Full Scale Application of Thermal Ageing in Line Pipe Material Selection for Deepwater Pipelines

2014 ◽  
Author(s):  
Niels Kerstens ◽  
Ping Liu ◽  
Duane DeGeer
Keyword(s):  
Wall Thickness ◽  
Development Program ◽  
Thermal Ageing ◽  
Full Scale ◽  
Small Scale ◽  
Pipe Material ◽  
The South ◽  
Line Pipe ◽  
Material Development ◽  
South Stream

Comprising 4 pipelines over 900 km in length, with 32-in diameter and traversing water depths over 2200 m, the South Stream project requires a step-out in technology application. Following several years of preparation, the project is now approaching its implementation. In order to document the reliability of the collapse resistance for South Stream, an extensive material development program was initiated and executed, including small scale, medium scale, and full scale testing on over one hundred purposely manufactured pipe joints by world’s 5 leading mills. Testing performed included plate tests, full scale collapse tests on various combinations of plate sources, steel grades, and thermal ageing condition, pressure-bend tests, and reverse bending tests. A large number of medium and small scale tests were performed to allow the development of a suitably reliable statistical database for the probabilistic wall thickness design. In addition, programs were developed and executed for weldability tests, performing over one hundred trial welds, and for H2S resistance tests. This material development program was built on INTECSEA’s extensive experience with deep water large diameter pipelines (i.e. Oman-India, Blue Stream, Medgaz, Mardi Gras, IGI, etc.). Due to its extent and rigorous approach the South Stream material development program was able to conclusively prove the feasibility of the selected technological approach at an industrial scale. This paper provides an overview of the key design issues that were successfully addressed and the major technological advances that have been implemented as part of the linepipe material development process for deepwater pipelines in an H2S containing environment. The practical significance of this program is to optimize the wall thickness to a level that is manufacturable by the industry and hence enables the South Stream Project to proceed with its unprecedented depth and diameter combination.

TurkStream Collapse Test Program

2018 ◽  
Author(s):  
Chris Timms ◽  
Doug Swanek ◽  
Duane DeGeer ◽  
Arjen Meijer ◽  
Ping Liu ◽  
...  
Keyword(s):  
Thermal Ageing ◽  
Full Scale ◽  
The Black Sea ◽  
Small Scale ◽  
Test Program ◽  
Line Pipe ◽  
Medium Scale ◽  
Collapse Resistance ◽  
Full Scale Tests ◽  
The Impact

The TurkStream pipeline project is designed to transport approximately 32 billion cubic meters of natural gas annually from Russia to Turkey under the Black Sea, with more than 85% of the deep-water route being deeper than 2000 m. The offshore section is intended to consist of two parallel lines, each approximately 900 km long. The preliminary stages of the front end engineering design (pre-FEED) phase was managed by INTECSEA. To support the analyses and design of the deepest portions, a full scale collapse test program was performed by C-FER Technologies (C-FER). This collapse test program, which included 62 full-scale collapse and pressure+bend tests, 54 medium-scale ring collapse tests, and hundreds of small-scale tests, was primarily aimed at measuring, quantifying and documenting the increase in pipe strength and collapse resistance resulting from the thermal induction heat treatment effect (thermal ageing) that arises during the pipe coating process. Two grades of 32-inch (813 mm) outside diameter (OD) line-pipe, SAWL450 and SAWL485 with wall thicknesses of 39.0 mm or 37.4 mm, respectively, were supplied from various mills for testing. The collapse test program objectives were as follows: • Determine the collapse resistance of line pipes originating from various pipe mills; • Determine the pressure+bend performance of line pipes originating from various pipe mills; • Measure the effect of thermal ageing on material and collapse testing results, including the impact of multiple thermal cycles; and • Evaluate the results of medium-scale ring collapse tests as compared to full-scale tests. This paper presents selected results of this work, along with some comparisons to predictive equations.

Full-Scale Reeling Tests of HFI Welded Line Pipe for Offshore Reel-Laying Installation

2014 ◽  
Author(s):  
Karl Christoph Meiwes ◽  
Susanne Höhler ◽  
Marion Erdelen-Peppler ◽  
Holger Brauer
Keyword(s):  
Mechanical Testing ◽  
Mechanical Test ◽  
Strength Properties ◽  
Full Scale ◽  
Bending Test ◽  
Small Scale ◽  
Pipe Material ◽  
Deformation Capacity ◽  
Line Pipe ◽  
Tension And Compression

