scholarly journals Diffusion and flow across shape-perturbed plasmodesmata nanopores in plants

2021 ◽  
Vol 136 (8) ◽  
Author(s):  
Anneline H. Christensen ◽  
Howard A. Stone ◽  
Kaare H. Jensen
Keyword(s):  
Flow Rate ◽  
Radial Displacement ◽  
Plant Cells ◽  
Volumetric Flow Rate ◽  
Lubrication Approximation ◽  
Pore Shape ◽  
Transport Capacity ◽  
Pressure Driven Flow ◽  
The Impact ◽  
Pressure Driven

AbstractPlasmodesmata are slender nanochannels that link neighboring plant cells and enable the exchange of nutrients and signaling molecules. Recent experiments have demonstrated significant variability in the concentric pore shape. However, the impact of these geometric fluctuations on transport capacity is unknown. Here, we consider the effects on diffusion and advection of two ideal shape perturbations: a radial displacement of the entire central desmotubule and a harmonic variation in the cytoplasmic sleeve width along the length of the pore. We use Fick’s law and the lubrication approximation to determine the diffusive current and volumetric flow rate across the pore. Our results indicate that an off-center desmotubule always increases the pressure-driven flow rate. However, the diffusive current is only enhanced for particles comparable in size to the width of the channel. In contrast, harmonic variations in the cytoplasmic sleeve width along the length of the pore reduce both the diffusive current and the pressure-driven flow. The simple models presented here demonstrate that shape perturbations can significantly influence transport across plasmodesmata nanopores.

Evaluation of Design Characteristics for Animal Mortality Composting Systems

2021 ◽  
Vol 65 (1) ◽  
pp. 23-30
Author(s):  
Tiago Costa ◽  
Neslihan Akdeniz
Keyword(s):  
Moisture Content ◽  
Linear Relationship ◽  
Compressive Stress ◽  
Flow Rate ◽  
Volumetric Flow Rate ◽  
Airflow Rate ◽  
List Type ◽  
Design Characteristics ◽  
The Impact ◽  
Composting Systems

HighlightsDesign characteristics for animal mortality compost cover materials were tested.Compressive stress was applied to simulate the effects of the mortalities on cover materials.The highest permeability was measured for sawdust at 25% moisture content.A linear relationship was found between the volumetric flow rate and the power required to aerate the piles.Abstract. Composting is an aerobic process that relies on natural aeration to maintain proper oxygen levels. Air-filled porosity, mechanical strength, and permeability are among the essential parameters used to optimize the process. This study’s objective was to measure the physical parameters and airflow characteristics of three commonly used cover materials at four moisture levels, which could be used in designing actively aerated swine mortality composting systems. A laboratory-scale experiment was conducted to measure pressure drops across the cover materials as a function of the airflow rate and the material’s moisture content. Compressive stress was applied for 48 h to simulate the impact of swine mortalities on the cover materials. The power required to aerate each material was determined as a function of volumetric flow rate and moisture content. As expected, air-filled porosity and permeability decreased with increasing bulk density and moisture content. The highest average permeability values were measured at 25% moisture content and ranged from 66 × 10-4 to 70 × 10-4 mm2, from 161 × 10-4 to 209 × 10-4 mm2, and from 481 × 10-4 to 586 × 10-4 mm2 for woodchips, ground cornstalks, and sawdust, respectively. For the range of airflow rates tested in this study (0.0025 to 0.0050 m3 s-1 m-2), a linear relationship (R2 = 0.975) was found between the volumetric flow rate (m3 s-1) and the power required to aerate the compost pile (W per 100 kg of swine mortality). Keywords: Airflow, Darcy’s law, Livestock, Modeling, Permeability, Pressure drop.

Blade coating analysis of viscous nanofluid having Cu–water nanoparticles using flexible blade coater

2020 ◽  
Vol 36 (4) ◽  
pp. 348-367 ◽  
Author(s):  
Marya Kanwal ◽  
Xinhua Wang ◽  
Hasan Shahzad ◽  
Yingchun Chen ◽  
Hui Chai
Keyword(s):  
Pressure Gradient ◽  
Shooting Method ◽  
Volume Fraction ◽  
Volumetric Flow Rate ◽  
Lubrication Approximation ◽  
Nanoparticle Volume Fraction ◽  
Porous Substrate ◽  
Flow Equations ◽  
The Impact ◽  
Blade Coating

