Consistent quantification of the impact of key mission design parameters on the performance of next-generation gravity missions

2020 ◽  
Vol 221 (2) ◽  
pp. 1190-1210 ◽  
Author(s):  
Anna F Purkhauser ◽  
Christian Siemes ◽  
Roland Pail
Keyword(s):  
Gravity Field ◽  
Laser Interferometry ◽  
Limiting Factors ◽  
Mission Design ◽  
Design Parameters ◽  
Ocean Tide ◽  
Single Pair ◽  
Post Processing ◽  
Satellite Gravity ◽  
The Impact

SUMMARY The GRACE and GRACE-FO missions have been observing time variations of the Earth's gravity field for more than 15 yr. For a possible successor mission, the need to continue mass change observations have to be balanced with the ambition for monitoring capabilities with an enhanced spatial and temporal resolution that will enable improved scientific results and will serve operational services and applications. Various study groups performed individual simulations to analyse different aspects of possible NGGMs from a scientific and technical point of view. As these studies are not directly comparable due to different assumptions regarding mission design and instrumentation, the goal of this paper is to systematically analyse and quantify the key mission parameters (number of satellite pairs, orbit altitude, sensors) and the impact of various error sources (AO, OT models, post-processing) in a consistent simulation environment. Our study demonstrates that a single-pair mission with laser interferometry in a low orbit with a drag compensation system would be the only possibility within the single-pair options to increase the performance compared to the GRACE/GRACE-FO. Tailored post-processing is not able to achieve the same performance as a double-pair mission without post-processing. Also, such a mission concept does not solve the problems of temporal aliasing due to observation geometry. In contrast, double-pair concepts have the potential to retrieve the full AOHIS signal and in some cases even double the performance to the comparable single-pair scenario. When combining a double-pair with laser interferometry and an improved accelerometer, the sensor noise is, apart from the ocean tide modelling errors, one of the limiting factors. Therefore, the next big step for observing the gravity field globally with a satellite mission can only be taken by launching a double pair mission. With this quantification of key architecture features of a future satellite gravity mission, the study aims to improve the available information to allow for an informed decision making and give an indication of priority for the different mission concepts.

Effect of Ocean Tide on Recovery of Satellite Gravity Field

2007 ◽  
Vol 50 (1) ◽  
pp. 116-123 ◽  
Author(s):  
Jiang-Cun ZHOU ◽  
He-Ping SUN
Keyword(s):  
Gravity Field ◽  
Ocean Tide ◽  
Satellite Gravity

Design of a Robust Memristive Spiking Neuromorphic System with Unsupervised Learning in Hardware

2021 ◽  
Vol 17 (4) ◽  
pp. 1-26
Author(s):  
Md Musabbir Adnan ◽  
Sagarvarma Sayyaparaju ◽  
Samuel D. Brown ◽  
Mst Shamim Ara Shawkat ◽  
Catherine D. Schuman ◽  
...  
Keyword(s):  
Unsupervised Learning ◽  
Recognition Task ◽  
Single Layer ◽  
Process Variations ◽  
Spike Timing ◽  
System Level ◽  
Design Parameters ◽  
Digital Pulse ◽  
Neuromorphic System ◽  
The Impact

Spiking neural networks (SNN) offer a power efficient, biologically plausible learning paradigm by encoding information into spikes. The discovery of the memristor has accelerated the progress of spiking neuromorphic systems, as the intrinsic plasticity of the device makes it an ideal candidate to mimic a biological synapse. Despite providing a nanoscale form factor, non-volatility, and low-power operation, memristors suffer from device-level non-idealities, which impact system-level performance. To address these issues, this article presents a memristive crossbar-based neuromorphic system using unsupervised learning with twin-memristor synapses, fully digital pulse width modulated spike-timing-dependent plasticity, and homeostasis neurons. The implemented single-layer SNN was applied to a pattern-recognition task of classifying handwritten-digits. The performance of the system was analyzed by varying design parameters such as number of training epochs, neurons, and capacitors. Furthermore, the impact of memristor device non-idealities, such as device-switching mismatch, aging, failure, and process variations, were investigated and the resilience of the proposed system was demonstrated.

