scholarly journals Characterization of a novel, low-cost, scalable vaporized hydrogen peroxide system for sterilization of N95 respirators and other COVID-19 related personal protective equipment

2020 ◽  
Author(s):  
Nikhil Dave ◽  
Katie Sue Pascavis ◽  
John Patterson ◽  
David Wallace ◽  
Abhik Chowdhury ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Low Cost ◽  
Cost Effective ◽  
Medical Personnel ◽  
Alternative Methods ◽  
Community Members ◽  
Fluid Resistance ◽  
Wide Range ◽  
The Cost ◽  
N95 Respirators

AbstractDue to the virulence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the pathogen responsible for the respiratory disease termed COVID-19, there has been a significant increase in demand for surgical masks and N95 respirators in medical clinics as well as within communities operating during the COVID-19 epidemic. Thus, community members, business owners, and even medical personnel have resorted to alternative methods for sterilizing face coverings and N95 respirators for reuse. While significant work has shown that vaporized hydrogen peroxide (VHP) can be used to sterilize N95 respirators, the cost and installation time for these sterilization systems limit their accessibility. To this end, we have designed and constructed a novel, cost-effective, and scalable VHP system that can be used to sterilize N95 respirators and other face coverings for clinical and community applications. N95 respirators inoculated with P22 bacteriophage showed a greater than 6-log10 reduction in viral load when sterilized in the VHP system for one 60-minute cycle. Further, N95 respirators treated with 20 cycles in this VHP system showed comparable filtration efficiency to untreated N95 respirators in a 50 to 200 nanometer particulate challenge filtration test. While a 23% average increase in water droplet roll-off time was observed for N95 respirators treated with 5 cycles in the sterilization, no breakdown in fluid resistance was detected. These data suggest that our VHP system is effective in sterilizing N95 respirators and other polypropylene masks for reuse. Relating to the present epidemic, deployment of this system reduces the risk of COVID-19 community transmission while conserving monetary resources otherwise spent on the continuous purchase of disposable N95 respirators and other face coverings. In summary, this novel, scientifically validated sterilization system can be easily built at a low cost and implemented in a wide range of settings.

scholarly journals Characterization of a novel, low-cost, scalable ozone gas system for sterilization of N95 respirators and other COVID-19 related use cases.

2020 ◽  
Author(s):  
Nikhil Dave ◽  
Katie Sue Pascavis ◽  
John Patterson ◽  
Michael Kozicki ◽  
David Wallace ◽  
...  
Keyword(s):  
Low Cost ◽  
Total Concentration ◽  
Cost Effective ◽  
Use Cases ◽  
Environmental Benefits ◽  
Complete Inactivation ◽  
Fluid Resistance ◽  
Viral Particles ◽  
Community Transmission ◽  
N95 Respirators

AbstractSevere acute respiratory syndrome coronavirus 2 (SARS-CoV-2), an elusive and highly pathogenic agent, has resulted in the ongoing COVID-19 pandemic affecting numerous populations worldwide. New studies investigating the tenacity of SARS-CoV-2 have highlighted its ability to persist on a myriad of surfaces for several days, including gowns and shoes. As a result, there is a global need for sterilization of a variety of potentially-contaminated items, ranging from clothing to personal protective equipment like face coverings. To this end, we have designed and constructed a cost-effective, scalable, and sustainable sterilization system that uses ozone gas to inactivate viral particles. We sought to determine the efficacy of the system in the sterilization of viral particles as well as its ability to sterilize N95 respirators for reuse. N95 respirators inoculated with P22 bacteriophage and sterilized in the ozone system showed a 6-log10 reduction in viral load when treated at 25 ppm for 150 minutes. Further, N95 respirators treated with five 150-minute cycles at 35 ppm for a total concentration-time product (CT) of 26,250 ppm min in the ozone system showed comparable filtration efficiency to untreated N95 respirators in a 50 to 200 nmr particulate challenge filtration test. Interestingly, the surgical N95 respirators tested showed complete inactivation of fluid resistance and degradation of the elasticity of polyisoprene straps after five cycles in the sterilization system. Taken together, these data suggest that while our ozone system may negatively affect certain protective aspects of surgical N95 respirators, it does effectively sterilize viral particles and can be utilized for a multitude of other use cases, including sterilizing polypropylene face coverings after potential SARS-CoV-2 contamination. In addition to providing long-term environmental benefits, deployment of this system during the ongoing pandemic reduces the risk of COVID-19 community transmission while conserving monetary resources otherwise spent on the continuous purchase of disposable face coverings.

Light Rail Lite or Cost-Effective Improvements to Bus Service?

