scholarly journals COMBUSTION PERFORMANCE OF SYNGAS FROM PALM KERNEL SHELL IN A GAS BURNER

2019 ◽  
Vol 81 (6) ◽  
Author(s):  
Asmadib Yusoff @ Adnan ◽  
Muhammad Roslan Rahim ◽  
Mohammad Nazri Mohd. Jaafar ◽  
Norazila Othman ◽  
Mohd Shuisma Mohd Ismail ◽  
...  
Keyword(s):  
Alternative Energy ◽  
Energy Content ◽  
Palm Kernel ◽  
High Energy ◽  
Flame Length ◽  
Palm Kernel Shell ◽  
Downdraft Gasifier ◽  
Combustion Performance ◽  
Rich Condition ◽  
Gas Burner

Insufficient and various environmental issues of fossil fuels as the current world dominated energy is now becoming a serious global issue. The rapidly increasing demand for alternative energy sources has contributed to the steady growth of renewable energy. Owing to the fact of the abundant presence of palm kernel shell (PKS) as one of palm biomass wastes in South East Asia region, this paper investigates syngas produced from gasified PKS. The investigation is regarding its composition and combustion performance in a gas burner system. It covers emissions analysis, temperature profile and flame length. The produced syngas from downdraft gasifier was burned in the combustion chamber in air-rich and fuel-rich combustion conditions.  From the experiment, the results showed that the oxidation zone temperature of above 750°C for the downdraft gasifier is suitable for producing syngas. Produced syngas can be classified as pure-carbon monoxide (CO) syngas due to 94.9% CO content with no hydrogen (H2) content and low heating value (LHV) of 10.7 MJ/kg. The wall temperature profiles for burnt syngas produced via downdraft gasification was higher with longer pattern at fuel-rich condition, which signified higher energy of syngas produced from downdraft gasifier compared to fluidised bed gasifier.  The associated flame length was also longer at fuel-rich condition. Produced emission of 56 ppm NOX, 37 ppm CO and 1 ppm SO2 can still be considered as acceptable to human.  It can be concluded that syngas produced from PKS shown a high potential to serve as an alternative source of energy due to its high energy content.

Study on Combustion Performance of Palm Oil Biodiesel Blend

2014 ◽  
Vol 69 (6) ◽  
Author(s):  
Mohammad Nazri Mohd Ja’afar ◽  
Wan Zaidi Wan Omar ◽  
Muhammad Roslan Rahim ◽  
Ismail Azmi ◽  
Mohd Hisyam Abdullah
Keyword(s):  
Temperature Profile ◽  
Palm Oil ◽  
Alternative Energy ◽  
Energy Content ◽  
Combustion Process ◽  
High Energy ◽  
Flame Length ◽  
Gaseous Emissions ◽  
Alternative Energy Sources ◽  
Biodiesel Blend

The world today is adversely affected by the rapid growth of various industries which use fossil diesel fuel as a main source to power their respective industries. As such, these natural resources are increasingly reduced thus resulting in price increments. A study was conducted to find a way to develop alternative energy sources that are environmentally friendly and renewable. One of the potential sources of energy is palm oil. Therefore, this project is intended to look at the effect of combustion of biodiesel from palm oil which is carotino palm oil. This project will include the study of the physical characteristics of the fuel such as density, viscosity, and surface tension. In terms of combustion, it includes emissions during the combustion process, the temperature profile and the flame length. Several carotino biodiesel blends have been made, i.e. B0, B10, B20, B30, B40, B50, and B100 whereby each blend will be burned in the combustion chamber in three conditions which are at equivalent ratios of 0.6, 1, and 1.4. Temperature profile, gas emissions, and flame length for every combustion test will be recorded. An overall view from this test shows that B10 biodiesel blend shows a high potential to replace diesel due to its high energy content although the gaseous emissions are not the lowest.

