scholarly journals Bridging the gaps; imaging of catalytic materials under reaction conditions

2014 ◽  
Vol 70 (a1) ◽  
pp. C947-C947
Author(s):  
Andrew Beale

Industrial catalysis utilizes mainly μm to mm-sized catalyst particles in catalytic reactors instead of powders since this minimizes problems associated with for example back pressure and clogging. In recent times, efforts have been made to study and characterize these `real life' single particles so as to determine the nature of chemical species present in 2D and 3D during various stages of the catalyst lifetime such as preparation, reaction and deactivation. Traditionally this sort of analysis is performed on ex situ samples using invasive approaches which often interfere with the chemical process under study and the subsequent conclusions that can be drawn. As a result there has been a recent move towards studying these processes non-invasively and where possible, dynamically in order to understand in detail how the chemistry evolves within catalyst particles and how this and the spatial distribution of the various chemical components influence catalytic behaviour. For this purpose we have developed synchrotron-based X-ray Computed Tomography imaging techniques for studying catalytic solids in real time in order to examine how the active phases form, how they behave under reaction conditions and why they eventually deactivate.

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Pasquale Delogu ◽  
Vittorio Di Trapani ◽  
Luca Brombal ◽  
Giovanni Mettivier ◽  
Angelo Taibi ◽  
...  

Abstract The limits of mammography have led to an increasing interest on possible alternatives such as the breast Computed Tomography (bCT). The common goal of all X-ray imaging techniques is to achieve the optimal contrast resolution, measured through the Contrast to Noise Ratio (CNR), while minimizing the radiological risks, quantified by the dose. Both dose and CNR depend on the energy and the intensity of the X-rays employed for the specific imaging technique. Some attempts to determine an optimal energy for bCT have suggested the range 22 keV–34 keV, some others instead suggested the range 50 keV–60 keV depending on the parameters considered in the study. Recent experimental works, based on the use of monochromatic radiation and breast specimens, show that energies around 32 keV give better image quality respect to setups based on higher energies. In this paper we report a systematic study aiming at defining the range of energies that maximizes the CNR at fixed dose in bCT. The study evaluates several compositions and diameters of the breast and includes various reconstruction algorithms as well as different dose levels. The results show that a good compromise between CNR and dose is obtained using energies around 28 keV.


2020 ◽  
Vol 8 ◽  
Author(s):  
Ting Feng ◽  
Yejing Xie ◽  
Weiya Xie ◽  
Dean Ta ◽  
Qian Cheng

Photoacoustic (PA) signal analysis based on ultrasonic wave detection can provide both high-sensitivity optical contrast information and micro-architectural information which is highly related with the chemical composition of tissue. In this study, the feasibility assessment of bone composition assessment was investigated using the multi-wavelength PA analysis (MWPA) method which could reflect the molecular information. By illuminating a bone specimen using a laser light with wavelength over an optical spectrum ranging from 680 to 950 nm, the optical absorption spectrum of the bone was acquired. Then, with the optical absorption spectra of all optical absorption chemical components in the known bone, a spectral unmixing procedure was performed to quantitatively assess the relative content of each chemical component. The experimental results from rabbit bones show that MWPA method can be used to assess chemical components related to bone metabolism. Our study confirmed that PA technique can be used as a novel bone diagnostic technique by providing new information about the quantity of bone and identifying biomarkers of bone that can improve the current diagnostic imaging techniques.


2017 ◽  
Vol 7 ◽  
pp. 184798041668716 ◽  
Author(s):  
Yanshuang Chen ◽  
Qin Chen ◽  
Hong Mao ◽  
Ting Zhang ◽  
Xiaoyan Qiu ◽  
...  

Using an FeOOH/Mg(OH)2 precursor, maghemite-based magnetic nanoparticles can be prepared by a chemically induced transition in an Iron(II) chloride (FeCl2) treating solution. FeCl2 solutions of various concentrations were used to investigate the dependence of sample components and magnetization on the treating solution. The bulk chemical species, crystal structures, surface chemical components, morphologies, and specific magnetizations of the samples were characterized. When the concentration of FeCl2 solution was in a moderate range of 0.060–0.250 M, maghemite nanoparticles coated by hydromolysite, that is, maghemite/hydromolysite nanoparticles, could be prepared. At lower concentrations, below 0.030 M, the samples contained maghemite/hydromolysite and magnesium oxide nanoparticles, and at higher concentrations, up to 1.000 M, the samples contained maghemite/hydromolysite and hydromolysite nanoparticles. The molar and mass percentages of each phase were estimated for each sample. The apparent magnetization behavior of the samples, which exhibited a non-monotonic variation with increasing concentration of FeCl2 solution, is explained from the variation of mass percentage of the maghemite phase with concentration.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Stephanie Kulpe ◽  
Martin Dierolf ◽  
Benedikt Günther ◽  
Madleen Busse ◽  
Klaus Achterhold ◽  
...  

