scholarly journals Scintillating bolometers: A key for determining WIMP parameters

2014 ◽  
Vol 29 (19) ◽  
pp. 1443009 ◽  
Author(s):  
D. G. Cerdeño ◽  
C. Marcos ◽  
M. Peiró ◽  
M. Fornasa ◽  
C. Cuesta ◽  
...  
Keyword(s):  
Cross Section ◽  
Direct Detection ◽  
Massive Particle ◽  
Thermal Quenching ◽  
Good Energy Resolution ◽  
Discrimination Capability ◽  
Good Energy ◽  
Excellent Tool ◽  
Nuclear Structure Functions

In the last decade direct detection Dark Matter (DM) experiments have increased enormously their sensitivity and ton-scale setups have been proposed, especially using germanium and xenon targets with double readout and background discrimination capabilities. In light of this situation, we study the prospects for determining the parameters of Weakly Interacting Massive Particle (WIMP) DM (mass, spin-dependent (SD) and spin-independent (SI) cross-section off nucleons) by combining the results of such experiments in the case of a hypothetical detection. In general, the degeneracy between the SD and SI components of the scattering cross-section can only be removed using targets with different sensitivities to these components. Scintillating bolometers, with particle discrimination capability, very good energy resolution and threshold and a wide choice of target materials, are an excellent tool for a multitarget complementary DM search. We investigate how the simultaneous use of scintillating targets with different SD-SI sensitivities and/or light isotopes (as the case of CaF 2 and NaI ) significantly improves the determination of the WIMP parameters. In order to make the analysis more realistic we include the effect of uncertainties in the halo model and in the spin-dependent nuclear structure functions, as well as the effect of a thermal quenching different from 1.

scholarly journals A Search for Levels of 7Li Between 9·0 and 9·55 MeV Excitation

1959 ◽  
Vol 12 (3) ◽  
pp. 231 ◽  
Author(s):  
KH Purser
Keyword(s):  
Cross Section ◽  
Energy Resolution ◽  
Resonance Structure ◽  
Good Energy Resolution ◽  
Good Energy ◽  
The Cross

The cross section of the reaction 6Li(n,3H)'He has been measured, with good energy resolution, over the neutron range 2�0--2�65 MeV. This corresponds to an excitation of 7Li from 9� 0 to 9� 55 MeV, a region in which photodisintegration experiments indicate the presence of one or more levels. No resonance structure was observed in this experiment and possible reasons for this are discussed.

scholarly journals A Dark Matter WIMP That Can Be Detected and Definitively Identified with Currently Planned Experiments

Universe ◽  
2021 ◽  
Vol 7 (8) ◽  
pp. 270
Author(s):  
Caden LaFontaine ◽  
Bailey Tallman ◽  
Spencer Ellis ◽  
Trevor Croteau ◽  
Brandon Torres ◽  
...  
Keyword(s):  
Dark Matter ◽  
Cross Section ◽  
Cross Sections ◽  
Direct Detection ◽  
Vector Boson ◽  
Massive Particle ◽  
Current Evidence ◽  
Channel Cross Section ◽  
Dark Matter Annihilation ◽  
The Cross

A recently proposed dark matter WIMP (weakly interacting massive particle) has only second-order couplings to gauge bosons and itself. As a result, it has small annihilation, scattering, and creation cross-sections, and is consequently consistent with all current experiments and the observed abundance of dark matter. These cross-sections are, however, still sufficiently large to enable detection in experiments that are planned for the near future, and definitive identification in experiments proposed on a longer time scale. The (multi-channel) cross-section for annihilation is consistent with thermal production and freeze-out in the early universe, and with current evidence for dark matter annihilation in analyses of the observations of gamma rays by Fermi-LAT and antiprotons by AMS-02, as well as the constraints from Planck and Fermi-LAT. The cross-section for direct detection via collision with xenon nuclei is estimated to be slightly below 10−47 cm2, which should be attainable by LZ and Xenon nT and well within the reach of Darwin. The cross-section for collider detection via vector boson fusion is estimated to be ∼1 fb, and may be ultimately attainable by the high-luminosity LHC; definitive collider identification will probably require the more powerful facilities now being proposed.

