scholarly journals Stability Evaluation of Overtopped Concrete Hydraulic Structures Using Computational Fluid Dynamics

2020 ◽  
Author(s):  
Mario Freitas ◽  
Etienne Favre ◽  
Pierre Léger ◽  
Lineu José Pedroso
Keyword(s):  
Water Pressure ◽  
Back Analysis ◽  
Hydrodynamic Pressure ◽  
Flow Conditions ◽  
Gravity Dams ◽  
Pressure Fields ◽  
Dam Stability ◽  
The Stability ◽  
Resultant Forces ◽  
Safety Guidelines

A particularly challenging aspect in gravity dam stability assessment is the estimation of the induced hydrodynamic water pressure when water with significant velocity is overtopping gravity dams and flowing in or over spillway components. The water flow conditions, including the related pressure fields and resultant forces, are difficult to quantify accurately. Herein, existing dam safety guidelines to estimate the weight of the overflowing water nappe on gravity dams with rectangular crests are first reviewed. Then, a CFD methodology is developed to improve the simplified estimation of hydrodynamic pressure fields acting on the rectangular crests of submerged gravity dams. The CFD pressures are used as input data to classical structural stability analyses based on the gravity method to more adequately quantify the dam stability during overtopping. A back analysis is also performed on the stability of an existing gated spillway that was overtopped during the 1996 Saguenay flood in Québec.

scholarly journals Tunnel Back Analysis Based on Differential Evolution Using Stress and Displacement

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Joon-Sang An ◽  
Kyung-Nam Kang ◽  
Ju-Young Choi ◽  
Won-Suh Sung ◽  
Vathna Suy ◽  
...  
Keyword(s):  
Differential Evolution ◽  
Differential Evolution Algorithm ◽  
Back Analysis ◽  
Friction Angle ◽  
Internal Displacement ◽  
Average Error ◽  
Analysis Algorithm ◽  
Evolution Algorithm ◽  
Displacement Based ◽  
The Stability

The stability of tunnels has mainly been evaluated based on displacement. Because displacement due to the excavation process is significant, back analysis of the structure and ground can be performed easily. Recently, the length of a segment-lined tunnel driven by the mechanized tunneling method is increasing. Because the internal displacement of a segment-lined tunnel is trivial, it is difficult to analyze the stability of segment-lined tunnels using the conventional method. This paper proposes a back analysis method using stress and displacement information for a segment-lined tunnel. A differential evolution algorithm was adopted for tunnel back analysis. Back analysis based on the differential evolution algorithm using stress and displacement was established and performed using the finite difference code, FLAC3D, and built-in FISH language. Detailed flowcharts of back analysis based on DEA using both monitored displacement stresses were also suggested. As a preliminary study, the target variables of the back analysis adopted in this study were the elastic modulus, cohesion, and friction angle of the ground. The back analysis based on the monitored displacement is useful when the displacement is significant due to excavation. However, the conventional displacement-based back analysis is unsuitable for a segment-lined tunnel after construction because of its trivial internal displacement since the average error is greater than 32% and the evolutionary calculation is finalized due to the maximum iteration criteria. The average error obtained from the proposed back analysis algorithm using both stress and displacement ranged within approximately 6–8%. This also confirms that the proposed back analysis algorithm is suitable for a segment-lined tunnel.

The Stability of Flow Through Porous Screens

1960 ◽  
Vol 64 (594) ◽  
pp. 359-362 ◽  
Author(s):  
P. G. Morgan
Keyword(s):  
Pressure Drop ◽  
Sufficient Information ◽  
Flow Conditions ◽  
Flow Through ◽  
The Stability

In many cases of the flow through porous screens, one may consider it to be made up of a number of jets passing through the openings of the screen. These jets are separated by a series of wakes behind the solid parts of the screen. The majority of investigations on the flow through such screens have been concerned with the measurement of pressure drop and its variation with different flow conditions; it has been assumed that the pressure is discontinuous at the screen itself and that the pressure drop coefficient Δp/½ρυ2 provides sufficient information, where Δp is the pressure drop across the screen, ρ the density of the fluid, and υ the velocity of approach to the screen.

PSEUDOSTATIC DESIGN FACTORS FOR STABILITY OF WATERFRONT-RETAINING WALL DURING EARTHQUAKE

2010 ◽  
Vol 04 (04) ◽  
pp. 387-400 ◽  
Author(s):  
DEEPANKAR CHOUDHURY ◽  
SYED MOHD AHMAD
Keyword(s):  
Retaining Wall ◽  
Pressure Ratio ◽  
Free Water ◽  
Hydrodynamic Pressure ◽  
Wall Friction ◽  
Sliding Stability ◽  
The Stability ◽  
Seismic Forces ◽  
Design Factors ◽  
Similar Kind

