Design and Modeling of One Refrigeration Ton Solar Assisted Adsorption Air Conditioning System

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
M. Alkhair ◽  
M. Y. Sulaiman ◽  
K. Sopian ◽  
C. H. Lim ◽  
E. Salleh ◽  
...  
Keyword(s):  
Air Conditioning ◽  
Cooling Water ◽  
Cooling Capacity ◽  
Hot Water ◽  
Activated Carbon Fiber ◽  
Coefficient Of Performance ◽  
Weather Data ◽  
Adsorption System ◽  
Water Storage Tank ◽  
Chilled Water

The modeling of the performance of a one refrigeration ton (RT) solar assisted adsorption air-conditioning refrigeration system using activated carbon fiber/ethanol as the adsorbent/adsorbate pair has been undertaken in this study. The effects of hot water, cooling water, chilled water inlet temperatures, and hot water and chilled water flow rates were taken into consideration in the optimization of the system and in the design of the condenser, evaporator, and hot water storage tank. The study includes analysis of the weather data and its effect on both the adsorption system and the cooling load. This is then followed by estimation of the cooling capacity and coefficient of performance (COP) of the adsorption system as a function of the input parameters. The results of the model will be compared to experimental data in a next step.

scholarly journals Installation and Operation of a Solar Cooling and Heating System Incorporated with Air-Source Heat Pumps

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 996 ◽  
Author(s):  
Li Huang ◽  
Rongyue Zheng ◽  
Udo Piontek
Keyword(s):  
Heating System ◽  
Cooling Capacity ◽  
Heat Pumps ◽  
Hot Water ◽  
Coefficient Of Performance ◽  
Energy Yield ◽  
Absorption Chiller ◽  
Annual Average ◽  
Water Storage Tank ◽  
Solar Cooling

A solar cooling and heating system incorporated with two air-source heat pumps was installed in Ningbo City, China and has been operating since 2018. It is composed of 40 evacuated tube modules with a total aperture area of 120 m2, a single-stage and LiBr–water-based absorption chiller with a cooling capacity of 35 kW, a cooling tower, a hot water storage tank, a buffer tank, and two air-source heat pumps, each with a rated cooling capacity of 23.8 kW and heating capacity of 33 kW as the auxiliary system. This paper presents the operational results and performance evaluation of the system during the summer cooling and winter heatingperiod, as well as on a typical summer day in 2018. It was found that the collector field yield and cooling energy yield increased by more than 40% when the solar cooling and heating system is incorporated with heat pumps. The annual average collector efficiency was 44% for cooling and 42% for heating, and the average coefficient of performance (COP) of the absorption chiller ranged between 0.68 and 0.76. The annual average solar fraction reached 56.6% for cooling and 62.5% for heating respectively. The yearly electricity savings accounted for 41.1% of the total electricity consumption for building cooling and heating.

scholarly journals Numerical Study of Integrated Solar Photovoltaic–Thermal Module with a Refrigeration System for Air-Conditioning and Hot Water Production under the Tropical Climate Conditions of Singapore

2018 ◽  
Vol 26 (03) ◽  
pp. 1850021 ◽  
Author(s):  
Swapnil Dubey ◽  
Alison Subiantoro
Keyword(s):  
Air Conditioning ◽  
Numerical Study ◽  
Power Saving ◽  
Tropical Climate ◽  
Cooling Capacity ◽  
Hot Water ◽  
Coefficient Of Performance ◽  
Solar Photovoltaic ◽  
Refrigeration System ◽  
Climate Conditions

Thermal systems of buildings in the tropics are highly energy intensive. In this study, a novel integrated solar photovoltaic–thermal–refrigeration (PVTR) system used to produce hot water and air-conditioning in the tropical climate conditions of Singapore was analyzed. A dynamic simulation model was formulated for the analysis. Mathematical models were developed for the PV sandwich attached with a solar flat plate collector and for the main components of the refrigeration system. Thorough investigation of the electrical and thermal performances of the system were conducted through the analysis of coefficient of performance (COP), cooling capacity, water temperature and heat capacity in water heater, photovoltaic (PV) module temperature and PV efficiency. The results show that attractive electrical and thermal performance can be achieved with a maximum annual cooling COP of 9.8 and a heating COP of 11.3. The PV efficiency and power saving were 14% and 53%, respectively. The annual cooling, heating and PV energy produced were 9.7, 15.6 and 1.6[Formula: see text]MWh, respectively. The financial payback period of the system was 3.2 years and greenhouse gas (GHG) emission reduction annually was 12.6 tons of CO2 equivalents (tCO2e).

