Wear performance and its online monitoring of the semimetal brake lining for automobiles

2014 ◽  
Vol 66 (1) ◽  
pp. 100-105 ◽  
Author(s):  
Yan Yin ◽  
Jiusheng Bao ◽  
Lei Yang
Keyword(s):  
Experimental Data ◽  
Wear Rate ◽  
Monitoring System ◽  
Online Monitoring ◽  
Electronic Control Unit ◽  
Wear Performance ◽  
Content Type ◽  
Disc Brakes ◽  
Wear Monitoring ◽  
Brake Lining

Purpose – In order to improving the braking reliability and assuring the driving safety of automobiles, this paper aims at the wear performance and its online monitoring of its brake lining. Design/methodology/approach – The wear performance of the semimetal brake lining for automobiles was investigated on a self-made braking tester for disc brakes. Based on the experimental data, an intelligent forecasting model for the wear rate was established by the artificial neural network (ANN) technology. And by taking it as a core, an online braking wear monitoring system for automobiles was designed. Findings – It is shown that the wear rate rises obviously with the increasing of both initial braking velocity and braking pressure. By the contrast, the initial braking velocity affects the wear rate more seriously. The ANN model trained by the experimental data shows favorable capability for predicting of the wear rate. The big forecasting errors at high velocity and heavy load should be attributed to the jumping of the wear rate at this period. Based on the existed sensors and electronic control unit system of automobiles, the online braking wear monitoring system can be established easily by the ANN technology. Originality/value – A self-made braking tester for disc brakes was used to test the wear performance, which can simulate better the actual disc braking conditions than the standard pin-on-disc friction tester. An online braking wear monitoring system was designed to help improving the braking reliability and safety of automobiles.

The effect of colemanite on the friction performance of automotive brake friction materials

2016 ◽  
Vol 68 (1) ◽  
pp. 92-98 ◽  
Author(s):  
ilker Sugozu ◽  
ibrahim mutlu ◽  
Kezban Banu Sugozu
Keyword(s):  
Friction Coefficient ◽  
Friction And Wear ◽  
Negative Effects ◽  
Wear Performance ◽  
Industrial Firms ◽  
Friction Materials ◽  
Content Type ◽  
Friction Performance ◽  
Brake Lining ◽  
Automotive Brake

Purpose – The purpose of this paper is to investigate use of colemanite (C) upon friction and wear performance of automotive brake lining. Brake lining production with the boron product colemanite addition and braking characterization investigated for development of non-asbestos organic (NAO) brake lining because of negative effects on human health and environmental hazard of asbestos containing linings. During the braking, brake lining is warmed up extremely due to friction, and the high temperature causes to decreasing of breaking performance. Colemanite has high melting temperature, and this makes this material valuable for brake lining. Design/methodology/approach – This study investigated the effect of colemanite (C) upon friction and wear performance of automotive brake lining. Based on a simple experimental formulation, different amounts of boron product colemanite were used and then evaluated using a friction assessment and screening test. In these specimens, half of the samples (shown with H indices) were heat treated in 4 h at 180°C temperature. Friction coefficient, wear rate and scanning electron microscope for friction surfaces were used to assess the performance of these samples. Findings – The results of test showed that colemanite can substantially improve properties of friction materials. The friction coefficient of friction materials modified with colemanite varies steadily with the change of temperature, and the wearing rate of friction materials is relatively low by using colemanite. Heat treatment-applied samples (CH) have provided a higher and stable friction coefficient. These results indicate that colemanite has ideal application effect in various friction materials. Originality/value – This paper fulfils an identified information and offers practical help to the industrial firms working with brake lining and also to the academicians working on wear of materials. Parallel results have been presented between previously reported and present study, in view of brake characteristics and wear resistance. Use of the lower cost and productive organic sources of material are the main improvement of the present study.

