scholarly journals In vitro study of dentin hypersensitivity treated by whitlockite glass-ceramics

2017 ◽  
Author(s):  
Amanda C. Juraski
Keyword(s):  
Bioactive Glass ◽  
Artificial Saliva ◽  
Third Molar ◽  
Glass Ceramics ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Dentin Hypersensitivity ◽  
Human Teeth

AbstractThe aim of this study is to evaluate the potential of a bioactive glass based on the 3CaO.P2O5-SiO2MgO-system and its glassceramics containing whitlockite on the remineralization of dentin as a possible treatment to dentin hypersensitivity. For that, 40 third molar human teeth were artificially demineralized and randomly distributed in 4 groups (n = 10): G1 - Negative Control (no treatment), G2 - Positive Control (treated by Bioglass® 45S5), G3 – BG (treated by bioactive glass based on 3CaO.P2O5-SiO2-MgOsystem), and G4 – BGC (treated by bioactive whitlockite glass-ceramics). After treatment, the samples were emerged in artificial saliva and stored for 7 days in a controlled temperature of 37ºC. After that, scanning electron microscopy (SEM) and atomic force microscopy (AFM) was used to evaluate samples morphology. The analysis confirmed the formation of hydroxyapatite on the surface of all the biomaterials studied, that in the dentine specimens treated by bioactive glass and whitlockite glas-ceramic most of the dentinal tubules were completely occluded.

scholarly journals Effects of Additional Use of Bioactive Glasses or a Hydroxyapatite Toothpaste on Remineralization of Artificial Lesions in vitro

2020 ◽  
Vol 54 (4) ◽  
pp. 336-342
Author(s):  
Philipp Körner ◽  
Jana A Schleich ◽  
Daniel B. Wiedemeier ◽  
Thomas Attin ◽  
Florian J. Wegehaupt
Keyword(s):  
Bioactive Glass ◽  
Artificial Saliva ◽  
Test Group ◽  
In Vitro Study ◽  
Negative Control Group ◽  
Negative Control ◽  
Control Group ◽  
Bioactive Glasses ◽  
Initial Caries

<b><i>Objectives:</i></b> This in vitro study aimed to evaluate and compare the effect of two different bioactive glasses, a hydroxyapatite-containing, fluoride-free toothpaste (HTP) and a fluoride toothpaste (FTP) on the remineralization behavior of initial caries lesions. <b><i>Materials and Methods:</i></b> A total of 100 bovine enamel samples were randomly allocated to five groups of 20 samples each: NC = negative control group (artificial saliva); HTP = HTP group (Karex); FTP = FTP group (Elmex caries protection, 1,400 ppm); FTP + BG<sub>nano</sub> = FTP followed by Actimins bioactive glass; FTP + BG<sub>amorph</sub> = FTP followed by Schott bioactive glass. Radiographic documentation (advanced transversal microradiography; aTMR) was applied before and after all samples were exposed to a demineralizing gel for 10 days. Over a period of 28 days, samples were covered twice a day (every 12 h) with a toothpaste slurry of the respective test group or with artificial saliva in NC for 60 s and brushed with 15 brushing strokes. Samples in FTP + BG<sub>nano</sub> and FTP + BG<sub>amorph</sub> were additionally treated with the respective bioactive glass slurry for 30 s after brushing with the FTP. In the meantime, all samples were stored in artificial saliva. After 28 days, the structure of all samples was assessed again using aTMR and compared to the values measured after demineralization. The statistical evaluation of the integrated mineral loss was performed using Kruskal-Wallis test followed by a post hoc Conover test. <b><i>Results:</i></b> The FTP revealed the significantly highest increase of mineral content while the HTP showed the significantly lowest remineralization. Compared to artificial saliva, the use of the HTP or the combined application of FTP followed by bioactive glasses (FTP + BG<sub>nano</sub> and FTP + BG<sub>amorph</sub>) showed no significant remineralization. <b><i>Conclusion:</i></b> Under remineralizing in vitro conditions, brushing with 1,400 ppm FTP induced significantly more remineralization compared to storage in artificial saliva. The additional administration of both bioactive glasses as well as the substitutional brushing with an HTP resulted in significantly less remineralization compared to brushing with 1,400 ppm FTP.

scholarly journals Evaluation of ionic degradation and slot corrosion of metallic brackets by the action of different dentifrices

