Evaluating test methods by estimating total error

1994 ◽  
Vol 40 (3) ◽  
pp. 464-471 ◽  
Author(s):  
V M Chinchilli ◽  
W G Miller
Keyword(s):  
Coefficient Of Variation ◽  
Total Error ◽  
Test Methods ◽  
Repeated Measurements ◽  
Relative Bias ◽  
Test Method ◽  
Individual Subject ◽  
Common Procedure ◽  
The Individual ◽  
Upper Tolerance Limit

Abstract A common procedure for evaluating a test method by comparison with another, well-accepted method has been to use a repeated measurements design, in which several individual subjects' specimens are assayed with both methods. We propose the use of the intrasubject relative mean square error, which is a function of the intrasubject relative bias and the coefficient of variation of the test method, as a measure of total error. We construct for each individual subject a score that is based on how well an individual's estimate of total error compares with a maximum allowable value. If the individual's score is > 100%, then that individual's estimate of total error exceeds the maximum allowable value. We present a distribution-free statistical methodology for evaluating the sample of scores. This involves the construction of an upper tolerance limit to determine whether the test method yields values of the total error that are acceptable for most of the population with some level of confidence. Our definition of total error is very different from that defined in the National Cholesterol Education Program (NCEP) guidelines. The NCEP bound for total error has three main problems: (a) it incorrectly assumes that the standard error of the estimated relative bias is the test coefficient of variation; (b) it incorrectly assumes that the individual estimated relative biases follow gaussian distributions; (c) it is based on requiring the relative bias of the average individual in the population to lie within prescribed limits, whereas we believe it is more important to require the total error for most of the individuals in the population, say 95%, to lie within prescribed limits.

An evaluation of ECT sample height for small flute board grades and Box Manufacturer’s Certification compliance

TAPPI Journal ◽  
2009 ◽  
Vol 8 (6) ◽  
pp. 24-28
Author(s):  
CORY JAY WILSON ◽  
BENJAMIN FRANK
Keyword(s):  
Compressive Strength ◽  
Compressive Load ◽  
Test Sample ◽  
Test Methods ◽  
Test Method ◽  
Initial Development ◽  
Sample Height ◽  
Relationship Of ◽  
The Relationship ◽  
Corrugated Fiberboard

TAPPI test T811 is the specified method to ascertain ECT relative to box manufacturer’s certification compliance of corrugated fiberboard under Rule 41/ Alternate Item 222. T811 test sample heights were derived from typical board constructions at the time of the test method’s initial development. New, smaller flute sizes have since been developed, and the use of lighter weight boards has become more common. The T811 test method includes sample specifications for typical A-flute, B-flute, and C-flute singlewall (and doublewall and triplewall) structures, but not for newer thinner E-flute or F-flute structures. This research explores the relationship of ECT sample height to measured compressive load, in an effort to determine valid E-flute and F-flute ECT sample heights for use with the T811 method. Through this process, it identifies challenges present in our use of current ECT test methods as a measure of intrinsic compressive strength for smaller flute structures. The data does not support the use of TAPPI T 811 for ECT measurement for E and F flute structures, and demonstrates inconsistencies with current height specifi-cations for some lightweight B flute.

Stasis Anxiety

2017 ◽  
Author(s):  
Andrew van der Vlies
Keyword(s):  
South Africa ◽  
Civil War ◽  
Black Writers ◽  
Political Rights ◽  
Ancient Greek ◽  
Individual Subject ◽  
Starting Point ◽  
The Individual ◽  
Past Experiences ◽  
Contemporary Writing

Two recent debut novels, Songeziwe Mahlangu’s Penumbra (2013) and Masande Ntshanga’s The Reactive (2014), reflect the experience of impasse, stasis, and arrested development experienced by many in South Africa. This chapter uses these novels as the starting point for a discussion of writing by young black writers in general, and as representative examples of the treatment of ‘waithood’ in contemporary writing. It considers (spatial and temporal) theorisations of anxiety, discerns recursive investments in past experiences of hope (invoking Jennifer Wenzel’s work to consider the afterlives of anti-colonial prophecy), assesses the usefulness of Giorgio Agamben’s elaboration of the ancient Greek understanding of stasis as civil war, and asks how these works’ elaboration of stasis might be understood in relation to Wendy Brown’s discussion of the eclipsing of the individual subject of political rights by the neoliberal subject whose very life is framed by its potential to be understood as capital.