scholarly journals Efficient Operation of Heat Source using High-temperature Chilled Water in an Advanced Office Building

2019 ◽  
Vol 111 ◽  
pp. 03071
Author(s):  
Yuya Suzuki ◽  
Misa Imazu ◽  
Jun Shinoda ◽  
Ryoya Furukawa ◽  
Yumiko Araki ◽  
...  
Keyword(s):  
High Temperature ◽  
Heat Source ◽  
Cooling Water ◽  
Hot Water ◽  
Coefficient Of Performance ◽  
Heat Extraction ◽  
Efficient Operation ◽  
Control Optimization ◽  
Chilled Water ◽  
Operation Control

In recent years, energy conservation has become a major focus in the industrial sector. Many office buildings in Japan achieve energy savings by introducing highly efficient equipment and systems, such as high-temperature cooling water (14 °C), which increases heat source efficiency. However, such equipment requires adjustments to increase operational efficiency. In this case study, the efficiency of equipment using high-temperature cooling water was further improved through operation control optimization. The energy efficiency before and after the improvement was compared. The target building has chilled and hot water supplied to each floor from district heating and high-temperature chilled water supplied from cooling chillers on the rooftop. The energy consumption of two floors was evaluated: a subjective floor with equipment using high-temperature cooling water installed, and a common floor with a conventional system. After on-site verification, changes were made to the operation control of the cooling towers, condenser pumps, primary pumps, secondary pumps, and air handling units. As a result, the coefficient of performance of the water-cooled chiller and the whole system improved by 0.40 and 0.45, respectively. The flow rate of the air conditioning equipment using high-temperature cooling water decreased while maintaining an equivalent amount of heat extraction. In conclusion, the efficiency of the equipment was further improved by operation control optimization.

A Dynamic Model of a Single-Stage LiBr-H2O Absorption Chiller

2016 ◽  
Author(s):  
Prangtip Samutr ◽  
Ali Al Alili
Keyword(s):  
Water Temperature ◽  
Dynamic Model ◽  
Cooling Capacity ◽  
Hot Water ◽  
Single Stage ◽  
Coefficient Of Performance ◽  
Maximum Relative Error ◽  
Outlet Temperature ◽  
Absorption Chiller ◽  
Chilled Water

This paper presents a dynamic model of a single-stage LiBr-H2O absorption chiller. A numerical model has been developed based on mass and energy balance equations and heat transfer equations. The model is developed using MATLAB program and the system of non-linear ordinary differential equation is solved using the 4th-order Runge-Kutta method. The model is validated with experimental results from pertained literature. The results show that the maximum relative error is found when comparing the dynamic model predicted chilled water outlet temperature to experimental data, which is around 9%. The effect of the inlet hot water temperature on the hot, cooling and chilled water outlet temperatures, cooling capacity and coefficient of performance (COP) are also studied. The results show that as the hot water outlet temperature increases, the outlet temperatures of cooling and chilled water slightly change. Moreover, the cooling capacity increases and the COP slight decreases as the hot water temperature increases.

scholarly journals Thermodynamic Evaluation of LiCl-H2O and LiBr-H2O Absorption Refrigeration Systems Based on a Novel Model and Algorithm

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 3037 ◽  
Author(s):  
Ren ◽  
Qian ◽  
Yao ◽  
Gan ◽  
Zhang
Keyword(s):  
Cooling Water ◽  
Cooling Capacity ◽  
Calculation Model ◽  
Hot Water ◽  
Coefficient Of Performance ◽  
Inlet Temperature ◽  
Thermodynamic Evaluation ◽  
Absorption Refrigeration ◽  
Exergetic Efficiency ◽  
Absorption Chillers

An absorption refrigeration system (ARS) is an alternative to the conventional mechanical compression system for cold production. This study developed a novel calculation model using the Matlab language for the thermodynamic analysis of ARS. It was found to be reliable in LiCl-H2O and LiBr-H2O ARS simulations and the parametric study was performed in detail. Moreover, two 50 kW water-cooled single effect absorption chillers were simply designed to analyze their off-design behaviors. The results indicate that LiCl-H2O ARS had a higher coefficient of performance (COP) and exergetic efficiency, particularly in the lower generator or higher condenser temperature conditions, but it operated more restrictively due to crystallization. The off-design analyses revealed that the preponderant performance of LiCl-H2O ARS was mainly due to its better solution properties because the temperature of each component was almost the same for both chillers in the operation. The optimum inlet temperature of hot water for LiCl-H2O (83 °C) was lower than that of LiBr-H2O (98 °C). The cooling water inlet temperature should be controlled within 41 °C, otherwise the performances are discounted heavily. The COP and cooling capacity could be improved by increasing the temperature of hot water or chilled water properly, contrary to the exergetic efficiency.