During reel-laying repeated plastic strains are introduced into a pipeline which may affect strength properties and deformation capacity of the line pipe material. Conventionally the effect on the material is simulated by small-scale reeling simulation tests. For these, coupons are extracted from pipes that are loaded in tension and compression and thermally aged, if required. Afterwards, specimens for mechanical testing are machined from these coupons and tested according to the corresponding standards. Today customers often demand additional full-scale reeling simulation tests to assure that the structural pipe behavior meets the strain demands as well. Realistic deformations have to be introduced into a full-size pipe, followed by aging, sampling and mechanical testing comparable to small-scale reeling. In this report the fitness for use of a four-point-bending test rig for full-scale reeling simulation tests is demonstrated. Two high-frequency-induction (HFI) welded pipes of grade X65M (OD = 323.9 mm, WT = 15.9 mm) from Salzgitter Mannesmann Line Pipe GmbH (MLP) are bent with alternate loading. To investigate the influences of thermal aging from polymer-coating process one test pipe had been heat treated beforehand, in the same manner as if being PE-coated. After the tests mechanical test samples were machined out of the plastically strained pipes. A comparison of results from mechanical testing of material exposed to small- and full-scale reeling simulation is given. The results allow an evaluation of the pipe behavior as regards reeling ability and plastic deformation capacity.

Seamless Linepipe Response Under Small and Full Scale Reeling Simulation

2016 ◽  
Author(s):  
Israel Marines-Garcia ◽  
Jorge A. Aldana-Díaz ◽  
Philippe P. Darcis ◽  
Hector M. Quintanilla
Keyword(s):  
Lead Time ◽  
Cyclic Strain ◽  
Extensive Study ◽  
Full Scale ◽  
Small Scale ◽  
Pipe Material ◽  
Line Pipe ◽  
Offshore Pipelines ◽  
Ageing Condition ◽  
Pipe Materials

Offshore pipelines projects, installed by reel-laying operations, are gaining momentum due to the increasing worldwide capacity of Reel Lay Vessels. It is well known that reel-laying installation causes repeated plastic straining (cyclic deformation) and, as a consequence, cyclic strain and ageing test is usually required for qualifying line pipe materials for such installation method. This qualification is typically named reeling simulation. Reeling simulations can be made via full or small scale. In practice, full scale qualification lead time and full scale reeling simulation machines availability could be a constraint, thus, small scale reeling simulation is usually the best alternative. However, the similitude of small scale versus full scale simulations could be questioned. On this basis, an extensive study was carried-out considering tensile, toughness and sour testing, in order to evaluate the material response after reeling simulation, in order to clarify if the line pipe material will behave similarly regardless the straining method (small scale or full scale). Different small scale samples configuration for straining were tested, depending on the posterior mechanical or sour test, and two different full scale reeling simulation machines were used for plain pipes straining. Five seamless plain pipes, X65 line pipe were used for this study, with 3 (three) different outer diameters of 10.75″, 11.67″ & 16″ (273 mm, 296 mm & 406 mm). The current paper will present the main mechanical results of these materials after strain and ageing condition, comparing full and small scale straining methods.

Development of X90 and X100 Steel Grades for Seamless Linepipe Products

2014 ◽  
Author(s):  
Diana Toma ◽  
Silke Harksen ◽  
Dorothee Niklasch ◽  
Denise Mahn ◽  
Ashraf Koka
Keyword(s):  
Wall Thickness ◽  
Deep Water ◽  
High Strength ◽  
Oil And Gas Industry ◽  
Pipe Material ◽  
Line Pipe ◽  
Materials Development ◽  
Additional Tool ◽  
Technical Requirements ◽  
Steel Grades

The general trend in oil and gas industry gives a clear direction towards the need for high strength grades up to X100. The exploration in extreme regions and under severe conditions, e.g. in ultra deep water regions also considering High Temperature/High Pressure Fields or arctic areas, becomes more and more important with respect to the still growing demand of the world for natural resources. Further, the application of high strength materials enables the possibility of structure weight reduction which benefits to materials and cost reduction and increase of efficiency in the pipe line installation process. To address these topics, the development of such high strength steel grades with optimum combination of high tensile properties, excellent toughness properties and sour service resistivity for seamless quenched and tempered pipes are in the focus of the materials development and improvement of Vallourec. This paper will present the efforts put into the materials development for line pipe applications up to grade X100 for seamless pipes manufactured by Pilger Mill. The steel concept developed by Vallourec over the last years [1,2] was modified and adapted according to the technical requirements of the Pilger rolling process. Pipes with OD≥20″ and wall thickness up to 30 mm were rolled and subsequent quenched and tempered. The supportive application of thermodynamic and kinetic simulation techniques as additional tool for the material development was used. Results of mechanical characterization by tensile and toughness testing, as well as microstructure examination by light-optical microscopy will be shown. Advanced investigation techniques as scanning electron microcopy and electron backscatter diffraction are applied to characterize the pipe material up to the crystallographic level. The presented results will demonstrate not only the effect of a well-balanced alloying concept appointing micro-alloying, but also the high sophisticated and precise thermal treatment of these pipe products. The presented alloying concept enables the production grade X90 to X100 with wall thickness up to 30 mm and is further extending the product portfolio of Vallourec for riser systems for deepwater and ultra-deep water application [1, 3, 4].

