Cavitation in Normal Separation of Square and Circular Plates

1995 ◽  
Vol 117 (3) ◽  
pp. 403-409 ◽  
Author(s):  
S. Boedo ◽  
J. F. Booker
Keyword(s):  
Finite Element ◽  
Design Process ◽  
Lubricant Film ◽  
Circular Plates ◽  
Mixture Density ◽  
Normal Separation ◽  
Simulation Results ◽  
Bearing Design ◽  
Present Simulation

The “negative squeeze” lubrication problem is investigated by means of a mass-conservating finite element cavitation algorithm (described elsewhere) within the context of a dimensionless study of lubricant film behavior between rigid, parallel separating surfaces. Appropriate mesh geometries which capture spatial and temporal mixture density history and satisfy JFO conditions on the cavitation interface are determined. Present simulation results agree qualitatively with previous experiments, supporting the validity of the algorithm and its utility in the bearing design process.

Research into Contact Interaction of an Elastic Tool during Rotational Pattern Cutting of Sheet Parts

2016 ◽  
Vol 685 ◽  
pp. 408-412 ◽  
Author(s):  
E.G. Gromova ◽  
A.G. Bakanova
Keyword(s):  
Finite Element ◽  
Mathematical Simulation ◽  
Elastic Medium ◽  
Design Process ◽  
Experimental Research ◽  
Simulation Method ◽  
Medium Pressure ◽  
Element Simulation ◽  
Deformation Processes ◽  
Simulation Results

The paper describes a method of pattern cutting of sheet articles using the elastic medium pressure. Research works have been conducted into feasibility of the suggested pattern cutting using finite element simulation method. The experimental research was conducted into deformation processes during rotational separating stamping of sheet articles by means of elastic medium pressure so that to confirm relevance of the mathematical simulation results. The optimum design process parameter value combinations have been determined for implementing the rotary pattern cutting process.

A Finite Element Cavitation Algorithm: Application/Validation

1991 ◽  
Vol 113 (2) ◽  
pp. 255-260 ◽  
Author(s):  
A. Kumar ◽  
J. F. Booker
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Hydrodynamic Lubrication ◽  
Simulation Algorithm ◽  
Finite Element Implementation ◽  
Previous Experimental Data ◽  
Simulation Results ◽  
Present Simulation

A mass-conserving simulation algorithm for cavitating hydrodynamic lubrication has been described elsewhere. The algorithm, which is particularly well adapted to finite element implementation, is outlined qualitatively and demonstrated quantitatively through bearing applications studied experimentally by others. Present simulation results and previous experimental data agree relatively closely for these applications, providing limited validations of the algorithm and suggesting new lines of investigation.

Design of Five-Phase Transformer through Finite Element Simulation

2015 ◽  
Vol 761 ◽  
pp. 12-16
Author(s):  
Kasrul Abdul Karim ◽  
Lim Geok Yin ◽  
Nor Azizah Mohd Yusoff ◽  
Md Nazri Othman ◽  
Auzani Jidin
Keyword(s):  
Finite Element ◽  
Finite Elements ◽  
Finite Element Simulation ◽  
Design Process ◽  
Phase Angle ◽  
Motor Drive ◽  
Diagram Method ◽  
Element Simulation ◽  
Three Phase ◽  
Simulation Results

The interests in multiphase (more than three) system are escalating recently especially in the motor drive applications. Thus, this paper introduces the graphical phasor diagram method in designing the multiphase transformer connection. The proposed method eases the design process of the static multiphase transformer that produces multiphase output from the standard three phase input. The transformer connection was simulated in ANSYS Maxwell and the multiphase waveform with appropriate phase angle was obtained. The design of five-phase transformer using graphical phasor and simulation results from the finite elements software are presented in this paper.