Performance of an autonomous solar powered absorption air conditioning system

2015 ◽  
Vol 26 (1) ◽  
pp. 106-112
Author(s):  
Tatenda J. Bvumbe ◽  
Freddie L. Inambao
Keyword(s):  
System Performance ◽  
Air Conditioning ◽  
Cold Water ◽  
Cooling System ◽  
Water Storage ◽  
Performance Data ◽  
Hot Water ◽  
Coefficient Of Performance ◽  
Water Storage Tank ◽  
Average Value

The demand for air conditioning is increasing due to changing architectural trends and increased standards of living and indoor comfort conditions. Coupled to this, refrigerants used in conventional refrigeration systems have detrimental effects on the environment. As a result, there is an urgent need to implement environmentally cleaner ways of satisfying this air-conditioning demand. Absorption cooling systems have shown great potential to do so. In this study, system performance data for an autonomous solar heating and cooling system installed at the Vodafone Site System Innovation Centre, at the Vodacom Campus in Midrand was collected and analysed. The system comprises a 116 m2 vacuum tube collector array, a 6.5 m3 hot water storage tank, a 35 kW LiBr-Water absorption chiller, 1 m3 of cold water storage, a dry cooler for the chiller, and two underground thermal stores to pre-cool the supply air to the building and the dry cooler respectively. System performance data was collected from the beginning of December 2011 to the end of January 2012 and used to estimate the system long term performance. The chiller has an average coefficient of performance (COP) of 0.51 whilst the solar COP has an average value of 0.24. The total installation cost is R2 822 436.89, with an annuity of R225 949.75 and a cost per kWh of R28.88.

Thermodynamic modelling of a single-effect LiBr-H2O absorption refrigeration cycle

2005 ◽  
Vol 219 (3) ◽  
pp. 261-273 ◽  
Author(s):  
M A Mehrabian ◽  
A E Shahbeik
Keyword(s):  
Computer Program ◽  
Cooling Water ◽  
Hot Water ◽  
Coefficient Of Performance ◽  
Cycle Performance ◽  
Design Parameters ◽  
Working Fluid ◽  
Refrigeration Cycle ◽  
Chilled Water ◽  
Single Effect

The objective of this paper is to develop a computer program for design and thermodynamic analysis of a single effect absorption chiller using LiBr-H2O solution as working fluid. The conditions of hot water entering and leaving the desorber, cooling water entering the absorber and leaving the condenser, chilled water entering and leaving the evaporator, as well as the approach temperatures in condenser, evaporator, desorber, and absorber, the effectiveness of solution heat exchanger, the chiller refrigeration power, and the ambient temperature are used as input data. The program then gives the thermodynamic properties of all state points, the design information of all heat exchangers in the cycle and the overall cycle performance. The results deduced from the computer program are used to study the effect of design parameters on cycle performance. For example, increasing the evaporator and generator temperatures or decreasing the condenser and desorber temperatures can improve the second-law efficiency of the cycle. It is also noticed that the temperatures of hot water, cooling water, and chilled water, respectively, at the inlet of the desorber, condenser, and evaporator have a great effect on cycle coefficient of performance. The results of this program can be used either for sizing a new refrigeration cycle or rating an existing system. It can also be used for optimization purposes. The predictions of the present program are compared with other simulating programs and qualitative agreement is achieved.

Experimental Investigation of a Pilot Compression Chiller With Alternatives Refrigerants R401a and R134a

2005 ◽  
Author(s):  
M. Fatouh
Keyword(s):  
Experimental Investigation ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Water Mass ◽  
Cooling Water ◽  
Cooling Capacity ◽  
Inlet Temperature ◽  
Chilled Water ◽  
Water Mass Flow Rate

This paper reports the results of an experimental investigation on a pilot compression chiller (4 kW cooling capacity) working with R401a and R134a as R12 alternatives. Experiments are conducted on a single-stage vapor compression refrigeration system using water as a secondary working fluid through both evaporator and condenser. Influences of cooling water mass flow rate (170–1900 kg/h), cooling water inlet temperature (27–43°C) and chilled water mass flow rate (240–1150 kg/h) on performance characteristics of chillers are evaluated for R401a, R134a and R12. Increasing cooling water mass flow rate or decreasing its inlet temperature causes the operating pressures and electric input power to reduce while the cooling capacity and coefficient of performance (COP) to increase. Pressure ratio is inversely proportional while actual loads and COP are directly proportional to chilled water mass flow rate. The effect of cooling water inlet temperature, on the system performance, is more significant than the effects of cooling and chilled water mass flow rates. Comparison between R12, R134a and R401a under identical operating conditions revealed that R401a can be used as a drop-in refrigerant to replace R12 in water-cooled chillers.