Non-Linear Stress Analysis of Complex Umbilical Cross-Sections

2002 ◽  
Author(s):  
Svein Sævik ◽  
Knut I. Ekeberg
Keyword(s):  
Cross Section ◽  
Axial Force ◽  
Plastic Material ◽  
Axial Strain ◽  
Development Program ◽  
Full Scale ◽  
Small Scale ◽  
Applied Theory ◽  
Element Formulation ◽  
Material Models

Nexans Norway is, together with Marintek, currently developing a software for detailed analysis of complex umbilical cross-section designs. The software development project combines numerical methods with small-scale testing of involved materials, as well as full-scale testing of a wide variety of umbilical designs, essential for calibration and verification purposes. Each umbilical design is modelled and comparisons are made with respect to global behaviour in terms of: • Axial strain versus axial force; • Axial strain versus torsion; • Torsion versus torsion moment for various axial force levels; • Moment versus curvature for different tension levels. The applied theory is based on curved beam and curved axisymmetric thin shell theories. The problem is formulated in terms of finite elements applying the Principle of Virtual Displacements. Each body of the cross-section interacts with the other bodies by contact elements which are formulated by a penalty formulation. The contact elements operate in the local surface coordinate system and include eccentricity, surface stiffness and friction effects. The software is designed to include the following functionality: • Arbitrary geometry modelling including helical elements wound into arbitrary order; • The helical elements may include both tubes and filled bodies; • Elastic, hyper-elastic, and elastic-plastic material models; • Initial strain; • Contact elements, including friction; • Tension, torsion, internal pressure, external pressure, bending and external contact loading (caterpillars, tensioners, etc.). The paper focuses on the motivation behind the development program including a description of the different activities. The theory is described in terms of kinematics, material models and finite element formulation. A test example is further presented comparing predicted behaviour with respect to full-scale test results.

Effects of Soil Cohesiveness and Depth on Dynamic Ductile Fracture Speeds

2008 ◽  
Author(s):  
D. Rudland ◽  
D.-J. Shim ◽  
G. M. Wilkowski ◽  
S. Kawaguchi ◽  
N. Hagiwara ◽  
...  
Keyword(s):  
Ductile Fracture ◽  
Large Scale ◽  
Soil Depth ◽  
Crack Arrest ◽  
Small Scale ◽  
Total Density ◽  
Pipe Material ◽  
Pipe Steels ◽  
Line Pipe ◽  
Fracture Arrest

The ductile fracture resistance of newer line pipe steels is of concern for high grade/strength steels and higher-pressure pipeline designs. Although there have been several attempts to make improved ductile fracture arrest models, the model that is still used most frequently is the Battelle Two-Curve Method (TCM). This analysis incorporates the gas-decompression behavior with the fracture toughness of the pipe material to predict the minimum Charpy energy required for crack arrest. For this analysis, the influence of the backfill is lumped into one empirically developed “soil” coefficient which is not specific to soil type, density or strength. No attempt has been made to quantify the effects of soil depth, type, total density or strength on the fracture speeds of propagating cracks in line pipe steels. In this paper, results from small-scale and large-scale burst tests with well-controlled backfill conditions are presented and analyzed to determine the effects of soil depth and cohesiveness on the fracture speeds. Combining this data with the past full-scale burst data used in generating the original backfill coefficient provides additional insight into the effects of the soil properties on the fracture speeds and the arrest of running ductile fractures in line pipe materials.

Alloying Concept for High-Strength Seamless Heavy-Wall Line Pipe Suitable for Sour Service Applications

2004 ◽  
Author(s):  
K. Biermann ◽  
C. Kaucke ◽  
M. Probst-Hein ◽  
B. Koschlig
Keyword(s):  
Heat Treatment ◽  
Wall Thickness ◽  
Oil And Gas ◽  
High Strength ◽  
Gas Production ◽  
Pipe Material ◽  
Low Carbon ◽  
Line Pipe ◽  
Oil And Gas Production ◽  
Sour Service

Offshore oil and gas production worldwide is conducted in increasingly deep waters, leading to more and more stringent demands on line pipes. Higher grades and heavier wall thicknesses in combination with deep temperature toughness properties, good weldability and suitability for sour service applications are among the characteristics called for. It is necessary that pipe manufacturers develop materials to meet these at times conflicting requirements. An alloying concept based on steel with very low carbon content is presented. This type of material provides excellent toughness properties at deep temperatures in line pipe with a wall thickness of up to 70 mm, produced by hot rolling followed by QT heat treatment. Pipes from industrial production of identical chemical composition and heat treatment achieved grades X65 to X80, depending on wall thickness. The properties of the steel used in pipes are presented. The resistance of the pipe material to the influence of sour gas was assessed by standard tests. To demonstrate weldability, test welds were performed and examined.

