The role of shell/core saturation level on the accuracy and mechanical characteristics of porous calcium phosphate models produced by 3Dprinting

2015 ◽  
Vol 21 (1) ◽  
pp. 43-55 ◽  
Author(s):  
Miguel Castilho ◽  
Barbara Gouveia ◽  
Inês Pires ◽  
Jorge Rodrigues ◽  
Manuel Pereira
Keyword(s):  
Calcium Phosphate ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Sem Analysis ◽  
Strength Distribution ◽  
Saturation Level ◽  
Content Type ◽  
Core Saturation ◽  
Size And Morphology ◽  
Binder Saturation

Purpose – This paper aims to study the influence of the binder saturation level on the accuracy and on the mechanical properties of three-dimensional (3D)-printed scaffolds for bone tissue engineering. Design/methodology/approach – To study the influence of the liquid binder volume on the models accuracy, two quality test plates with different macropore sizes were designed and produced. For the mechanical and physical characterisation, cylindrical specimens were used. The models were printed using a calcium phosphate powder, which was characterised in terms of composition, particle size and morphology, by X-ray diffraction (XRD), laser diffraction and Scanning electron microscopy (SEM) analysis. The sample’s physical characterisation was made using the Archimedes method (porosity), SEM, micro-computer tomography (CT) and digital scan techniques, while the mechanical characterisation was performed by means of uniaxial compressive tests. Strength distribution was analysed using a statistical Weibull approach, and the dependence of the compressive strength on the porosity was discussed. Findings – The saturation level is determinant for the structural characteristics, accuracy and strength the models produced by three-dimensional printing (3DP). Samples printed with the highest saturation showed higher compressive strengths (24 MPa), which are over the human trabecular bone. The models printed with lower saturations presented the highest accuracy and pore interconnectivity. Originality/value – This study allowed to acquire important knowledge concerning the effects of shell/core saturation on the overall performance of the 3DP. With this information it is possible to devise scaffolds with the required properties for bone scaffold engineering.

Archiving experience: an exploration of the challenges of preserving virtual reality

2020 ◽  
Vol 30 (2) ◽  
pp. 253-274
Author(s):  
Zack Lischer-Katz
Keyword(s):  
Virtual Reality ◽  
Multiple Scales ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Central Element ◽  
Theory And Practice ◽  
Archival Theory ◽  
Content Type ◽  
Archival Practice ◽  
The Impact

Purpose This paper aims to explore the opportunities and challenges that immersive virtual reality (VR) technologies pose for archival theory and practice. Design/methodology/approach This conceptual paper reviews research on VR adoption in information institutions and the preservation challenges of VR to identify ways in which VR has the potential to disrupt existing archival theory and practice. Findings Existing archival approaches are found to be disrupted by the multi-layered structural characteristics of VR, the part–whole relationships between the technological elements of VR environments and the three-dimensional content they contain and the immersive, experiential nature of VR experiences. This paper argues that drawing on perspectives from phenomenology and digital materiality is helpful for addressing the preservation challenges of VR. Research limitations/implications The findings extend conceptualizations of preservation by identifying gaps in existing preservation approaches to VR and stressing the importance of “experience” as a central element of archival practice and by emphasizing the embodied dimensions of interpreting archival records and the multiple scales of materiality that archival researchers and practitioners should consider to preserve VR. Practical implications These findings provide guidance for digital curators and preservationists by outlining the current thinking on VR preservation and the impact of VR on digital preservation strategies. Originality/value This paper gives new insight into VR as an emerging area of concern to digital curation and preservation and expands archival thinking with new conceptualizations that disrupt existing paradigms.

Print Parameters Influence on Parts' Quality and Calibration with 3DP-Part I: Print Parameters Influence on Parts’ Surface Topography

2011 ◽  
Vol 399-401 ◽  
pp. 1639-1645 ◽  
Author(s):  
Shu Juan Li ◽  
Shan Cao
Keyword(s):  
Surface Topography ◽  
Layer Thickness ◽  
Three Dimensional ◽  
Saturation Level ◽  
Powder Layer ◽  
Free Form ◽  
High Productivity ◽  
Experiment Platform ◽  
Part Surface ◽  
Binder Saturation

As an important Solid Free Form Fabrication (SFF) technology, three-dimensional printing (3DP) has become popular in applications due to its properties of rapid prototyping, no pollution, and high productivity. Based on the experiment platform of ZP310, this paper investigates that powder layer thickness and blinder saturation level for different location of parts placement have effect on the part surface topography and forming accuracy, the location of parts placement includes right, middle and left, respectively, which represents the different face contact to the bottom of manufacturing box. The experiments show that: when the left of part is placed to contact to the bottom of manufacturing box, the powder layer thickness is 0.1 mm and the binder saturation level is 70%, the best surface topography can be obtained.