This article presents the blade coating analysis of viscous nanofluid passing over a porous substrate using a flexible blade coater. Water-based copper nanoparticles are considered to discuss the blade coating process. The lubrication approximation theory is applied to develop the flow equations. The analytical solution is obtained for velocity, volumetric flow rate, and pressure gradient, while shooting method is applied to obtain the pressure, thickness, and load. Different models for dynamic viscosity have been applied to observe the impact of related parameters on pressure, pressure gradient, and velocity. These results are presented graphically. Interesting engineering quantities such as load, deflection, and thickness are computed numerically and are shown in the tabulated form. It is found that nanoparticle volume fraction increases the pressure gradient, pressure and has minor effects on velocity. For model 1, an increase in the volume fraction reduces the coating thickness, load, and deflection, while model 2 has opposite effects on the mentioned quantities. Also, model 2 has a greater impact on pressure and pressure gradient when compared to model 1.

Development of Pressure-Driven Flow Rate Control Valve with Hyper-Elastic Material

2020 ◽  
Vol 29 (3) ◽  
pp. 251-258
Author(s):  
Kibum Lee ◽  
Jaeyong Cho ◽  
Inseon Lee ◽  
Jeongseop Ahn ◽  
Choonsoo Jang ◽  
...  
Keyword(s):  
Flow Rate ◽  
Elastic Material ◽  
Rate Control ◽  
Control Valve ◽  
Hyper Elastic ◽  
Flow Rate Control ◽  
Pressure Driven Flow ◽  
Pressure Driven

scholarly journals Analytical Solution of Mixed Electroosmotic/Pressure Driven Flow of Viscoelastic Fluids between a Parallel Flat Plates Micro-Channel: The Maxwell Model Using the Oldroyd and Jaumann Time Derivatives

Micromachines ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 986
Author(s):  
Laura Casas ◽  
José A. Ortega ◽  
Aldo Gómez ◽  
Juan Escandón ◽  
René O. Vargas
Keyword(s):  
Flow Behavior ◽  
Viscoelastic Fluids ◽  
Volumetric Flow Rate ◽  
Maxwell Model ◽  
Parallel Plates ◽  
Flat Plates ◽  
Practical Applications ◽  
Low Viscosity ◽  
Pressure Driven Flow ◽  
Pressure Driven

In the present work, an analytical approximate solution of mixed electroosmotic/pressure driven flow of viscoelastic fluids between a parallel plates microchannel is reported. Inserting the Oldroyd, Jaumann, or both time derivatives into the Maxwell model, important differences in the velocity profiles were found. The presence of the shear and normal stresses is only close to the wall. This model can be used as a tool to understand the flow behavior of low viscosity fluids, as most of them experiment on translation, deformation and rotation of the flow. For practical applications, the volumetric flow rate can be controlled with two parameters, namely the gradient pressure and the electrokinetic parameter, once the fluid has been rheologically characterized.

scholarly journals EXPERIMENTAL ASSESSMENT OF THE IMPACT OF ASYMPTOMATIC GAS EMBOLI ON THE VESSEL WALL

2013 ◽  
Vol 13 (04) ◽  
pp. 1350064
Author(s):  
LINXIA GU ◽  
ERIC L. CUTLER
Keyword(s):  
Shear Stress ◽  
Flow Rate ◽  
Vessel Wall ◽  
Gas Bubbles ◽  
Volumetric Flow Rate ◽  
Injection Rate ◽  
Vascular Flow ◽  
Cardiovascular Flow ◽  
Forced Air ◽  
The Impact

Quantitative evaluation of shear stress in the vessel wall due to the presence of asymptomatic gas emboli is lacking. The goal of this work was to assess the impact of chronic asymptomatic gas emboli on the risk of atherosclerosis through a custom-built cardiovascular flow simulator. Gas bubbles were created by forced air from a syringe pump. The influences of embolism injection rate, pulse rate, and time-averaged flow rate on the wall mean shear stress were investigated at resting and elevated heart rate conditions. The recorded pressure and volumetric flow rate from 24 experimental settings with four repetitions each were used to calculate the mean wall shear stress (MWSS). A directly inverse relationship between gas embolus rate and MWSS in the vessel, particularly at low vascular flow and diminished pulse rates was subsequently found. This study established a positive correlation between gas bubbles in the bloodstream and diminished MWSS, which implied a potential onset of atherosclerosis.