Fretting wear behavior of WS2/ultra-high molecular weight polyethylene nanocomposites

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Xiaocui Xin ◽  
Yunxia Wang ◽  
Zhaojie Meng ◽  
Hao Liu ◽  
Yunfeng Yan ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Peer Review ◽  
High Molecular Weight ◽  
Fretting Wear ◽  
Specific Wear Rate ◽  
Wear Performance ◽  
Content Type ◽  
Ultra High Molecular Weight

Purpose This paper aims to focus on studying the addition of nano-tungsten disulfide (WS2) on fretting wear performance of ultra-high-molecular-weight-polyethylene (UHMWPE). Design/methodology/approach In this study, the effect of WS2 content on fretting wear performance of UHMWPE was investigated. The fretting wear performance of the UHMWPE and WS2/UHMWPE nanocomposites were evaluated on oscillating reciprocating friction and wear tester. The data of the friction coefficient and the specific wear rate were obtained. The worn surfaces of composites were observed. The transfer film and its component were analyzed. Findings With the addition of 0.5% WS2, the friction coefficient and specific wear rate increased. With the content increased to 1% and 1.5%, the friction coefficient and specific wear rate decreased. The lowest friction coefficient and specific wear rate were obtained with the addition of 1.5% nano-WS2. Continuingly increasing content, the friction coefficient and wear rate increased but lower than that of pure UHMWPE. Research limitations/implications The research indicated the fretting wear performance related to the content of nano-WS2 with the incorporation of WS2 into UHMWPE. Practical implications The result may help to choose the appropriate content. Originality/value The main originality of the research is to reveal the fretting behavior of UHMWPE and WS2/UHMWPE nanocomposites. It makes us realize the nano-WS2 had an effect on the fretting wear performance of UHMWPE. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2020-0151/

Wear performance of Al-TiC composite at elevated temperature

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Eshan Agrawal ◽  
Vinod Tungikar
Keyword(s):  
Elevated Temperature ◽  
Wear Rate ◽  
Coefficient Of Friction ◽  
Elevated Temperatures ◽  
Centrifugal Casting ◽  
Wear Test ◽  
Heating Chamber ◽  
Wear Performance ◽  
Content Type ◽  
Pin On Disc

Purpose Aluminium matrix composites are subjected to wear as well as higher temperature applications such as pistons, cylinder heads and blocks for car engines. Therefore, it is important to evaluate the performance of aluminium metal matrix composite at elevated temperature. Design/methodology/approach In the present work wear performance of Al-TiC composite with 7.5% reinforcement of TiC powder is carried out at elevated temperature. The composite specimens are prepared with the help of centrifugal casting method to get the large segregation of reinforcement on the outer layer of the composite which is subjected to wear. Taguchi method is used for preparing design of experiments. Findings The wear test is performed on DUCOM pin on disc setup having the heating chamber facility. The results of wear test are analysed with the help of MINITAB 19 software. The results show that temperature has dominant effect on the wear rate. The mathematical model through regression is predicted for wear rate and coefficient of friction. The study of worn-out surface is performed with the help of scanning electron microscope. The micrographs show that the type of wear is changes from abrasive to severe wear and some delamination. Originality/value The experiments are conducted as per ASTM standards. The results give the mathematical equation for wear rate and coefficient of friction at elevated temperatures.

Dry sliding friction and wear behavior of self-lubricating wollastonite filled polycarbonate composites

2015 ◽  
Vol 67 (1) ◽  
pp. 22-29 ◽  
Author(s):  
Akin Akinci
Keyword(s):  
Wear Rate ◽  
Friction And Wear ◽  
Sliding Friction ◽  
Wear Behavior ◽  
Xrd Analysis ◽  
Dry Sliding ◽  
Wear Performance ◽  
Content Type ◽  
Wear Rates ◽  
Wear Tests