scholarly journals Fusion of an Oligopeptide to the N Terminus of an Alkaline α-Amylase from Alkalimonas amylolytica Simultaneously Improves the Enzyme's Catalytic Efficiency, Thermal Stability, and Resistance to Oxidation

2013 ◽  
Vol 79 (9) ◽  
pp. 3049-3058 ◽  
Author(s):  
Haiquan Yang ◽  
Xinyao Lu ◽  
Long Liu ◽  
Jianghua Li ◽  
Hyun-dong Shin ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Specific Activity ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Catalytic Efficiency ◽  
Content Type ◽  
Resistance To Oxidation ◽  
Catalytic Constant ◽  
N Terminus ◽  
Ph Range

ABSTRACTIn this study, we constructed and expressed six fusion proteins composed of oligopeptides attached to the N terminus of the alkaline α-amylase (AmyK) fromAlkalimonas amylolytica. The oligopeptides had various effects on the functional and structural characteristics of AmyK. AmyK-p1, the fusion protein containing peptide 1 (AEAEAKAKAEAEAKAK), exhibited improved specific activity, catalytic efficiency, alkaline stability, thermal stability, and oxidative stability compared with AmyK. Compared with AmyK, the specific activity and catalytic constant (kcat) of AmyK-p1 were increased by 4.1-fold and 3.5-fold, respectively. The following properties were also improved in AmyK-p1 compared with AmyK:kcat/Kmincreased from 1.8 liter/(g·min) to 9.7 liter/(g·min), stable pH range was extended from 7.0 to 11.0 to 7.0 to 12.0, optimal temperature increased from 50°C to 55°C, and the half-life at 60°C increased by ∼2-fold. Moreover, AmyK-p1 showed improved resistance to oxidation and retained 54% of its activity after incubation with H2O2, compared with 20% activity retained by AmyK. Finally, AmyK-p1 was more compatible than AmyK with the commercial solid detergents tested. The mechanisms responsible for these changes were analyzed by comparing the three-dimensional (3-D) structural models of AmyK and AmyK-p1. The significantly enhanced catalytic efficiency and stability of AmyK-p1 suggests its potential as a detergent ingredient. In addition, the oligopeptide fusion strategy described here may be useful for improving the catalytic efficiency and stability of other industrial enzymes.

SEM analysis of the change in the reaction rates with deposit structures in the copper-iron cementation system

1978 ◽  
Vol 36 (1) ◽  
pp. 456-457
Author(s):  
V. Annamalai ◽  
L.E. Murr
Keyword(s):  
Structural Characteristics ◽  
Secondary Electron Emission ◽  
Copper Deposit ◽  
Reaction Rates ◽  
Sem Analysis ◽  
Experimental Conditions ◽  
Major Drawback ◽  
Emission Mode ◽  
Scrap Iron ◽  
Image Position

Economical recovery of copper metal from leach liquors has been carried out by the simple process of cementing copper onto a suitable substrate metal, such as scrap-iron, since the 16th century. The process has, however, a major drawback of consuming more iron than stoichiometrically needed by the reaction.Therefore, many research groups started looking into the process more closely. Though it is accepted that the structural characteristics of the resultant copper deposit cause changes in reaction rates for various experimental conditions, not many systems have been systematically investigated. This paper examines the deposit structures and the kinetic data, and explains the correlations between them.A simple cementation cell along with rotating discs of pure iron (99.9%) were employed in this study to obtain the kinetic results The resultant copper deposits were studied in a Hitachi Perkin-Elmer HHS-2R scanning electron microscope operated at 25kV in the secondary electron emission mode.

Stereotactic radiosurgery versus stereotactic radiotherapy for patients with vestibular schwannoma: a Leksell Gamma Knife Society 2000 debate

2000 ◽  
Vol 93 (supplement_3) ◽  
pp. 90-92 ◽  
Author(s):  
Mark E. Linskey
Keyword(s):  
Gamma Knife ◽  
Stereotactic Radiotherapy ◽  
Three Dimensional ◽  
Late Recurrence ◽  
Vestibular Schwannomas ◽  
Tumor Control ◽  
Complication Rates ◽  
Content Type ◽  
Single Fraction ◽  
Fine Print