Comparison of Soil Properties From World-Wide Full-Scale Pipe Testing Facilities

2008 ◽  
Author(s):  
D. Rudland ◽  
G. Mannucci ◽  
R. Andrews ◽  
S. Kawaguchi
Keyword(s):  
The United States ◽  
Full Scale ◽  
Pipe Material ◽  
Soil Behavior ◽  
Line Pipe ◽  
Crack Driving Force ◽  
Empirical Correction ◽  
Standard Procedures ◽  
Future Fracture ◽  
Empirical Correction Factor

The dynamic behavior of an axially propagating crack in buried line pipe is dependent not only on the pipe material, and the decompressing gas, but also the surrounding soil. The density and cohesiveness of the soil restrains the forming pipe flaps behind the crack tip and decreases the apparent crack driving force. Traditional fracture analyses, such as the Battelle Two-Curve (BTC) approach, lump the soil behavior into one empirical correction factor that does not differentiate between different soil types. In this effort, soils from the full-scale pipe test facilities in the United States, Italy, United Kingdom, and Denmark, were tested with standard procedures to characterize the soils by type, grain size, density and strength. A comparison of these properties is presented in this archival paper, which can be used in future fracture analysis development efforts.

Evaluation of Wearing Pipe for Subsea Mining With Large Particles in Slurry Transportation

2015 ◽  
Author(s):  
Satoru Takano ◽  
Masao Ono ◽  
Sotaro Masanobu
Keyword(s):  
Full Scale ◽  
Small Scale ◽  
Pipe Material ◽  
Test Results ◽  
Material Loss ◽  
Large Particles ◽  
Fundamental Understanding ◽  
Maximum Particle ◽  
Scale Test ◽  
Set Up

For a fundamental understanding of pipe wear under hydraulic transportation of deep-sea mining, a small scale test is conducted because there are many restrictions in conducting a full scale test. The small scale test apparatus are set up using the pipes of about 80mm in diameter and the rocks of which maximum particle diameters are about 20mm are used. In the test, the pipe materials and the pipe inclination are changed to evaluate the differential of the amount of pipe material loss. Furthermore, the amount of the pipe material loss in full scale is estimated based on the small scale test results.

Minimum Wall Thickness Requirements for Ultra Deep-Water Pipelines

2003 ◽  
Author(s):  
Enrico Torselletti ◽  
Luigino Vitali ◽  
Roberto Bruschi ◽  
Leif Collberg
Keyword(s):  
Wall Thickness ◽  
Deep Water ◽  
Failure Modes ◽  
Limit State ◽  
Strain Curve ◽  
External Pressure ◽  
Design Guidelines ◽  
Compressive Yield Strength ◽  
Pipe Material ◽  
Line Pipe

The offshore pipeline industry is planning new gas trunklines at water depth ever reached before (up to 3500 m). In such conditions, external hydrostatic pressure becomes the dominating loading condition for the pipeline design. In particular, pipe geometric imperfections as the cross section ovality, combined load effects as axial and bending loads superimposed to the external pressure, material properties as compressive yield strength in the circumferential direction and across the wall thickness etc., significantly interfere in the definition of the demanding, in such projects, minimum wall thickness requirements. This paper discusses the findings of a series of ultra deep-water studies carried out in the framework of Snamprogetti corporate R&D. In particular, the pipe sectional capacity, required to sustain design loads, is analysed in relation to: • The fabrication technology i.e. the effect of cold expansion/compression (UOE/UOC) of TMCP plates on the mechanical and geometrical pipe characteristics; • The line pipe material i.e. the effect of the shape of the actual stress-strain curve and the Y/T ratio on the sectional performance, under combined loads; • The load combination i.e. the effect of the axial force and bending moment on the limit capacity against collapse and ovalisation buckling failure modes, under the considerable external pressure. International design guidelines are analysed in this respect, and experimental findings are compared with the ones from the application of proposed limit state equations and from dedicated FE simulations.

Sign in / Sign up

Export Citation Format

Share Document