Purpose – The purpose of this paper is to investigate the friction and wear performance of pure polycarbonate (PC) and 5-30 per cent wollastonite-filled (by weight) PC were comparatively evaluated under dry sliding conditions. Wear tests were carried out at room temperature under the loads of 5-20 N and at the sliding speeds of 0.5-1.5 m/s. Design/methodology/approach – The microstructures of the wollastonite, pure PC and composites were examined by optical microscopy, scanning electron microscopy, energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) analysis. The friction and wear tests were realized using a pin-on-disk arrangement against the hardened AISI 4140 steel. Findings – The result of this study indicated that the coefficients of friction wear rate of the materials were significantly influenced by an increase in wollastonite content. The friction coefficient of the PC was getting decreased from 0.457 to 0.198 with an increase in wollastonite content, depending on applied loads and sliding speeds. On the other hand, the results showed that the wear rates of pure PC and wollastonite-filled PCs decreased with an increase in loads. The wear rate of the PC decreased from 1.2 × 10−6 to 8.7 × 10−6 mm3/m with an increase in wollastonite content, depending on applied loads. Originality/value – There are many reports which deal with the friction and wear performance of the polymers and polymer composites. However, the effect of wollastonite effect on tribological performance of PC has up to now not been extensively researched.

The improvement of XD-MSM friction tester based on Labview

2016 ◽  
Vol 13 (2) ◽  
pp. 177-180
Author(s):  
Guimei Wang ◽  
Xiaomei Li
Keyword(s):  
Wear Rate ◽  
Real Time ◽  
Detection System ◽  
Friction Pair ◽  
Displacement Sensor ◽  
Driving Safety ◽  
Friction Test ◽  
Content Type ◽  
Real Time Detection ◽  
Brake Lining

Purpose With the widespread use and development of automobile, much attention has been paid to its security issues. So to ensure the driving safety, the automobile must be equipped with good braking performance. In the process of braking, the friction from friction pair causes continuous wear and tear of the surface of brake lining and increases the gap between break pairs, until the lining is not being used (Belhocinea et al., 2014); thus, it is very important to detect the lining wear rate. Design/methodology/approach This paper designed the automobile brake friction test wear rate detection system based on Labview. Findings Through the detect data, we find that the automobile brake lining wear rate detection system has higher detect accuracy, in the process of detection, the brake lining without the defects such as cracks and bulges, which shall effect the normal use, the lining has no remarkable scratch to disk friction surface, can completed meet the requirements of users. Originality/value The automobile brake friction test wear rate detecting system adopts the components of USB-9211 DAQ, optoNCDT1700 non-contract high accuracy displacement sensor, in addition the Labview software to complete the functions such as lining wear rate real time detection, data multichannel real time acquisition, display, and storage record, etc., and uses LabSQL to import the detecting data to Microsoft Access database, which can satisfy the demands of various customers. Moreover, the wear rate real time detection can reflect the lining’s wear regulation of different manufacturers and different material and provide a reliable basis for selecting the appropriate lining material and predicting the lining’s lifetime.

Effects of fly ash content on the friction-wear performance of bronze-based brake lining materials produced by the hot-pressing method

2015 ◽  
Vol 67 (6) ◽  
pp. 612-621 ◽  
Author(s):  
Hüsamettin Kus ◽  
Duran Altiparmak
Keyword(s):  
Fly Ash ◽  
Hot Pressing ◽  
Wear Test ◽  
Ash Content ◽  
Wear Properties ◽  
Wear Performance ◽  
Pressing Method ◽  
Content Type ◽  
Lining Material ◽  
Brake Lining

Purpose – The purpose of this paper is to investigate the effect of fly ash content on the friction–wear performance of bronze-based brake lining material. Design/methodology/approach – In this study, bronze-based brake linings containing 0-12 weight per cent fly ash were produced by the hot-pressing process. The friction-wear properties of the unreinforced bronze matrix brake lining material and fly ash reinforced samples were investigated using a Chase-type friction tester. The hardness and density of the samples were also determined. The microstructures and friction surfaces of the samples were examined using scanning electron microscopy. Findings – The experimental results showed that the fly ash content significantly affects the friction-wear properties of the brake lining material. It was found that the friction coefficient increases with the increase in the fly ash content for the brake lining materials studied. Moreover, the mass losses in the wear test were lower for the brake linings containing over 4 weight per cent fly ash than unreinforced bronze-based lining material. Originality/value – This study has proven to be useful in exploring fly ash particles as low cost reinforcing materials in improving the friction–wear performance of bronze-based brake lining material. In addition, the use of fly ash particles in the manufacture of brake lining materials contributes to reducing the production cost of brake linings and to a sustainable environment.

