Simulation and Experimental Analysis of Magnetorheological Dampers Under Impact and Shock Loading

2015 ◽  
Author(s):  
Q. Ouyang ◽  
J. Wang ◽  
J. J. Zheng ◽  
X. J. Wang ◽  
Y. Xi
Keyword(s):  
Magnetic Field ◽  
Electromagnetic Field ◽  
Fluid Flow ◽  
Flow Field ◽  
Shock Loading ◽  
Coupling Effect ◽  
Mr Damper ◽  
Damping Force ◽  
Annular Gap ◽  
The Magnetic Field

Magnetorheological (MR) fluids contain suspensions that exhibit a rapid, reversible and tunable transition from a free-flowing state to a semi-solid state upon the application of an external magnetic field. This behavior has attracted significant attention in the development of dampers, shock absorption system, military and defence system and safety devices in aerospace engineering. However, many of the issues pertaining to MR damper behavior in impact and shock applications are relatively unknown. This study provides an experimental analysis and simulation analysis by using COMSOL multyphysics of MR dampers when they are subjected to impact and shock loading. To this end, a novel MR damper with a four-stage piston and independent input currents is designed and analyzed. In this paper, two-dimension symmetrical Computational Fluid Dynamics (CFDs) simulation for the laminar flow of an incompressible MR fluid in the annular gap in the presence of a varying magnetic field. The purpose of this research is to study the couple effect of electromagnetic field and the fluid flow field and magnitude of damping force in a macroscopic view. The governing differential equations describing the magnetic field and fluid flow in the annular gap are solved numerically by COMSOL Multiphysics. Through the electromagnetic analysis and flow field analysis, the coupling effect of the magnetic field between the coil and the multiphysics coupling effect of novel MR was be found. For the each coil has an independent power supply, so it can provide a wider range damping force by combining the electromagnetic field of coils.

Investigating flexible textile-based coils for wireless charging wearable electronics

2019 ◽  
Vol 50 (3) ◽  
pp. 333-345 ◽  
Author(s):  
Danmei Sun ◽  
Meixuan Chen ◽  
Symon Podilchak ◽  
Apostolos Georgiadis ◽  
Qassim S Abdullahi ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electrical Conductivity ◽  
Electromagnetic Field ◽  
Electric Field ◽  
Dimensional Stability ◽  
Screen Printing ◽  
Wearable Electronics ◽  
Wireless Charging ◽  
The Magnetic Field ◽  
Screen Printed

Smart and interactive textiles have been attracted great attention in recent years. This research explored three different techniques and processes in developing textile-based conductive coils that are able to embed in a garment layer. Coils made through embroidery and screen printing have good dimensional stability, although the resistance of screen printed coil is too high due to the low conductivity of the print ink. Laser cut coil provided the best electrical conductivity; however, the disadvantage of this method is that it is very difficult to keep the completed coil to the predetermined shape and dimension. The tested results show that an electromagnetic field has been generated between the textile-based conductive coil and an external coil that is directly powered by electricity. The magnetic field and electric field worked simultaneously to complete the wireless charging process.

Increasing the effective affect of the magnetic field on the weld pool

2021 ◽  
pp. 29-33
Author(s):  
Keyword(s):  
Magnetic Field ◽  
Electromagnetic Field ◽  
Magnetic Fields ◽  
Weld Pool ◽  
Electromagnetic Effects ◽  
Weld Pools ◽  
The Magnetic Field

Variants of weld pools obtained by verification with the influence of magnetic fields are considered. Methods for increasing the effectiveness of electromagnetic effects during welding are proposed. Keywords: welding, electromagnetic field, weld pool, induction, coating. [email protected], [email protected]

Magnetohydrodynamic effects on flow structures and heat transfer over two cylinders wrapped with a porous layer in side

2016 ◽  
Vol 26 (5) ◽  
pp. 1416-1432 ◽  
Author(s):  
Saman Rashidi ◽  
Javad Abolfazli Esfahani ◽  
Mohammad Sadegh Valipour ◽  
Masoud Bovand ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Flow Field ◽  
Porous Layer ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Circular Cylinders ◽  
Flow Structures ◽  
Content Type ◽  
The Magnetic Field