scholarly journals Post-Processing Techniques for the Improvement of Liposome Stability

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1023
Author(s):  
Ji Young Yu ◽  
Piyanan Chuesiang ◽  
Gye Hwa Shin ◽  
Hyun Jin Park
Keyword(s):  
Freeze Drying ◽  
Protective Agent ◽  
Post Processing ◽  
Additional Process ◽  
Spray Freeze Drying ◽  
The Stability ◽  
Processing Techniques ◽  
The Impact ◽  
Self Aggregation ◽  
Liposome Stability

Liposomes have been utilized as a drug delivery system to increase the bioavailability of drugs and to control the rate of drug release at the target site of action. However, the occurrence of self-aggregation, coalescence, flocculation and the precipitation of aqueous liposomes during formulation or storage can cause degradation of the vesicle structure, leading to the decomposition of liposomes. To increase the stability of liposomes, post-processing techniques have been applied as an additional process to liposomes after formulation to remove water and generate dry liposome particles with a higher stability and greater accessibility for drug administration in comparison with aqueous liposomes. This review covers the effect of these techniques including freeze drying, spray drying and spray freeze drying on the stability, physicochemical properties and drug encapsulation efficiency of dry liposomes. The parameters affecting the properties of liposomes during the drying process are also highlighted in this review. In addition, the impact of using a protective agent to overcome such limitations of each process is thoroughly discussed through various studies.

Making Up 3D Bodies

2021 ◽  
Vol 4 (2) ◽  
pp. 1-9
Author(s):  
Kiona Hagen Niehaus ◽  
Rebecca Fiebrink
Keyword(s):  
Software Tool ◽  
The Body ◽  
Design Parameters ◽  
Artistic Practice ◽  
Human Form ◽  
Modeling Systems ◽  
Exploratory Approach ◽  
Disability Status ◽  
High Level ◽  
The Impact

This paper describes the process of developing a software tool for digital artistic exploration of 3D human figures. Previously available software for modeling mesh-based 3D human figures restricts user output based on normative assumptions about the form that a body might take, particularly in terms of gender, race, and disability status, which are reinforced by ubiquitous use of range-limited sliders mapped to singular high-level design parameters. CreatorCustom, the software prototype created during this research, is designed to foreground an exploratory approach to modeling 3D human bodies, treating the digital body as a sculptural landscape rather than a presupposed form for rote technical representation. Building on prior research into serendipity in Human-Computer Interaction and 3D modeling systems for users at various levels of proficiency, among other areas, this research comprises two qualitative studies and investigation of the impact on the first author's artistic practice. Study 1 uses interviews and practice sessions to explore the practices of six queer artists working with the body and the language, materials, and actions they use in their practice; these then informed the design of the software tool. Study 2 investigates the usability, creativity support, and bodily implications of the software when used by thirteen artists in a workshop. These studies reveal the importance of exploration and unexpectedness in artistic practice, and a desire for experimental digital approaches to the human form.

scholarly journals Simulation Tests of a Cow Milking Machine—Analysis of Design Parameters

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1358
Author(s):  
Ewa Golisz ◽  
Adam Kupczyk ◽  
Maria Majkowska ◽  
Jędrzej Trajer
Keyword(s):  
Mathematical Model ◽  
Simplified Model ◽  
Design Parameters ◽  
Degree Polynomial ◽  
Fourth Degree ◽  
Local Loss ◽  
Linear Drag ◽  
Milking Machine ◽  
Machine Analysis ◽  
The Impact

The objective of this paper was to create a mathematical model of vacuum drops in a form that enables the testing of the impact of design parameters of a milking cluster on the values of vacuum drops in the claw. Simulation tests of the milking cluster were conducted, with the use of a simplified model of vacuum drops in the form of a fourth-degree polynomial. Sensitivity analysis and a simulation of a model with a simplified structure of vacuum drops in the claw were carried out. As a result, the impact of the milking machine’s design parameters on the milking process could be analysed. The results showed that a change in the local loss and linear drag coefficient in the long milk duct will have a lower impact on vacuum drops if a smaller flux of inlet air, a higher head of the air/liquid mix, and a higher diameter of the long milk tube are used.