2005 ◽  
Vol 1927 (1) ◽  
pp. 22-30 ◽  
Author(s):  
Daniel B. Hess ◽  
Brian D. Taylor ◽  
Allison C. Yoh
Keyword(s):  
High Speed ◽  
Low Cost ◽  
Effective Means ◽  
Cost Effective ◽  
Light Rail ◽  
Rapid Transit ◽  
Service Characteristics ◽  
Wide Range ◽  
Bus Service ◽  
The Cost

Bus rapid transit (BRT) is growing rapidly in popularity because it is viewed widely as an efficient and effective means to improve both transit service and patronage. This paper argues that two distinct views of BRT are emerging: ( a) BRT as a new form of high-speed, rubber-tired, rail-like rapid transit and ( b) BRT as a cost-effective way to upgrade both the quality and image of traditional fixed-route bus service. These two views carry different price tags because the cost of planning, constructing, and operating BRT depends on the complexity of new service features and on rises for BRT that offer service characteristics approaching those of light rail. This study fills a gap in the literature on the costs of BRT by examining in detail component costs–-actual costs for recently implemented services and projected costs for planned new services–-for a sample of BRT systems in North American cities. The study examined BRT costs of 14 planned and recently opened BRT systems to determine how the wide range of BRT service and technology configurations affect costs. The study found that although some of the most successful and popular new BRT systems are high-quality services operating in mixed traffic and implemented at relatively low cost, most BRT projects on the drawing boards are more elaborate, more expensive systems than many currently in service. Most new BRT projects emphasize elaborate LRT-type improvements to lines and stations in one or a few corridors rather than less splashy improvements (such as next-bus monitors, signal preemption, queue-jump lanes, and so forth) affecting more lines and modes in local transit networks. Among the 14 systems examined here, most could be characterized as light rail lite.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

scholarly journals Growth and biochemical composition of Chlorella vulgaris in different growth media

2013 ◽  
Vol 85 (4) ◽  
pp. 1427-1438 ◽  
Author(s):  
MATHIAS A. CHIA ◽  
ANA T. LOMBARDI ◽  
MARIA DA GRACA G. MELAO
Keyword(s):  
Biomass Production ◽  
Chlorella Vulgaris ◽  
Biochemical Composition ◽  
Physiological Response ◽  
Low Cost ◽  
Cost Effective ◽  
Growth Conditions ◽  
Growth Media ◽  
Continuous Cultures ◽  
The Cost

The need for clean and low-cost algae production demands for investigations on algal physiological response under different growth conditions. In this research, we investigated the growth, biomass production and biochemical composition of Chlorella vulgaris using semi-continuous cultures employing three growth media (LC Oligo, Chu 10 and WC media). The highest cell density was obtained in LC Oligo, while the lowest in Chu medium. Chlorophyll a, carbohydrate and protein concentrations and yield were highest in Chu and LC Oligo media. Lipid class analysis showed that hydrocarbons (HC), sterol esthers (SE), free fatty acids (FFA), aliphatic alcohols (ALC), acetone mobile polar lipids (AMPL) and phospholipids (PL) concentrations and yields were highest in the Chu medium. Triglyceride (TAG) and sterol (ST) concentrations were highest in the LC Oligo medium. The results suggested that for cost effective cultivation, LC Oligo medium is the best choice among those studied, as it saved the cost of buying vitamins and EDTA associated with the other growth media, while at the same time resulted in the best growth performance and biomass production.

scholarly journals A Novel Adaptive Pixels Segmentation Algorithm for Pavement Crack Detection

2021 ◽  
Author(s):  
Nima Safaei ◽  
Omar Smadi ◽  
Babak Safaei ◽  
Arezoo Masoud
Keyword(s):  
Crack Detection ◽  
Low Cost ◽  
Local Level ◽  
Cost Effective ◽  
Segmentation Algorithm ◽  
Pavement Maintenance ◽  
Detection Systems ◽  
Wide Range ◽  
Cost Efficient ◽  
Pavement Crack Detection

<p>Cracks considerably reduce the life span of pavement surfaces. Currently, there is a need for the development of robust automated distress evaluation systems that comprise a low-cost crack detection method for performing fast and cost-effective roadway health monitoring practices. Most of the current methods are costly and have labor-intensive learning processes, so they are not suitable for small local-level projects with limited resources or are only usable for specific pavement types.</p> <p>This paper proposes a new method that uses an improved version of the weighted neighborhood pixels segmentation algorithm to detect cracks in 2-D pavement images. This method uses the Gaussian cumulative density function as the adaptive threshold to overcome the drawback of fixed thresholds in noisy environments. The proposed algorithm was tested on 300 images containing a wide range of noise representative of different noise conditions. This method proved to be time and cost-efficient as it took less than 3.15 seconds per 320 × 480 pixels image for a Xeon (R) 3.70 GHz CPU processor to determine the detection results. This makes the model a perfect choice for county-level pavement maintenance projects requiring cost-effective pavement crack detection systems. The validation results were promising for the detection of low to severe-level cracks (Accuracy = 97.3%, Precision = 79.21%, Recall= 89.18% and F<sub>1</sub> score = 83.9%).</p>

scholarly journals Protection of computers from side electromagnetic radiation during monitor images formation