Purpose – The analysis of the flow field and heat transfer around a tube row or tube banks wrapped with porous layer have many related engineering applications. Examples include the reactor safety analysis, combustion, compact heat exchangers, solar power collectors, high-performance insulation for buildings and many another applications. The purpose of this paper is to perform a numerical study on flows passing through two circular cylinders in side-by-side arrangement wrapped with a porous layer under the influence of a magnetic field. The authors focus the attention to the effects of magnetic field, Darcy number and pitch ratio on the mechanism of convection heat transfer and flow structures. Design/methodology/approach – The Darcy-Brinkman-Forchheimer model for simulating the flow in porous medium along with the Maxwell equations for providing the coupling between the flow field and the magnetic field have been used. Equations with the relevant boundary conditions are numerically solved using a finite volume approach. In this study, Stuart and Darcy numbers are varied within the range of 0 < N < 3 and 1e-6 < Da < 1e-2, respectively, and Reynolds and Prandtl numbers are equal to Re=100 and Pr=0.71, respectively. Findings – The results show that the drag coefficient decreases for N < 0.6 and increases for N > 0.6. Also, the effect of magnetic field is negligible in the gap between two cylinders because the magnetic field for two cylinders counteracts each other in these regions. Originality/value – To the authors knowledge, in the open literature, flow passing over two circular cylinders in side-by-side arrangement wrapped with a porous layer has been rarely investigated especially under the influence of a magnetic field.

Boiling heat transfer characteristics of binary magnetic fluid flow in a vertical circular pipe with a partly heated region

2004 ◽  
Vol 218 (2) ◽  
pp. 223-232 ◽  
Author(s):  
S Shuchi ◽  
K Sakatani ◽  
H Yamaguchi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Boiling Heat Transfer ◽  
Transfer Rate ◽  
Heated Region ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
The Magnetic Field

An investigation was conducted for heat transfer characteristics of binary magnetic fluid flow in a partly heated circular pipe experimentally. The boiling heat transfer characteristics on the effects of the relative position of the magnetic field to the heated region were particularly considered in the present study. From the experimental verification, the Nusselt number, representing boiling heat transfer characteristics, was obtained for various flow and magnetic conditions which were represented by the non-dimensional parameters of the Reynolds number and the magnetic pressure number. Additionally, the rate of change of the Nusselt number found by applying the magnetic field was also estimated and the optimal position of the field to the partly heated region was discussed. The results indicated that the effect of the magnetic field to the heat transfer rate from the heated wall was mainly subjected to the effect of the vortices induced in the magnetic field region and the possibility of controlling the heat transfer rate by applying an outer magnetic field to utilize the effect.

A Proof of the Biot-Savart Law

1968 ◽  
Vol 72 (689) ◽  
pp. 437
Author(s):  
B. G. Newman
Keyword(s):  
Magnetic Field ◽  
Field Theory ◽  
Electromagnetic Field ◽  
Fluid Mechanics ◽  
Small Length ◽  
Line Vortex ◽  
Line Current ◽  
Electromagnetic Field Theory ◽  
The Magnetic Field

The Biot-Savart law gives the velocity associated with an elemental portion of line vortex, or the magnetic field associated with an elemental portion of line current. The following proof may appeal to students who approach fluid mechanics or electromagnetic-field theory from the engineering viewpoint. It will be stated in terms of fluid mechanics. Consider a very small length δs of line vortex of circulation strength Γ. At P(x) the velocity δV associated with this portion depends on Γ δs and x.

Effects of Electromagnetic Fields on the Quantum Yield of Free Radicals in Cryptochrome

2019 ◽  
Vol 953 ◽  
pp. 127-132
Author(s):  
Yu Ling Chen ◽  
Du Yan Geng ◽  
Chuan Fang Chen
Keyword(s):  
Magnetic Field ◽  
Electromagnetic Field ◽  
Free Radicals ◽  
Free Radical ◽  
Quantum Yield ◽  
Electromagnetic Fields ◽  
Applied Magnetic Field ◽  
Geomagnetic Field ◽  
Quantum Biology ◽  
The Magnetic Field

In this paper, the effects of the quantum yield of free radicals in cryptochrome exposed to different electromagnetic fields were studied through the quantum biology. The results showed that the spikes characteristics was produced in the free radicals in cryptochrome, when it exposed to the applied magnetic field (ω = 50 Hz, B0 = 50 μT). The spikes produced by the electromagnetic field was independent of the changes of polar θ. When the frequency of the magnetic field increased, the spikes characteristics produced in unit time also increased. These results showed that the environmental electromagnetic field could affect the response of organisms to the geomagnetic field by influencing the quantum yield in the mechanism of free radical pair.It provided a basis for studying the influence of environmental electromagnetic field on biology, especially the navigation of biological magnetism.

