scholarly journals Does Leaf Micro-Morphology Influence The Recognition Of Particles On SEM Images?

2021 ◽  
pp. 22-37
Author(s):  
Samira Muhammad ◽  
Karen Wuyts ◽  
Karolien De Wael ◽  
Roeland Samson
Keyword(s):  
Sem Images ◽  
Micro Morphology ◽  
Morphology Influence

Study of Micro-Morphology Influence on the EHL Analysis of Water-Based Ferrofluid

2013 ◽  
Vol 373-375 ◽  
pp. 417-420
Author(s):  
Xiujiang Shi ◽  
You Qiang Wang
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Local Pressure ◽  
Thickness Change ◽  
Thickness Increase ◽  
Film Thickness Increase ◽  
Water Based ◽  
Pressure Peak ◽  
Micro Morphology ◽  
Morphology Influence

The elastohydrodynamic lubrication (EHL) study of water-based ferrofluid bearing with single sine-shaped peak, rectangular-shaped valley and V-shaped valley was carried out. The influence of the amplitude and the width on the pressure and film thickness was discussed. The results reveal that the pressure and film thickness change apparently with the change of micro-morphology; The amplitudes of the local pressure peak and the film thickness increase with the increase of amplitudes; The widths of the local pressure peak and the film thickness increase with the increase of width.

Preparation of hydrophilic reactive polyurethane and its application of anti-water erodibility in ecological restoration

2019 ◽  
Vol 39 (8) ◽  
pp. 736-743 ◽  
Author(s):  
Xinshan Rong ◽  
Lu Zhang ◽  
Xiaoying Zhang ◽  
Zhishui Liang ◽  
Jing Wei ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Surface Hardness ◽  
Ethylene Vinyl Acetate ◽  
Sem Images ◽  
Water Contact ◽  
Soil And Water Loss ◽  
New Material ◽  
Micro Morphology ◽  
Soil And Water ◽  
Scanning Electron

Abstract In this work, a novel hydrophilic reactive polyurethane (HRPU) material and HRPU-based composite materials were prepared and used as chemical anti-water erodibility materials for Pisha sandstone. The compressive strength, surface hardness, penetrability and water contact angle were investigated. The results showed that the deformation rate of Pisha sandstone sprayed with HRPU/ethylene-vinyl acetate (EVA) material was approximately 15%, significantly larger than that of other Pisha sandstone samples, while the compressive strength was significantly improved, providing a good penetrability to form a hydrophobic consolidation layer, locking the water in soil. Meanwhile, the micro-morphology of Pisha sandstone was observed by scanning electron microscopy (SEM) images and the water retaining ability of HRPU/EVA material was discussed in detail. The results showed that the water content of Pisha sandstone sprayed with HRPU/EVA material could reach more than 20%, even after 16 h, which presented an excellent water retaining ability. In addition, the anti-water erodibility of Pisha sandstone with HRPU/EVA was improved to prevent soil and water loss, and provide some feasibility for growing plants. Therefore, it could provide a new material and idea to protect the Pisha sandstone area and other erosion areas.

Analysis of Contrast Reversal in SEM Images

1972 ◽  
Vol 30 ◽  
pp. 398-399
Author(s):  
M. D. Coutts ◽  
E. R. Levin
Keyword(s):  
Incident Beam ◽  
Normal Incidence ◽  
Beam Current ◽  
Secondary Emission ◽  
Image Contrast ◽  
Sem Images ◽  
Secondary Electrons ◽  
Image Position

On tilting samples in an SEM, the image contrast between two elements, x and y often decreases to zero at θε, which we call the no-contrast angle. At angles above θε the contrast is reversed, θ being the angle between the specimen normal and the incident beam. The available contrast between two elements, x and y, in the SEM can be defined as,(1)where ix and iy are the total number of reflected and secondary electrons, leaving x and y respectively. It can easily be shown that for the element x,(2)where ib is the beam current, isp the specimen absorbed current, δo the secondary emission at normal incidence, k is a constant, and m the reflected electron coefficient.

Mosaic Mapping: A Means of Tiling Images to Shorten Acquisition Speed for Lower - Magnification SEM Images and Wavelength Dispersive Spectrometers (WDS) X-Ray Maps

1996 ◽  
Vol 54 ◽  
pp. 438-439
Author(s):  
J.D. Geller ◽  
C.R. Herrington
Keyword(s):  
Limiting Factors ◽  
X Rays ◽  
Angular Range ◽  
Acceptance Angle ◽  
Sem Images ◽  
Worst Case ◽  
X Ray ◽  
Focusing Distance ◽  
Layered Crystals ◽  
Working Distance