2021 ◽  
Vol 4 (4) ◽  
pp. 377-385
Author(s):  
Volodymyr M. Lucenko ◽  
Dmytro O. Progonov
Keyword(s):  
Electromagnetic Radiation ◽  
Ad Hoc ◽  
Low Cost ◽  
Cost Effective ◽  
Switching Speed ◽  
Cost Effective Approach ◽  
Alternative Approach ◽  
Confidential Data ◽  
The Cost ◽  
Communication Lines

Reliable protection of confidential data processed in critical information infrastructure elements of public institutions and private organizations is topical task today. Of particular interest are methods to prevent the leakage of confidential data by localizing informative (dangerous) signals that both carry an informative component, and have a signal level higher than predefined threshold. The increase in signal energy from personal computers is caused by increasing of its transistors switching speed. Modern passive shielding methods for secured computers, similar to the well-known program TEMPEST, require either costly and large shielding units or technological simplification by using of low-cost fragmentary shielding of computer’s individual elements. Therefore, localization of side electromagnetic radiation produced by personal computer is needed. The paper presents a cost-effective approach to reducing the level of computer’s electromagnetic radiation by passive method. The radiation are localized and measured by its estimation on personal computer’s elements, namely unshielded communication lines between video processor and a monitor, fragments of electric tracks on motherboards, etc. During experiments authors used ad-hoc miniature electric (ball antenna) and magnetic (Hall sensor) antennas connected to selective voltmeters. This approach significantly reduces the cost of equipment and measurements as well as requirements to analytics’ qualification for improving computer’s protection. Also, the alternative approach for computer protection is proposed. The approach is based on image content protection by distorting the image on the monitor instead of reducing electromagnetic radiation caused by signals from the monitor. The protection includes image scrambling using Arnold transform that randomly “shuffle” the lines in each frame.

An Active Low Cost Mesh Networking Indoor Tracking System

2014 ◽  
Vol 6 (1) ◽  
pp. 45-79 ◽  
Author(s):  
Sean Carlin ◽  
Kevin Curran
Keyword(s):  
Tracking System ◽  
Low Cost ◽  
Cost Effective ◽  
Limiting Factors ◽  
Unique Contribution ◽  
Scalable Vector Graphics ◽  
Web Technologies ◽  
Working Environments ◽  
System A ◽  
The Cost

Indoor radio frequency tracking systems are generally quite expensive and can vary in accuracy due to interference, equipment quality or other environmental factors. Due to these limiting factors of the technology, many businesses today find it hard to justify investing in RFID tracking technologies to improve the safety, efficiency and security of their working environments. The aim of this project was to provide a budget RFID tracking system that was capable of tracking a person or object through an indoor environment. To minimize the cost of the RFID tracking system, the components of the system were built from existing electronic equipment and hardware. The software was also written to minimize licensing and support fees allowing a cost effective budget RFID tracking system to be developed. The tracking system consists of a tag, reader nodes and a PC reader which utilize synapse RF 100 engines with python scripts embedded on to the chips. The tracking system software operates through a web portal utilizing web technologies such as HTML, JavaScript and PHP to allow the tags location to be represented on a two dimensional map using scalable vector graphics. During development of the system a new trilateration algorithm was developed and used convert the signals received from the tag to a virtual position on the map correlating to the actual physical position of the tag. A unique contribution of this system is the low cost of building which we estimate as less than £200 UK sterling for a five node system.

scholarly journals Self-managed, computerised word finding therapy as an add-on to usual care for chronic aphasia post-stroke: An economic evaluation

2020 ◽  
pp. 026921552097534
Author(s):  
Nicholas R Latimer ◽  
Arjun Bhadhuri ◽  
Abu O Alshreef ◽  
Rebecca Palmer ◽  
Elizabeth Cross ◽  
...  
Keyword(s):  
Cost Effectiveness ◽  
Usual Care ◽  
Low Cost ◽  
Controlled Trial ◽  
Life Time ◽  
Cost Effective ◽  
Quality Adjusted Life Year ◽  
Post Stroke ◽  
Word Finding ◽  
The Cost