Friction and wear properties of friction materials containing nano/micro-sized SiO2 particles

2016 ◽  
Vol 68 (2) ◽  
pp. 259-266 ◽  
Author(s):  
Kezban Banu Sugozu ◽  
Behcet Daghan ◽  
Ahmet Akdemir ◽  
Necati Ataberk
Keyword(s):  
Friction Coefficient ◽  
Friction And Wear ◽  
Poor Performance ◽  
Wear Properties ◽  
Wear Performance ◽  
Content Type ◽  
Conventional Procedure ◽  
Friction And Wear Properties ◽  
Sio2 Particles ◽  
Brake Lining

Purpose – Among the components used for a car brake lining, the chemical and structural properties of the abrasives, jointly with the morphology and size of the particles influence the friction parameters and stability of the composite. This paper aims to investigate the effect of nano SiO2 particles in brake pads on friction and wear properties. Design/methodology/approach – In this paper, the effects of SiO2 (Silica) particles of varying size on the friction-wear properties of polymeric friction composites are investigated. Four friction composites were prepared containing (5, 10 Wt.%) micro silica (MS) particles and (5, 10 Wt.%) nano silica (NS) particles. The samples were produced by a conventional procedure for a dry formulation following dry-mixing, pre-forming and hot pressing. Friction and wear characteristics of the specimens against to a disk made of cast iron were studied. Friction coefficient, specific wear rate and hardness of specimens were obtained. Detailed examinations on the worn surface were analyzed using a scanning electron microscope. Findings – The results of test showed that the inclusion of nano silicon carbide (SiC) powder improved the wear performance significantly. Friction coefficient (μ) of NS samples was higher than the MS samples. Micro-SiC showed poor performance and μ. High wear performance was exhibited in materials containing 5 Wt.% NS and 10 Wt.% NS. Originality/value – This paper emphasizes the importance of nano-composites in the automotive industry and helps to industrial firms and academicians working on wear of materials.

Study on high-temperature wear and mechanism of Al-Si/graphite composites prepared by the die-casting process

2020 ◽  
Vol 72 (10) ◽  
pp. 1153-1158 ◽  
Author(s):  
Yafei Deng ◽  
Xiaotao Pan ◽  
Guoxun Zeng ◽  
Jie Liu ◽  
Sinong Xiao ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Peer Review ◽  
Die Casting ◽  
Casting Machine ◽  
Injection Pressure ◽  
Casting Process ◽  
Matrix Alloy ◽  
Content Type ◽  
The Matrix

Purpose This paper aims to improve the tribological properties of aluminum alloys and reduce their wear rate. Design/methodology/approach Carbon is placed in the model at room temperature, pour 680°C of molten aluminum into the pressure chamber, and then pressed it into the mold containing carbon felt through a die casting machine, and waited for it to cool, which used an injection pressure of 52.8 MPa and held the same pressure for 15 s. Findings The result indicated that the mechanical properties of matrix and composite are similar, and the compressive strength of the composite is only 95% of the matrix alloy. However, the composite showed a low friction coefficient, the friction coefficient of Gr/Al composite is only 0.15, which just is two-third than that of the matrix alloy. Similarly, the wear rate of the composite is less than 4% of the matrix. In addition, the composite can avoid severe wear before 200°C, but the matrix alloy only 100°C. Originality/value This material has excellent friction properties and is able to maintain this excellent performance at high temperatures. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0454/

scholarly journals Sliding Wear of Conventional and Suspension Sprayed Nanocomposite WC-Co Coatings: An Invited Review