Combustion of Apple Juice Wastes in a Cyclone Combustor for Thermal Energy Generation (ES2009-90152)

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Elaine Virmond ◽  
Robson L. Schacker ◽  
Waldir Albrecht ◽  
Christine A. Althoff ◽  
Maurício de Souza ◽  
...  
Keyword(s):  
Energy Source ◽  
Alternative Energy ◽  
Apple Juice ◽  
Energy Content ◽  
High Energy ◽  
Industrial Sector ◽  
Nox Emission ◽  
Unburned Carbon ◽  
Cyclone Combustor ◽  
Combustion Tests

The solid waste generated from the apple juice industry (apple bagasse (AB)) was characterized as a fuel, and the potential for its utilization as an alternative energy source was assessed through its combustion in a pilot scale cyclone combustor. A comparative evaluation of the AB and sawdust (SD) properties, as well as of the emissions during the combustion tests, was performed. The high energy content of AB (lower heating value (LHV) equal to 21.09 MJ kg−1), dry and ash-free (daf) basis, which is 26.9% higher than the LHV of SD (16.62 MJ kg−1, daf), and combined with the high volatile matter content (85.36 wt %, daf) improve the ignition and burning of the solids. The emissions of CO, SO2, and NOx and the total organic carbon (TOC) were compared with guideline limits established by Brazilian and international legislation. AB generated much lower CO than sawdust in spite of almost half of excess air levels (13% compared with 26%) and met even the stringent limit of the German regulation for waste incineration. The unburned carbon percentages found in the ash resulted from SD and AB combustion tests were 0.24% and 0.96% in weight, respectively. The absence of sulfur in AB composition represents an advantage with nondetectable SO2. The average level of NOx emission with SD combustion was 242 mg N m−3 and met all the regulation limits. The average NOx emission with AB combustion though was 642 mg N m−3 and met the U.S. EPA regulation but was marginally higher than the Brazilian norm by 15%. TOC concentrations remained below the limits considered even though the TOC level was higher in the AB combustion test. Polycyclic aromatic hydrocarbons (PAH) were not detected or were under the quantification limit of the equipment used in their analysis. Comparing the properties, the burning profiles of SD and AB, and the emissions from their combustion tests, it can be stated that the waste originating from the apple juice industry is suitable for direct combustion, constituting a renewable energy source for this industrial sector.

scholarly journals BIOFUELS AS PROMISING FUELS

2015 ◽  
Vol 6 (2) ◽  
Author(s):  
Vladan Mićić ◽  
Pero Dugić ◽  
Zoran Petrović ◽  
Milorad Tomić
Keyword(s):  
Energy Source ◽  
Renewable Resources ◽  
Alternative Energy ◽  
Fossil Fuels ◽  
Energy Content ◽  
Cost Effective ◽  
High Energy ◽  
Economic Benefits ◽  
Promising Alternative ◽  
Technical Issues

The use of fossil fuels results in global warming and pollution. In comparison with fossil fuels biofuels represent an eco-friendly, biodegradable, sustainable, cost-competitive and promising alternative energy source. They contain high energy content and do not contribute to greenhouse effect. Therefore, using cheap or renewable resources as the feedstock for biofuels production has a great potential in terms of a major contribution to future energy supply. The production and use of biofuels is already well established and a further promotion of these fuels such as lipid biofuels (bioethanol, pure plant oils and biodiesel) and gas biofuels (biomethane, biohydrogen) mainly depends on non-technical issues, such as policies and cost–effectiveness. Biofuels will definitely stay for the foreseeable future and still can continue to provide the earth and the human population with a relatively clean source of energy with several benefits such as economic benefits of providing employment and health benefits of reduced carbon emissions, leading to cleaner air. With increasing sophistication of technology and intense research and development done, one can safely infer that biofuel will become more appealing and applicable for use on a globally commercial level. As such, biofuel is acknowledged as the Earth’s future energy source. Until a newer and cleaner energy source is discovered, scientists will definitely persist in researching and enhancing biofuels to make them more cost-effective, while still being environmentally friendly.