Application of Systematic Innovative Method to Improve the Structure of Magnetorheological Damper

2013 ◽  
Vol 284-287 ◽  
pp. 3586-3590 ◽  
Author(s):  
Chia Pao Chang ◽  
Ying Hsiang Lin ◽  
Yu Cheng Chen
Keyword(s):  
Mr Damper ◽  
Magnetorheological Damper ◽  
National Defense ◽  
Damping Force ◽  
Innovative Method ◽  
Engineering Parameters ◽  
Improved Design ◽  
Acting Force ◽  
The Magnetic Field ◽  
Different Levels

Magnetorheological fluid (MR fluid) has been widely used in the industrial fields, especially in the machinery, automobile, national defense and construction industries. Most of the researches of the Magnetorheological Damper only utilized device to examine the effects of different levels of voltage, amplitude and frequency on energy reduction. They find a combination of the number of circles of wire, damping tubes, enameled wire sleeves for liquid of MR damper controlled to increase the damping force. This study uses different ways to solve the problem. We think outside the box and apply the concepts and technology of systematic innovation method to improve the structure of the MR damper for increasing the effectiveness. This study uses the contradiction matrix, 39 engineering parameters, and 40 inventive and innovative principles to identify the areas of improvement to address the exist problems. Regarding the decrease of the magnetic field acting force due to increase of the moving distance and the effect on the magnetorheological damper efficiency. Finally, we propose an improved design of the MR Damper.

A Proposed Experiment of Direct Detecting of the Vector Potential within Classical Electrodynamics

1997 ◽  
Vol 11 (12) ◽  
pp. 531-540
Author(s):  
V. Onoochin
Keyword(s):  
Magnetic Field ◽  
Electromagnetic Field ◽  
Charged Particle ◽  
Vector Potential ◽  
Energy Exchange ◽  
Short Pulse ◽  
Classical Electrodynamics ◽  
Direct Influence ◽  
Ultra Short Pulse ◽  
The Magnetic Field

An experiment within the framework of classical electrodynamics is proposed, to demonstrate Boyer's suggestion of a change in the velocity of a charged particle as it passes close to a solenoid. The moving charge is replaced by an ultra-short pulse (USP), whose characteristics should depend on the current in the coil. This dependence results from the exchange of energy between the electromagnetic field of the pulse and the magnetic field within the solenoid. This energy exchange could only be explained, by assuming that the vector potential of the solenoid has a direct influence on the pulse.

Dynamically consistent magnetic fields produced by differential rotation

1987 ◽  
Vol 178 ◽  
pp. 521-534 ◽  
Author(s):  
D. R. Fearn ◽  
M. R. E. Proctor
Keyword(s):  
Magnetic Field ◽  
Velocity Field ◽  
Flow Field ◽  
Differential Rotation ◽  
Zonal Flow ◽  
Nonlinear Characteristic ◽  
Poloidal Magnetic Field ◽  
Self Consistent ◽  
Self Consistency ◽  
The Magnetic Field

We investigate the dynamical consequences of an axisymmetric velocity field with a poloidal magnetic field driven by a prescribed e.m.f. E. The problem is motivated by previous investigations of dynamically driven dynamos in the magnetostrophic range. A geostrophic zonal flow field is added to a previously described velocity, and determined by the requirement that Taylor's constraint (Taylor 1963) (guaranteeing dynamical self-consistency of the fields) be satisfied. Several solutions are exhibited, and it is suggested that self-consistent solutions can always be found to this ‘forced’ problem, whereas the usual α-effect dynamo formalism in which E is a linear function of the magnetic field leads to a difficult transcendentally nonlinear characteristic value problem that may not always possess solutions.

Sign in / Sign up

Export Citation Format

Share Document