A quantitative approach to inner shell losses

1978 ◽  
Vol 36 (1) ◽  
pp. 526-527 ◽  
Author(s):  
R.D. Leapman ◽  
P. Rez ◽  
D.F. Mayers
Keyword(s):  
Energy Transfer ◽  
Cross Section ◽  
Cross Sections ◽  
Accurate Determination ◽  
Background Intensity ◽  
Core Excitation ◽  
Quantitative Basis ◽  
Cross Section Differential ◽  
Bound Electrons

Microanalysis by EELS has been developing rapidly and though the general form of the spectrum is now understood there is a need to put the technique on a more quantitative basis (1,2). Certain aspects important for microanalysis include: (i) accurate determination of the partial cross sections, σx(α,ΔE) for core excitation when scattering lies inside collection angle a and energy range ΔE above the edge, (ii) behavior of the background intensity due to excitation of less strongly bound electrons, necessary for extrapolation beneath the signal of interest, (iii) departures from the simple hydrogenic K-edge seen in L and M losses, effecting σx and complicating microanalysis. Such problems might be approached empirically but here we describe how computation can elucidate the spectrum shape.The inelastic cross section differential with respect to energy transfer E and momentum transfer q for electrons of energy E0 and velocity v can be written as

Profil Penyakit Malaria Di Rumah Sakit Islam Siti Rahmah Padang Tahun 2018

2020 ◽  
Vol 2 (2) ◽  
pp. 08-15
Author(s):  
Rahma Triyana ◽  
Salmi Salmi
Keyword(s):  
Observational Study ◽  
Frequency Distribution ◽  
Cross Section ◽  
Laboratory Tests ◽  
Age Group ◽  
Normal Range ◽  
Cross Sectional ◽  
West Sumatra ◽  
Severity Of The Disease

Malaria is one of the health problems in Indonesia, especially West Sumatra. Determination of the description of Malaria disease in an area is needed to determine the spread and severity of the disease. This study aims to determine the frequency distribution according to age, sex and place of residence, description of the types of Plasmodium causes of Malaria and hematological features in Malaria patients at Siti Rahmah Padang Hospital in 2018. This type of research is a descriptive observational study with an approach or design cross section (cross sectional). The frequency distribution of Malaria sufferers in Siti Rahmah Padang Hospital in 2018 according to the highest age was in the age group 21-30 years as many as 28 cases (36.8%), the highest sex among men was 46 (60.5%) and the highest number of residences was found in Koto Tangah sub-district there were 31 cases (40.8%). The type of Plasmodium found in Malaria cases in Siti Rahmah Padang Hospital in 2018 was P. vivax (73 cases (96.05%)) and P. falciparum (3 cases (3.95%)). The results of laboratory tests on Hb, hematocrit, platelet and leukocyte levels in Malaria positive patients in Siti Rahmah Padang Hospital in 2018 were in the normal range.

Profil Penyakit Malaria di Rumah Sakit Islam Siti Rahmah Padang Tahun 2018

2020 ◽  
Vol 2 (2) ◽  
pp. 08-15
Author(s):  
Rahma Triyana Y ◽  
Salmi Salmi
Keyword(s):  
Observational Study ◽  
Frequency Distribution ◽  
Cross Section ◽  
Laboratory Tests ◽  
Age Group ◽  
Normal Range ◽  
Cross Sectional ◽  
West Sumatra ◽  
Severity Of The Disease

Malaria is one of the health problems in Indonesia, especially West Sumatra. Determination of the description of Malaria disease in an area is needed to determine the spread and severity of the disease. This study aims to determine the frequency distribution according to age, sex and place of residence, description of the types of Plasmodium causes of Malaria and hematological features in Malaria patients at Siti Rahmah Padang Hospital in 2018. This type of research is a descriptive observational study with an approach or design cross section (cross sectional). The frequency distribution of Malaria sufferers in Siti Rahmah Padang Hospital in 2018 according to the highest age was in the age group 21-30 years as many as 28 cases (36.8%), the highest sex among men was 46 (60.5%) and the highest number of residences was found in Koto Tangah sub-district there were 31 cases (40.8%). The type of Plasmodium found in Malaria cases in Siti Rahmah Padang Hospital in 2018 was P. vivax (73 cases (96.05%)) and P. falciparum (3 cases (3.95%)). The results of laboratory tests on Hb, hematocrit, platelet and leukocyte levels in Malaria positive patients in Siti Rahmah Padang Hospital in 2018 were in the normal range.