The minimum magnification for which an image can be acquired is determined by the design and implementation of the electron optical column and the scanning and display electronics. It is also a function of the working distance and, possibly, the accelerating voltage. For secondary and backscattered electron images there are usually no other limiting factors. However, for x-ray maps there are further considerations. The energy-dispersive x-ray spectrometers (EDS) have a much larger solid angle of detection that for WDS. They also do not suffer from Bragg’s Law focusing effects which limit the angular range and focusing distance from the diffracting crystal. In practical terms EDS maps can be acquired at the lowest magnification of the SEM, assuming the collimator does not cutoff the x-ray signal. For WDS the focusing properties of the crystal limits the angular range of acceptance of the incident x-radiation. The range is dependent upon the 2d spacing of the crystal, with the acceptance angle increasing with 2d spacing. The natural line width of the x-ray also plays a role. For the metal layered crystals used to diffract soft x-rays, such as Be - O, the minimum magnification is approximately 100X. In the worst case, for the LEF crystal which diffracts Ti - Zn, ˜1000X is the minimum.

vitreal cells and specialized phagocytes in the chick embryo retina: A TEM and SEM study

1990 ◽  
Vol 48 (3) ◽  
pp. 330-331
Author(s):  
M.A. Cuadros ◽  
M.J. Martinez-Guerrero ◽  
A. Rios
Keyword(s):  
Cell Death ◽  
Plasma Membrane ◽  
Acid Phosphatase ◽  
Chick Embryo ◽  
Basement Membrane ◽  
Sem Images ◽  
Intimate Contact ◽  
Cellular Processes ◽  
Sem Study ◽  
Free Cells

In the chick embryo retina (days 3-4 of incubation), coinciding with an increase in cell death, specialized phagocytes characterized by intense acid phosphatase activity have been described. In these preparations, all free cells in the vitreal humor (vitreal cells) were strongly labeled. Conventional TEM and SEM techniques were used to characterize them and attempt to determine their relationship with retinal phagocytes.Two types of vitreal cells were distinguished. The first are located at some distance from the basement membrane of the neuroepithelium, and are rounded, with numerous vacuoles and thin cytoplasmic prolongations. Images of exo- and or endocytosis were frequent; the cells showed a well-developed Golgi apparatus (Fig. 1) In SEM images, the cells was covered with short cellular processes (Fig. 3). Cells lying parallel to or alongside the basement membrane are elongated. The plasma membrane is frequently in intimate contact with the basement membrane. These cells have generally a large cytoplasmic expansion (Fig. 5).

Correlation of Pore Structure and Permeability by SEM-Image Analysis

1990 ◽  
Vol 48 (1) ◽  
pp. 428-429
Author(s):  
C. A. Callender ◽  
Wm. C. Dawson ◽  
J. J. Funk
Keyword(s):  
Image Analysis ◽  
Pore Structure ◽  
Imaging System ◽  
Pore Space ◽  
Simulation Models ◽  
Image Analyzer ◽  
Imaging Data ◽  
Sem Images ◽  
Thin Sections ◽  
Rock Types

The geometric structure of pore space in some carbonate rocks can be correlated with petrophysical measurements by quantitatively analyzing binaries generated from SEM images. Reservoirs with similar porosities can have markedly different permeabilities. Image analysis identifies which characteristics of a rock are responsible for the permeability differences. Imaging data can explain unusual fluid flow patterns which, in turn, can improve production simulation models.Analytical SchemeOur sample suite consists of 30 Middle East carbonates having porosities ranging from 21 to 28% and permeabilities from 92 to 2153 md. Engineering tests reveal the lack of a consistent (predictable) relationship between porosity and permeability (Fig. 1). Finely polished thin sections were studied petrographically to determine rock texture. The studied thin sections represent four petrographically distinct carbonate rock types ranging from compacted, poorly-sorted, dolomitized, intraclastic grainstones to well-sorted, foraminiferal,ooid, peloidal grainstones. The samples were analyzed for pore structure by a Tracor Northern 5500 IPP 5B/80 image analyzer and a 80386 microprocessor-based imaging system. Between 30 and 50 SEM-generated backscattered electron images (frames) were collected per thin section. Binaries were created from the gray level that represents the pore space. Calculated values were averaged and the data analyzed to determine which geological pore structure characteristics actually affect permeability.

Influence of Multiwall Carbon Nanotube on mechanical and wear properties of Copper – Iron composite

2020 ◽  
Vol 17 (1) ◽  
pp. 7570-7576 ◽  
Author(s):  
H. Sh. Hammood ◽  
S. S. Irhayyim ◽  
A. Y. Awad ◽  
H. A. Abdulhadi
Keyword(s):  
Carbon Nanotubes ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Hydraulic Press ◽  
Dry Sliding Wear ◽  
Multiwall Carbon Nanotube ◽  
Wear Properties ◽  
Sem Images ◽  
Wear Rates ◽  
Multiwall Carbon

Multiwall Carbon nanotubes (MWCNTs) are frequently attractive due to their novel physical and chemical characteristics, as well as their larger aspect ratio and higher conductivity. Therefore, MWCNTs can allow tremendous possibilities for the improvement of the necessarily unique composite materials system. The present work deals with the fabrication of Cu-Fe/CNTs hybrid composites manufactured by powder metallurgy techniques. Copper powder with 10 vol. % of iron powder and different volume fractions of Multi-Wall Carbon Nanotubes (MWCNTs) were mixed to get hybrid composites. The hybrid composites were fabricated by adding 0.3, 0.6, 0.9, and 1.2 vol.% of MWCNTs to Cu- 10% Fe mixture using a mechanical mixer. The samples were compressed under a load of 700 MPa using a hydraulic press to compact the samples. Sintering was done at 900°C for 2 h at 5ºC/min heating rate. The microscopic structure was studied using a Scanning Electron Microscope (SEM). The effect of CNTs on the mechanical and wear properties, such as micro-hardness, dry sliding wear, density, and porosity were studied in detail. The wear tests were carried out at a fixed time of 20 minutes while the applied loads were varied (5, 10, 15, and 20 N). SEM images revealed that CNTs were uniformly distributed with relative agglomeration within the Cu/Fe matrix. The results showed that the hardness, density, and wear rates decreased while the percentage of porosity increased with increasing the CNT volume fraction. Furthermore, the wear rate for all the CNTs contents increased with the applied load.