The paper presents a methodology for seismic design of rigid watferfront-retaining wall and proposes simple design factors for the sliding stability under seismic condition. Conventional pseudostatic approach has been used for the calculation of the seismic forces, while for the calculation of the hydrodynamic pressure, Westergaard's approach has been used. In addition, the hydrodynamic force has been considered from both the upstream and downstream sides of the waterfront-retaining wall under free water condition of the backfill. Simplified expression for the calculation of the equivalent weight of the wall which would be needed to maintain sliding stability is presented. It has been observed that the presence of water both on the upstream and downstream sides of the wall has serious destabilizing effect on the stability of the wall. It is noticed that as the height of the water inside the backfill increased from 0.00 to a height equal to the height of the wall itself, i.e., the backfill is fully submerged, the weight of the wall needed for the later case is around 3 times more than what would be needed for the former case. Similar observations were also made by varying other parameters like the horizontal and vertical seismic acceleration coefficients, height of the water on the upstream side of the wall, and soil and wall friction angles. The pore pressure ratio and the inclination of the ground, however, did not have significant effect on the results. Due to nonavailability of the results of similar kind in literature, an exact comparison for the present results could not be made. Only partial comparison of the present results is made with an already existing methodology for the dry backfill case only, in which no presence of water has been considered on the other side of the wall. This comparison shows a good agreement with the present results. The proposed pseudostatic design factors for the case of wet backfill with the presence of water on both sides of the wall are claimed to be unique.

Stability of Water-Lubricated, Hydrostatic, Conical Bearings With Spiral Grooves for High-Speed Spindles

2001 ◽  
Vol 124 (2) ◽  
pp. 398-405 ◽  
Author(s):  
S. Yoshimoto ◽  
S. Oshima ◽  
S. Danbara ◽  
T. Shitara
Keyword(s):  
High Speed ◽  
Water Pressure ◽  
Rotating Shaft ◽  
Pressurized Water ◽  
High Speeds ◽  
Theoretical Predictions ◽  
The Stability ◽  
Stability Of Water ◽  
Spiral Grooves ◽  
Good Agreement

In this paper, the stability of water-lubricated, hydrostatic, conical bearings with spiral grooves for high-speed spindles is investigated theoretically and experimentally. In these bearing types, pressurized water is first fed to the inside of the rotating shaft and then introduced into spiral grooves through feeding holes located at one end of each spiral groove. Therefore, water pressure is increased due to the effect of the centrifugal force at the outlets of the feeding holes, which results from shaft rotation. In addition, water pressure is also increased by the viscous pumping effect of the spiral grooves. The stability of the proposed bearing is theoretically predicted using the perturbation method, and calculated results are compared with experimental results. It was consequently found that the proposed bearing is very stable at high speeds and theoretical predictions show good agreement with experimental data.

scholarly journals Advanced Modelling of KF Implemented Flying Wing

2019 ◽  
Vol 11 (4) ◽  
Author(s):  
Widanalage Dakshina ◽  
Thiwanka Fernando
Keyword(s):  
Extreme Condition ◽  
Flow Conditions ◽  
Ongoing Research ◽  
Stability And Control ◽  
Advanced Phase ◽  
Landing Gears ◽  
Two Phases ◽  
The Stability ◽  
And Control ◽  
Base Design

This research carries out the advanced phase in correlation with the previous published design of KF Implemented Flying Wing. At the primary stage the basic design was considered under omission of non-static components and turbulent conditions. At this stage the simulations have taken a step ahead with improved flow conditions and advanced modeling of the design. As per the design aspects the engines, pylons, landing gears and shape improvements were done with solid modeling. Due to the computational limitations this was divided in to two phases as cruising conditions with non-static components and further studies to be carried out in Takeoff and Landing conditions with extended landing gears. Under the stability and control conditions a separate research is being carried out in achieving the optimum capability. Propfan engine selected for extreme condition evaluations. The implementations were made without disrupting the base design which was presented in phase one basic simulation carried out prior to this. The simulation results deemed to be promising for the first stage as well as the effect of new components. The secondary target areas are to be carried out in further ongoing research as well

scholarly journals Integrated Simulation Modeling Approach for Investigating Pore Water Pressure Induced Landslides

2022 ◽  
Author(s):  
Sahila Beegum ◽  
P J Jainet ◽  
Dawn Emil ◽  
K P Sudheer ◽  
Saurav Das
Keyword(s):  
Pore Water ◽  
Factor Of Safety ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Simulation Models ◽  
Integrated Simulation ◽  
Hill Slope ◽  
Slope Factor ◽  
The Stability ◽  
The Hill

Abstract Soil pore water pressure analysis is crucial for understanding landslide initiation and prediction. However, field-scale transient pore water pressure measurements are complex. This study investigates the integrated application of simulation models (HYDRUS-2D/3D and GeoStudio–Slope/W) to analyze pore water pressure-induced landslides. The proposed methodology is illustrated and validated using a case study (landslide in India, 2018). Model simulated pore water pressure was correlated with the stability of hillslope, and simulation results were found to be co-aligned with the actual landslide that occurred in 2018. Simulations were carried out for natural and modified hill slope geometry in the study area. The volume of water in the hill slope, temporal and spatial evolution of pore water pressure, and factor of safety were analysed. Results indicated higher stability in natural hillslope (factor of safety of 1.243) compared to modified hill slope (factor of safety of 0.946) despite a higher pore water pressure in the natural hillslope. The study demonstrates the integrated applicability of the physics-based models in analyzing the stability of hill slopes under varying pore water pressure and hill slope geometry and its accuracy in predicting future landslides.