✓ By definition, the term “radiosurgery” refers to the delivery of a therapeutic radiation dose in a single fraction, not simply the use of stereotaxy. Multiple-fraction delivery is better termed “stereotactic radiotherapy.” There are compelling radiobiological principles supporting the biological superiority of single-fraction radiation for achieving an optimal therapeutic response for the slowly proliferating, late-responding, tissue of a schwannoma. It is axiomatic that complication avoidance requires precise three-dimensional conformality between treatment and tumor volumes. This degree of conformality can only be achieved through complex multiisocenter planning. Alternative radiosurgery devices are generally limited to delivering one to four isocenters in a single treatment session. Although they can reproduce dose plans similar in conformality to early gamma knife dose plans by using a similar number of isocenters, they cannot reproduce the conformality of modern gamma knife plans based on magnetic resonance image—targeted localization and five to 30 isocenters. A disturbing trend is developing in which institutions without nongamma knife radiosurgery (GKS) centers are championing and/or shifting to hypofractionated stereotactic radiotherapy for vestibular schwannomas. This trend appears to be driven by a desire to reduce complication rates to compete with modern GKS results by using complex multiisocenter planning. Aggressive advertising and marketing from some of these centers even paradoxically suggests biological superiority of hypofractionation approaches over single-dose radiosurgery for vestibular schwannomas. At the same time these centers continue to use the term radiosurgery to describe their hypofractionated radiotherapy approach in an apparent effort to benefit from a GKS “halo effect.” It must be reemphasized that as neurosurgeons our primary duty is to achieve permanent tumor control for our patients and not to eliminate complications at the expense of potential late recurrence. The answer to minimizing complications while maintaining maximum tumor control is improved conformality of radiosurgery dose planning and not resorting to homeopathic radiosurgery doses or hypofractionation radiotherapy schemes.

scholarly journals Biphasic Calcium Phosphate Biomaterials: Stem Cell-Derived Osteoinduction or In Vivo Osteoconduction? Novel Insights in Maxillary Sinus Augmentation by Advanced Imaging

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2159
Author(s):  
Giovanna Iezzi ◽  
Antonio Scarano ◽  
Luca Valbonetti ◽  
Serena Mazzoni ◽  
Michele Furlani ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Maxillary Sinus ◽  
Biphasic Calcium Phosphate ◽  
Calcium Phosphates ◽  
Three Dimensional ◽  
Sinus Augmentation ◽  
Native Bone ◽  
Maxillary Sinus Augmentation ◽  
Posterior Maxilla

Maxillary sinus augmentation is often necessary prior to implantology procedure, in particular in cases of atrophic posterior maxilla. In this context, bone substitute biomaterials made of biphasic calcium phosphates, produced by three-dimensional additive manufacturing were shown to be highly biocompatible with an efficient osteoconductivity, especially when combined with cell-based tissue engineering. Thus, in the present research, osteoinduction and osteoconduction properties of biphasic calcium-phosphate constructs made by direct rapid prototyping and engineered with ovine-derived amniotic epithelial cells or amniotic fluid cells were evaluated. More in details, this preclinical study was performed using adult sheep targeted to receive scaffold alone (CTR), oAFSMC, or oAEC engineered constructs. The grafted sinuses were explanted at 90 days and a cross-linked experimental approach based on Synchrotron Radiation microCT and histology analysis was performed on the complete set of samples. The study, performed taking into account the distance from native surrounding bone, demonstrated that no significant differences occurred in bone regeneration between oAEC-, oAFMSC-cultured, and Ctr samples and that there was a predominant action of the osteoconduction versus the stem cells osteo-induction. Indeed, it was proven that the newly formed bone amount and distribution decreased from the side of contact scaffold/native bone toward the bulk of the scaffold itself, with almost constant values of morphometric descriptors in volumes more than 1 mm from the border.

scholarly journals Coupled Fluid–Solid Numerical Simulation for Flow Field Characteristics and Supporting Performance of Flexible Support Cylindrical Gas Film Seal

Aerospace ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 97
Author(s):  
Junfeng Sun ◽  
Meihong Liu ◽  
Zhen Xu ◽  
Taohong Liao ◽  
Xiangping Hu ◽  
...  
Keyword(s):  
Flow Field ◽  
Film Thickness ◽  
Fluid Dynamic ◽  
Structural Characteristics ◽  
Structural Parameters ◽  
Equivalent Stress ◽  
Three Dimensional ◽  
High Rotational Speed ◽  
Flexible Support ◽  
Flow Field Characteristics

A new type of cylindrical gas film seal (CGFS) with a flexible support is proposed according to the working characteristics of the fluid dynamic seal in high-rotational-speed fluid machinery, such as aero-engines and centrifuges. Compared with the CGFS without a flexible support, the CGFS with flexible support presents stronger radial floating characteristics since it absorbs vibration and reduces thermal deformation of the rotor system. Combined with the structural characteristics of a film seal, an analytical model of CGFS with a flexible wave foil is established. Based on the fluid-structure coupling analysis method, the three-dimensional flow field of a straight-groove CGFS model is simulated to study the effects of operating and structural parameters on the steady-state characteristics and the effects of gas film thickness, eccentricity, and the number of wave foils on the equivalent stress of the flexible support. Simulation results show that the film stiffness increases significantly when the depth of groove increases. When the gas film thickness increases, the average equivalent stress of the flexible support first decreases and then stabilizes. Furthermore, the number of wave foils affects the average foils thickness. Therefore, when selecting the number of wave foils, the support stiffness and buffer capacity should be considered simultaneously.