The technical pre-feasibility to use briquettes made from wood and agricultural waste for gasification in a downdraft gasifier for electricity generation

2011 ◽  
Vol 22 (4) ◽  
pp. 2-7 ◽  
Author(s):  
Pholoso Malatji ◽  
Ntshengedzeni Sampson Mamphweli ◽  
Martina Meincken
Keyword(s):  
Bulk Density ◽  
Electricity Generation ◽  
Energy Content ◽  
Agricultural Waste ◽  
Fixed Bed ◽  
High Energy ◽  
Residual Moisture ◽  
Waste Products ◽  
Downdraft Gasifier ◽  
Thermochemical Processes

Biomass can be converted to energy through various thermochemical and biological processes. Gasification is one of the thermochemical processes that has recently gained popularity, because it achieves higher conversion efficiencies than, for example, incinerators, boilers or furnaces. Fixed-bed downdraft gasifiers are preferred for electricity generation, because they produce very little tar, but on the other hand, they are limited with regard to biomass properties, such as particle size, bulk density and moisture content. Biomass material with a heterogeneous size is usually processed into pellets or briquettes, which have to be mechanically strong enough to be handled. Cohesive strength is provided by residual moisture and lignin present in most biomass. However, the briquetting process becomes more complicated if one wants to add agricultural waste products that do not necessarily contain lignin as binders. The aim of this work was to process wood chips, grape skins and chicken litter into briquettes that are mechanically stable and have a sufficiently high energy content, as well as adequate bulk density for gasification. The performance of these briquettes in a downdraft gasifier was simulated with a program developed for wood, which was modified to optimise the briquette yield. The results showed a gasification performance comparable to solid pine wood, implying that the blended briquettes could be used as fuel for a downdraft biomass gasifier. Unfortunately, the briquettes proved too instable to experimentally verify the performance in a gasifier. This paper describes the properties of the briquettes as well as the gasification simulation results.

Performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier

2016 ◽  
Vol 13 (5) ◽  
pp. 513-520 ◽  
Author(s):  
Muhammad Afif Ariffin ◽  
Wan Mohd Faizal Wan Mahmood ◽  
Ramizi Mohamed ◽  
Mohd Tusirin Mohd Nor
Keyword(s):  
Oil Palm ◽  
Palm Kernel ◽  
Palm Kernel Shell ◽  
Medium Scale ◽  
Downdraft Gasifier

scholarly journals CARACTERIZAÇÃO FÍSICA, QUÍMICA E MÊCANICA DE PELLETS DE BAGAÇO DE CANA-DE-AÇÚCAR

2020 ◽  
Vol 35 (1) ◽  
pp. 38-45
Author(s):  
Ana Carolina Lopes Amaral Costa ◽  
Humberto de Jesus Eufrade Junior ◽  
Emanuel Rangel Spadim ◽  
José Mauro Santana Da Silva ◽  
Saulo Philipe Sebastião Guerra
Keyword(s):  
Alternative Energy ◽  
Energy Content ◽  
High Energy ◽  
Sao Paulo ◽  
Raw Material ◽  
São Paulo ◽  
Alternative Source ◽  
Heating Value ◽  
Physical Density ◽  
E Mail