scholarly journals Measurement of xylem water pressure using High-Capacity Tensiometer and benchmarking against Pressure Chamber and Thermocouple Psychrometer

2020 ◽  
Vol 195 ◽  
pp. 03014
Author(s):  
Roberta Dainese ◽  
Giuseppe Tedeschi ◽  
Thierry Fourcaud ◽  
Alessandro Tarantino
Keyword(s):  
Water Flow ◽  
Water Pressure ◽  
High Capacity ◽  
Ground Surface ◽  
Pressure Chamber ◽  
Rainwater Infiltration ◽  
Thermocouple Psychrometer ◽  
Earth Structures ◽  
Pressure Water ◽  
The Stability

The response of the shallow portion of the ground (vadose zone) and of earth structures is affected by the interaction with the atmosphere. Rainwater infiltration and evapotranspiration affect the stability of man-made and natural slopes and cause shallow foundations and embankments to settle and heave. Very frequently, the ground surface is covered by vegetation and, as a result, transpiration plays a major role in ground-atmosphere interaction. The soil, the plant, and the atmosphere form a continuous hydraulic system, which is referred to as Soil-Plant-Atmosphere Continuum (SPAC). The SPAC actually represents the ‘boundary condition’ of the geotechnical water flow problem. Water flow in soil and plant takes place because of gradients in hydraulic head triggered by the negative water pressure (water tension) generated in the leaf stomata. To study the response of the SPAC, (negative) water pressure needs to be measured not only in the soil but also in the plant. The paper presents a novel technique to measure the xylem water pressure based on the use of the High-Capacity Tensiometer (HCT), which is benchmarked against conventional techniques for xylem water pressure measurements, i.e. the Pressure Chamber (PC) and the Thermocouple Psychrometer (TP).

Étude de la réouverture de la lagune du Havre aux Basques. I. Modélisation numérique des conditions d'écoulement

1995 ◽  
Vol 22 (1) ◽  
pp. 55-71
Author(s):  
Y. Ouellet ◽  
A. Khelifa ◽  
J.-F. Bellemare
Keyword(s):  
Finite Element ◽  
Numerical Study ◽  
Element Model ◽  
Two Dimensional ◽  
Flow Conditions ◽  
Modélisation Numérique ◽  
Tidal Flows ◽  
Dimensional Finite Element ◽  
The Stability ◽  
La Madeleine

A numerical study based on a two-dimensional finite element model has been conducted to analyze flow conditions associated with different possible designs for the reopening of Havre aux Basques lagoon, located in Îles de la Madeleine, in the middle of the Gulf of St. Lawrence. More specifically, the study has been done to better define the depth and geometry of the future channel as well as its orientation with regard to tidal flows within the inlet and the lagoon. Results obtained from the model have been compared and analyzed to put forward some recommendations about choice of a design insuring the stability of the inlet with tidal flows. Key words: numerical model, finite element, lagoon, reopening, Havre aux Basques, Îles de la Madeleine.

scholarly journals Environmental impact of intensive farming in sloping areas

2018 ◽  
Vol 174 ◽  
pp. 01001
Author(s):  
Giovanni Bosco ◽  
Lucia Simeoni
Keyword(s):  
Pore Water Pressure ◽  
Water Pressure ◽  
Sprinkler Irrigation ◽  
High Yield ◽  
Qualitative And Quantitative ◽  
Intensive Farming ◽  
Yield Production ◽  
Large Water ◽  
The Stability ◽  
Irrigation Runoff

The increased demand for food causes intensive farming with high yield production and large water consumption to extend significantly. Depending on soil properties, seasonal rainfall, surface drainage and water resources, hence the consumption-infiltration balance, the ground water table might be raised or depleted; soils could be saturated or remain partly saturated with negative pore pressures. As a result sloping grounds may become prone to shallow slides, as mudflows, or deep seated movements, involving large volumes of soil, especially after rupture of major watering lines or after long uncontrolled irrigations. Within this framework the paper investigates the possible effects of replacing grassland with intensive apple farming on the stability conditions of slopes. Apples require frequent watering, especially during spring and summer to meet qualitative and quantitative productive standards. Also, sprinkler irrigation is often used to protect against hail. From the precipitation, irrigation, runoff, evaporation and plant transpiration balance, the evolution of the pore water pressure distribution within an average year is calculated. Then the modified shear strength of the unsaturated-saturated soils is determined and the factor of safety against sliding is calculated.

Sign in / Sign up

Export Citation Format

Share Document