Pressure-driven flow across a hyperelastic porous membrane

2019 ◽  
Vol 871 ◽  
pp. 742-754 ◽  
Author(s):  
Ryungeun Song ◽  
Howard A. Stone ◽  
Kaare H. Jensen ◽  
Jinkee Lee
Keyword(s):  
Pressure Drop ◽  
Flow Rate ◽  
Darcy’S Law ◽  
Applied Pressure ◽  
Soft Materials ◽  
Porous Membrane ◽  
Darcy's Law ◽  
Membrane Thickness ◽  
Pressure Driven Flow ◽  
Pressure Driven

We report an experimental investigation of pressure-driven flow of a viscous liquid across thin polydimethylsiloxane (PDMS) membranes. Our experiments revealed a nonlinear relation between the flow rate $Q$ and the applied pressure drop $\unicode[STIX]{x0394}p$, in apparent disagreement with Darcy’s law, which dictates a linear relationship between flow rate, or average velocity, and pressure drop. These observations suggest that the effective permeability of the membrane decreases with pressure due to deformation of the nanochannels in the PDMS polymeric network. We propose a model that incorporates the effects of pressure-induced deformation of the hyperelastic porous membrane at three distinct scales: the membrane surface area, which increases with pressure, the membrane thickness, which decreases with pressure, and the structure of the porous material, which is deformed at the nanoscale. With this model, we are able to rationalize the deviation between Darcy’s law and the data. Our result represents a novel case in which macroscopic deformations can impact the microstructure and transport properties of soft materials.

The Effect of Hub Configuration on the Performance of an Air-Cooled Steam Condenser Fan

2020 ◽  
Author(s):  
Z. Meiring ◽  
S. J. van der Spuy ◽  
C. J. Meyer
Keyword(s):  
Flow Rate ◽  
Static Pressure ◽  
Axial Flow ◽  
Pressure Rise ◽  
Volumetric Flow Rate ◽  
Superior Performance ◽  
Design Point ◽  
Static Efficiency ◽  
Air Cooled Condensers ◽  
The Impact

Abstract Axial flow fans used in air-cooled condensers are typically analysed with smooth rounded hubs as they offer superior performance when compared to other hub configurations. However, such a hub configuration is impractical and may increase the manufacturing and installation costs of air-cooled condensers. As such, it is desirable to use a simpler, yet effective, hub configuration in order to reduce the installation cost. This paper assesses the impact that a simpler hub configuration may have on the performance of an axial flow fan. This is done through a comparison of three hub configurations: a cylindrical hub with a flat nose, a cylindrical hub with a hemispherical nose, and a disk hub, installed on the B2a-fan. Computational fluid dynamics modelling, utilising OpenFOAM, is used to simulate each hub configuration. It is found that the impact on performance due to hub configuration is dependent on the volumetric flow rate through the fan. A thin disk hub exhibits superior performance at low flow rates, resulting in a 8.4% improvement in total-to-static pressure rise and a 5.7% point improvement in total-to-static efficiency. As volumetric flow rate increases, the effectiveness of the disk hub configuration reduces while the hemispherical and flat nosed cylindrical hub configurations result in similar performance metrics at the design point flow rate. At above design point flow rate, the flat nosed cylindrical hub configuration shows an improvement in performance over the hemispherical nose cylindrical hub configuration, with a 9.5% increase in total-to-static pressure rise and a 5.1% point improvement in total-to-static efficiency.

Cooling Fan Model for Thermal Design of Compact Electronic Equipment: Improvement of Modeling Using PQ Curve

2009 ◽  
Author(s):  
Hajime Nakamura
Keyword(s):  
Flow Rate ◽  
Cfd Simulation ◽  
Axial Flow ◽  
Volumetric Flow Rate ◽  
Thermal Design ◽  
System Effect ◽  
Simple Method ◽  
Cooling Fans ◽  
The Difference ◽  
The Impact

In order to hasten the thermal design for forced convection electronic devices, cooling fans should be modeled to reduce a computational load. A fan-curve-model, which generates volumetric flow rate versus the characteristics pressure difference of a fan, is very simple and usually incorporated into commercial CFD codes. However, this model often results in an erroneous flow rate. In this work, both the experiments and the CFD simulation were performed around small axial-flow-fans of 30 and 40 mm in diameter. The measured PQ curve was applied to the fan model, and compared the result of the simulation to the experimental data. It was clarified that the major reason behind the disagreement was the difference in the pressure definition of the fan model from the PQ curve measured using a chamber. Based on this, a simple method was proposed to correct this definition. Also, the system effect, which is the impact of obstacles on the fan delivery curve, was investigated by setting a cylindrical obstacle at upstream or downstream proximity of the fan.

