Multiphysics Modeling and Experimental Validation of Reconfigurable, E-Textile Origami Antennas

2018 ◽  
Author(s):  
Hamil Shah ◽  
Abdullahi Inshaar ◽  
Chengzhe Zou ◽  
Shreyas Chaudhari ◽  
Saad Alharbi ◽  
...  
Keyword(s):  
Antenna Arrays ◽  
Shape Change ◽  
Wave Radiation ◽  
Patch Antennas ◽  
Multiphysics Modeling ◽  
Textile Materials ◽  
New Class ◽  
Non Invasive ◽  
Radiation Properties ◽  
Wide Range

Physical deformation mechanisms are emerging as compelling and simple ways to adapt radio frequency (RF) characteristics of antennas in contrast to digital steering approaches acting on topologically fixed antennas. Concepts of physical reconfigurability also enable exceptional capabilities such as deployable and morphing antenna arrays that serve multiple functions and permit compact transport with ease. Yet, the emergent concepts lack broad understanding of effective approaches to integrate conformal, electrically conductive architectures with high-compliance foldable frameworks. To explore this essential interface where electrical demands and mechanical requirements may conflict, this research introduces a new class of origami-based tessellated antennas whose RF characteristics are self-tuned by physical reconfiguration of the antenna shape. E-textile materials are used to permit large antenna shape change while maintaining electrical conductivity. Dipole and patch antennas are considered as conventional antenna platforms upon which to innovate with the e-textile origami concept. Multiphysics modeling efforts establish the efficacy of foldable antenna geometries for broad tailoring of the RF characteristics. Experiments with proof-of-concept antennas confirm the large adaptability of wave radiation properties enabled by the reconfiguration of the e-textile origami surfaces. The results suggest that e-textile antennas can be integrated into clothing and mechanical structures, providing a non-invasive way of quantifying deformation for a wide range of applications.

scholarly journals High-isolation antenna array using SIW and realized with a graphene layer for sub-terahertz wireless applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Shahram Salekzamankhani ◽  
Sonia Aïssa ◽  
Chan H. See ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Antenna Arrays ◽  
Integrated Circuit ◽  
Mutual Coupling ◽  
Near Field ◽  
Dielectric Substrate ◽  
Patch Antennas ◽  
Reference Array ◽  
Radiation Properties ◽  
Array Structures

AbstractThis paper presents the results of a study on developing an effective technique to increase the performance characteristics of antenna arrays for sub-THz integrated circuit applications. This is essential to compensate the limited power available from sub-THz sources. Although conventional array structures can provide a solution to enhance the radiation-gain performance however in the case of small-sized array structures the radiation properties can be adversely affected by mutual coupling that exists between the radiating elements. It is demonstrated here the effectiveness of using SIW technology to suppress surface wave propagations and near field mutual coupling effects. Prototype of 2 × 3 antenna arrays were designed and constructed on a polyimide dielectric substrate with thickness of 125 μm for operation across 0.19–0.20 THz. The dimensions of the array were 20 × 13.5 × 0.125 mm3. Metallization of the antenna was coated with 500 nm layer of Graphene. With the proposed technique the isolation between the radiating elements was improved on average by 22.5 dB compared to a reference array antenna with no SIW isolation. The performance of the array was enhanced by transforming the patch to exhibit metamaterial characteristics. This was achieved by embedding the patch antennas in the array with sub-wavelength slots. Compared to the reference array the metamaterial inspired structure exhibits improvement in isolation, radiation gain and efficiency on average by 28 dB, 6.3 dBi, and 34%, respectively. These results show the viability of proposed approach in developing antenna arrays for application in sub-THz integrated circuits.

Microstructural characterization of laser-melted/roller-quenched dicalcium silicate

1988 ◽  
Vol 46 ◽  
pp. 582-583
Author(s):  
C. J. Chan ◽  
K. R. Venkatachari ◽  
W. M. Kriven ◽  
J. F. Young
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Shape Change ◽  
Microstructural Characterization ◽  
Particle Size Effect ◽  
Dicalcium Silicate ◽  
Laser Melting ◽  
Uniform Size ◽  
Cell Shape Change ◽  
Wide Range

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

Role of Cardiac MRI in Detecting Familial Hypertrophic Cardiomyopathy: Review

2016 ◽  
Vol 1 (1) ◽  
pp. 4
Author(s):  
Marymol Koshy ◽  
Bushra Johari ◽  
Mohd Farhan Hamdan ◽  
Mohammad Hanafiah
Keyword(s):  
Hypertrophic Cardiomyopathy ◽  
Magnetic Resonance ◽  
Genetic Disorder ◽  
Familial Hypertrophic Cardiomyopathy ◽  
Non Invasive ◽  
Wide Range ◽  
Proper Diagnosis ◽  
Magnetic Resonance Imaging Mri ◽  
Potential Use

