness Of Fit ◽  
Raw Materials ◽  
Equation Modeling ◽  
Related Factors ◽  
Formative Measurement ◽  
Project Completion ◽  
Measurement Models ◽  
Process Allocation

Purpose: The objectives of the study were to investigate the causes of the delays to analyze the factors causing the construction delay in Oman and to investigate the effects of such delays. Design/methodology/approach: To carry out this study 210 samples were collected through a well-defined questionnaire from the construction stakeholders viz. the consultants, contractors, and the clients who were selected on a random sampling basis. Smart PLS for Structural Equation Modeling (SEM) technique was used to analyze the data to obtain the formative measurement models, the structured model, and the goodness of fit. Findings: The results of the study reveal that the client-related factors, equipment-related factors, and material related factors have a significant impact on the completion delay in construction projects. The findings of the study also revealed that the Client related factors were – Delay in providing services, Delayed decision-making process, Allocation of insufficient time. Equipment related factors were – Existing low productive equipment, Unskillful Equipment operator, Breakdown of equipment and Outdated equipment; Material related factors were – Delay in supply of raw materials, Non-availability of materials, Change of materials during construction, Non-availability of accessories and Damaged materials. Research limitations/Implications: The present study covers the stakeholders of the construction projects from selected regions only. The future studies can be extended to other projects and other regions as well. Social implications: The study suggested that the clients’ cooperation especially in providing the contractors with the necessary equipment, facilities, and sufficient time will avoid such delays of the construction projects in Oman. Originality/Value: Only very few have examined the completion delay of the construction projects in Oman using SEM-PLS and it is a first-hand study of its kind and the results will be useful to the stakeholders.

Sign in / Sign up

Export Citation Format

Share Document