Impact Of Transurethral Resection Of Prostate On International Prostate Symptom Score And Peak Urinary Flow Rate

2020 ◽  
Vol 16 (1) ◽  
pp. 11-15
Author(s):  
Md Waliul Islam ◽  
Md Abul Hossain ◽  
Md Nurul Hooda ◽  
Kazi Rafiqul Abedin ◽  
Husne Ara
Keyword(s):  
Flow Rate ◽  
Transurethral Resection ◽  
Urine Volume ◽  
T Test ◽  
Urinary Symptoms ◽  
Urinary Flow Rate ◽  
Transurethral Resection Of Prostate ◽  
Urinary Flow ◽  
Paired Student ◽  
The Impact

Objectives: To evaluate urinary symptoms and quality of life in patient with BPH before and after TURP. To determine the impact of TURP on the urinary symptoms (IPSS) and peak urinary flow rate. Methods: This study is prospective study carried out between 2010 and 2011 in the department of Urology, National Institute of Kidney Diseases & Urology. Total 102 cases were selected purposively according to selection criteria. Each patient was observed and followed up at 8 weeks (1st visit), 16 weeks (2nd visit) 24 weeks (3rd visit) after transurethral resection of prostate (TURP). IPSS score, QOL score also recorded and uroflowmetry was done to see the peak urinary flow rate (Qmax) of urine and voiding time. USG was done to see post voidal residual urine volume and DRE also done in selected cases. Data was complied and statistical analysis were done using computer based software, Statistical Package for Social Science (SPSS), using paired ‘t’ test. A P value <0.05 was taken as significance. Results: Before TURP, IPSS range 17-25 and mean 21.61+2.43, after TURP, range 0-7 and mean 4.27+1.71). Hence a significant improvement of IPSS was found from 2 months to 6 months follow up after TURP. The change was tested using “paired student ‘t’ test”. Before TURP Qmax range 7-12.2 and mean was 9.96+1.69, which became range 18-25 and mean was 22.61+2.28 after TURP and therefore change of mean Qmax was 12.64+2.69. The change was tested using “paired student ‘t’ test”. The change was found significant (P<0.001). Conclusion: Transurethral resection of prostate resolves obstructive symptoms, rapid improvement of urinary flow rate Bangladesh Journal of Urology, Vol. 16, No. 1, Jan 2013 p.11-15

Recent data on the causative agent of pale green dwarf (Acholeplasma laidlawii var. granulum incertae sedis) in Ukraine: pathogenicityand virulence factors and host reactions

2015 ◽  
Vol 2 (1) ◽  
pp. 30-34
Author(s):  
K. Korobkova ◽  
V. Patyka
Keyword(s):  
Phenylalanine Ammonia Lyase ◽  
Proteolytic Enzymes ◽  
Physiological State ◽  
Plant Cells ◽  
Temporary Increase ◽  
Adhesive Properties ◽  
The Impact ◽  
Signaling Interactions ◽  
Pale Green

Contemporary state of the distribution of mycoplasma diseases of cultivated crops in Ukraine was analyzed. The changes of the physiological state of plant cells under the impact of mollicutes were investigated. It was demonstrated that there is temporary increase in the activity of peroxidase, catalase, polyphenoloxidase, phenylalanine-ammonia-lyase at the early stages of interaction. The adhesive properties are changed in the mollicutes under the impact of plant lectin; there is synthesis of new polypeptides. It was determined that the phytopathogenic acholeplasma is capable of producing a complex of proteolytic enzymes into the culture me- dium. It was concluded that when plant cells are infected with acholeplasma, a number of signaling interactions and metabolic transformations condition the recognition of pathogenesis and ensure the aggregate response of a plant to stress in the form of defense reactions. It was assumed that some specifi cities of the biology of phy- topathogenic acholeplasma determine their avoiding the immune mechanisms of plants and promote long-term persistence of mollicutes.

Sign in / Sign up

Export Citation Format

Share Document