2021 ◽  
Author(s):  
R. Ahmed ◽  
O. Ali ◽  
C. C. Berndt ◽  
A. Fardan
Keyword(s):  
Wear Rate ◽  
Thermal Spray ◽  
Sliding Wear ◽  
Failure Modes ◽  
Thermal Spray Coatings ◽  
Annual Growth Rate ◽  
Total Energy Consumption ◽  
Wear Performance ◽  
Wear Rates ◽  
Spray Coatings

AbstractThe global thermal spray coatings market was valued at USD 10.1 billion in 2019 and is expected to grow at a compound annual growth rate of 3.9% from 2020 to 2027. Carbide coatings form an essential segment of this market and provide cost-effective and environmental friendly tribological solutions for applications in aerospace, industrial gas turbine, automotive, printing, oil and gas, steel, and pulp and paper industries. Almost 23% of the world’s total energy consumption originates from tribological contacts. Thermal spray WC-Co coatings provide excellent wear resistance for industrial applications in sliding and rolling contacts. Some of these applications in abrasive, sliding and erosive conditions include sink rolls in zinc pots, conveyor screws, pump housings, impeller shafts, aircraft flap tracks, cam followers and expansion joints. These coatings are considered as a replacement of the hazardous chrome plating for tribological applications. The microstructure of thermal spray coatings is however complex, and the wear mechanisms and wear rates vary significantly when compared to cemented WC-Co carbides or vapour deposition WC coatings. This paper provides an expert review of the tribological considerations that dictate the sliding wear performance of thermal spray WC-Co coatings. Structure–property relationships and failure modes are discussed to grasp the design aspects of WC-Co coatings for tribological applications. Recent developments of suspension sprayed nanocomposite coatings are compared with conventional coatings in terms of performance and failure mechanisms. The dependency of coating microstructure, binder material, carbide size, fracture toughness, post-treatment and hardness on sliding wear performance and test methodology is discussed. Semiempirical mathematical models of wear rate related to the influence of tribological test conditions and coating characteristics are analysed for sliding contacts. Finally, advances for numerical modelling of sliding wear rate are discussed.

scholarly journals Influence of Test Conditions on Sliding Wear Performance of High Velocity Air Fuel-Sprayed WC–CoCr Coatings

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3074
Author(s):  
Kaveh Torkashvand ◽  
Vinod Krishna Selpol ◽  
Mohit Gupta ◽  
Shrikant Joshi
Keyword(s):  
Wear Rate ◽  
Test Performance ◽  
Sliding Wear ◽  
Normal Load ◽  
Specific Wear Rate ◽  
Wear Behaviour ◽  
Wear Performance ◽  
Test Conditions ◽  
Test Parameters ◽  
Sliding Distance

Sliding wear performance of thermal spray WC-based coatings has been widely studied. However, there is no systematic investigation on the influence of test conditions on wear behaviour of these coatings. In order to have a good understanding of the effect of test parameters on sliding wear test performance of HVAF-sprayed WC–CoCr coatings, ball-on-disc tests were conducted under varying test conditions, including different angular velocities, loads and sliding distances. Under normal load of 20 N and sliding distance of 5 km (used as ‘reference’ conditions), it was shown that, despite changes in angular velocity (from 1333 rpm up to 2400 rpm), specific wear rate values experienced no major variation. No major change was observed in specific wear rate values even upon increasing the load from 20 N to 40 N and sliding distance from 5 km to 10 km, and no significant change was noted in the prevailing wear mechanism, either. Results suggest that no dramatic changes in applicable wear regime occur over the window of test parameters investigated. Consequently, the findings of this study inspire confidence in utilizing test conditions within the above range to rank different WC-based coatings.

Sign in / Sign up

Export Citation Format

Share Document