2013 ◽  
Vol 18 (1) ◽  
pp. 86-93
Author(s):  
Gustavo Antônio Martins Brandão ◽  
Rafael Menezes Simas ◽  
Leandro Moreira de Almeida ◽  
Juliana Melo da Silva ◽  
Marcelo de Castro Meneghim ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Artificial Saliva ◽  
Positive Control ◽  
Negative Control ◽  
Sem Analysis ◽  
Wilcoxon Test ◽  
Surface Polishing ◽  
Aluminium Ion ◽  
Negative Controls

OBJECTIVE: To evaluate the in vitro ionic degradation and slot base corrosion of metallic brackets subjected to brushing with dentifrices, through analysis of chemical composition by Energy Dispersive Spectroscopy (EDS) and qualitative analysis by Scanning Electron Microscopy (SEM). METHODS: Thirty eight brackets were selected and randomly divided into four experimental groups (n = 7). Two groups (n = 5) worked as positive and negative controls. Simulated orthodontic braces were assembled using 0.019 x 0.025-in stainless steel wires and elastomeric rings. The groups were divided according to surface treatment: G1 (Máxima Proteção Anticáries®); G2 (Total 12®); G3 (Sensitive®); G4 (Branqueador®); Positive control (artificial saliva) and Negative control (no treatment). Twenty eight brushing cycles were performed and evaluations were made before (T0) and after (T1) experiment. RESULTS: The Wilcoxon test showed no difference in ionic concentrations of titanium (Ti), chromium (Cr), iron (Fe) and nickel (Ni) between groups. G2 presented significant reduction (p < 0.05) in the concentration of aluminium ion (Al). Groups G3 and G4 presented significant increase (p < 0.05) in the concentration of aluminium ion. The SEM analysis showed increased characteristics indicative of corrosion on groups G2, G3 and G4. CONCLUSION: The EDS analysis revealed that control groups and G1 did not suffer alterations on the chemical composition. G2 presented degradation in the amount of Al ion. G3 and G4 suffered increase in the concentration of Al. The immersion in artificial saliva and the dentifrice Máxima Proteção Anticáries® did not alter the surface polishing. The dentifrices Total 12®, Sensitive® and Branqueador® altered the surface polishing.

scholarly journals Evaluation of coconut water neutralized by different agents on the viability of human fibroblasts: an in vitro study

2016 ◽  
Vol 45 (4) ◽  
pp. 234-239 ◽  
Author(s):  
Priscilla Barbosa Ferreira SOARES ◽  
Aletheia Moraes ROCHA ◽  
Manuella Verdinelli de Paula REIS ◽  
Camilla Christian Gomes MOURA ◽  
Carlos José SOARES
Keyword(s):  
Cell Viability ◽  
Tap Water ◽  
Human Fibroblasts ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Coconut Water ◽  
Ph Adjustment ◽  
Adjustment Method

Abstract Objective This study evaluated four types of pH adjustment of the coconut water (CW) on viability of human fibroblasts (HFF). Material and method Natural and industrialized CW were adjusted to pH 7.0 using: (1) Sodium Hidroxide (NaOH), (2) Sodium bicarbonate (NaHCO3), (3) Triethanolamine (C6H15NO3), (4) 2-Amino-2-Methil-1-Propanol (C4H11NO). Fibroblasts were plated at 2×104/ well in 96 well plates and maintained in the CW solutions for 2 h and 4 h. Positive control was represented by HFF maintained in DMEM and the negative control by tap water. Cell viability was analyzed by MTT formazan method. Data were analyzed by 3-way ANOVA followed by Tukey’s and Dunnet’s test. Result There are no significant effect on the cell viability regarding type of CW, period of evaluation, and the interactions between CW and period of evaluation, CW and pH adjustment method, pH adjustment method and period of evaluation (p>0.05). Conclusion The product used for CW pH adjustment did not influenced HFF viability, thought there are a tendency of better performance in natural CW.

scholarly journals Comparative SEM evaluation of penetration of adhesive systems in human dentin with a non-rinse conditioner and a self-etching primer

2004 ◽  
Vol 15 (1) ◽  
pp. 19-25 ◽  
Author(s):  
Julio Orrico de Aragão Pedra e Cal-Neto ◽  
Mauro Sayão de Miranda ◽  
Katia Regina Hostílio Cervantes Dias
Keyword(s):  
Penetration Depth ◽  
Third Molar ◽  
Adhesive System ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Human Tooth ◽  
Control Group ◽  
Human Teeth ◽  
Homogeneous Groups