CARACTERIZAÇÃO FÍSICA, QUÍMICA E MÊCANICA DE PELLETS DE BAGAÇO DE CANA-DE- AÇÚCAR   ANA CAROLINA LOPES AMARAL COSTA1, HUMBERTO DE JESUS EUFRADE JUNIOR2, EMANUEL RANGEL SPADIM3, JOSÉ MAURO SANTANA DA SILVA4, SAULO PHILIPE SEBASTIÃO GUERRA5   1 Departamento de Engenharia Rural e Socioeconomia, Faculdade de Ciências Agronômicas (FCA) – Universidade Estadual Paulista (UNESP), Avenida Universitária - 3780, CEP: 18610-034, Botucatu, São Paulo, Brasil. E-mail:  [email protected] 2 Departamento de Engenharia Rural e Socioeconomia, Faculdade de Ciências Agronômicas (FCA) – Universidade Estadual Paulista (UNESP), Avenida Universitária - 3780, CEP: 18610-034, Botucatu, São Paulo, Brasil. E-mail:  [email protected] 3 Departamento de Engenharia Rural e Socioeconomia, Faculdade de Ciências Agronômicas (FCA) – Universidade Estadual Paulista (UNESP), Avenida Universitária - 3780, CEP: 18610-034, Botucatu, São Paulo, Brasil. E-mail:  [email protected] 4 Departamento de Ciências Ambientais. Universidade Federal de São Carlos (UFSCar), Rod. João Leme dos Santos, km 110, CEP: 18052.780.  Bairro Itinga, Sorocaba, São Paulo, Brasil. E-mail: [email protected] 5 Departamento de Engenharia Rural e Socioeconomia, Faculdade de Ciências Agronômicas (FCA) – Universidade Estadual Paulista (UNESP), Avenida Universitária - 3780, CEP: 18610-034, Botucatu, São Paulo, Brasil. E-mail:  [email protected]   RESUMO: A bioenergia é uma das alternativas para diminuir a dependência de combustíveis fósseis da matriz energética mundial. Os pellets surgem como uma opção interessante para a produção de biomassa e o bagaço de cana-de-açúcar, também, pode ser aproveitado na forma de pellets. Pellets é o nome dado ao produto resultante do processo de compressão aplicada a uma matéria prima, sendo que em muitos casos essa matéria prima é preparada previamente através do processo de secagem e moagem. O objetivo da pesquisa foi realizar a análise das propriedades: físicas - densidade, umidade, granulometria, diâmetro e comprimento, químicas – teor de carbono fixo, material volátil e cinzas, mecânicas -  durabilidade mecânica e o poder calorífico superior. Foram analisadas amostras de pellets provenientes de fazendas do Estado de São Paulo. As análises foram conduzidas no Laboratório Agroflorestal de Biomassa e Bioenergia (LABB/IPBEN) pertencente à Faculdade de Ciências Agronômicas (FCA/UNESP), sendo esta biomassa uma fonte alternativa de energia com alto teor energético e baixa umidade   Palavras-chave: poder calorífico superior, biomassa, fontes alternativas de energia.   PHYSICAL, CHEMICAL AND MECHANICAL CHARACTERIZATION OF SUGARCANE BAGASSE PELLETS   ABSTRACT: Bioenergy is one of the alternatives to reduce the dependence on fossil fuels in the world energy matrix. Pellets appear like an attractive option for the production of biomass, and sugarcane can be used in the form of pellets. Pellets are the name given to the product that affects the process of applying a raw material, and in many cases, this material is prepared for the drying and grinding process. The objective of the research was to carry out an analysis of the properties: physical - density, granulometry, diameter and length, chemical - fixed carbon content, volatile matter and ashes, mechanics - mechanical use, and higher heating value. Samples of pellets from farms in the State of São Paulo were analyzed. Analyzes were conducted at the Agroforestry Laboratory of Biomass and Bioenergy (LABB / IPBEN) belonging to the Faculty of Agronomic Sciences (FCA / UNESP), and this biomass showed to be an alternative source of energy with high energy content and low moisture.    Keywords:  higher heating value, biomass, alternative energy source.

scholarly journals Identification of Compounds Released During Pyrolysis of Palm Kernel Shell (PKS) Using Pyrolysis-GC/MS

REAKTOR ◽  
2018 ◽  
Vol 17 (4) ◽  
pp. 185 ◽  
Author(s):  
Dieni Mansur ◽  
Sabar Pangihutan Simanungkalit
Keyword(s):  
Aromatic Compounds ◽  
Energy Content ◽  
Palm Kernel ◽  
Raw Material ◽  
Gas Chromatography Mass Spectrometry ◽  
Thermochemical Conversion ◽  
Pyrolysis Gas ◽  
Palm Kernel Shell ◽  
Degradation Temperature ◽  
Bio Oil

Pyrolysis is one of thermochemical conversion to convert biomass into bio-oil. The higher energy content in bio-oil suggests its potential as a raw material in the production of energy, bio-fuels, and other chemicals. Pyrolysis of PKS and the chemicals released were studied using pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS) at 400-600°C. Prior to pyrolysis, thermogravimetry experiments were carried out to monitor the degradation temperature of hemicellulose, cellulose, and lignin in the PKS. Degradation of hemicellulose occurred within a temperature range of 150-330°C, whereas the cellulose was degraded in temperatures range between 330-400°C. Degradation of lignin took place within a broad range of temperatures, which reached maximum at temperatures range of 200-500°C. Based on the Py-GC/MS results, pyrolysis of PKS at 400°C produced bio-oil that can be used as biofuel due to its high aromatic compounds but low carboxylic acids contents. Keywords: bio-oil; chemical; palm kernel shell; Py-GC/MS; thermogravimetry .

