A CLOCK GATED SUCCESSIVE APPROXIMATION REGISTER FOR A/D CONVERSIONS

2014 ◽  
Vol 23 (02) ◽  
pp. 1450023
Author(s):  
MOHAMED O. SHAKER ◽  
MAGDY A. BAYOUMI
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Successive Approximation ◽  
Power Supply ◽  
Cmos Technology ◽  
Clock Signal ◽  
Switching Activity ◽  
Successive Approximation Register ◽  
Simulation Results ◽  
Data Switching

A novel low power clock gated successive approximation register (SAR) is proposed. The new register is based on gating the clock signal when there is no data switching activity. It operates with fewer transistors and no redundant transitions which makes it suitable for low power applications. The proposed register consisting of 8 bits has been designed up to the layout level with 1 V power supply in 90 nm CMOS technology and has been simulated using SPECTRE. Simulation results have shown that the proposed register saves up to 75% of power consumption.

scholarly journals A Digital-to-Time Converter for Time-Mode Successive-Approximation Register Analog-to-Digital Converters

2021 ◽  
Author(s):  
Daniel Junehee Lee
Keyword(s):  
Power Consumption ◽  
Successive Approximation ◽  
Cmos Technology ◽  
Sar Adc ◽  
Least Significant Bit ◽  
Silicon Area ◽  
Analog To Digital ◽  
Power Efficient ◽  
Successive Approximation Register ◽  
Simulation Results

file:///C:/Users/MWF/Downloads/Lee, Daniel Junehee.The 8-bit digital-to-time converter (DTC) to be used for a time-mode successive-approximation register analog-to-digital converter (SAR ADC) with a minimum power consumption and silicon area is presented. The architecture and the drawbacks of a conventional voltage-mode SAR ADC are discussed. The principle of time-mode circuits and benefits of their applications to mixed-signal circuits are explained. The architecture of a time-mode SAR ADC is presented. The need for an area and power-efficient DTC to be used for a time-mode SAR ADC is discussed. The principle of a DTC is explained and prior works on a DTC are reviewed. The principle of a phase interpolator (PI), to be used for a DTC, is explained and prior works on digital PIs are reviewed. The design of the proposed DTC is presented. Each block of the proposed DTC is explained using schematic and layout views. Optimal slope of the input of the PI and the condition for linear phase interpolation are investigated. Simulation results of the proposed DTC designed in TSMC 65 nm 1.0 V CMOS technology are provided. According to simulation results with BSIM4.4 device models only, the time resolution of 0.33 ps, a maximum operation frequency of 2.53 G Hz, the power consumption of 1.38 mW, and peak differential nonlinearity (DNL) and integral nonlinearity (INL) less than 0.14 least significant bit (LSB) and 0.49 LSB, respectively, for a nominal process (TT) and a temperature condition (27 C°) are achieved.

scholarly journals A Digital-to-Time Converter for Time-Mode Successive-Approximation Register Analog-to-Digital Converters

2021 ◽  
Author(s):  
Daniel Junehee Lee
Keyword(s):  
Power Consumption ◽  
Successive Approximation ◽  
Cmos Technology ◽  
Sar Adc ◽  
Least Significant Bit ◽  
Silicon Area ◽  
Analog To Digital ◽  
Power Efficient ◽  
Successive Approximation Register ◽  
Simulation Results

file:///C:/Users/MWF/Downloads/Lee, Daniel Junehee.The 8-bit digital-to-time converter (DTC) to be used for a time-mode successive-approximation register analog-to-digital converter (SAR ADC) with a minimum power consumption and silicon area is presented. The architecture and the drawbacks of a conventional voltage-mode SAR ADC are discussed. The principle of time-mode circuits and benefits of their applications to mixed-signal circuits are explained. The architecture of a time-mode SAR ADC is presented. The need for an area and power-efficient DTC to be used for a time-mode SAR ADC is discussed. The principle of a DTC is explained and prior works on a DTC are reviewed. The principle of a phase interpolator (PI), to be used for a DTC, is explained and prior works on digital PIs are reviewed. The design of the proposed DTC is presented. Each block of the proposed DTC is explained using schematic and layout views. Optimal slope of the input of the PI and the condition for linear phase interpolation are investigated. Simulation results of the proposed DTC designed in TSMC 65 nm 1.0 V CMOS technology are provided. According to simulation results with BSIM4.4 device models only, the time resolution of 0.33 ps, a maximum operation frequency of 2.53 G Hz, the power consumption of 1.38 mW, and peak differential nonlinearity (DNL) and integral nonlinearity (INL) less than 0.14 least significant bit (LSB) and 0.49 LSB, respectively, for a nominal process (TT) and a temperature condition (27 C°) are achieved.