scholarly journals KAJI PERFORMANSI REFRIGERAN R-290, R-32, DAN R-410A SEBAGAI ALTERNATIF PENGGANTI R-22

2021 ◽  
Vol 4 ◽  
pp. 133-139
Author(s):  
Rikhard Ufie ◽  
Cendy S. Tupamahu ◽  
Sefnath J. E. Sarwuna ◽  
Jufraet Frans
Keyword(s):  
Air Conditioning ◽  
Cooling Capacity ◽  
Coefficient Of Performance ◽  
Condensation Temperature ◽  
Vapor Compression ◽  
Know How ◽  
Evaporation Temperature ◽  
Vapor Compression Cycle ◽  
Compression Cycle ◽  
Refrigeration Capacity

Refrigerant R-22 is a substance that destroys the ozone layer, so that in the field of air conditioning it has begun to be replaced, among others with refrigerants R-32 and R-410a, and also R-290. Through this research, we want to know how much Coefficient of Performance (COP) and Refrigeration Capacity (Qe) can be produced for the four types of refrigerants. The study was carried out theoretically for the working conditions of the vapor compression cycle with an evaporation temperature (Tevap) of 0, -5, and -10oC, a further heated refrigerant temperature (ΔTSH) of 5 oC, a condensation temperature (Tkond) of 45 oC and a low-cold refrigerant temperature. (ΔTSC) 10 oC and compression power of 1 PK . The results of the study show that the Coefficient of Performance (COP) in the use of R-22 and R-290 is higher than the use of R-32 and R-410a, which are 4,920 respectively; 4,891; 4.690 and 4.409 when working at an evaporation temperature of 0 oC; 4.260; 4,234; 4.060 and 3.812 when working at an evaporation temperature of -5 oC; and amounted to 3,730; 3,685; 3,550 and 3,324 if working at an evaporation temperature of -10 oC. Based on the size of the COP, if this installation works with a compression power of 1 PK, then the cooling capacity of the R-22 and R-290 is higher than the R-32 and R-410a, which are 3,617 respectively. kW; 3,597 kW; 3,449 kW and 3,243 kW. If working at an evaporation temperature of 0 oC; 3.133 kW; 3.114 kW; 2,986 kW and 2,804 kW if working at an evaporation temperature of -5 oC; and 2,741 kW; 2,710 kW; 2,611 kW and 2,445 kW if working at an evaporation temperature of -10oC.

scholarly journals Thermal Performance Analysis of Low-GWP Refrigerants in Automotive Air-Conditioning System

2020 ◽  
Vol 2020 ◽  
pp. 1-14 ◽  
Author(s):  
Yousuf Alhendal ◽  
Abdalla Gomaa ◽  
Gamal Bedair ◽  
Abdulrahim Kalendar
Keyword(s):  
Air Conditioning ◽  
Cooling Capacity ◽  
Coefficient Of Performance ◽  
Exergy Destruction ◽  
Air Conditioning System ◽  
Capacity Coefficient ◽  
Automotive Air Conditioning ◽  
Automotive Air Conditioning System ◽  
Compressor Power ◽  
Low Global Warming Potential

The energy and exergy of low-global warming potential (GWP) refrigerants were investigated experimentally and theoretically. Refrigerants with a modest GWP100 of  ≤ 150 can be sufficient for bringing down emissions which were concerned for the automotive air-conditioning system. Three types of low-GWP refrigerants, R152a, R1234yf, and R1234ze(E), were examined with particular reference to the current high-GWP of R134a. The effect of different evaporating and condensing temperatures in addition to compressor speed was considered. The purpose was to bring a clear view of the performance characteristics of possible environment friendly alternatives of R134a. The analysis was carried out with compressor power, cooling capacity, coefficient of performance, exergy destruction, and exergy efficiency. It was noted that the total exergy destruction of R1234yf was reduced by 15% compared to that of R134a. The refrigerant R1234ze(E) has the highest energetic and exergetic performance compared with the other investigated refrigerants.

Sign in / Sign up

Export Citation Format

Share Document