Objective: To examine the cost-effectiveness of self-managed computerised word finding therapy as an add-on to usual care for people with aphasia post-stroke. Design: Cost-effectiveness modelling over a life-time period, taking a UK National Health Service (NHS) and personal social service perspective. Setting: Based on the Big CACTUS randomised controlled trial, conducted in 21 UK NHS speech and language therapy departments. Participants: Big CACTUS included 278 people with long-standing aphasia post-stroke. Interventions: Computerised word finding therapy plus usual care; usual care alone; usual care plus attention control. Main measures: Incremental cost-effectiveness ratios (ICER) were calculated, comparing the cost per quality adjusted life year (QALY) gained for each intervention. Credible intervals (CrI) for costs and QALYs, and probabilities of cost-effectiveness, were obtained using probabilistic sensitivity analysis. Subgroup and scenario analyses investigated cost-effectiveness in different subsets of the population, and the sensitivity of results to key model inputs. Results: Adding computerised word finding therapy to usual care had an ICER of £42,686 per QALY gained compared with usual care alone (incremental QALY gain: 0.02 per patient (95% CrI: −0.05 to 0.10); incremental costs: £732.73 per patient (95% CrI: £674.23 to £798.05)). ICERs for subgroups with mild or moderate word finding difficulties were £22,371 and £21,262 per QALY gained respectively. Conclusion: Computerised word finding therapy represents a low cost add-on to usual care, but QALY gains and estimates of cost-effectiveness are uncertain. Computerised therapy is more likely to be cost-effective for people with mild or moderate, as opposed to severe, word finding difficulties.

Development of Calibration Equipment for Geodetic Angle Measurement Instruments

2015 ◽  
Vol 220-221 ◽  
pp. 396-400
Author(s):  
Lauryna Šiaudinytė ◽  
Deividas Sabaitis ◽  
Domantas Bručas ◽  
Gintaras Dmitrijev
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Angle Measurement ◽  
Measurement Instruments ◽  
Measurement Systems ◽  
Complex Processes ◽  
Cost Effective Alternative ◽  
Reducing Costs ◽  
The Cost

Production of high precision circular scales is a complicated process requiring expensive equipment and complex processes to achieve. Precision angle measurement equipment tends to be very expensive and therefore not accessible to all in need. Simplification of production of such devices can lead to reducing costs of angle measurement systems ensuring easier accessibility. A new method of producing precision circular scales using low cost mass production can reduce the costs of these devices drastically. Therefore, utilising a common CD technology as the basis for such scales is analysed. This paper deals with the analysis of the newest laser cutting method for plastic circular scales. Preliminary results of manufacturing such scales are presented in the paper as well as measurements of the grating of the scale were performed. The quality of different scales manufactured using different laser types is analysed in the study. The cost – effective alternative of manufacturing circular scales is discussed in the paper.

LZER0: GNSS cost-effective real-time positioning applied to landslide monitoring

2020 ◽  
Author(s):  
Lavinia Tunini ◽  
David Zuliani ◽  
Paolo Fabris ◽  
Marco Severin
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Low Cost ◽  
Cost Effective ◽  
Single Frequency ◽  
Landslide Monitoring ◽  
Natural Risk ◽  
Near Surface ◽  
Landslide Event ◽  
Wide Range

&lt;p&gt;The Global Navigation Satellite Systems (GNSS) provide a globally extended dataset of primordial importance for a wide range of applications, such as crustal deformation, topographic measurements, or near surface processes studies. However, the high costs of GNSS receivers and the supporting software can represent a strong limitation for the applicability to landslide monitoring. Low-cost tools and techniques are strongly required to face the plausible risk of losing the equipment during a landslide event.&lt;/p&gt;&lt;p&gt;Centro di Ricerche Sismologiche (CRS) of Istituto Nazionale di Oceanografia e di Geofisica Sperimentale OGS in collaboration with SoluTOP, in the last years, has developed a cost-effective GNSS device, called LZER0, both for post-processing and real-time applications. The aim is to satisfy the needs of both scientific and professional communities which require low-cost equipment to increase and improve the measurements on structures at risk, such as landslides or buildings, without losing precision.&lt;/p&gt;&lt;p&gt;The landslide monitoring system implements single-frequency GNSS devices and open source software packages for GNSS positioning, dialoguing through Linux shell scripts. Furthermore a front-end web page has been developed to show real-time tracks. The system allows measuring real-time surface displacements with a centimetre precision and with a cost ten times minor than a standard RTK GPS operational system.&lt;/p&gt;&lt;p&gt;This monitoring system has been tested and now applied to two landslides in NE- Italy: one near Tolmezzo municipality and one near Brugnera village. Part of the device development has been included inside the project CLARA 'CLoud plAtform and smart underground imaging for natural Risk Assessment' funded by the Italian Ministry of Education, University and Research (MIUR).&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document