Experimental and numerical studies on failure and energy absorption of composite thin-walled square tubes under quasi-static compression loading

2020 ◽  
Vol 21 (6) ◽  
pp. 623-634
Author(s):  
Haolei Mou ◽  
Zhenyu Feng ◽  
Jiang Xie ◽  
Jun Zou ◽  
Kun Zhou
Keyword(s):  
Finite Element ◽  
Shell Model ◽  
Energy Absorption ◽  
Failure Mode ◽  
Failure Criterion ◽  
Finite Element Models ◽  
Static Compression ◽  
Compression Loading ◽  
Thin Walled ◽  
Simulation Results

AbstractTo analysis the failure and energy absorption of carbon fiber reinforced polymer (CFRP) thin-walled square tube, the quasi-static axial compression loading tests are conducted for [±45]3s square tube, and the square tube after test is scanned to further investigate the failure mechanism. Three different finite element models, i.e. single-layer shell model, multi-layer shell model and stacked shell mode, are developed by using the Puck 2000 matrix failure criterion and Yamada Sun fiber failure criterion, and three models are verified and compared according to the experimental energy absorption metrics. The experimental and simulation results show that the failure mode of [±45]3s square tube is the local buckling failure mode, and the energy are absorbed mainly by intralaminar and interlaminar delamination, fiber elastic deformation, fiber debonding and fracture, matrix deformation cracking and longitudinal crack propagation. Three different finite element models can reproduce the collapse behaviours of [±45]3s square tube to some extent, but the stacked shell model can better reproduce the failure mode, and the difference of specific energy absorption (SEA) is minimum, which shows the numerical simulation results are in better agreement with the test results.

scholarly journals Investigation of the Thickness Differential on the Formability of Aluminum Tailor Welded Blanks

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 875
Author(s):  
Jie Wu ◽  
Yuri Hovanski ◽  
Michael Miles
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Numerical Model ◽  
Plastic Strain ◽  
Finite Element Model ◽  
Equivalent Plastic Strain ◽  
Element Model ◽  
Dome Height ◽  
Tailor Welded Blanks ◽  
Simulation Results

A finite element model is proposed to investigate the effect of thickness differential on Limiting Dome Height (LDH) testing of aluminum tailor-welded blanks. The numerical model is validated via comparison of the equivalent plastic strain and displacement distribution between the simulation results and the experimental data. The normalized equivalent plastic strain and normalized LDH values are proposed as a means of quantifying the influence of thickness differential for a variety of different ratios. Increasing thickness differential was found to decrease the normalized equivalent plastic strain and normalized LDH values, this providing an evaluation of blank formability.

scholarly journals 3D Simulation-Based Acoustic Wave Resonator Analysis and Validation Using Novel Finite Element Method Software

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2715
Author(s):  
Ruth Yadira Vidana Morales ◽  
Susana Ortega Cisneros ◽  
Jose Rodrigo Camacho Perez ◽  
Federico Sandoval Ibarra ◽  
Ricardo Casas Carrillo
Keyword(s):  
Finite Element ◽  
High Performance ◽  
Cloud Services ◽  
3D Simulation ◽  
3D Simulations ◽  
Acoustic Resonators ◽  
Analysis And Design ◽  
Wave Resonator ◽  
Film Bulk ◽  
Simulation Results

This work illustrates the analysis of Film Bulk Acoustic Resonators (FBAR) using 3D Finite Element (FEM) simulations with the software OnScale in order to predict and improve resonator performance and quality before manufacturing. This kind of analysis minimizes manufacturing cycles by reducing design time with 3D simulations running on High-Performance Computing (HPC) cloud services. It also enables the identification of manufacturing effects on device performance. The simulation results are compared and validated with a manufactured FBAR device, previously reported, to further highlight the usefulness and advantages of the 3D simulations-based design process. In the 3D simulation results, some analysis challenges, like boundary condition definitions, mesh tuning, loss source tracing, and device quality estimations, were studied. Hence, it is possible to highlight that modern FEM solvers, like OnScale enable unprecedented FBAR analysis and design optimization.

scholarly journals Longitudinal Guided Wave Inspection of Small-Diameter Elbowed Steel Tubes with a Novel Squirrel-Cage Magnetostrictive Sensor

