scholarly journals Sensitivity of Age Estimation Systems to Demographic Factors and Image Quality: Achievements and Challenges

Author(s):  
Ali Akbari ◽  
Muhammad Awais ◽  
Josef Kittler
Author(s):  
Peter Ajonghakoh Foabeh ◽  
Henry Fonji Achaleke

This study aims to measure the attitudes and perceptions of grocery shoppers towards Big C and Tesco Lotus among Thais and non-Thais. In achieving this, the importance and satisfaction of shoppers’ grocery store choice is examined. The product and service outlets of these two supermarket giants may look identical, but the satisfaction and importance attributed by shoppers may differ considerably. Results from the survey (questionnaire) of 180 respondents show that store image, quality of service, size and location, as well as price and promotion are positively related to satisfaction of shoppers’ choice of supermarkets. In addition, price and promotion, parking, and the environment positively affect the importance of shoppers’ choice of supermarkets. No valid relationship was found between either satisfaction or importance and demographic factors (gender, age, occupation, and ethnicity).  


Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.


Author(s):  
K. Shibatomi ◽  
T. Yamanoto ◽  
H. Koike

In the observation of a thick specimen by means of a transmission electron microscope, the intensity of electrons passing through the objective lens aperture is greatly reduced. So that the image is almost invisible. In addition to this fact, it have been reported that a chromatic aberration causes the deterioration of the image contrast rather than that of the resolution. The scanning electron microscope is, however, capable of electrically amplifying the signal of the decreasing intensity, and also free from a chromatic aberration so that the deterioration of the image contrast due to the aberration can be prevented. The electrical improvement of the image quality can be carried out by using the fascionating features of the SEM, that is, the amplification of a weak in-put signal forming the image and the descriminating action of the heigh level signal of the background. This paper reports some of the experimental results about the thickness dependence of the observability and quality of the image in the case of the transmission SEM.


Author(s):  
N.J. Tighe ◽  
H.M. Flower ◽  
P.R. Swann

A differentially pumped environmental cell has been developed for use in the AEI EM7 million volt microscope. In the initial version the column of gas traversed by the beam was 5.5mm. This permited inclusion of a tilting hot stage in the cell for investigating high temperature gas-specimen reactions. In order to examine specimens in the wet state it was found that a pressure of approximately 400 torr of water saturated helium was needed around the specimen to prevent dehydration. Inelastic scattering by the water resulted in a sharp loss of image quality. Therefore a modified cell with an ‘airgap’ of only 1.5mm has been constructed. The shorter electron path through the gas permits examination of specimens at the necessary pressure of moist helium; the specimen can still be tilted about the side entry rod axis by ±7°C to obtain stereopairs.


Author(s):  
J. E. Johnson

In the early years of biological electron microscopy, scientists had their hands full attempting to describe the cellular microcosm that was suddenly before them on the fluorescent screen. Mitochondria, Golgi, endoplasmic reticulum, and other myriad organelles were being examined, micrographed, and documented in the literature. A major problem of that early period was the development of methods to cut sections thin enough to study under the electron beam. A microtome designed in 1943 moved the specimen toward a rotary “Cyclone” knife revolving at 12,500 RPM, or 1000 times as fast as an ordinary microtome. It was claimed that no embedding medium was necessary or that soft embedding media could be used. Collecting the sections thus cut sounded a little precarious: “The 0.1 micron sections cut with the high speed knife fly out at a tangent and are dispersed in the air. They may be collected... on... screens held near the knife“.


Author(s):  
C J R Sheppard

The confocal microscope is now widely used in both biomedical and industrial applications for imaging, in three dimensions, objects with appreciable depth. There are now a range of different microscopes on the market, which have adopted a variety of different designs. The aim of this paper is to explore the effects on imaging performance of design parameters including the method of scanning, the type of detector, and the size and shape of the confocal aperture.It is becoming apparent that there is no such thing as an ideal confocal microscope: all systems have limitations and the best compromise depends on what the microscope is used for and how it is used. The most important compromise at present is between image quality and speed of scanning, which is particularly apparent when imaging with very weak signals. If great speed is not of importance, then the fundamental limitation for fluorescence imaging is the detection of sufficient numbers of photons before the fluorochrome bleaches.


2007 ◽  
Vol 6 (1) ◽  
pp. 68-68
Author(s):  
A RELBO ◽  
I GROV ◽  
S ARORA ◽  
A ANDREASSEN ◽  
E GUDE ◽  
...  

VASA ◽  
2014 ◽  
Vol 43 (4) ◽  
pp. 278-283 ◽  
Author(s):  
Qian Chen ◽  
Rongfeng Qi ◽  
Xiaoqing Cheng ◽  
Changsheng Zhou ◽  
Song Luo ◽  
...  

Background: To evaluate the value of time-of-flight MR angiography (TOF MRA) for the assessment of extracranial-intracranial (EC-IC) bypass in Moyamoya disease in comparison with computed tomography angiography (CTA). Patients and methods: A consecutive series of 23 patients with Moyamoya disease were analyzed retrospectively. Twenty three patients underwent 25 procedures of extracranial-intracranial bypass. Cranial CTA was performed within one week after the surgery to assess bypass patency. Then TOF MRA was scanned within 24 h after CTA on a 3T MRI system. Using 5-point scales (0 = poor to 4 = excellent), two radiologists rated the image quality and vessel integrity of bypass for three segments (extracranial, trepanation, intracranial). Results: Image quality was high in both CTA and TOF MRA (mean quality score 3.84 ± 0.37 and 3.8 ± 0.41), without statistical difference (p = 0.66). Mean scores of TOF MRA with respect to bypass visualization were higher than CTA in the intracranial segment (p = 0.026). No significant difference of bypass visualization regarding the extracranial and trepanation segments was found between TOF MRA and CTA (p = 0.66 and p = 0.34, respectively). For the trepanation segment, TOF MRA showed pseudo lesions in 2 of all 25 cases. Conclusions: 3T TOF MRA, a non-contrast technique not exposing the patients to radiation, proved to be at least equal to CTA for the assessment of EC-IC bypass, and even superior to CTA with respect to the intracranial segment. In addition, readers should be aware of a potential overestimation showing focal pseudo lesions of the bypass at the trepanation segment in TOF MRA.


Crisis ◽  
2019 ◽  
Vol 40 (5) ◽  
pp. 326-332
Author(s):  
Ivonne Andrea Florez ◽  
Devon LoParo ◽  
Nakia Valentine ◽  
Dorian A. Lamis

Abstract. Background: Early identification and appropriate referral services are priorities to prevent suicide. Aims: The aim of this study was to describe patterns of identification and referrals among three behavioral health centers and determine whether youth demographic factors and type of training received by providers were associated with identification and referral patterns. Method: The Early Identification Referral Forms were used to gather the data of interest among 820 youth aged 10–24 years who were screened for suicide risk (females = 53.8%). Descriptive statistics and binary logistic regressions were conducted to examine significant associations. Results: Significant associations between gender, race, and age and screening positive for suicide were found. Age and race were significantly associated with different patterns of referrals and/or services received by youths. For providers, being trained in Counseling on Access to Lethal Means was positively associated with number of referrals to inpatient services. Limitations: The correlational nature of the study and lack of information about suicide risk and comorbidity of psychiatric symptoms limit the implications of the findings. Conclusion: The results highlight the importance of considering demographic factors when identifying and referring youth at risk to ensure standard yet culturally appropriate procedures to prevent suicide.


Sign in / Sign up

Export Citation Format

Share Document