scholarly journals A New Approach for Design Optimization and Parametric Analysis of Symmetric Compound Parabolic Concentrator for Photovoltaic Applications

2021 ◽  
Vol 13 (9) ◽  
pp. 4606
Author(s):  
Faisal Masood ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Javed Akhter ◽  
Mohammad Azad Alam
Keyword(s):  
Parametric Analysis ◽  
Concentration Ratio ◽  
Synergistic Effects ◽  
Geometric Optimization ◽  
Design Parameters ◽  
Imaging Device ◽  
Compound Parabolic Concentrator ◽  
Photovoltaic Applications ◽  
Half Angle ◽  
The Impact

A compound parabolic concentrator (CPC) is a non-imaging device generally used in PV, thermal, or PV/thermal hybrid systems for the concentration of solar radiation on the target surface. This paper presents the geometric design, statistical modeling, parametric analysis, and geometric optimization of a two-dimensional low concentration symmetric compound parabolic concentrator for potential use in building-integrated and rooftop photovoltaic applications. The CPC was initially designed for a concentration ratio of “2×” and an acceptance half-angle of 30°. A MATLAB code was developed in house to provoke the CPC reflector’s profile. The height, aperture width, and concentration ratios were computed for different acceptance half-angles and receiver widths. The interdependence of optical concentration ratio and acceptance half-angle was demonstrated for a wide span of acceptance half-angles. The impact of the truncation ratio on the geometric parameters was investigated to identify the optimum truncation position. The profile of truncated CPC for different truncation positions was compared with full CPC. A detailed statistical analysis was performed to analyze the synergistic effects of independent design parameters on the responses using the response surface modeling approach. A set of optimized design parameters was obtained by establishing specified optimization criteria. A 50% truncated CPC with an acceptance half-angle of 21.58° and receiver width of 193.98 mm resulted in optimum geometric dimensions.

scholarly journals Impact of Cross-Tie Properties on the Modal Behavior of Cable Networks on Cable-Stayed Bridges

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Javaid Ahmad ◽  
Shaohong Cheng ◽  
Faouzi Ghrib
Keyword(s):  
Analytical Model ◽  
Design Parameters ◽  
Reference Base ◽  
Cable Network ◽  
Cable Networks ◽  
Modal Behavior ◽  
Stiffness And Damping ◽  
Main Cables ◽  
The Impact ◽  
Selection Of

Dynamic behaviour of cable networks is highly dependent on the installation location, stiffness, and damping of cross-ties. Thus, these are the important design parameters for a cable network. While the effects of the former two on the network response have been investigated to some extent in the past, the impact of cross-tie damping has rarely been addressed. To comprehend our knowledge of mechanics associated with cable networks, in the current study, an analytical model of a cable network will be proposed by taking into account both cross-tie stiffness and damping. In addition, the damping property of main cables in the network will also be considered in the formulation. This would allow exploring not only the effectiveness of a cross-tie design on enhancing the in-plane stiffness of a constituted cable network, but also its energy dissipation capacity. The proposed analytical model will be applied to networks with different configurations. The influence of cross-tie stiffness and damping on the modal response of various types of networks will be investigated by using the corresponding undamped rigid cross-tie network as a reference base. Results will provide valuable information on the selection of cross-tie properties to achieve more effective cable vibration control.

Performance Modeling of Desiccant Wheels: 1 — Model Development

2008 ◽  
Author(s):  
Chaoqin Zhai ◽  
David H. Archer ◽  
John C. Fischer
Keyword(s):  
Model Development ◽  
Axial Direction ◽  
Performance Model ◽  
Design Parameters ◽  
Residual Water ◽  
One Dimensional ◽  
Operating Variables ◽  
Steady State Operation ◽  
Rotary Speed ◽  
The Impact

This paper presents the development of an equation based model to simulate the combined heat and mass transfer in the desiccant wheels. The performance model is one dimensional in the axial direction. It applies a lumped formulation in the thickness direction of the desiccant and the substrate. The boundary conditions of this problem represent the inlet outside/process and building exhaust/regeneration air conditions as well as the adiabatic condition of the two ends of the desiccant composite. The solutions of this model are iterated until the wheel reaches periodic steady state operation. The modeling results are obtained as the changes of the outside/process and building exhaust/regeneration air conditions along the wheel depth and the wheel rotation. This performance model relates the wheel’s design parameters, such as the wheel dimension, the channel size and the desiccant properties, and the wheel’s operating variables, such as the rotary speed and the regeneration air flowrate, to its operating performance. The impact of some practical issues, such as wheel purge, residual water in the desiccant and the wheel supporting structure, on the wheel performance has also been investigated.