The purpose of this study was to compare the effect of a self-etching primer and a non-rinse conditioner with the effect of a conventional adhesive system on the penetration depth in dentin of human teeth, using scanning electronic microscopy (SEM). Fifteen human third molar teeth were sectioned into 2 pieces. All pieces were flattened with grade 600 to 1200 silicon carbide paper and divided into 6 groups: group 1 - Prime & Bond NT (NT), negative control; group 2 - 37% phosphoric acid + Prime & Bond NT (PANT), positive control; group 3 - Non-rinse Conditioner (NRC) + Prime & Bond NT (NRCNT); group 4 - NRC + Prime & Bond 2.1 (NRCPB); group 5 - NRC + Scotchbond MP (NRCSB); group 6 - Prompt L-Pop (PLP). All teeth were covered with Dyract AP. The tooth fragments were decalcified, and its resin replicas were evaluated by SEM by three previously standardized examiners. The penetration was scored from 0 (no penetration) to 3 (maximum penetration). The Kruskal-Wallis and Mann-Whitney U tests (p<0.05) showed three statistically homogeneous groups: {NT, NRCPB, NRCSB and PLP}, {NRCNT} and {PANT}. The authors concluded that the self-etching primer and the non-rinse conditioner provide a lower penetration depth in human tooth dentin than the conventional adhesive system.

Evaluating Dentin Surface Treatments for Resin-Modified Glass Ionomer Restorative Materials

2013 ◽  
Vol 38 (4) ◽  
pp. 429-438 ◽  
Author(s):  
TA Imbery ◽  
A Namboodiri ◽  
A Duncan ◽  
R Amos ◽  
AM Best ◽  
...  
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Surface Treatments ◽  
Band Matrices ◽  
Dentin Surface ◽  
Occlusal Surfaces ◽  
Significant Difference

SUMMARY This in vitro study evaluated the effect of six surface treatments on the shear bond strength of three resin-modified glass ionomers (RMGIs) to dentin. Occlusal surfaces of caries-free third molars were reduced to expose only dentin. Surface treatments were smear layer intact (negative control), Cavity Conditioner, EDTA, Ketac Primer, Self Conditioner, and etching with 35% phosphoric acid followed by the application of Optibond Solo Plus. Filtek Z250 composite resin bonded with Optibond Solo Plus served as a positive control. Conditioning agents were used according to the manufacturers' instructions. After surface treatments, Fuji II LC, Riva LC, Ketac Nano, and Filtek Z250 were placed in copper-band matrices 5 mm in diameter and 2 mm in height and were light-cured for 20 seconds. Specimens were stored in 100% humidity for 24 hours, after which they were placed in deionized water for 24 hours at 37°C. They were then tested under shear forces in an Instron Universal Testing Machine at a crosshead speed of 0.5 mm/min. A two-way analysis of variance and Tukey honestly significant difference statistical analyses (p&lt;0.05) indicated significant interaction between RMGIs and conditioning agents. Acid etching followed by Optibond Solo Plus provided highest bond strengths for all three RMGIs, which were not statistically different from the positive control.

Effect of Different Intermediary Bases on Microleakage of a Restorative Material in Class II Box Cavities of Primary Teeth

2017 ◽  
Vol 40 (2) ◽  
pp. 82-87 ◽  
Author(s):  
Faika Y. Abdelmegid ◽  
Fouad S. Salama ◽  
Waleed M. Al-Mutairi ◽  
Saud K. Al-Mutairi ◽  
Sultan O. Baghazal
Keyword(s):  
Primary Teeth ◽  
In Vitro Study ◽  
Class Ii ◽  
Positive Control ◽  
Negative Control ◽  
The Other ◽  
Control Groups ◽  
Significant Difference ◽  
The Mean

Introduction The aim of this in vitro study was to assess and compare the effect of different intermediary bases on microleakage between tooth and a nanocomposite interface in Class II box cavities in primary teeth. Methods Standard Class II box cavities were prepared in 52 primary molars and randomly divided into 9 groups according to the intermediary base used (Multicore Flow, Fuji II LC, SDR, Smart Dentin Replacement, and Biodentine). All specimens were subjected to thermocycling and prepared for microleakage testing and evaluation. Results There was significant difference in the mean ranks of microleakage between the 9 groups, which was observed in the gingival side (p<0.0001) and the occlusal side (p<0.0001). The mean ranks microleakage was significantly higher with experimental SDR, experimental Multicore Flow, and positive control materials when compared with the other 6 groups. The microleakage mean ranks were statistically significantly lower in experimental Fuji II LC, experimental Biodentine, and all negative control groups when compared with the other 3 groups. Conclusions Microleakage is affected by the application of intermediate material. Experimental Biodentine and Fuji II LC showed the lowest microleakage while experimental SDR and experimental Multicore Flow showed the highest microleakage.