Low Power FGSRAM Cell Using Sleepy and LECTOR Technique

2016 ◽  
Vol 4 (2) ◽  
pp. 333 ◽  
Author(s):  
Kanan Bala Ray ◽  
Sushanta Kumar Mandal ◽  
Shivalal Patro
Keyword(s):  
Low Power ◽  
Power Supply ◽  
High Stability ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Floating Gate ◽  
Power Supply Voltage ◽  
Operation Analysis ◽  
Sram Cell ◽  
Simulation Results

<em>In this paper floating gate MOS (FGMOS) along with sleep transistor technique and leakage control transistor (LECTOR) technique has been used to design low power SRAM cell. Detailed investigation on operation, analysis and result comparison of conventional 6T, FGSRAM, FGSLEEPY, FGLECTOR and FGSLEEPY LECTOR has been done. All the simulations are done in Cadence Virtuoso environment on 45 nm standard CMOS technology with 1 V power supply voltage. Simulation results show that FGSLEEPY LECTOR SRAM cell consumes very low power and achieves high stability compared to conventional FGSRAM Cell</em>

AN EFFICIENT LOW-POWER SIGMA-DELTA MODULATOR FOR MULTI-STANDARD WIRELESS APPLICATIONS

2012 ◽  
Vol 21 (04) ◽  
pp. 1250028 ◽  
Author(s):  
B. HODA SEYEDHOSSEINZADEH ◽  
MOHAMMAD YAVARI
Keyword(s):  
Low Power ◽  
Power Supply ◽  
Cmos Technology ◽  
System Level ◽  
Sigma Delta Modulator ◽  
Sigma Delta ◽  
Wireless Applications ◽  
Design And Implementation ◽  
Simulation Results ◽  
System Level Simulations

This paper describes the design and implementation of a reconfigurable low-power sigma-delta modulator (SDM) for multi-standard wireless communications in a 90 nm CMOS technology. Both architectural and circuital reconfigurations are used to adapt the performance of the modulator to multi-standard applications. The feasibility of the presented solution is demonstrated using system-level simulations as well as transistor-level simulations of the modulator. HSPICE simulation results show that the proposed modulator achieves 76.8/78.9/80.8/85/89.5 dB peak signal-to-noise plus distortion ratio (SNDR) within the standards WiFi, WiMAX, WCDMA, Bluetooth and GSM with the bandwidth of 12.5 MHz, 10 MHz, 1.92 MHz, 0.5 MHz, and 250 kHz, respectively, under the power consumption of 37/37/12/5/5 mW using a single 1 V power supply.

A Novel CNFET Technology Based 3 Bit Flash ADC for Low-Voltage High Speed SoC Application

2015 ◽  
Vol 19 ◽  
pp. 19-36 ◽  
Author(s):  
P.A. Gowri Sankar ◽  
G. Sathiyabama
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Circuit Design ◽  
Field Effect ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Flash Adc ◽  
Simulation Results

The continuous scaling down of metal-oxide-semiconductor field effect transistors (MOSFETs) led to the considerable impact in the analog-digital mixed signal integrated circuit design for system-on-chips (SoCs) application. SoCs trends force ADCs to be integrated on the chip with other digital circuits. These trends present new challenges in ADC circuit design based on existing CMOS technology. In this paper, we have designed and analyzed a 3-bit high speed, low-voltage and low-power flash ADC at 32nm CNFET technology for SoC applications. The proposed ADC utilizes the Threshold Inverter Quantization (TIQ) technique that uses two cascaded carbon nanotube field effect transistor (CNFET) inverters as a comparator. The TIQ technique proposed has been developed for better implementation in SoC applications. The performance of the proposed ADC is studied using two different types of encoders such as ROM and Fat tree encoders. The proposed ADCs circuits are simulated using Synopsys HSPICE with standard 32nm CNFET model at 0.9 input supply voltage. The simulation results show that the proposed 3 bit TIQ technique based flash ADC with fat tree encoder operates up to 8 giga samples per second (GSPS) with 35.88µW power consumption. From the simulation results, we observed that the proposed TIQ flash ADC achieves high speed, small size, low power consumption, and low voltage operation compared to other low power CMOS technology based flash ADCs. The proposed method is sensitive to process, temperature and power supply voltage variations and their impact on the ADC performance is also investigated.