2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Yao Liu ◽  
Xiucheng Liu ◽  
Chehua Yang ◽  
Wenxin Guo ◽  
Bin Wu ◽  
...  
Keyword(s):  
Finite Element ◽  
Guided Waves ◽  
Mode Conversion ◽  
Small Diameter ◽  
Longitudinal Mode ◽  
Guided Wave ◽  
Wall Defect ◽  
Squirrel Cage ◽  
Simulation Results ◽  
Magnetostrictive Sensor

In the study, ultrasonic longitudinal mode guided waves were employed to detect defects in elbowed tubes (without welds) with a diameter of 10 mm. Finite element simulation results highlighted that the emitted L(0,1) mode guided waves experienced strong reflection and mode conversion at the elbow region to generate F(1,1) mode, followed by slow and weak F(2,1) mode. The guided wave reflected from the elbow with a through-wall defect was manifested as two overlapped wave packets, which were good indicators of a defective elbow. To conduct L(0,1) mode guided waves inspection on the small-diameter elbowed tubes, a novel tailored squirrel-cage magnetostrictive sensor was employed in the experiment. The new sensor employed the configuration of segmental iron-cobalt strips and small-size permanent magnet arrays. The entire sensor is composed of two identical C-shaped sensor elements and can be recycled and installed conveniently. Experimental results obtained from healthy and defective tubes were consistent with the conclusions obtained from finite element simulations. An artificial through-wall defect at the elbow and a notch defect at the straight part of the tube could be simultaneously detected by L(0,1) mode guided waves through comparing experimental signals with simulation results.

Finite Element Simulation of Laser Beam Welding Induced Residual Stresses and Distortions in a T-Joint Configuration for Aeronautic Structures

2009 ◽  
Author(s):  
Muhammad Zain-ul-abdein ◽  
Daniel Ne´lias ◽  
Jean-Franc¸ois Jullien ◽  
Dominique Deloison
Keyword(s):  
Finite Element ◽  
Residual Stresses ◽  
Laser Beam ◽  
Boundary Conditions ◽  
Laser Beam Welding ◽  
Temperature Fields ◽  
Heat Transfer Analysis ◽  
Small Scale ◽  
Joint Configuration ◽  
Simulation Results

Laser beam welding has found its application in the aircraft industry for the fabrication of fuselage panels in a T-joint configuration. However, the inconveniences like distortions and residual stresses are inevitable consequences of welding. The effort is made in this work to experimentally measure and numerically simulate the distortions induced by laser beam welding of a T-joint with industrially used thermal and mechanical boundary conditions on the thin sheets of aluminium 6056-T4. Several small scale experiments were carried out with various instrumentations to establish a database necessary to verify the simulation results. Finite element (FE) simulation is performed with Abaqus and the conical heat source is programmed in FORTRAN. Heat transfer analysis is performed to achieve the required weld pool geometry and temperature fields. Mechanical analysis is then performed with industrial loading and boundary conditions so as to predict the distortion and the residual stress pattern. A good agreement is found amongst the experimental and simulation results.

Influence of Laser Shock Processing on the Weld Line and Finite Element Simulation

2011 ◽  
Vol 464 ◽  
pp. 627-631
Author(s):  
Jie Zhang ◽  
Ai Hua Sun ◽  
Le Zhu ◽  
Xiang Gu
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Welding Residual Stress ◽  
Laser Shock ◽  
Analysis Software ◽  
Laser Shock Processing ◽  
Element Analysis ◽  
Welding Line ◽  
Simulation Results ◽  
Shock Processing

Welding residual stress is one of the main factors that affect the strength and life of components. In order to explore the effect on residual stress of welding line by laser shock processing, finite element analysis software ANSYS is used to simulate the welding process, to calculate the distribution of welding residual stress field. On this basis, then AYSYS/LS-DYNA is used to simulate the laser shock processing on welding line. Simulation results show that residual stress distributions of weld region, heat-affected region and matrix by laser shock processing are clearly improved, and the tensile stress of weld region effectively reduce or eliminate. The simulation results and experimental results are generally consistent, it offer reasons for parameter optimization of welding and laser shock processing by finite element analysis software.

Sign in / Sign up

Export Citation Format

Share Document