Hypertrophic cardiomyopathy (HCM) is a global disease affecting people of various ethnic origins and both genders. HCM is a genetic disorder with a wide range of symptoms, including the catastrophic presentation of sudden cardiac death. Proper diagnosis and treatment of this disorder can relieve symptoms and prolong life. Non-invasive imaging is essential in diagnosing HCM. We present a review to deliberate the potential use of cardiac magnetic resonance (CMR) imaging in HCM assessment and also identify the risk factors entailed with risk stratification of HCM based on Magnetic Resonance Imaging (MRI).

scholarly journals Applications of Coupled Fixed Points for Multivalued Maps in the Equilibrium in Duopoly Markets and in Aquatic Ecosystems

Axioms ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 44
Author(s):  
Gana Gecheva ◽  
Miroslav Hristov ◽  
Diana Nedelcheva ◽  
Margarita Ruseva ◽  
Boyan Zlatanov
Keyword(s):  
Fixed Points ◽  
Aquatic Ecosystems ◽  
Market Equilibrium ◽  
Multivalued Maps ◽  
New Class ◽  
Wide Range ◽  
Coupled Fixed Points ◽  
Ordered Pairs ◽  
Duopoly Markets

We have obtained a new class of ordered pairs of multivalued maps that have pairs of coupled fixed points. We illustrate the main result with two examples that cover a wide range of models. We apply the main result in models in duopoly markets to get a market equilibrium and in aquatic ecosystems, also to get an equilibrium.

scholarly journals Recent Advances in Fabrication of Non-Isocyanate Polyurethane-Based Composite Materials

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3497
Author(s):  
Piotr Stachak ◽  
Izabela Łukaszewska ◽  
Edyta Hebda ◽  
Krzysztof Pielichowski
Keyword(s):  
Raw Materials ◽  
Synthesis Method ◽  
Polymeric Materials ◽  
Original Research ◽  
Significant Group ◽  
Oh Groups ◽  
New Class ◽  
Hazardous Chemical ◽  
Wide Range

Polyurethanes (PUs) are a significant group of polymeric materials that, due to their outstanding mechanical, chemical, and physical properties, are used in a wide range of applications. Conventionally, PUs are obtained in polyaddition reactions between diisocyanates and polyols. Due to the toxicity of isocyanate raw materials and their synthesis method utilizing phosgene, new cleaner synthetic routes for polyurethanes without using isocyanates have attracted increasing attention in recent years. Among different attempts to replace the conventional process, polyaddition of cyclic carbonates (CCs) and polyfunctional amines seems to be the most promising way to obtain non-isocyanate polyurethanes (NIPUs) or, more precisely, polyhydroxyurethanes (PHUs), while primary and secondary –OH groups are being formed alongside urethane linkages. Such an approach eliminates hazardous chemical compounds from the synthesis and leads to the fabrication of polymeric materials with unique and tunable properties. The main advantages include better chemical, mechanical, and thermal resistance, and the process itself is invulnerable to moisture, which is an essential technological feature. NIPUs can be modified via copolymerization or used as matrices to fabricate polymer composites with different additives, similar to their conventional counterparts. Hence, non-isocyanate polyurethanes are a new class of environmentally friendly polymeric materials. Many papers on the matter above have been published, including both original research and extensive reviews. However, they do not provide collected information on NIPU composites fabrication and processing. Hence, this review describes the latest progress in non-isocyanate polyurethane synthesis, modification, and finally processing. While focusing primarily on the carbonate/amine route, methods of obtaining NIPU are described, and their properties are presented. Ways of incorporating various compounds into NIPU matrices are characterized by the role of PHU materials in copolymeric materials or as an additive. Finally, diverse processing methods of non-isocyanate polyurethanes are presented, including electrospinning or 3D printing.

scholarly journals The atlas of RNase H antisense oligonucleotide distribution and activity in the CNS of rodents and non-human primates following central administration

2020 ◽  
Author(s):  
Paymaan Jafar-nejad ◽  
Berit Powers ◽  
Armand Soriano ◽  
Hien Zhao ◽  
Daniel A Norris ◽  
...  
Keyword(s):  
Motor Neurons ◽  
Muscular Atrophy ◽  
Neurological Diseases ◽  
Cell Types ◽  
Rnase H ◽  
Central Administration ◽  
Spinal Motor Neurons ◽  
New Class ◽  
Wide Range ◽  
Therapeutic Development

Abstract Antisense oligonucleotides (ASOs) have emerged as a new class of drugs to treat a wide range of diseases, including neurological indications. Spinraza, an ASO that modulates splicing of SMN2 RNA, has shown profound disease modifying effects in Spinal Muscular Atrophy (SMA) patients, energizing efforts to develop ASOs for other neurological diseases. While SMA specifically affects spinal motor neurons, other neurological diseases affect different central nervous system (CNS) regions, neuronal and non-neuronal cells. Therefore, it is important to characterize ASO distribution and activity in all major CNS structures and cell types to have a better understanding of which neurological diseases are amenable to ASO therapy. Here we present for the first time the atlas of ASO distribution and activity in the CNS of mice, rats, and non-human primates (NHP), species commonly used in preclinical therapeutic development. Following central administration of an ASO to rodents, we observe widespread distribution and target RNA reduction throughout the CNS in neurons, oligodendrocytes, astrocytes and microglia. This is also the case in NHP, despite a larger CNS volume and more complex neuroarchitecture. Our results demonstrate that ASO drugs are well suited for treating a wide range of neurological diseases for which no effective treatments are available.