Analytic Optimization of Cost Effective Thermoelectric Generation on Top of Rankine Cycle

2013 ◽  
Author(s):  
Kazuaki Yazawa ◽  
Yee Rui Koh ◽  
Ali Shakouri
Keyword(s):  
Steam Turbine ◽  
Fuel Efficiency ◽  
Cost Effective ◽  
Rankine Cycle ◽  
Energy Conversion Efficiency ◽  
Design Parameters ◽  
Steam Temperature ◽  
Combined System ◽  
Fuel Consumption Rate ◽  
The Impact

Thermoelectric (TE) generators have a potential advantage of the wide applicable temperature range by a proper selection of materials. In contrast, a steam turbine (ST) as a Rankine cycle thermodynamic generator is limited up to more or less 630 °C for the heat source. Unlike typical waste energy recovery systems, we propose a combined system placing a TE generator on top of a ST Rankine cycle generator. This system produces an additional power from the same energy source comparing to a stand-alone steam turbine system. Fuel efficiency is essential both for the economic efficiency and the ecological friendliness, especially for the global warming concern on the carbon dioxide (CO2) emission. We report our study of the overall performance of the combined system with primarily focusing on the design parameters of thermoelectric generators. The steam temperature connecting two individual generators gives a trade-off in the system design. Too much lower the temperature reduces the ST performance and too much higher the temperature reduces the temperature difference across the TE generator hence reduces the TE performance. Based on the analytic modeling, the optimum steam temperature to be designed is found near at the maximum power design of TE generator. This optimum point changes depending on the hours-of-operation. It is because the energy conversion efficiency directly connects to the fuel consumption rate. As the result, physical upper-limit temperature of steam for ST appeared to provide the best fuel economy. We also investigated the impact of improving the figure-of-merit (ZT) of TE materials. As like generic TE engines, reduction of thermal conductivity is the most influential parameter for improvement. We also discuss the cost-performance. The combined system provides the payback per power output at the initial and also provides the significantly better energy economy [$/KWh].

Impact of Operating Conditions and Design Parameters on Gas Turbine Hot Section Creep Life

2010 ◽  
Author(s):  
S. Eshati ◽  
M. F. Abdul Ghafir ◽  
P. Laskaridis ◽  
Y. G. Li
Keyword(s):  
Gas Turbines ◽  
Performance Model ◽  
Operating Conditions ◽  
Creep Model ◽  
Design Parameters ◽  
Gas Temperature ◽  
Creep Life ◽  
Cooling Effectiveness ◽  
Radial Temperature ◽  
The Impact

This paper investigates the relationship between design parameters and creep life consumption of stationary gas turbines using a physics based life model. A representative thermodynamic performance model is used to simulate engine performance. The output from the performance model is used as an input to the physics based model. The model consists of blade sizing model which sizes the HPT blade using the constant nozzle method, mechanical stress model which performs the stress analysis, thermal model which performs thermal analysis by considering the radial distribution of gas temperature, and creep model which using the Larson-miller parameter to calculate the lowest blade creep life. The effect of different parameters including radial temperature distortion factor (RTDF), material properties, cooling effectiveness and turbine entry temperatures (TET) is investigated. The results show that different design parameter combined with a change in operating conditions can significantly affect the creep life of the HPT blade and the location along the span of the blade where the failure could occur. Using lower RTDF the lowest creep life is located at the lower section of the span, whereas at higher RTDF the lowest creep life is located at the upper side of the span. It also shows that at different cooling effectiveness and TET for both materials the lowest blade creep life is located between the mid and the tip of the span. The physics based model was found to be simple and useful tool to investigate the impact of the above parameters on creep life.

Sign in / Sign up

Export Citation Format

Share Document