An In Vitro Analysis of Sodium Hypochlorite Decontamination for the Reuse of Implant Healing Abutments

2020 ◽  
Author(s):  
Ahmad Almehmadi
Keyword(s):  
Sodium Hypochlorite ◽  
Bacterial Culture ◽  
Brain Heart Infusion ◽  
In Vitro Study ◽  
Vitro Study ◽  
Sem Images ◽  
Streptococcus Sanguis ◽  
Implant Dentistry ◽  
Vitro Analysis

Abstract The re-use of healing abutments (HAs) has become common practice in implant dentistry for economic concerns and the aim of this in-vitro study was to assess the effect of sodium hypochlorite (NaOCl) in decontamination of HAs. 122 HAs (Used and sterilized n=107; New n=15) were procured from 3 centers, of which 3 samples were discarded due to perforation in sterilization pouch.  For sterility assessment, the used HAs (n=80) were cultured in Brain Heart Infusion Broth (BHI) and Potato Dextrose Agar (PDA), bacterial isolates were identified in 7 samples. Also, 24 used HAs were stained with Phloxine B, photographed and compared to new HAs (n=5). Scanning electron microscope (SEM) assessed the differences between the two sets of HAs, following which the 7 contaminated HAs along with 24 used HAs from staining experiment (Total=31) were subsequently treated with sodium hypochlorite (NaOCl) and SEM images were observed. About 8.75% of HAs tested positive in bacterial culture; Streptococcus sanguis, Dermabacter hominis, Staphylococcus haemolyticus, and Aspergillus species were isolated. Phloxine B staining was positive for used and sterilized HAs when compared to controls. The SEM images revealed deposits in the used HAs and although treatment with NaOCl eliminated the contamination of cultured HAs, the SEM showed visible debris in the HA thread region. This in-vitro study concluded that SEM images showed debris in used HAs at screw-hole and thread regions even though they tested negative in bacterial culture. The treatment with NaOCl of used HAs showed no bacterial contamination but the debris was observed in SEM images. Future studies on the chemical composition, biological implications, and clinical influence is warranted before considering the reuse of HAs.

A New Species of Turnera (Turneraceae, Passifloraceae s. l.) from the Brazilian Cerrado

2020 ◽  
Vol 45 (4) ◽  
pp. 826-832
Author(s):  
Lamarck Rocha ◽  
Maria Mercedes Arbo
Keyword(s):  
New Species ◽  
Brazilian Cerrado ◽  
Distribution Map ◽  
Sem Images ◽  
Dark Blue ◽  
A New Species

Abstract—Turnera macrosperma, a new species from the Brazilian Cerrado, is described and illustrated. The new species belongs to the series Turnera and can be characterized by the white petals with dark blue/violet basal spot and large seeds with papillose aril. SEM images, distribution map, and comments on taxonomy and morphology are presented.

On Riccia marginata and related species (Ricciaceae, Marchantiophyta)

2012 ◽  
Vol 46 ◽  
pp. 298-305 ◽  
Author(s):  
A. D. Potemkin ◽  
T. Ahti
Keyword(s):  
Related Species ◽  
Lake Ladoga ◽  
Leningrad Region ◽  
Sem Images ◽  
North Shore ◽  
The North ◽  
Molecular Studies ◽  
The Future ◽  
The Town

Riccia marginata Lindb. was described by S. O. Lindberg (1877) from the outskirts of the town of Sortavala near the north shore of Lake Ladoga, Republic of Karelia, Russia. The species has been forgotten in most recent liverwort accounts of Europe, including Russia. Lectotypification of R. marginata is provided. R. marginata shares most characters with R. beyrichiana Hampe ex Lehm. It differs from “typical” plants of R. beyrichiana in having smaller spores, with ± distinctly finely areolate to roughly papillose proximal surfaces and a narrower and shorter thallus, as well as in scarcity or absence of marginal hairs. It may represent continental populations of the suboceanic-submediterranean R. beyrichiana, known in Russia from the Leningrad Region and Karelia only. The variability of spore surfaces in R. beyrichiana is discussed and illustrated by SEM images. A comparison with the spores of R. bifurca Hoffm. is provided. The question how distinct R. marginata is from R. beyrichiana needs to be clarified by molecular studies in the future, when adequate material is available. R. marginata is for the time being, provisionally, included in R. beyrichiana.

Sign in / Sign up

Export Citation Format

Share Document