scholarly journals Epigenetic Regulation of Cannabinoid-Mediated Attenuation of Inflammation and Its Impact on the Use of Cannabinoids to Treat Autoimmune Diseases

2021 ◽  
Vol 22 (14) ◽  
pp. 7302
Author(s):  
Bryan Latrell Holloman ◽  
Mitzi Nagarkatti ◽  
Prakash Nagarkatti
Keyword(s):  
Autoimmune Diseases ◽  
Chronic Inflammation ◽  
Cannabinoid Receptors ◽  
T Regulatory Cells ◽  
Neurological Diseases ◽  
Suppressor Cells ◽  
The Body ◽  
New Class ◽  
Wide Range ◽  
Clinical Disorders

Chronic inflammation is considered to be a silent killer because it is the underlying cause of a wide range of clinical disorders, from cardiovascular to neurological diseases, and from cancer to obesity. In addition, there are over 80 different types of debilitating autoimmune diseases for which there are no cure. Currently, the drugs that are available to suppress chronic inflammation are either ineffective or overtly suppress the inflammation, thereby causing increased susceptibility to infections and cancer. Thus, the development of a new class of drugs that can suppress chronic inflammation is imperative. Cannabinoids are a group of compounds produced in the body (endocannabinoids) or found in cannabis (phytocannabinoids) that act through cannabinoid receptors and various other receptors expressed widely in the brain and immune system. In the last decade, cannabinoids have been well established experimentally to mediate anti-inflammatory properties. Research has shown that they suppress inflammation through multiple pathways, including apoptosis and inducing immunosuppressive T regulatory cells (Tregs) and myeloid-derived suppressor cells (MDSCs). Interestingly, cannabinoids also mediate epigenetic alterations in genes that regulate inflammation. In the current review, we highlight how the epigenetic modulations caused by cannabinoids lead to the suppression of inflammation and help identify novel pathways that can be used to target autoimmune diseases.

scholarly journals Novel Protein-Repellent and Antibacterial Resins and Cements to Inhibit Lesions and Protect Teeth

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Li Cao ◽  
Junling Wu ◽  
Qiang Zhang ◽  
Bashayer Baras ◽  
Ghalia Bhadila ◽  
...  
Keyword(s):  
Orthodontic Treatment ◽  
The Novel ◽  
Dental Resin ◽  
Biofilm Growth ◽  
New Class ◽  
Dental Resins ◽  
Wide Range ◽  
Oral Biofilms ◽  
One Year

Orthodontic treatment is increasingly popular as people worldwide seek esthetics and better quality of life. In orthodontic treatment, complex appliances and retainers are placed in the patients’ mouths for at least one year, which often lead to biofilm plaque accumulation. This in turn increases the caries-inducing bacteria, decreases the pH of the retained plaque on an enamel surface, and causes white spot lesions (WSLs) in enamel. This article reviews the cutting-edge research on a new class of bioactive and therapeutic dental resins, cements, and adhesives that can inhibit biofilms and protect tooth structures. The novel approaches include the use of protein-repellent and anticaries polymeric dental cements containing 2-methacryloyloxyethyl phosphorylcholine (MPC) and dimethylaminododecyl methacrylate (DMAHDM); multifunctional resins that can inhibit enamel demineralization; protein-repellent and self-etching adhesives to greatly reduce oral biofilm growth; and novel polymethyl methacrylate resins to suppress oral biofilms and acid production. These new materials could reduce biofilm attachment, raise local biofilm pH, and facilitate the remineralization to protect the teeth. This novel class of dental resin with dual benefits of antibacterial and protein-repellent capabilities has the potential for a wide range of dental and biomedical applications to inhibit bacterial infection and protect the tissues.

Diastereoselective double ring closing metathesis reactions as an approach to symmetrical bicyclodienes

2000 ◽  
Vol 78 (6) ◽  
pp. 868-883 ◽  
Author(s):  
Mark Lautens ◽  
Gregory Hughes ◽  
Valentin Zunic
Keyword(s):  
Ring Closing Metathesis ◽  
Double Ring ◽  
New Class ◽  
Wide Range ◽  
Metathesis Reactions ◽  
Bicyclic Dienes

A new class of bicyclic dienes which contain a σ plane of symmetry are efficiently prepared in a diastereoselective fashion using ring closing metathesis reactions. These molecules have potential as starting materials for a wide range of organic targets.Key words: metathesis, catalysis, stereoselective, decalin, desymmetrization.

A new class of self-similar antenna arrays

2002 ◽  
Vol 47 (3) ◽  
pp. 209-214 ◽  
Author(s):  
V. F. Kravchenko ◽  
M. A. Basarab
Keyword(s):  
Antenna Arrays ◽  
New Class ◽  
Self Similar
Sign in / Sign up

Export Citation Format

Share Document