scholarly journals Comprehensive Parameters Identification and Dynamic Model Validation of Interior-Mount Line-Start Permanent Magnet Synchronous Motors

Machines ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 4 ◽  
Author(s):  
Luqman S. Maraaba ◽  
Zakariya M. Al-Hamouz ◽  
Abdulaziz S. Milhem ◽  
Ssennoga Twaha
Keyword(s):  
Mathematical Model ◽  
Permanent Magnet ◽  
High Efficiency ◽  
Experimental Tests ◽  
Induction Machines ◽  
Test Methods ◽  
Operating Conditions ◽  
Test Method ◽  
Permanent Magnet Synchronous Motors ◽  
Synchronous Motors

The application of line-start permanent magnet synchronous motors (LSPMSMs) is rapidly spreading due to their advantages of high efficiency, high operational power factor, being self-starting, rendering them as highly needed in many applications in recent years. Although there have been standard methods for the identification of parameters of synchronous and induction machines, most of them do not apply to LSPMSMs. This paper presents a study and analysis of different parameter identification methods for interior mount LSPMSM. Experimental tests have been performed in the laboratory on a 1-hp interior mount LSPMSM. The measurements have been validated by investigating the performance of the machine under different operating conditions using a developed qd0 mathematical model and an experimental setup. The dynamic and steady-state performance analyses have been performed using the determined parameters. It is found that the experimental results are close to the mathematical model results, confirming the accuracy of the studied test methods. Therefore, the output of this study will help in selecting the proper test method for LSPMSM.

scholarly journals Concept and Realization of a Novel Test Method Using a Dynamic Test Stand for Detecting Persons by Sensor Systems on Autonomous Agricultural Robotics

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2315
Author(s):  
Christian Meltebrink ◽  
Tom Ströer ◽  
Benjamin Wegmann ◽  
Cornelia Weltzien ◽  
Arno Ruckelshausen
Keyword(s):  
Environmental Conditions ◽  
Dynamic Test ◽  
Test Methods ◽  
Test Stand ◽  
Human Detection ◽  
Test Method ◽  
Sensor Systems ◽  
Functional Safety ◽  
Agricultural Robots ◽  
Agricultural Robotics

As an essential part for the development of autonomous agricultural robotics, the functional safety of autonomous agricultural machines is largely based on the functionality and robustness of non-contact sensor systems for human protection. This article presents a new step in the development of autonomous agricultural machine with a concept and the realization of a novel test method using a dynamic test stand on an agricultural farm in outdoor areas. With this test method, commercially available sensor systems are tested in a long-term test around the clock for 365 days a year and 24 h a day on a dynamic test stand in continuous outdoor use. A test over a longer period of time is needed to test as much as possible all occurring environmental conditions. This test is determined by the naturally occurring environmental conditions. This fact corresponds to the reality of unpredictable/determinable environmental conditions in the field and makes the test method and test stand so unique. The focus of the developed test methods is on creating own real environment detection areas (REDAs) for each sensor system, which can be used to compare and evaluate the autonomous human detection of the sensor systems for the functional safety of autonomous agricultural robots with a humanoid test target. Sensor manufacturers from industry and the automotive sector provide their sensor systems to have their sensors tested in cooperation with the TÜV.

scholarly journals Physical Activity and Redox Balance in the Elderly: Signal Transduction Mechanisms

2021 ◽  
Vol 11 (5) ◽  
pp. 2228
Author(s):  
Daniela Galli ◽  
Cecilia Carubbi ◽  
Elena Masselli ◽  
Mauro Vaccarezza ◽  
Valentina Presta ◽  
...  
Keyword(s):  
Physical Activity ◽  
Molecular Mechanisms ◽  
Vascular Tissue ◽  
The Elderly ◽  
Redox Balance ◽  
Antioxidant Systems ◽  
Targeted Prevention ◽  
Individual Subject ◽  
Aged People ◽  
The Individual

Reactive Oxygen Species (ROS) are molecules naturally produced by cells. If their levels are too high, the cellular antioxidant machinery intervenes to bring back their quantity to physiological conditions. Since aging often induces malfunctioning in this machinery, ROS are considered an effective cause of age-associated diseases. Exercise stimulates ROS production on one side, and the antioxidant systems on the other side. The effects of exercise on oxidative stress markers have been shown in blood, vascular tissue, brain, cardiac and skeletal muscle, both in young and aged people. However, the intensity and volume of exercise and the individual subject characteristics are important to envisage future strategies to adequately personalize the balance of the oxidant/antioxidant environment. Here, we reviewed the literature that deals with the effects of physical activity on redox balance in young and aged people, with insights into the molecular mechanisms involved. Although many molecular pathways are involved, we are still far from a comprehensive view of the mechanisms that stand behind the effects of physical activity during aging. Although we believe that future precision medicine will be able to transform exercise administration from wellness to targeted prevention, as yet we admit that the topic is still in its infancy.