Low-Power Capacitor-Splitting DAC with Mixed Switching Schemes for SAR ADCs

2018 ◽  
Vol 27 (10) ◽  
pp. 1850161 ◽  
Author(s):  
Hao Wang ◽  
Lungui Zhong ◽  
Guocheng Zhang
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Successive Approximation ◽  
Switching Scheme ◽  
Successive Approximation Register ◽  
Switching Power ◽  
Switching Energy ◽  
Switching Method ◽  
Analogue To Digital

A low-power capacitor-splitting digital-to-analogue converter (DAC) for successive approximation register (SAR) analogue-to-digital converters (ADCs) is proposed. During the first three bit cycles, with proper switching, there is no average switching power consumption. From the fourth bit cycle, one-side double-level switching scheme or the monotonic one is utilized based on the first two bits. When the first two bits are the same, one-side double-level switching scheme is chosen. Otherwise, the monotonic one is adopted. Thus, the proposed switching method only requires 5.27 CV[Formula: see text] average switching energy, 75.29% less compared to the Sanyal and Sun proposed one.

Thermally Reliable Ultra-Low-Power Voltage Reference to Regulator Converter

2020 ◽  
pp. 2150024
Author(s):  
George M. Joseph ◽  
Emmanouel George ◽  
Prathyush S. Pramod ◽  
Zameel Nizam ◽  
S. Krishnapriya ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Current Efficiency ◽  
Power Supply ◽  
Cmos Technology ◽  
Surveillance Systems ◽  
Voltage Reference ◽  
Power Budget ◽  
Line Load ◽  
Ultra Low Power

A regulated power supply with ultra-low-power consumption, high current efficiency, line, load and thermal stability is an essential part of any high precision electronic system with stringent power budget such as biomedical sensors or military surveillance systems. In this paper, we propose an ultra-low-power, MOSFET only, voltage reference to regulator convertor, proficient to work below 1 V with reduced power consumption. The proposed idea incorporates the provision to integrate any voltage reference module to a comparator-based circuit so as to transform it to a voltage regulator having similar temperature coefficient (TC) and line regulation as that of the interfaced voltage reference. It is also able to produce a reliable output accounting to load fluctuations. The circuit is simulated in 0.18[Formula: see text][Formula: see text]m CMOS technology using Cadence Virtuoso simulation suit. The complete circuit was found to draw a quiescent current of 319.9 pA with a notable current efficiency of 99.99997% at 27∘C on driving a load of 1[Formula: see text]mA along with a Power Supply Rejection Ratio (PSRR) of [Formula: see text][Formula: see text]dB additional to that of the reference. The proposed circuit will occupy an area of 0.00064[Formula: see text]mm2 and offer a TC as low as 1.7077 ppm/∘C. The whole MOS approach facilitates a reduction in die area and process simplicity.

New Design of Scan Flip-Flop to Increase Speed and Reduce Power Consumption

2015 ◽  
Vol 24 (10) ◽  
pp. 1550159 ◽  
Author(s):  
Ramin Razmdideh ◽  
Ali Mahani ◽  
Mohsen Saneei
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Switching Activity ◽  
Flip Flop ◽  
Reduce Power Consumption ◽  
Controlled Switching ◽  
Simulation Results

In this paper, a novel low-power and high-speed pulse triggered scan flip-flop is presented, in which short circuit current is controlled. Switching activity is decreased to reduce the consumed power of the scan flip-flop. Also, the total number of transistors through the path from input to the output is reduced and so the delay of the proposed scan flip-flop is decreased. Simulation results show 12% and 29% reduction in power consumption and delay of the proposed scan flip-flop, respectively. The results are given by comparison of our work with other scan flip-flops at 50% data switching activity.

scholarly journals A Ultra Low Power 12 Bit Successive Approximation Register for Bio-Medical Applications

2018 ◽  
Vol 7 (3.16) ◽  
pp. 98
Author(s):  
Manoj Kumar ◽  
Raj Kumar
Keyword(s):  
High Resolution ◽  
Low Power ◽  
Successive Approximation ◽  
Power Supply ◽  
Medical Applications ◽  
Clock Gating ◽  
Power Requirement ◽  
Ultra Low Power ◽  
Analog To Digital ◽  
Successive Approximation Register

Successive Approximation Register (SAR) analog to digital Converters (ADC) is favorable choice for the high resolution. As resolution of ADC increases, the no. of redundant cycles increases which increases power. So the Paper presents clock gated ADC with no redundant cycles/transition cycles for low power requirement and comparison between without Clock Gating and Clock Gated SAR. Using Simulation, Power consumption for Clock gated SAR 736.1nW at 1.8V power supply where as without Clock Gating SAR consumption is 54µW at 1.8 power supply.  

Sign in / Sign up

Export Citation Format

Share Document