scholarly journals New Method for Analysis of the Temporomandibular Joint Using Cone Beam Computed Tomography

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3070
Author(s):  
Sebastian Iwaszenko ◽  
Jakub Munk ◽  
Stefan Baron ◽  
Adam Smoliński
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cross Section ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Section Plane ◽  
New Approach ◽  
Volume Of Interest ◽  
Gap Width

Modern dentistry commonly uses a variety of imaging methods to support diagnosis and treatment. Among them, cone beam computed tomography (CBCT) is particularly useful in presenting head structures, such as the temporomandibular joint (TMJ). The determination of the morphology of the joint is an important part of the diagnosis as well as the monitoring of the treatment results. It can be accomplished by measurement of the TMJ gap width at three selected places, taken at a specific cross-section. This study presents a new approach to these measurements. First, the CBCT images are denoised using curvilinear methods, and the volume of interest is determined. Then, the orientation of the vertical cross-section plane is computed based on segmented axial sections of the TMJ head. Finally, the cross-section plane is used to determine the standardized locations, at which the width of the gap between condyle and fossa is measured. The elaborated method was tested on selected TMJ CBCT scans with satisfactory results. The proposed solution lays the basis for the development of an autonomous method of TMJ index identification.

Determination of collapse moment of different angled pipe bends with initial geometric imperfection subjected to in-plane bending moments

2021 ◽  
pp. 095440622199640
Author(s):  
Manish Kumar ◽  
Pronab Roy ◽  
Kallol Khan
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Circular Cross Section ◽  
Initial Imperfection ◽  
Bend Angle ◽  
Bending Moments ◽  
Element Analysis ◽  
Geometric Imperfection ◽  
Initial Geometric Imperfection

From the recent literature, it is revealed that pipe bend geometry deviates from the circular cross-section due to pipe bending process for any bend angle, and this deviation in the cross-section is defined as the initial geometric imperfection. This paper focuses on the determination of collapse moment of different angled pipe bends incorporated with initial geometric imperfection subjected to in-plane closing and opening bending moments. The three-dimensional finite element analysis is accounted for geometric as well as material nonlinearities. Python scripting is implemented for modeling the pipe bends with initial geometry imperfection. The twice-elastic-slope method is adopted to determine the collapse moments. From the results, it is observed that initial imperfection has significant impact on the collapse moment of pipe bends. It can be concluded that the effect of initial imperfection decreases with the decrease in bend angle from 150∘ to 45∘. Based on the finite element results, a simple collapse moment equation is proposed to predict the collapse moment for more accurate cross-section of the different angled pipe bends.

scholarly journals A thermo-mechanical machining method for improving the accuracy and stability of the geometric shape of long low-rigidity shafts

2021 ◽  
Author(s):  
Antoni Świć ◽  
Arkadiusz Gola ◽  
Łukasz Sobaszek ◽  
Natalia Šmidová
Keyword(s):  
Heat Treatment ◽  
Cross Section ◽  
Mechanical Treatment ◽  
Geometric Shape ◽  
Different Dimensions ◽  
Thermo Mechanical Treatment ◽  
Mechanical Machining ◽  
Simultaneous Heat ◽  
Accuracy And Stability

AbstractThe article presents a new thermo-mechanical machining method for the manufacture of long low-rigidity shafts which combines straightening and heat treatment operations. A fixture for thermo-mechanical treatment of long low-rigidity shafts was designed and used in tests which involved axial straightening of shafts combined with a quenching operation (performed to increase the corrosion resistance of the steel used as stock material). The study showed that an analysis of the initial deflections of semi-finished shafts of different dimensions and determination of the maximum corrective deflection in the device could be used as a basis for performing axial straightening of shaft workpieces with simultaneous heat treatment and correction of the initial deflection of the workpiece. The deflection is corrected by stretching the fibers of the stock material, at any cross-section of the shaft, up to the yield point and generating residual stresses symmetrical to the axis of the workpiece. These processes allow to increase the accuracy and stability of the geometric shape of the shaft.

Sign in / Sign up

Export Citation Format

Share Document