Research the Test Method of the Voltage Transformer Secondary Load in the Three-Phase Three-Wire Electric Energy Metering Device

2014 ◽  
Vol 687-691 ◽  
pp. 3110-3115
Author(s):  
Gu Li ◽  
Zi Ming Fu ◽  
Jie Feng Yan ◽  
Bing Wen Li ◽  
Zhi Rong Cen
Keyword(s):  
Power Supply System ◽  
Electric Energy ◽  
Test Methods ◽  
Test Method ◽  
Testing Methods ◽  
Voltage Transformer ◽  
Secondary Load ◽  
Three Phase ◽  
Energy Metering ◽  
Definition Of

This paper analyzes and studies the definition of the voltage transformer secondary load, examines the practical purposes of the measured values of the voltage transformer secondary load, and presents a variety of testing methods to analyze and compare the differences. This paper gives the test methods of the voltage transformer secondary load when the connection of the voltage transformer is the Y / Y in a three-phase three-wire power supply system, filling the blank of this type of test method in the industry. When other units within the industry carry out such work, the conclusions of this paper are available for reference, and the conclusions of this paper can be referred when drafting relevant regulations in the future.

scholarly journals Controlling response dependence in the measurement of change using the Rasch model

2017 ◽  
Vol 27 (12) ◽  
pp. 3709-3725 ◽  
Author(s):  
David Andrich
Keyword(s):  
Rasch Model ◽  
Real Data ◽  
Repeated Measurements ◽  
Measurement Of Change ◽  
Location Parameters ◽  
Response Dependence ◽  
The Individual ◽  
First Time ◽  
The Rasch Model ◽  
Research And Policy

The advantages of using person location estimates from the Rasch model over raw scores for the measurement of change using a common test include the linearization of scores and the automatic handling of statistical properties of repeated measurements. However, the application of the model requires that the responses to the items are statistically independent in the sense that the specific responses to the items on the first time of testing do not affect the responses at a second time. This requirement implies that the responses to the items at both times of assessment are governed only by the invariant location parameters of the items at the two times of testing and the location parameters of each person each time. A specific form of dependence that is pertinent when the same items are used is when the observed response to an item at the second time of testing is affected by the response to the same item at the first time, a form of dependence which has been referred to as response dependence. This paper presents the logic of applying the Rasch model to quantify, control and remove the effect of response dependence in the measurement of change when the same items are used on two occasions. The logic is illustrated with four sets of simulation studies with dichotomous items and with a small example of real data. It is shown that the presence of response dependence can reduce the evidence of change, a reduction which may impact interpretations at the individual, research, and policy levels.

Analysis of the Test Method of Quartz Glass Optical Homogeneity

2017 ◽  
Vol 726 ◽  
pp. 414-418
Author(s):  
Bo Fu ◽  
Hui Wang ◽  
Zhu Feng Shao
Keyword(s):  
Quartz Glass ◽  
Measurement Accuracy ◽  
Test Methods ◽  
Test Method ◽  
Wavefront Aberration ◽  
Optical Homogeneity ◽  
Advantages And Disadvantages ◽  
Interference Measurement ◽  
Optical Quartz Glass

The optical quartz glass is widely applied in optical system , photo communications，inertial navigation，etc.It must have high optical homogeneity. Optical homogeneity of the optical quartz glass directly affects the wavefront quality of the optical transmission system, and changes the wavefront aberration of the system. How to accurately determine the optical homogeneity of the quartz glass is especially important. Currently，the method of test for optical homogeneity mainly used by interference principle. This paper analyzes various existing interference measurement method and test equipment. Summarized the advantages and disadvantages of various test methods，using range and measurement accuracy.

Sign in / Sign up

Export Citation Format

Share Document