scholarly journals Agent-Based Modeling Demonstrates How Local Chemotactic Behavior Can Shape Biofilm Architecture

mSphere ◽  
2019 ◽  
Vol 4 (3) ◽  
Author(s):  
Emily G. Sweeney ◽  
Andrew Nishida ◽  
Alexandra Weston ◽  
Maria S. Bañuelos ◽  
Kristin Potter ◽  
...  
Keyword(s):  
Helicobacter Pylori ◽  
Three Dimensional ◽  
Structural Features ◽  
Agent Based Modeling ◽  
Emergent Properties ◽  
Cellular Interactions ◽  
Biofilm Growth ◽  
Content Type ◽  
Agent Based ◽  
H Pylori

ABSTRACTBacteria are often found living in aggregated multicellular communities known as biofilms. Biofilms are three-dimensional structures that confer distinct physical and biological properties to the collective of cells living within them. We used agent-based modeling to explore whether local cellular interactions were sufficient to give rise to global structural features of biofilms. Specifically, we asked whether chemorepulsion from a self-produced quorum-sensing molecule, autoinducer-2 (AI-2), was sufficient to recapitulate biofilm growth and cellular organization observed for biofilms ofHelicobacter pylori, a common bacterial resident of human stomachs. To carry out this modeling, we modified an existing platform, Individual-based Dynamics of Microbial Communities Simulator (iDynoMiCS), to incorporate three-dimensional chemotaxis, planktonic cells that could join or leave the biofilm structure, and cellular production of AI-2. We simulated biofilm growth of previously characterizedH. pyloristrains with various AI-2 production and sensing capacities. Using biologically plausible parameters, we were able to recapitulate both the variation in biofilm mass and cellular distributions observed with these strains. Specifically, the strains that were competent to chemotax away from AI-2 produced smaller and more heterogeneously spaced biofilms, whereas the AI-2 chemotaxis-defective strains produced larger and more homogeneously spaced biofilms. The model also provided new insights into the cellular demographics contributing to the biofilm patterning of each strain. Our analysis supports the idea that cellular interactions at small spatial and temporal scales are sufficient to give rise to larger-scale emergent properties of biofilms.IMPORTANCEMost bacteria exist in aggregated, three-dimensional structures called biofilms. Although biofilms play important ecological roles in natural and engineered settings, they can also pose societal problems, for example, when they grow in plumbing systems or on medical implants. Understanding the processes that promote the growth and disassembly of biofilms could lead to better strategies to manage these structures. We had previously shown thatHelicobacter pyloribacteria are repulsed by high concentrations of a self-produced molecule, AI-2, and thatH. pylorimutants deficient in AI-2 sensing form larger and more homogeneously spaced biofilms. Here, we used computer simulations of biofilm formation to show that localH. pyloribehavior of repulsion from high AI-2 could explain the overall architecture ofH. pyloribiofilms. Our findings demonstrate that it is possible to change global biofilm organization by manipulating local cell behaviors, which suggests that simple strategies targeting cells at local scales could be useful for controlling biofilms in industrial and medical settings.

A biomimetic 3D airflow sensor made of an array of two piezoelectric metal-core fibers

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 312-321 ◽  
Author(s):  
Yixiang Bian ◽  
Can He ◽  
Kaixuan Sun ◽  
Longchao Dai ◽  
Hui Shen ◽  
...  
Keyword(s):  
Design Methodology ◽  
Spherical Surface ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Piezoceramic Cylinder ◽  
Metal Core ◽  
Content Type ◽  
3D Space ◽  
Highly Sensitive ◽  
Airflow Sensor

Purpose The purpose of this paper is to design and fabricate a three-dimensional (3D) bionic airflow sensing array made of two multi-electrode piezoelectric metal-core fibers (MPMFs), inspired by the structure of a cricket’s highly sensitive airflow receptor (consisting of two cerci). Design/methodology/approach A metal core was positioned at the center of an MPMF and surrounded by a hollow piezoceramic cylinder. Four thin metal films were spray-coated symmetrically on the surface of the fiber that could be used as two pairs of sensor electrodes. Findings In 3D space, four output signals of the two MPMFs arrays can form three “8”-shaped spheres. Similarly, the sensing signals for the same airflow are located on a spherical surface. Originality/value Two MPMF arrays are sufficient to detect the speed and direction of airflow in all three dimensions.

Sign in / Sign up

Export Citation Format

Share Document