scholarly journals Microbiological Sealing Analysis of a Tapered Connection and External Hexagon System

2017 ◽  
Vol 2017 ◽  
pp. 1-4 ◽  
Author(s):  
Gardel Nepomuceno Costa ◽  
Elizabeth Ferreira Martinez ◽  
Aluísio Martins de Oliveira Ruellas ◽  
Daiane Cristina Peruzzo ◽  
Júlio Cesar Joly ◽  
...  
Keyword(s):  
Descriptive Analysis ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Microbiological Analysis ◽  
Significance Level ◽  
Implant Abutment ◽  
Bacterial Leakage ◽  
Tapered Connection

Considering the variety of implant connection systems available in the market and the contrasting literature regarding tapered connection systems in terms of bacterial leakage, the aim of this in vitro study was to compare the effectiveness of the bacterial seal at the implant/abutment interface between an external hexagon and a tapered connection system. Twelve sets of indexed tapered connection components and twelve sets of external hexagon connection components were used for microbiological analysis. In addition, for each model, an implant with its respective prosthetic abutment was used as a negative control and another as a positive control of microbial contamination. Failure of the abutment/implant interface seal was observed via turbidity or presence of deposits in the culture. Descriptive analysis of the data and relative frequency (percentage) as well as Fisher’s exact test were used at a significance level of 5%. Two of ten (20%) external hexagon specimens showed contamination against 0/10 (0%) tapered connection implants. In conclusion, both implant/abutment connections were able to prevent bacterial leakage in vitro.

scholarly journals In vitro antimicrobial evaluation of toothpastes with natural compounds

2015 ◽  
Vol 09 (04) ◽  
pp. 580-586 ◽  
Author(s):  
Priscila de Camargo Smolarek ◽  
Luis Antonio Esmerino ◽  
Ana Cláudia Chibinski ◽  
Marcelo Carlos Bortoluzzi ◽  
Elizabete Brasil dos Santos ◽  
...  
Keyword(s):  
Therapeutic Potential ◽  
In Vitro Study ◽  
Study Groups ◽  
Natural Compounds ◽  
Antimicrobial Activities ◽  
Positive Control ◽  
Negative Control ◽  
Diffusion Method ◽  
Disk Diffusion Method

ABSTRACT Objectives: This in vitro study evaluated the antimicrobial effects of commercial toothpastes containing natural compounds. Materials and Methods: The study groups were divided based on the natural compound present in the toothpaste composition: Sorbitol (I), tocopherol (II), mint (III), cinnamon/mint (IV), propolis/melaleuca (V), mint/açai (VI), mint/guarana (VII), propolis (VIII), negative control (IX), and the positive control (X). The antimicrobial properties of the toothpastes were tested using the disk diffusion method against oral pathogens: Streptococcus mutans, Pseudomonas aeruginosa, and Enterococcus faecalis. The resulting inhibition halos were measured in millimeters. Results: The data indicated that the bacteria responded differently to the toothpastes (P < 0.0001). The diameters of the inhibition halos against S. mutans were in decreasing order of efficacy: Propolis/melaleuca > mint/guarana > mint/açai > sorbitol > tocopherol > cinnamon/mint > propolis > mint (P < 0.001 vs. negative control). E. faecalis showed variable responses to the dentifrices in the following order of decreasing efficacy: Mint/guarana > propolis > sorbitol > mint/açai > tocopherol > cinnamon/mint > mint = propolis/melaleuca = negative control. The product with the highest antimicrobial activity was mint/guarana, which was significantly different than propolis/melaleuca, mint, cinnamon/mint, and tocopherol and negative control (P < 0.001). The statistical analysis indicated that propolis, sorbitol, and mint/açai did not show any differences compared to mint/guarana (P > 0.05) and positive control (P > 0.05). P. aeruginosa was resistant to all dental gels tested including positive control. Conclusion: The toothpastes with natural compounds have therapeutic potential and need more detailed searches for the correct clinic therapeutic application. The results from this study revealed differences in the antimicrobial activities of commercial toothpastes with natural compounds.