scholarly journals Preliminary Study on Properties of Small Diameter Wild Acacia mangium Species as Potential Biomass Energy Sources

2021 ◽  
Vol 4 (2) ◽  
pp. 138-144
Author(s):  
Mohd Sukhairi Mat Rasat ◽  
Muhammad Iqbal Ahmad ◽  
Mohd Hazim Mohamad Amini ◽  
Razak Wahab ◽  
Puad Elham ◽  
...  
Keyword(s):  
Alternative Energy ◽  
Energy Content ◽  
Renewable Energy Sources ◽  
Small Diameter ◽  
Acacia Mangium ◽  
Calorific Value ◽  
High Energy ◽  
Biomass Energy ◽  
Energy Sources ◽  
Particle Sizes

Currently, the primary energy supply in Malaysia is dominant by non-renewable energy sources such oil, natural gas and coal which contributed to the scarcity of these sources and occurrence of global warming. This phenomenon raises the public concerns to diversify the energy sources to sustain energy availability. To address these predicaments, biomass sources is among the prominent alternative energy sources since it is renewable and possesses minimal harms to the environment. Thus, the woody plant with high growth rate and high energy content that can be used to serve as potential biomass energy sources. In this study, small diameter (5-8cm) of wild Acacia mangium species have been determined and compared accordingly three (3) different portions (bottom, middle and top) and two (2) different particle sizes (0.5 and 1.5mm). The analysis conducted to determine the properties of raw material of Acacia mangium as biomass energy sources were proximate, physical and energy content properties. The result obtained for the energy content analysis of small diameter wild Acacia mangium has a mean calorific value range from 16.35 to 18.35MJ/kg between portions and particle sizes. In order to determine the effect of portions and particle sizes on each of the proximate, physical and energy content properties, two-way ANOVA was performed. It shows that both the portions and particle sizes have significant effect on calorific value (energy content) of small diameter wild Acacia mangium at 99% of confidence level. In a nutshell, the biomass energy properties of small diameter wild Acacia mangium with different portions and particle sizes were being determined.

scholarly journals Torrefaction of Palm Kernel Shell and Petcoke Blends for Various Mixing Ratios and Temperatures

2021 ◽  
Vol 45 (6) ◽  
pp. 477-484
Author(s):  
Mohd Faizal Hasan ◽  
Bemgba Bevan Nyakuma ◽  
Mohd Rosdzimin Abdul Rahman ◽  
Norazila Othman ◽  
Norhayati Ahmad ◽  
...  
Keyword(s):  
Palm Kernel ◽  
High Energy ◽  
Volatile Matter ◽  
High Energy Density ◽  
Dominant Factor ◽  
Energy Yield ◽  
Mixing Ratio ◽  
Palm Kernel Shell ◽  
Mixing Ratios ◽  
Solid Biofuels

In the present study, torrefaction of palm kernel shell (PKS) and petcoke blends was performed for the production of solid biofuels with high energy density. The torrefaction process was performed for mixtures with various mixing ratios (by weight) from 90:10 to 60:40 (PKS:petcoke). For torrefaction under various temperatures of 250℃ to 300℃, the mixing ratio of 60:40 was used. Meanwhile, residence time and nitrogen flow rate were fixed at 30 minutes and 1 l/min, respectively. In general, the fixed carbon and ash contents increased, while the moisture and volatile matter contents decreased after torrefaction. It has been elucidated that mass yield is a dominant factor that affects the energy yield of torrefied mixtures rather than the higher heating value (HHV) ratio. Based on the energy yield and ultimate analysis, it was found that a higher amount of petcoke and higher temperature give better performance, thus causing the torrefied mixture to become very close to coals region in Van Krevelen diagram. In this case, the mixture with a mixing ratio of 60:40 torrefied under the temperature of 300℃ gives the best performance. It was also found that this mixture is thermally stable than the mixture torrefied at 250℃.

Sign in / Sign up

Export Citation Format

Share Document