Abstract In clinical diagnosis, X-ray computed tomography (CT) is one of the most important imaging techniques. Yet, this method lacks the ability to differentiate similarly absorbing substances like commonly used iodine contrast agent and calcium which is typically seen in calcifications, kidney stones and bones. K-edge subtraction (KES) imaging can help distinguish these materials by subtracting two CT scans recorded at different X-ray energies. So far, this method mostly relies on monochromatic X-rays produced at large synchrotron facilities. Here, we present the first proof-of-principle experiment of a filter-based KES CT method performed at a compact synchrotron X-ray source based on inverse-Compton scattering, the Munich Compact Light Source (MuCLS). It is shown that iodine contrast agent and calcium can be clearly separated to provide CT volumes only showing one of the two materials. These results demonstrate that KES CT at a compact synchrotron source can become an important tool in pre-clinical research.


2018 ◽  
Author(s):  
Zirui Liu ◽  
Wenkang Gao ◽  
Yangchun Yu ◽  
Bo Hu ◽  
Jinyuan Xin ◽  
...  

Abstract. The Campaign on atmospheric Aerosol REsearch network of China (CARE-China) is a long-term project for the study of the spatiotemporal distributions of physical aerosol characteristics as well as the chemical components and optical properties of aerosols over China. This study presents the first long-term datasets from this project, including three years of observations of online PM2.5 mass concentrations (2012–2014) and one year of observations of PM2.5 compositions (2012–2013) from the CARE-China network. The average PM2.5 concentrations at 20 urban sites is 73.2 μg/m3 (16.8–126.9 μg/m3), which was three times higher than the average value from the 12 background sites (11.2–46.5 μg/m3). The PM2.5 concentrations are generally higher in east-central China than in the other parts of the country due to their relative large particulate matter (PM) emissions and the unfavorable meteorological conditions for pollution dispersion. A distinct seasonal variability of the PM2.5 is observed, with highs in the winter and lows during the summer at urban sites. Inconsistent seasonal trends were observed at the background sites. Bimodal and unimodal diurnal variation patterns were identified at both urban and background sites. The chemical compositions of PM2.5 at six paired urban and background sites located within the most polluted urban agglomerations and cleanest regions of China were analyzed. The major PM2.5 constituents across all the urban sites are organic matter (OM, 26.0 %), SO42− (17.7 %), mineral dust (11.8 %), NO3− (9.8 %), NH4+ (6.6 %), elemental carbon (EC) (6.0 %), Cl− (1.2 %) at 45 % RH and residual matter (20.7 %). Similar chemical compositions of PM2.5 were observed at background sites but were associated with higher fractions of OM (33.2 %) and lower fractions of NO3− (8.6 %) and EC (4.1 %). Significant variations of the chemical species were observed among the sites. At the urban sites, the OM ranged from 12.6 μg/m3 (Lhasa) to 23.3 μg/m3 (Shenyang), the SO42− ranged from 0.8 μg/m3 (Lhasa) to 19.7 μg/m3 (Chongqing), the NO3− ranged from 0.5 μg/m3 (Lhasa) to 11.9 μg/m3 (Shanghai) and the EC ranged from 1.4 μg/m3 (Lhasa) to 7.1 μg/m3 (Guangzhou). The PM2.5 chemical species at the background sites exhibited larger spatial heterogeneities than those at urban sites, suggesting the different contributions from regional anthropogenic or natural emissions and from the long-range transport to background areas. Notable seasonal variations of PM2.5 polluted days were observed, especially for the megacities in east-central China, resulting in frequent heavy pollution episodes occurring during the winter. The evolution of the PM2.5 chemical compositions on polluted days was similar for the urban and nearby background sites, suggesting the significant regional pollution characteristics of the most polluted areas of China. However, the chemical species dominating the evolutions of the heavily polluted events were different in these areas, indicating that unique mitigation measures should be developed for different regions of China. This analysis reveals the spatial and seasonal variabilities of the urban and background aerosol concentrations on a national scale and provides insights into their sources, processes, and lifetimes.


2010 ◽  
Vol 98 (6) ◽  
Author(s):  
R. Juncosa ◽  
I. Font ◽  
J. Delgado

AbstractRadioactive decay is an important subject to take into account when studying the thermo-hydro-dynamic behavior of the buffer clay material used in the containment of radioactive waste. The modern concepts for the multibarrier design of a repository of high level waste in deep geologic formations consider that once canisters have failed, the buffer clay material must ensure the retention and/or delay of radionuclides within the time framework given in the assessment studies. Within the clay buffer, different chemical species are retarded/fixed according to several physicochemical processes (ion exchange, surface complexation, precipitation, matrix diffusion, ...) but typical approaches do not consider the eventuality that radioactive species change their chemical nature (The radioactive decay of an element takes place independently of the phase (aqueous, solid or gaseous) to which it belongs. This means that, in terms of radionuclide fixation, some geochemical processes will be effective scavengers (for instance mineral precipitation of crystal growth) while others will not (for instance ion exchange and/or sorption).In this contribution we present a reactive radioactive decay model of any number of chemical components including those that belong to decay series. The model, which is named FLOW-DECAY, also takes into account flow and isotopic migration and it has been applied considering a hypothetical model scenario provided by the project ENRESA 2000 and direct comparison with the results generated by the probabilistic code GoldSim. Results indicate that FLOW-DECAY may simulate the decay processes in a similar way that GoldSim, being the differences related to factors associated to code architecture.