scholarly journals Effects of a bleaching agent with calcium on bovine enamel

2014 ◽  
Vol 08 (03) ◽  
pp. 320-325 ◽  
Author(s):  
Larissa Alexandrino ◽  
Yasmin Gomes ◽  
Eliane Alves ◽  
Hilton Costi ◽  
Hervé Rogez ◽  
...  
Keyword(s):  
Artificial Saliva ◽  
In Vitro Study ◽  
Negative Control ◽  
Double Blind ◽  
Tristimulus Colorimetry ◽  
Mean Values ◽  
Significant Difference ◽  
Bovine Enamel ◽  
Bleaching Treatment

ABSTRACT Objective: This in vitro study analyzed the effects of a bleaching treatment containing 35% hydrogen peroxide (HP) with or without calcium on bovine enamel, using the Knoop hardness number (KHN), tristimulus colorimetry (TC), and scanning electron microscopy. Materials and Methods: Forty-five specimens were randomly divided into groups (n = 5), which included artificial saliva (negative control [NC]), 35% HP (positive control [PC]), and 35% HP Blue Calcium (HP Blue). The specimens were subjected to three bleaching sessions. During the sessions, the specimens were immersed in artificial saliva at 37°C. Before and after bleaching, KHN tests were conducted using a force of 25 gf for 5 s. TC was performed using the CIE-L*a*b* system and readouts were obtained at the following 4 time points: Before the bleaching treatment; after the first session, the second session, and the third session. The specimens were dehydrated and coated with gold, and the photomicrographs were analyzed in a double-blind manner with a LEO microscope. Results: Using one-way analysis of variance and Tukey's test (P < 0.05), a statistically significant difference was identified between the initial and final mean KHNs of the NC and PC groups, while the initial and final mean KHNs were not significantly different in the HP Blue group. The final mean values of ⋄E, ⋄L, and ⋄b of the PC and HP Blue groups were significantly higher than the initial values (P < 0.01 for both). The photomicrographs revealed no differences among the groups. Conclusions: Therefore, treatment with HP Blue prevented changes in the KHN without reducing the efficacy of bleaching.

In Vitro Study on Protoscolicidal Effect of Methanolic Extract of Allium hirtifolium on Protoscoleces of Cystic Echinococcosis

2019 ◽  
Vol 19 (3) ◽  
pp. 264-268
Author(s):  
Z. Shahamir Tabatabaei ◽  
S. Dehshahri ◽  
M.M. Taghi ◽  
F. Esfandiari ◽  
F.S. Sadjjadi ◽  
...  
Keyword(s):  
Cystic Echinococcosis ◽  
Allium Sativum ◽  
Methanolic Extract ◽  
In Vitro Study ◽  
Cyst Formation ◽  
Positive Control ◽  
Negative Control ◽  
Cyst Rupture ◽  
Allium Hirtifolium

Background: Cystic echinococcosis/ hydatidosis is one of the most important parasitic zoonoses worldwide. Usually, surgery is used for the treatment of active cysts. Due to the risk of cyst rupture during surgery, a protoscolicidal agent is usually injected into the cyst before surgery to prevent secondary cyst formation in case of cyst rupture. Due to the side effects of chemical protoscolicidal agents attempts have been focused on herbal medicine. In this regard, Allium sativum has already been used; however, the protoscolicidal effect of Allium hirtifolium from Allium family has not been investigated, so far. Objective: The present study was conducted in order to assess the protoscolicidal effect of methanolic extract of Allium hirtifolium in different concentrations, temperature and exposure times. Cetrimide as a positive control and DMSO as a negative control were also used in this study. Methods: The viability of protoscoleces was determined by 0.1% eosin staining method. Results: The protoscolicidal effect of Allium hirtifolium on protoscoleces was as follows: The mean percent and standard deviation (SD) of protoscolicidal activity of 50 mg/ml concentration of Allium hirtifolium extract in room temperature at 10, 20, 30, 40 and 50 minutes of exposure was 5.88±2.39, 8.59±4.54, 11.82±5.81, 12.31±6.16and 16.96±8.42 respectively; while at 37°C it was 9.10±5.01, 11.52±7.36, 18.64±4.36, 27.07±6.57 and 38.15±12.80, respectively. Conclusion: In conclusion, although Allium hirtifolium from Allium family is similar to Allium sativum; the protoscolicidal effect of its methanolic extract is not similar and less than A. sativum extract.

Sign in / Sign up

Export Citation Format

Share Document