2017 ◽  
Vol 13 (5) ◽  
pp. 533-544 ◽  
Author(s):  
Juliana D'Andrilli ◽  
Christine M. Foreman ◽  
Michael Sigl ◽  
John C. Priscu ◽  
Joseph R. McConnell

Abstract. Englacial ice contains a significant reservoir of organic material (OM), preserving a chronological record of materials from Earth's past. Here, we investigate if OM composition surveys in ice core research can provide paleoecological information on the dynamic nature of our Earth through time. Temporal trends in OM composition from the early Holocene extending back to the Last Glacial Maximum (LGM) of the West Antarctic Ice Sheet Divide (WD) ice core were measured by fluorescence spectroscopy. Multivariate parallel factor (PARAFAC) analysis is widely used to isolate the chemical components that best describe the observed variation across three-dimensional fluorescence spectroscopy (excitation–emission matrices; EEMs) assays. Fluorescent OM markers identified by PARAFAC modeling of the EEMs from the LGM (27.0–18.0 kyr BP; before present 1950) through the last deglaciation (LD; 18.0–11.5 kyr BP), to the mid-Holocene (11.5–6.0 kyr BP) provided evidence of different types of fluorescent OM composition and origin in the WD ice core over 21.0 kyr. Low excitation–emission wavelength fluorescent PARAFAC component one (C1), associated with chemical species similar to simple lignin phenols was the greatest contributor throughout the ice core, suggesting a strong signature of terrestrial OM in all climate periods. The component two (C2) OM marker, encompassed distinct variability in the ice core describing chemical species similar to tannin- and phenylalanine-like material. Component three (C3), associated with humic-like terrestrial material further resistant to biodegradation, was only characteristic of the Holocene, suggesting that more complex organic polymers such as lignins or tannins may be an ecological marker of warmer climates. We suggest that fluorescent OM markers observed during the LGM were the result of greater continental dust loading of lignin precursor (monolignol) material in a drier climate, with lower marine influences when sea ice extent was higher and continents had more expansive tundra cover. As the climate warmed, the record of OM markers in the WD ice core changed, reflecting shifts in carbon productivity as a result of global ecosystem response.


1995 ◽  
Vol 406 ◽  
Author(s):  
U. Rossowl ◽  
L. Mantese ◽  
U. Frotscher ◽  
D. E. Aspnes ◽  
W. Richter

AbstractWe report surface-induced optical anisotropy (SIOA) spectra and dielectric function data of vicinal Si(001) surfaces using reflectance-difference spectroscopy (RDS) and spectroscopic ellipsometry (SE). To find the main contributions of the optical response we took data for clean and by hydrogen, oxygen, and arsenic modified surfaces. The SIOA lineshapes, as measured by reflectance-difference (RD) spectroscopy, can be either derivative-like or similar to the dielectric function as measured by SE. The derivative-like spectra appear to be associated with step contributions while the dielectric-function-like behavior appears to arise from terrace dimers and/or changes in chemical species bonded to the steps. In addition, we present SE data of silicon nanostructures formed by electrochemical etching and find that their behavior is dominated by interface properties.


2012 ◽  
Vol 1475 ◽  
Author(s):  
D.L. Engelberg ◽  
J.A. Duff ◽  
L. Murray ◽  
L. Dodds ◽  
N. Mobasher ◽  
...  

ABSTRACTA range of advanced imaging techniques have been brought together to provide a comprehensive picture of cement microstructure for nuclear waste immobilization. Image analysis of Nirex Reference Vault Backfill (NRVB) has been used to characterize the Calcium-Silicate-Hydrate (C-S-H) matrix fraction. Through weight loss measurements and digital image correlation of OPC-based cement blends we have quantified the development of microstructure surface strains during the initial 48 hrs hardening period. The build-up of displacements on the microstructure scale indicated grain-like compressive areas, surrounded by a network of tensile regions. Serial sectioning of NRVB using ultra-microtome cutting has been explored for advanced high-resolution 3D microstructure characterization, while X-ray Computed Tomography (XCT) has been used to obtain information of the 3-D pore space and size distribution of air pores in NRVB non-destructively.


Sign in / Sign up

Export Citation Format

Share Document